A fishing channel for the average Joe . I'm a family man who loves to spend free time kayak fishing come along with me as I enter kayak fishing tournaments .learn new tricks techniques get new Gear to review as well as tackle subscription and different lures to try.
Пікірлер
This video was one of my inspirations to start my own channel. Haven't seen any videos from you for a while, hope everything is ok.
I really appreciate that. Everything's good at my end. Had some camera issues last year, so i didn't get any more footage in and it's just been a really super busy summer for me, but I have some new cameras and hoping to get some videos out soon.. tight lines!
Can you publish the rough dimensions of the front base for the motor? I have an Outlaw 11.5 on order and want to have a base ready for the front when it finally gets here. I really only need to know what size board of 1/2 inch HPDE to order from Amazon, is 12”x12” sufficient? I will make my own template with cardboard to cut it. (My mount will be just a basic one for a 55lb Newport with Autoboat.) Thanks, nice video.
I apologize i just saw this comment. I can get you dimension this weekend if you still need it. Tight lines
Hey dad
Not sure you knew this but they don't recommend going lower than 50% depth of discharge on deep cycle lead acid batteries or it begins to lose capacity. I know you didn't go that low on this trip.
What is that bag on the side of your seat?
They are called chromacast bags off of Amazon. A fraction of the price of the perception bags and a perfect fit
What Fish Finder do you have? Do you have a video on mounting your Transducer if you have the larger one?
I have the garmin striker 5 cv... i go over the mounting of it a little bit in my motor mount video.. Thanks for watching tight lines!
Is there any jerky movement with the spot lock?
Only if you have the speed high when you switch to spotlock and then go to move again... It remembers your last setting so just make sure you turn down the speed first
Hi…are you able to hold position with the spot lock or it moves around?….thanks
I can hold positions accurately even in high wind
Nice vid! I saw u at the ramp! Treacherous conditions that day
It was a crazy day i sure hope you did better then me 😆
What is with the kilometers instead of m.p.h.?!
What connections for power to the battery box? The ones you said you wish you would have gotten first time that lock in.
I bought a outlaw a few months back I installed the Xi3 Motor-guide in the front as well. I didn’t screw down the front(I copied 334tactical) but I didn’t like just leave the front lip without securing it to the kayak. I also didn’t want to screw more holes as well where I didn’t have access from the hull. So I used heavy duty marine sealant and clamped it down for a good solid 12 hours and also use black silicone heavy duty all purpose for the final touch to make it look pretty lol! It’s super solid! The way I did it almost looks like the bracket was made with the kayak!
Im glade that worked for you. I had a tournament last month where the waves got crazy. I came down from one wave and the well nuts in the front let go i had to go back to shore and zip tie together
@@summertonfishing119 damn that’s terrible. I use heavy duty marine sealant clamps than I sealed it with heavy duty silicone for extra support. Expensive but it won’t go anywhere! And it’s extra waterproof!
I also upgraded to the more expensive Mount. Which allows a lot more areas to Mount the front. I’m going to eventually add an extra support strap in the front just cause I can but haven’t got that far yet!
I’d pay you to set mine up. Too bad I’m in the states.
Glad too see the build hold up I just bought the same trolling motor and kayak!
She handled very well. It was certainly a true test 😆. The motor is a game changer you're going to love it
I just finished mine today.. i watched your video countless times.. what size and length bolts did you use for the front?
What size screws did you end up using.. and how long are they
😂 Promo'SM
Good job Mike!
Hey I’m going to be putting a trolling motor on my outlaw also. I’m curious as to why you chose to put on the front instead of the molded area on the back. I’ve been watching a lot of different videos and seen both thanks
Due to the hull design. It is much easier to control in the wind having a bow mount (I.M.O)
@@summertonfishing119 thanks that’s the answer I needed to hear because I didn’t think of that until you said it. Thanks a lot for the input. I will definitely be stealing some of your ideas
Absolutely steal away! Lol...one thing to consider...i am about to rewire the kayak tomorrow because the wire i used off Amazon got water in the wire casing. Spend the money on good soild core 6ga wire
What size box is that for the battery?
What size breaker for battery?
I used a 60amp.......im about to redo the wiring this week the stuff i got for Amazon is garbage
How are you keeping the water from flowing in from the scupper holes... I'm doing this at as I'm watching... your videos are super informative.. thank you
They bubble a bit but i dont get alot of water coming up at all it stay pretty dry. I dont bother pluging the holes because sometimes im in some crazy weather and you want the water to escape fast.Thanks so much for watching.. tight lines 🎣
Great video
Watching the vid now. Smashing them right away. Good job See ya at balsam lake. I’ll say hi if I see ya.
Thanks for watching...if your staying at balsam provincial park come stop in for a drink 🍻
I just hit the subscribe button.. keep up the great content.. it's AWESOME
Thank you so much i really appreciate it ....much more to come...tight lines 🎣
Great video. I have a XI3 on my sons kayak but he is going to pick his kayak up when he gets out of the Marine Corps. So I will have my motor but no boat. Where did you get the mount for yours, thanks?
I picked mine up on Amazon i found it was the best price. I believe it was $100 canadian. Thanks for watching
I am definitely getting it.. your videos are solid.. thank you VERY much for the content
Thanks so much for watching.....it's definitely worth it!
damn i want some steaks now😅
Lol best I've ever had 😋
Nice to watch your video. I was fishing that tournament also. My 1st kayak tournament. I messed up and didn’t know there were boundaries and was fishing the south shore area. Found out when I went to summit my 2nd fish.
Don't let it discourage you.i messed up my first tournament and wrote down my identifier wrong luckily the judge got a hold of me and they only disqualified my first fish
Good recap Mike and thanks for the shout out
Been waiting to see you finally test this out, I’ve got an Outlaw and I’m so jealous, if only my wife could understand how much I need the xi3 for mine 😂
Lol I think I just annoyed my wife to the point of letting me get it 😄 it's definitely a game changer!
@@summertonfishing119 noted, I am indeed working on that! Haha
I'm very curious about the spot lock, did you try it? How is GPS anchor performace on the outlaw 11.5?
It was absolutely amazing.. .I did my tournament 2 weeks ago and fished a river with really strong current. I didn't move an inch
did the pedals add much leg comfort and back support ?
A huge help. It was a massive comfort increase.
@@summertonfishing119 thank you
I’d be concerned with the pin sliding out and losing everything.,
The pin locks in and also has a spot for a suit case lock if worried about it . Just finished my first tournament in some insane weather and handled very well 👌
@@summertonfishing119 awesome. Good to know. I’m a bigger guy with a pacemaker 260 6,1 and been looking for a stable kayak one that I can modify to add something to the stern . Thank you
This is certainly a great kayak at the price point for stability and definitely better suited for a stern mount motor then a bow mount.(easier to install then a bow and better balance)
WhaT size rivets did you ised? I didnt hear you say... I'm new to rivits 😅
Lol it was a couple years ago so I don't quite remember 😅 but I'll have a look tonight and get back to you! Thanks for watching
Nice video I just got done doing the same motor on my 11.5. I just got done with it this weekend then saw your video lol. Haven’t had it in the water yet but I’m excited. Thanks for making the video
Thanks for watching..I'm still waiting to get mine out to test. (Been over 2 months). But the ice should be gone this week so I look forward to testing it next weekend. Tight lines 🎣
I’m a little worried about how it’s going to balance out. I got the 100 hour Dakota lithium battery in the back. Hope it’s ok. I really don’t want to buy another one. You should make a video when you get it in the water. Thanks again.
Great video, I love that you didn’t edit out the mistakes to make it seem like it was a quick and flawless install. One suggestion I’d make for that deck plate is to make it 3-4” longer than the boat. That way you can cut in a carry handle into the front. It would also give you enough material to make a “sandwich “ plate and not have to use well nuts or drill extra holes in the boat. Just add some spacer blocks where the gap is for the carry handle and in front of the handle so that you can use another piece of UHMW to sandwich the existing handle. That would secure the front of the plate without drilling or using clamps. Best of luck this season buddy.
That's a great idea . I may end up changing it, still waiting for the ice to melt so I can test it out. I've definitely been wondering how it will hold up if it accidentally hit something. I really appreciate the feedback. Tight lines 🎣
Where is the motorguide??
This was a trip I did last summer. Unfortunately the lakes are all frozen up here 😕 .it will be at least a month before they start to open up to give me a chance to try it out
@@summertonfishing119 need to bring it down here to Texas friend!
That would certainly be a dream. Hopefully someday I'll make my way down there
That is slick. You definitely need to post a video in action once you can get on the water. The advantage for the bow mounted trolling motor like this is being able to stand and use the remote to steer. Most of the time, you can set the direction and fish while moving slowly. I have a stern mounted trolling motor on my Outlaw 11.5 with toe steering pedals installed. So, I have to stay seated to steer while moving. I love it though. I am hands-free except the occasional adjustment to the speed on my PWM controller. I too have the breaker where I can reach it for the trolling motor. You will need to install front navigational lights. I just use a Vizipole for my 360 in the back. I have it in one of the rod holders on my crate. I did the same thing and watched videos on KZread and basically picked pieces of what I watched t put together my own install. I think I could do it again and have a much cleaner look...not to mention it would be much easier to do in a shorter time frame. I have a 100ah Lithium battery and that is a bit overkill. I can fish for 10hrs and still have just over 50% left...that is fishing with winds in the 12-15mph range. I can cover a ton of water on one charge. I have never come close to running out of juice. I am curious to hear how it performs in wind and chop...does the front get swamped too much and does the back end spin around too much...that will be interesting to compare to a stern mounted motor on this kayak.
I'm definitely excited to test it.the weather up here is getting colder again so it may still be a couple months yet before I can test.im glad to hear how long your battery lasts .I'm typically on the water for 10 or 12 hours. Mine isn't lithium but I'm hoping to get a full day. Only one way to find out. I will definitely be making a video of my test run as soon as this ice is gone. Thanks for watching and tight lines 🎣
I did this to my outlaw and noticed the motor was just too heavy in the front it would easily dive under waves from boats, even with battery in the back. I then mounted a 12 volt brushless TM on the back with foot controls. i fish the gulf a lot and didnt want saltwater constantly dousing my motor
I appreciate the info. I still have about 2 months before the ice is gone here,so it will be awhile before I can test it.thats what I was afraid of which is why I chose lead acid instead of lithium. I was hoping it would offset the weight 😕
Thanks for the video!!! Getting ready to start this install myself, will reference this frequently. Really like your use of less expensive items instead of the overpriced items targeted at kayaks.
Thanks for watching!!! I hope it helped.
I have a deck plates in the same front area however I am a pretty skinny dude but I am having a lot of trouble being able to reach through the deck plate in order to ratchet the two inside bolts down. How did you go about it or any advice?
It certainly wasn't easy. I had to put my arm in on an angle to the bow and bent at the elbow as if i was carrying something, and then gently forced my forearm through the hole 🕳
So what was the total thickness needed for the pvc mounting board plate?
I went with 1" you could get away with 7/8".thanks for watching. Tight lines 🎣
Great video..question, how did you secure the case to your Kayak? I was thinking heavy duty Velcro.
Thanks for watching... my kayak has bungee mesh in the front so I keep the box under there and run the power to my mount
Also, when you mounted your fish finder bracket to your case, did you mount it with one bolt or multiple screws? Thanks
@davelyons2601 I bolted the main base with two stainless steel bolts. cut flush under the foam...thanks for watching. Tight lines
How are the foot braces holding up? Would you recommend the same installation method after some use?
There holding up great they have taken alot of abuse the last two seasons I'm definitely happy with how they turned out
Thanks for the video and the tips. How has this particular hatch been working for you? Any Leaks? Also, what is the specific product or model hatch plate that you installed? Did you install the same model hatch plate in all three locations? Many Thanks!
The hatches have worked well I never did get around to do the third one yet.the only time I've had a little bit of water go in was a really rough day on the water during a tournament were the bow went completely underwater quit a few times but it wasn't much.as for the model it was just a generic one off of Amazon for $17can
@@summertonfishing119 pic of your anchor trolley set-up?
Hello, congrats for you first trout!! That white thing in the left side track is an anchor system? How did you attach it? Thanks for the video.
It's actually a retractable clothing line that I got for $10 at Walmart and changed the line inside to paracord it came on the aluminum bracket that's attached to the kayak and just used some t bolts in the track to mount it. Thanks for watching!
Super! This morning I was in Bass Pro Shop , looking at the same pelican case and thinking about mounting my garmin 73sv to it. And bam! Here is your video! Thank you!
Haha that's a sign 😄 thanks for watching
@@summertonfishing119 the pleasure is mine! 😀
@@summertonfishing119 just stopped by Harbour Freight and got wonderful pelican replica: apache 3800 weatherproof protecting case. It perfectly fits my 73sv and battery. Highly recommend.
I keep hearing about that store sounds great not sure if we have it in canada but it sounds like our Princess Auto. I'm hoping to upgrade to side imaging next year so it good to know I should be able to use the same case!
What size box is this one ?
Awesome to have the first trout man. 🎣💪 Fish strong.
Thanks man certainly a day I won't forget and looking forward to getting on some bigger ones in the future
Congrats on the lake trout brother, great video
Thank you so much for the support
Excellent video bro, thanks for that.... hey how do you feel with the distance of fish finder?
Thanks for the support... I have gotten use to were the fish finder is but I would certainly like it closer unfortunately mounting it closer gets in the way of paddling
@@summertonfishing119 I have a 7 inch ff and im looking the best place but i like to paddle too so maybe i will be doing the same as you.