Hay farmer an cattle rancher in Georgia 🇺🇸 I tell it how I see it you get what you see no scripts or skits here real life farming and ranching with the highs an LOWS I’m a dad of 3 an happily married
do you have the clearence specs for all the knives my manual only has it for the plunger slot knife
@lindafrench84409 күн бұрын
After spot spraying with roundup pro concentrate would it be beneficial to burn the dead Johnson grass?
@sendpepperidge651711 күн бұрын
My brother and I took the same baler out to the field for the first time this year... turned on the pto and it snapped a shear bolt on the first rotation.. the short of it is the plunger was striking the knives and bring it to a stop.. only thing we can think of is the rails and bearings are worn out since the plunger is riding low enough to make contact with the bottom triangle shaped blades in the shoot/ tunnel. Being new to this we spent probably 6 hours trying to get the plunger out.. removed all the knives and made up blocks to hold all the spring loaded catches out of the way like you did with the wrenches and this thing is being held up by a few pieces of L shaped metal at the bottom of the shoot past the first set of blades. This has been an absolute nightmare for us so far.. but we didn't remove any bottom shields like you did. I'm about to head back out to the shop and see if that'll make a deference. Thankyou for the video, I know this is 6 years old but if you read this story I wrote and have any advice it would be super appreciated. Have a good day and hopefully a smoother harvest than us!
@sendpepperidge651710 күн бұрын
*update. We got it. Had to remove the plates that have a lip on them (all 3) that are bolted behind stationary triangle blades. And 3 on each side round head bolts further down the tunnel/shoot past those and the plunger came right now. 2 of the bearing wheels fell onto the ground as soon as the plunger cleared the shoot.. definitely our problem. If anyone else is struggling with the plunger removal on a MF1837 I'd be happy to walk you through what we did. Hope yall have a great day and ty again for the video. It definitely made a difference!
@carlosz114able15 күн бұрын
Excellent video, thank you for sharing with us
@PA_Wilds_Coyote24 күн бұрын
Miss your videos
@StoneyGrubb25 күн бұрын
How you time stars
@AmisCorollaАй бұрын
did you say something about war, or that "flu"? Lol. I hope everything is fine, keep farming.
@YusupAbdullaАй бұрын
Ее кушает скот он не вреден?
@theloniousjohnson5205Ай бұрын
Have you ever had any issues with the net Knife not cutting the net?
@conalmcgoey7639Ай бұрын
@BagwellFarms im having issues with the netwrap wrapping around the rubber roller? Do you know why that is happening?
@royaltydiesel6734Ай бұрын
I have a claas variant 380 at my local dealer with 10k bales on it. Supposedly had new belts a year ago but they already have a big section of white on the belts idk if that means they are shot or what. They are asking 19k it’s a 2016 model roto cut, should I run from it or jump on it? My dealer said he gets belts from elsewhere that are $1800 for a set vs claas belts 2k plus each belt. I’m trying to upgrade from a 02 claas rollant 66 .
@danrose3233Ай бұрын
Is there a reason why you use so much foreign equipment. Why not Deere or Vermeer? I am very happy with Vermeer hay equipment. Thanks for the update. I catch your videos now and again. The hay production business can be crazy with little control over prices, unscheduled breakdowns, and uncertain weather. There are good days sprinkled in--that's what me going in this "bad habit".
@aaronbotsford5658Ай бұрын
Im ripping the net off about 10- 20% of my bales intermittently. Any ideas? Seems like its feeding into chamber fine . Bale 20-40 no problem. Then, rip 10 in a row.
@didiercressier8849Ай бұрын
Wow thanks for those videos, really interesting . I broke this chain today on my baler do you think I can bale dry hay tomorrow without this chain ?
@jamesanez1443 ай бұрын
I have the same model. Curious where you got the seal kit?
@darylsanders14573 ай бұрын
Can you please tell me where you bought this? Need one for 2615L. Thanks
@vitowuff3 ай бұрын
Hallo, es gibt eine Trockenguteinrichtung mit einem federbelasteten Rohr, das den Netzeinzug abdichtet, damit kein trockenes brüchiges Heu aus dem Schlitz drückt. ich hatte im Gerstenstroh das selbe Problem.
@vitowuff3 ай бұрын
An der rechten Seite, an der Netzbindung ist ein Hydraulikabsperrhahn der muß in der richtigen Position sein, Das der Arm sich bewegen kann.
@sis92864 ай бұрын
I have a case sisters and need hewith wiring
@sis92864 ай бұрын
Looking for help with firing to my spark plugs new parts
@wuerzelburg4 ай бұрын
What is the objective of castrating the calves?. Is the meat softer? Will the produce more meate?
@allanfranco44644 ай бұрын
DONT CARE ABOUT THE POLITICS MAKE A VIDEO STICK TO THE POINT WASTING TIME ON YOUR PERSONAL OPINION
@davidruiz53834 ай бұрын
amazing work, i thank you for your efforts and the video. And most, you share an honest perspective of the use of Dewalt pole saw. Again thanks and God Bless.
@clem-47-294 ай бұрын
Has anyone fixed a very loud brake on these things? It doesn't have brakes on the hubs but it has an internal brake somewhere down around the secondary clutch. Is there a clutch basket somewhere inside the casing?
@danhammond840619 күн бұрын
Use only john deere hydraulic transmission oil or case hytrans oils in them. They are meant for the wet brake system in the transmission
@clem-47-297 күн бұрын
@@danhammond8406 I am aware of the oil but have you ever changed the brake unit?
@devinholland45274 ай бұрын
How do you get the back to lift and lower
@user-xy3gs3bj2s4 ай бұрын
Thanks Brother That’s what I call need to know info. Your Dealer needs to add an additional line to his dealership. Just selling one brand will bury him. Massey Ferguson ain’t what they used to be.
@delavalmilker4 ай бұрын
If you notice the solenoid piston has a hole drilled through it closest to the threaded end. This allows the insertion of a small punch or nail. To hold the solenoid piston while loosening or tightening down the valve stem, without marring the outside surface of the piston. This is mainly for loosening a stubborn stem from the solenoid piston. When reassembling, it doesn't need to be tightened super tight. Just "hand snug". Tightening it down too hard can damage the rubber diaphragms. When Also watch the direction the replacement rubber diaphragms are installed. One side is labeled "fluid side". Also at 11:48, the actual parts diagram shows the stainless steel washer on the other side of the rubber diaphragm, opposite the nut.
@justinwjmaccurdy4 ай бұрын
Changing my fuel filter on my 383. Having some difficulty finding the turn off for the fuel supply at the tap next to the fuel lift pump. Any advice you can offer? Reading through my maintenance manual and stumped.
@Farmer_Barber5 ай бұрын
What model is that cutter?
@Jsuds-kp3cj5 ай бұрын
Did you get a chance to use the Pequea rake? If so how did it go? Have had a look at the new 2024 H&S ar3210 models? They seem similar and built heavy too. I’m trying to decide between the two. I like the way the Pequea can adjust front and rear for the windrow. I’m thinking the h&s cannot, but not sure.
@amassey77235 ай бұрын
Nice tractor
@user-yo6bx2gn7d5 ай бұрын
Gem of a mower
@kyhart85 ай бұрын
How much hyd oil would leak out if you didnt plug the lines
@alexmitcham48046 ай бұрын
On the dash cluster where you could flip through rpm, mph, & hours there is a temperature gauge selection in the middle. what is that temp gauge reading? Oil, water, turbo?
@mantaskalvaitis6 ай бұрын
Hello, I got c175 2008 - please tell me how to change hidraulic fluid?
@rogerpullin89976 ай бұрын
You might try “Off Road Belts” for a replacement belt at a reasonable price, they can generally match part it you have OEM number
@williamjones36396 ай бұрын
What's wrong with you? Don't you know you are going to be missing all those nice piles of leaves this Fall?😂
@bamagym7 ай бұрын
What was the wire you put down, at the end?
@tomislavobrovac32577 ай бұрын
I just bought this tractor. I just took it for a spin at the dealer to get a feel for it and see what I'm buying. But now looking through the controls, this seems like a machine for someone who never worked a day in a tractor. It's just that simple. I can't wait for spring and summer when the work starts. This is gonna be so much easier to work with then you dad's old IMT 539.
@mark_Hershey7 ай бұрын
Is this about the time the tranny went? Trying to follow your tranny issue as I’m looking at a 4710.
@user-rq3mf8oc9y8 ай бұрын
Where did you get your seed cups at?
@BagwellFarms7 ай бұрын
Look up remlinger and search for there dealers they own the rights to marliss and sell there parts
@oscarscott32328 ай бұрын
😂 the last two minutes is a blast.
@davegenske89738 ай бұрын
Hope things improve for you
@davegenske89738 ай бұрын
Great video. I like the access door idea. How many hours do you have on the tractor and what’s your feeling of it now since you have had it a while
@BagwellFarms8 ай бұрын
2200 hours I like it it give 0 issues till the transmission grenaded can’t really answer what I think honestly till they finally get it fixed 🤦🏼♂️🤷♂️ right now I’d not buy one
@jimcox66878 ай бұрын
Kuhn
@billwhitman15298 ай бұрын
Every now and then you get that piece of equipment that you're better off watching the taillights for the last time. I've got a neighbor who had a tractor whose model number has good reviews and we had a good dealer at the time. But this one tractor was a problem. Clutch after clutch... couldn't get 75 hours before another failure. The company got involved and paid for a lot but he got to the point where he was ready to run it in the pond. He went to another color and said he didn't let the dollars make the decision for him. Point is, every now and again there's that tractor that needs to go. Besides, I hate the composite clutch in those 4710's, lol.
@jacobsmith42158 ай бұрын
Glad you back to making videos really enjoy watching your content
@DennysCountryLife8 ай бұрын
You have a great attitude and you have every right to be pissed. I'm very sorry you're still struggling with this. Not just the 4710, but 2 tractors down.. My goodness. Hang tight bud!
@royaltydiesel67348 ай бұрын
I wish you had a dealer like our local dealer. My great grandpa dealt with his dad and him when he had Masseys on the small farm. I ordered a 4710 from him a couple months ago and even before that he’s always been a stand up guy and helped us with anything. Hell I’ve called him to ask questions about this or that, he’s a stand up gentleman, farm boy and it’s a family owned business so it’s genuine and unique. Sadly that’s long lost in most of the world today.
Пікірлер
Any update on the 4710?
Where did you buy your accumulator?
do you have the clearence specs for all the knives my manual only has it for the plunger slot knife
After spot spraying with roundup pro concentrate would it be beneficial to burn the dead Johnson grass?
My brother and I took the same baler out to the field for the first time this year... turned on the pto and it snapped a shear bolt on the first rotation.. the short of it is the plunger was striking the knives and bring it to a stop.. only thing we can think of is the rails and bearings are worn out since the plunger is riding low enough to make contact with the bottom triangle shaped blades in the shoot/ tunnel. Being new to this we spent probably 6 hours trying to get the plunger out.. removed all the knives and made up blocks to hold all the spring loaded catches out of the way like you did with the wrenches and this thing is being held up by a few pieces of L shaped metal at the bottom of the shoot past the first set of blades. This has been an absolute nightmare for us so far.. but we didn't remove any bottom shields like you did. I'm about to head back out to the shop and see if that'll make a deference. Thankyou for the video, I know this is 6 years old but if you read this story I wrote and have any advice it would be super appreciated. Have a good day and hopefully a smoother harvest than us!
*update. We got it. Had to remove the plates that have a lip on them (all 3) that are bolted behind stationary triangle blades. And 3 on each side round head bolts further down the tunnel/shoot past those and the plunger came right now. 2 of the bearing wheels fell onto the ground as soon as the plunger cleared the shoot.. definitely our problem. If anyone else is struggling with the plunger removal on a MF1837 I'd be happy to walk you through what we did. Hope yall have a great day and ty again for the video. It definitely made a difference!
Excellent video, thank you for sharing with us
Miss your videos
How you time stars
did you say something about war, or that "flu"? Lol. I hope everything is fine, keep farming.
Ее кушает скот он не вреден?
Have you ever had any issues with the net Knife not cutting the net?
@BagwellFarms im having issues with the netwrap wrapping around the rubber roller? Do you know why that is happening?
I have a claas variant 380 at my local dealer with 10k bales on it. Supposedly had new belts a year ago but they already have a big section of white on the belts idk if that means they are shot or what. They are asking 19k it’s a 2016 model roto cut, should I run from it or jump on it? My dealer said he gets belts from elsewhere that are $1800 for a set vs claas belts 2k plus each belt. I’m trying to upgrade from a 02 claas rollant 66 .
Is there a reason why you use so much foreign equipment. Why not Deere or Vermeer? I am very happy with Vermeer hay equipment. Thanks for the update. I catch your videos now and again. The hay production business can be crazy with little control over prices, unscheduled breakdowns, and uncertain weather. There are good days sprinkled in--that's what me going in this "bad habit".
Im ripping the net off about 10- 20% of my bales intermittently. Any ideas? Seems like its feeding into chamber fine . Bale 20-40 no problem. Then, rip 10 in a row.
Wow thanks for those videos, really interesting . I broke this chain today on my baler do you think I can bale dry hay tomorrow without this chain ?
I have the same model. Curious where you got the seal kit?
Can you please tell me where you bought this? Need one for 2615L. Thanks
Hallo, es gibt eine Trockenguteinrichtung mit einem federbelasteten Rohr, das den Netzeinzug abdichtet, damit kein trockenes brüchiges Heu aus dem Schlitz drückt. ich hatte im Gerstenstroh das selbe Problem.
An der rechten Seite, an der Netzbindung ist ein Hydraulikabsperrhahn der muß in der richtigen Position sein, Das der Arm sich bewegen kann.
I have a case sisters and need hewith wiring
Looking for help with firing to my spark plugs new parts
What is the objective of castrating the calves?. Is the meat softer? Will the produce more meate?
DONT CARE ABOUT THE POLITICS MAKE A VIDEO STICK TO THE POINT WASTING TIME ON YOUR PERSONAL OPINION
amazing work, i thank you for your efforts and the video. And most, you share an honest perspective of the use of Dewalt pole saw. Again thanks and God Bless.
Has anyone fixed a very loud brake on these things? It doesn't have brakes on the hubs but it has an internal brake somewhere down around the secondary clutch. Is there a clutch basket somewhere inside the casing?
Use only john deere hydraulic transmission oil or case hytrans oils in them. They are meant for the wet brake system in the transmission
@@danhammond8406 I am aware of the oil but have you ever changed the brake unit?
How do you get the back to lift and lower
Thanks Brother That’s what I call need to know info. Your Dealer needs to add an additional line to his dealership. Just selling one brand will bury him. Massey Ferguson ain’t what they used to be.
If you notice the solenoid piston has a hole drilled through it closest to the threaded end. This allows the insertion of a small punch or nail. To hold the solenoid piston while loosening or tightening down the valve stem, without marring the outside surface of the piston. This is mainly for loosening a stubborn stem from the solenoid piston. When reassembling, it doesn't need to be tightened super tight. Just "hand snug". Tightening it down too hard can damage the rubber diaphragms. When Also watch the direction the replacement rubber diaphragms are installed. One side is labeled "fluid side". Also at 11:48, the actual parts diagram shows the stainless steel washer on the other side of the rubber diaphragm, opposite the nut.
Changing my fuel filter on my 383. Having some difficulty finding the turn off for the fuel supply at the tap next to the fuel lift pump. Any advice you can offer? Reading through my maintenance manual and stumped.
What model is that cutter?
Did you get a chance to use the Pequea rake? If so how did it go? Have had a look at the new 2024 H&S ar3210 models? They seem similar and built heavy too. I’m trying to decide between the two. I like the way the Pequea can adjust front and rear for the windrow. I’m thinking the h&s cannot, but not sure.
Nice tractor
Gem of a mower
How much hyd oil would leak out if you didnt plug the lines
On the dash cluster where you could flip through rpm, mph, & hours there is a temperature gauge selection in the middle. what is that temp gauge reading? Oil, water, turbo?
Hello, I got c175 2008 - please tell me how to change hidraulic fluid?
You might try “Off Road Belts” for a replacement belt at a reasonable price, they can generally match part it you have OEM number
What's wrong with you? Don't you know you are going to be missing all those nice piles of leaves this Fall?😂
What was the wire you put down, at the end?
I just bought this tractor. I just took it for a spin at the dealer to get a feel for it and see what I'm buying. But now looking through the controls, this seems like a machine for someone who never worked a day in a tractor. It's just that simple. I can't wait for spring and summer when the work starts. This is gonna be so much easier to work with then you dad's old IMT 539.
Is this about the time the tranny went? Trying to follow your tranny issue as I’m looking at a 4710.
Where did you get your seed cups at?
Look up remlinger and search for there dealers they own the rights to marliss and sell there parts
😂 the last two minutes is a blast.
Hope things improve for you
Great video. I like the access door idea. How many hours do you have on the tractor and what’s your feeling of it now since you have had it a while
2200 hours I like it it give 0 issues till the transmission grenaded can’t really answer what I think honestly till they finally get it fixed 🤦🏼♂️🤷♂️ right now I’d not buy one
Kuhn
Every now and then you get that piece of equipment that you're better off watching the taillights for the last time. I've got a neighbor who had a tractor whose model number has good reviews and we had a good dealer at the time. But this one tractor was a problem. Clutch after clutch... couldn't get 75 hours before another failure. The company got involved and paid for a lot but he got to the point where he was ready to run it in the pond. He went to another color and said he didn't let the dollars make the decision for him. Point is, every now and again there's that tractor that needs to go. Besides, I hate the composite clutch in those 4710's, lol.
Glad you back to making videos really enjoy watching your content
You have a great attitude and you have every right to be pissed. I'm very sorry you're still struggling with this. Not just the 4710, but 2 tractors down.. My goodness. Hang tight bud!
I wish you had a dealer like our local dealer. My great grandpa dealt with his dad and him when he had Masseys on the small farm. I ordered a 4710 from him a couple months ago and even before that he’s always been a stand up guy and helped us with anything. Hell I’ve called him to ask questions about this or that, he’s a stand up gentleman, farm boy and it’s a family owned business so it’s genuine and unique. Sadly that’s long lost in most of the world today.