Shouldnt the 3rd axis be set when bow is @ full draw?
@charliedelta113610 күн бұрын
I have watched this 45 times… I get it now.. you’re so vague so that you get more views……
@4thholebridge12 күн бұрын
Hamskea's video shows the level for 2nd & 3rd axis is attached to the rail.
@ShanesSnlmonologue15 күн бұрын
So you are sighting in at 20... but what tape are you marking the 20? You said 6, but what is that?
@Ope-Outdoors16 күн бұрын
Love my Tetra! 💪
@jimford889216 күн бұрын
❤
@douglasscholl4681Ай бұрын
I started archery two years ago after therapy made me feel worse than when I walked in. Having a bow, shooting in the yard, shooting local 3-D shoots is some of the best mental health sessions I've ever had. Glad I'm finding these stories, more of these need to be told.
@douglasscholl4681Ай бұрын
Archery has been better for me that any therapy session I've ever sat through.
@NickHill-jc7dlАй бұрын
I’m also having issues not moving my wheel, I’m bottomed out on both top pin and vertical infinite bar, but still having to scroll to about 11 on sight in tape to hit the target at 20, 27.5” draw, 60 lbs 417 grain arrow
@daviddellariva2 ай бұрын
Warning ‼️don’t buy this adapter‼️I have been through two of these adapters and they both had the same issue. The rod that fits into the macro adjustment has extremely poor tolerances. So no matter how much you tighten the windage lock, your scope will wiggle up and down a noticeable amount and cause excessive vibration with each shot. I was a fan of HHA not anymore I tried contacting customer service on this and they just gave me the runaround saying that it needed to be repaired. This is a design flaw. Make a micro adjust rod that has tighter tolerances, and there will be no issue. It’s a simple fix and I hope they would address it. I’m selling all of my products.
@chase-n-trails72573 ай бұрын
So helpful thank you.
@natestandley31243 ай бұрын
Jeremie is thinking “ ole man if you say my name one more time, I’m gonna break your face”
@4thholebridge4 ай бұрын
Camera operator could get considerably closer.😎
@RJ-qq8kb4 ай бұрын
My BowTech SS34, 55#, wears a Fuse fixed pin sight set at 15 and 25 yards. Can the Tetra RYZ be calibrated for those distances? An adjustable bottom pin would be nice.
@MXRIDER14YZ4 ай бұрын
Best sight on the market and no one’s talking about it
@Sly9mm4 ай бұрын
What's your draw weight, draw length and arrow weight? I'm having a hell of a time staying at zero with my top pin without moving the wheel- 30" draw, 65#, 440 grain arrows-
@Life-of-Bluegrass_Music5 ай бұрын
Being a police officer. Just don't work in a Liberal city or State.
@robhagelberg18745 ай бұрын
I bought this plate with the understanding that it would work on the Optimizer Tetra.....it doesn't. Kinda misleading because it is in the Tetra line. plate is to small...screw holes don't line up.
@HHASportsOptimizer5 ай бұрын
Rob, give us a shout today between 8 AM CT and 4 PM CT. We will get you taken care of!
@jacobhaley95136 ай бұрын
How much distance did he get with 65lb draw?
@jackbuendgen3895 ай бұрын
I have one of their 2 pin sights. I used sight tape 47 on it and I can get out to 130 using my second pin. My bow set up is set at 27" draw at 70# so I'm guessing our speeds are similar. So I'm guessing he can get out to 120
@warddanger6 ай бұрын
great story!!!
@bdakin916 ай бұрын
again no mention of the 2nd pin or pin gap...
@backyardbountiesextra76833 ай бұрын
The pin gap isn’t adjustable since they share a pin, it’s different for every bow.
@bdakin916 ай бұрын
Terrible....Not one word about the second pin or pin gap.
@RJ-qq8kb4 ай бұрын
That would be nice to know and I would think it’s highly variable due to draw weight and arrow configuration.
@stephengatley81446 ай бұрын
Hi guys, I shoot curently the Tetra RYZ Tournament 4-7in & the Tetra RYZ hoyt edition picatiny. Can i please get a 9 inch Tournament specific sight & scope for my coming Hoyt Stratos 40, please wink if a new sight is coming to market... Love The Product Guys!
@Life-of-Bluegrass_Music6 ай бұрын
That is a loud bow.
@zacchurch5026 ай бұрын
Ohhhhhhh if we can get that in a single pin 3 stack and maintain the adjustable needles on the sight tape 🔥🏹
@acohen52676 ай бұрын
Shot the Landslyde since it came out. Tried the Tetra Max and that is now all I shoot. Great products and fantastic customer service.
@jonathan_guerrero16 күн бұрын
What did you like more over the landslyde? I have also had a landlsyde since it came out and tomorrow I get my ryz X3 lol Gonna give it a shot and see which one I like more. I just hate how the landslyde doesn't have a 3rd pointer. So when I move the sight I know what my 1st pin and 3rd pin is but idk what distance my 2nd pin is set at.
@dylangotto42756 ай бұрын
Does it come in frame only?
@OutdoorsAllie6 ай бұрын
I dig it!
@Whopperjunior696 ай бұрын
Will there be a vertical pin version?
@WrxRallyFreak6 ай бұрын
Is that a new HHA sight light I see?
@Bowsonthebrain6 ай бұрын
I love watching hunts but Why would you have a video tutorial describing your product and not show what you’re talking about?
@mattboyden42976 ай бұрын
3 pins and 3 pointers on the dial ?
@Deuce_Dufresne6 ай бұрын
Ok I’m interested
@mxoutdoors287 ай бұрын
Question do you have to start at 20 yards then 60 yards when you start or can you just go straight to whatever yard you want
@craigchamblee576524 күн бұрын
Start at 20 ,then slowly work your way back to 60 moving the dial as you go back
@chokeout4127 ай бұрын
Well, I sighted in at 20 with the set up tape at zero. Then got decent groups at 60. This Omnia is fast (307fps) and it put me at sight tape 32. Then, when I shot at 80, I was two feet low. Any ideas why or the remedy? I replaced it with sight tape 34 but haven't had a chance to test it out yet. But, I can tell you that on sight tape 32, I had to put it on nearly 88 yards to get 80. So confused.
@frazilly17 ай бұрын
Thanks , this made absolutely no sense!
@millerbrosmediaoffgridflyf77677 ай бұрын
So if a guy wants the most yardage possible, would he use the bottom pin as the floater/mover?
@Sertao20137 ай бұрын
Why does the knob turn a full line mark without any pin movement ?Do something for me . Make sure the dial set screw is nice and tight and turn the dial and watch the sight pin . You can turn the dial a little bet either up or down without the pin moving at all . This is so annoying when setting the distance and trying to get back to the same spot every time . It seems to me that there is space between the gearing that is allowing this free play space . Why can't they make it so the slightest movement will move the pin ? The free play of the dial moving without the pin moving sucks for what they are charging for this sight . Its not just a one off thing . Its on every one I tried and I tried at lest 5 of them .
@chestnuts44448 ай бұрын
This is a terrible attachment. I can’t put my quiver on without hitting the sight dial or the windage adjustment. I had to cut pieces of arrows to replace those extenders, and now my quiver sticks way out. I still can’t make distance dial adjustments without taking off the quiver
@HHASportsOptimizer8 ай бұрын
This is an old video and we now have a new quiver bracket. Please contact our office and we will get you taken care of. Thank you! 800-548-7812
@troybrejc40808 ай бұрын
Awful video....can't see a damn thing!
@anthonyforfare72238 ай бұрын
Any chance of getting what the sight’s weight is?🤔 looked at site couldn’t find it.🥺
@dksizzr8 ай бұрын
Nice 👍
@troymuche89978 ай бұрын
HHA are great, just wish they were lighter
@upstreamer16618 ай бұрын
And cheaper.
@stephengatley81446 ай бұрын
@@upstreamer1661 You get what you pay for Mate!
@MorrisonAndCo.8 ай бұрын
Great job Jake! Awesome stuff here
@calebwolff59838 ай бұрын
Great company, great products! Cant wait to get my hands on a new one!
@lewiskurzawa60418 ай бұрын
Great new colors from a great company.
@jacobmancl74318 ай бұрын
Yes sir! All dovetails come with a mounting puck to mount to the side of the riser!
@fernandobelone38768 ай бұрын
Will the work on the new bear bows...
@webincomeincome87679 ай бұрын
Additional note. Sighted in only for the same fletching, arrow weight and point used.
@jasonharrell519110 ай бұрын
Q: When sighting my Tetra RYZ in, I’m all the down at the bottom of the infinity bar at 20 yards, in order to get my 20 yards top pin to be accurate I need to turn my wheel to about 39 in order for it to hit 20 yards. Is this correct? I can’t figure out any other way to adjust this to make my wheel “0” on the setup tape at 20 yards. I’m shooting a Matthews Drenaline but that shouldn’t matter.
Пікірлер
Shouldnt the 3rd axis be set when bow is @ full draw?
I have watched this 45 times… I get it now.. you’re so vague so that you get more views……
Hamskea's video shows the level for 2nd & 3rd axis is attached to the rail.
So you are sighting in at 20... but what tape are you marking the 20? You said 6, but what is that?
Love my Tetra! 💪
❤
I started archery two years ago after therapy made me feel worse than when I walked in. Having a bow, shooting in the yard, shooting local 3-D shoots is some of the best mental health sessions I've ever had. Glad I'm finding these stories, more of these need to be told.
Archery has been better for me that any therapy session I've ever sat through.
I’m also having issues not moving my wheel, I’m bottomed out on both top pin and vertical infinite bar, but still having to scroll to about 11 on sight in tape to hit the target at 20, 27.5” draw, 60 lbs 417 grain arrow
Warning ‼️don’t buy this adapter‼️I have been through two of these adapters and they both had the same issue. The rod that fits into the macro adjustment has extremely poor tolerances. So no matter how much you tighten the windage lock, your scope will wiggle up and down a noticeable amount and cause excessive vibration with each shot. I was a fan of HHA not anymore I tried contacting customer service on this and they just gave me the runaround saying that it needed to be repaired. This is a design flaw. Make a micro adjust rod that has tighter tolerances, and there will be no issue. It’s a simple fix and I hope they would address it. I’m selling all of my products.
So helpful thank you.
Jeremie is thinking “ ole man if you say my name one more time, I’m gonna break your face”
Camera operator could get considerably closer.😎
My BowTech SS34, 55#, wears a Fuse fixed pin sight set at 15 and 25 yards. Can the Tetra RYZ be calibrated for those distances? An adjustable bottom pin would be nice.
Best sight on the market and no one’s talking about it
What's your draw weight, draw length and arrow weight? I'm having a hell of a time staying at zero with my top pin without moving the wheel- 30" draw, 65#, 440 grain arrows-
Being a police officer. Just don't work in a Liberal city or State.
I bought this plate with the understanding that it would work on the Optimizer Tetra.....it doesn't. Kinda misleading because it is in the Tetra line. plate is to small...screw holes don't line up.
Rob, give us a shout today between 8 AM CT and 4 PM CT. We will get you taken care of!
How much distance did he get with 65lb draw?
I have one of their 2 pin sights. I used sight tape 47 on it and I can get out to 130 using my second pin. My bow set up is set at 27" draw at 70# so I'm guessing our speeds are similar. So I'm guessing he can get out to 120
great story!!!
again no mention of the 2nd pin or pin gap...
The pin gap isn’t adjustable since they share a pin, it’s different for every bow.
Terrible....Not one word about the second pin or pin gap.
That would be nice to know and I would think it’s highly variable due to draw weight and arrow configuration.
Hi guys, I shoot curently the Tetra RYZ Tournament 4-7in & the Tetra RYZ hoyt edition picatiny. Can i please get a 9 inch Tournament specific sight & scope for my coming Hoyt Stratos 40, please wink if a new sight is coming to market... Love The Product Guys!
That is a loud bow.
Ohhhhhhh if we can get that in a single pin 3 stack and maintain the adjustable needles on the sight tape 🔥🏹
Shot the Landslyde since it came out. Tried the Tetra Max and that is now all I shoot. Great products and fantastic customer service.
What did you like more over the landslyde? I have also had a landlsyde since it came out and tomorrow I get my ryz X3 lol Gonna give it a shot and see which one I like more. I just hate how the landslyde doesn't have a 3rd pointer. So when I move the sight I know what my 1st pin and 3rd pin is but idk what distance my 2nd pin is set at.
Does it come in frame only?
I dig it!
Will there be a vertical pin version?
Is that a new HHA sight light I see?
I love watching hunts but Why would you have a video tutorial describing your product and not show what you’re talking about?
3 pins and 3 pointers on the dial ?
Ok I’m interested
Question do you have to start at 20 yards then 60 yards when you start or can you just go straight to whatever yard you want
Start at 20 ,then slowly work your way back to 60 moving the dial as you go back
Well, I sighted in at 20 with the set up tape at zero. Then got decent groups at 60. This Omnia is fast (307fps) and it put me at sight tape 32. Then, when I shot at 80, I was two feet low. Any ideas why or the remedy? I replaced it with sight tape 34 but haven't had a chance to test it out yet. But, I can tell you that on sight tape 32, I had to put it on nearly 88 yards to get 80. So confused.
Thanks , this made absolutely no sense!
So if a guy wants the most yardage possible, would he use the bottom pin as the floater/mover?
Why does the knob turn a full line mark without any pin movement ?Do something for me . Make sure the dial set screw is nice and tight and turn the dial and watch the sight pin . You can turn the dial a little bet either up or down without the pin moving at all . This is so annoying when setting the distance and trying to get back to the same spot every time . It seems to me that there is space between the gearing that is allowing this free play space . Why can't they make it so the slightest movement will move the pin ? The free play of the dial moving without the pin moving sucks for what they are charging for this sight . Its not just a one off thing . Its on every one I tried and I tried at lest 5 of them .
This is a terrible attachment. I can’t put my quiver on without hitting the sight dial or the windage adjustment. I had to cut pieces of arrows to replace those extenders, and now my quiver sticks way out. I still can’t make distance dial adjustments without taking off the quiver
This is an old video and we now have a new quiver bracket. Please contact our office and we will get you taken care of. Thank you! 800-548-7812
Awful video....can't see a damn thing!
Any chance of getting what the sight’s weight is?🤔 looked at site couldn’t find it.🥺
Nice 👍
HHA are great, just wish they were lighter
And cheaper.
@@upstreamer1661 You get what you pay for Mate!
Great job Jake! Awesome stuff here
Great company, great products! Cant wait to get my hands on a new one!
Great new colors from a great company.
Yes sir! All dovetails come with a mounting puck to mount to the side of the riser!
Will the work on the new bear bows...
Additional note. Sighted in only for the same fletching, arrow weight and point used.
Q: When sighting my Tetra RYZ in, I’m all the down at the bottom of the infinity bar at 20 yards, in order to get my 20 yards top pin to be accurate I need to turn my wheel to about 39 in order for it to hit 20 yards. Is this correct? I can’t figure out any other way to adjust this to make my wheel “0” on the setup tape at 20 yards. I’m shooting a Matthews Drenaline but that shouldn’t matter.