Can you use toe plates on a independent front suspension
@stevanrios72120 сағат бұрын
How do the washers go???
@kova2774Күн бұрын
Thank you for making this video
@richardbaier59272 күн бұрын
Perfect. My leak was in the same spot on my 05'... well done.. I love that you are teaching your fam hands on as well. Atta' boy!
@Tundralifted5 күн бұрын
Great video I actually learned a lot from this video
@10cpaul5 күн бұрын
I can guarantee there are hundreds of thousands of RAV4’s on the road that have never had their trans case or a differential fluid changed and they have hundreds of thousands of miles on them. I’ve read if you are towing that you should get it done occasionally.
@JasonTheMunicipalMechanic5 күн бұрын
Only having about half a quart in the transfercase and differential is asking for trouble not changing it. While 30k might not be the maximum mileage you can get from the oil, you want to change it before you hit the maximum because your gonna do damage then. I believe the all wheel drive explorer is similar and they are having problems with them from not changing the oil. The owners manual has the change intervals and 30k is the recommended interval. It’s shorter if you tow. It’s not like there is a bunch of oil in them like older cars used to have. Also the oil was black when I drained it at 30k. It doesn’t effect me anyway what people do with their vehicle but i wouldn’t avoid this maintenance personally.
@Jubagel417 күн бұрын
is it really necessary to use the toyota genuine oil? ITs almost $80 a quart...? anyone have any experience here?
@kevinhines910311 күн бұрын
This is a job coming up on my 04 ram 1500 and I won't remember where all the different screws go. I'll spend more time bagging and tagging screws.
@victorhoyt435214 күн бұрын
Quick question, is it fairly simple to just remove the ecm to have more room to work?
@zaheerabbas831616 күн бұрын
I am working this crusher I need tel me what is bearing no of this crusher
@simonhenhoeffer893418 күн бұрын
Yours is a le awd? Bothe the diff and the transfer case take the same fluid?
@jvm375319 күн бұрын
Jason; I enjoyed this video. I've got a 79 International model 1924 with a Eaton transmission that I'm having an issue with the clutch. I'd love to be able to talk to you and bounce some things around.
@MantisTobogganDoctorofMedicine20 күн бұрын
So awesome to just find a video and not have to try to figure it out by yourself. Thanks
@sts.55621 күн бұрын
do your airbag recall , i got a stop driving note on my door yesterday . it free at dodge dealer or they will come to your house and do it , 2003 models
@JasonTheMunicipalMechanic21 күн бұрын
Was it for the passenger side or drivers side? I had the passenger side done.
@sts.55621 күн бұрын
@@JasonTheMunicipalMechanic drivers , you can google it
@JasonTheMunicipalMechanic21 күн бұрын
Thank you. I checked the vin on mopar last night and I didn’t have any open recalls. I’ll keep an eye out for one.
@paul9110323 күн бұрын
Used your system on my 2018 F250 for P/S flush. Worked GREAT!! Saved me a lot of mess and time. I used a vacuum oil extractor in the plugged return line and sucked all the reservoir fluid out. Refilled with fresh Mercon LV and followed your lead. Thanks for making this video.
@ryanwindsor188423 күн бұрын
I thought I was just dumb getting the torch out but I guess thats standard on these new deere designs huh? I think i'll spend a little extra time and cut the shanks off and weld some Cat ones on there.
@JasonTheMunicipalMechanic23 күн бұрын
I have changed these again after this and they came right out. I was really surprised. I don’t know if I got lucky or if was all the never seize.
@ryanwindsor188420 күн бұрын
@@JasonTheMunicipalMechanic I fought for 2 hours and an employee fought for another 4 hours to get 3 of 5 teeth off. We then loaded it up and took it to have the shanks replaced with normal backhoe pins. I can't be dropping $1,000 in labor every time we have to change teeth lol. Terrible design
@davidchaput509724 күн бұрын
Great I'm starting on mine tomorrow good video where did that o ring laying on the floor come from
@GRDDAN125 күн бұрын
Hi, what oil can I use for my compactor. I see a lot of black smoke and wondering maybe cuz low on oil. Please help
@hobbylighthouse37526 күн бұрын
Thanx for the tip! Was a Great Help to me!
@coryblische29 күн бұрын
So it's been 4 years, how's this brilliant fix holding up? Good, I hope! I'm about to copy this on my '14 Chevy "Mouse Hotel" Silverado. Thanks for sharing!
@JasonTheMunicipalMechanic29 күн бұрын
I haven’t had any mice inside since I did this.
@TheOldKid29 күн бұрын
I just did one today. Siezed up more than ive seen. One was so bad I has to blow a hole through it and carefully wash it out with a torch. No shade, high 90's and high humidity added to the fun
@JasonTheMunicipalMechanic29 күн бұрын
Fun times. Thank the lord for the torch set.
@andrewstratton806Ай бұрын
Do they not let you film videos in the town garage anymore?
@arsenakopian4478Ай бұрын
i hate nissan maxima cars i hate where they put this stuff so hard to get even power stearing hard on this cars dificult
@knight3131Ай бұрын
Was the one can that you purchase enough for both the transfer case and rear differential or you needed to purchase more? how much does it come in container ? I have a 2020 Rav4 XLE at 23k miles and I'm looking into doing this myself sometimes next year.
@JasonTheMunicipalMechanicАй бұрын
The one can was enough for both. There is a liter in the can I believe.
@chrisrhoads8256Ай бұрын
Sir my x720 drive staft rear the someone before I had this and I bought it used and the rear drive shaft Greaser you can't get to it but somebody put it in there wrong I can't grease it videos of great😊
@joaobatistatapia8891Ай бұрын
Muito bom o vídeo de explicação do interruptor de luz da porta vou fazer na minha f 250 nota mil p vc 🙏 Brasil-SP.
@BewHew.Ай бұрын
If i want to just change the color from amber to like a white, can i just unscrew the top part and change the bulb or do i have to do it how you did it?
@JasonTheMunicipalMechanicАй бұрын
I don’t believe the top comes off
@BewHew.Ай бұрын
@@JasonTheMunicipalMechanic Ok, thank you for your help.
@tyriek4Ай бұрын
Where’s the purge video haha
@JasonTheMunicipalMechanicАй бұрын
Ford super duty purging power steering system and making an adapter kzread.info/dash/bejne/dI6epZZxlNzFec4.html
@Truth_TellaАй бұрын
What does that small port between the intake and exhaust ports go to? I ordered a new dryer that doesn't have threads for that port so I'm not able to hook it up.
@JasonTheMunicipalMechanicАй бұрын
I don’t remember off the top of my head. I think it went to the governor.
@Truth_TellaАй бұрын
@@JasonTheMunicipalMechanic would that line not being hooked up cause constant purging from the dryer? I'm getting a purge every 45 secs.
@LiltoivolaАй бұрын
You are the Man! What a hassle getting to it, my starters dead and they want $500. to replace!❤
@DigitalChadLifeАй бұрын
Big thanks!
@sweetlou5902Ай бұрын
I have to do my 05, after seeing this I may pay someone, I'll lose my shit doing this job ha ha respect man!
@zeenycobbАй бұрын
Thanks!!!
@JimmyHintonАй бұрын
I have 32 inch tires on my Jeep YJ. It has no problem pulling 5th gear. Mine also has a 4 cylinder in it. If you have a problem pulling 5th gear it maybe your transmission, not the tires.
@JasonTheMunicipalMechanicАй бұрын
It had 35 inch tires on it. It was better with the smaller tires.
@raesevers7373Ай бұрын
Is this with all year models?
@michalemontoya8480Ай бұрын
What dose your compressor look like
@JasonTheMunicipalMechanicАй бұрын
It is a 60 gallon husky compressor from Home Depot.
@jimdrechsel3611Ай бұрын
This really saved me a lot of money I don’t have doing it myself. I followed your steps and success! I did buy a Ford hydro boost. It comes with the rod setup for the master cylinder. Only thing I had to get in addition was the O Rings - 2. Thank you. Thank you. Thank you for sharing!
@JasonTheMunicipalMechanicАй бұрын
Glad I could help.
@jeffreyMagnum460Ай бұрын
That part number says it doesn't fit 06
@JasonTheMunicipalMechanicАй бұрын
This vehicle is an 06 and all parts shown were installed on this vehicle. I’m not sure which part number your referring to.
@danielmoore8538Ай бұрын
Thanks,been looking at one of these for my 2010 Silverado
@JasonTheMunicipalMechanicАй бұрын
It’s not a bad receiver. My only real complaint it the brightness at night and the dimming feature.
@jerryfitzpatrick3667Ай бұрын
Interesting, thanks for posting and sharing.
@JasonTheMunicipalMechanicАй бұрын
Thank you for watching.
@patrickhathaway6178Ай бұрын
Glad to see you. Enjoy your video.
@JasonTheMunicipalMechanicАй бұрын
It’s been awhile.
@floydrturbo1Ай бұрын
Well done sir.
@JasonTheMunicipalMechanicАй бұрын
Thank you
@josephnozile1267Ай бұрын
I was looking for you link I don't see it
@stevenlee9705Ай бұрын
So when this happened did you lose the lights in the switches as well? Mine just quit working this morning but I could got them to roll down with the key fob. Big mistake since i was 3 hours from home and had to drive the whole way with them down.
@JasonTheMunicipalMechanicАй бұрын
I just had the problem with the windows and door locks. Both were corroded splices in the same area.
@Tman317Ай бұрын
Never thought of Tractor Supply having blast media, but my store indeed does, thanks! Now...where did you get that screen/ sifter from? Can't find it, bit neednthat bad. Thanks!
@JasonTheMunicipalMechanicАй бұрын
This is the media screen. a.co/d/fH0e4Cu
@user-vc6in3ze3nАй бұрын
Tinting one right now. this helped find out how to get the glass out and broken down. Thanks!
@j.santosh.l.6386Ай бұрын
An lx885 new holland how to rise lift arms with engine off to replace starter.
@user-pq5oq1ui7uАй бұрын
Superb video, it shows that there are a few aspects of this job that will cause a slow down in the parts removal, torsion bar removal from the lower control arm being the biggest issue. "Thanks for you time"
@timberhitchllcАй бұрын
Excellent work! Saved time and money chasing the same problem in my truck. Thanks for making the time and effort to document and share this content!
@nandez5090Ай бұрын
Thanks for the vid, it helped a lot! I didn’t pull the dash all the way out I was just replacing the top. Was able to pull it off about 4/5 inches and I was able to get to the screws underneath the topper holding onto the defrost vents. 👍 Dropping the steering column gave me anxiety tho 😂
Пікірлер
Can you use toe plates on a independent front suspension
How do the washers go???
Thank you for making this video
Perfect. My leak was in the same spot on my 05'... well done.. I love that you are teaching your fam hands on as well. Atta' boy!
Great video I actually learned a lot from this video
I can guarantee there are hundreds of thousands of RAV4’s on the road that have never had their trans case or a differential fluid changed and they have hundreds of thousands of miles on them. I’ve read if you are towing that you should get it done occasionally.
Only having about half a quart in the transfercase and differential is asking for trouble not changing it. While 30k might not be the maximum mileage you can get from the oil, you want to change it before you hit the maximum because your gonna do damage then. I believe the all wheel drive explorer is similar and they are having problems with them from not changing the oil. The owners manual has the change intervals and 30k is the recommended interval. It’s shorter if you tow. It’s not like there is a bunch of oil in them like older cars used to have. Also the oil was black when I drained it at 30k. It doesn’t effect me anyway what people do with their vehicle but i wouldn’t avoid this maintenance personally.
is it really necessary to use the toyota genuine oil? ITs almost $80 a quart...? anyone have any experience here?
This is a job coming up on my 04 ram 1500 and I won't remember where all the different screws go. I'll spend more time bagging and tagging screws.
Quick question, is it fairly simple to just remove the ecm to have more room to work?
I am working this crusher I need tel me what is bearing no of this crusher
Yours is a le awd? Bothe the diff and the transfer case take the same fluid?
Jason; I enjoyed this video. I've got a 79 International model 1924 with a Eaton transmission that I'm having an issue with the clutch. I'd love to be able to talk to you and bounce some things around.
So awesome to just find a video and not have to try to figure it out by yourself. Thanks
do your airbag recall , i got a stop driving note on my door yesterday . it free at dodge dealer or they will come to your house and do it , 2003 models
Was it for the passenger side or drivers side? I had the passenger side done.
@@JasonTheMunicipalMechanic drivers , you can google it
Thank you. I checked the vin on mopar last night and I didn’t have any open recalls. I’ll keep an eye out for one.
Used your system on my 2018 F250 for P/S flush. Worked GREAT!! Saved me a lot of mess and time. I used a vacuum oil extractor in the plugged return line and sucked all the reservoir fluid out. Refilled with fresh Mercon LV and followed your lead. Thanks for making this video.
I thought I was just dumb getting the torch out but I guess thats standard on these new deere designs huh? I think i'll spend a little extra time and cut the shanks off and weld some Cat ones on there.
I have changed these again after this and they came right out. I was really surprised. I don’t know if I got lucky or if was all the never seize.
@@JasonTheMunicipalMechanic I fought for 2 hours and an employee fought for another 4 hours to get 3 of 5 teeth off. We then loaded it up and took it to have the shanks replaced with normal backhoe pins. I can't be dropping $1,000 in labor every time we have to change teeth lol. Terrible design
Great I'm starting on mine tomorrow good video where did that o ring laying on the floor come from
Hi, what oil can I use for my compactor. I see a lot of black smoke and wondering maybe cuz low on oil. Please help
Thanx for the tip! Was a Great Help to me!
So it's been 4 years, how's this brilliant fix holding up? Good, I hope! I'm about to copy this on my '14 Chevy "Mouse Hotel" Silverado. Thanks for sharing!
I haven’t had any mice inside since I did this.
I just did one today. Siezed up more than ive seen. One was so bad I has to blow a hole through it and carefully wash it out with a torch. No shade, high 90's and high humidity added to the fun
Fun times. Thank the lord for the torch set.
Do they not let you film videos in the town garage anymore?
i hate nissan maxima cars i hate where they put this stuff so hard to get even power stearing hard on this cars dificult
Was the one can that you purchase enough for both the transfer case and rear differential or you needed to purchase more? how much does it come in container ? I have a 2020 Rav4 XLE at 23k miles and I'm looking into doing this myself sometimes next year.
The one can was enough for both. There is a liter in the can I believe.
Sir my x720 drive staft rear the someone before I had this and I bought it used and the rear drive shaft Greaser you can't get to it but somebody put it in there wrong I can't grease it videos of great😊
Muito bom o vídeo de explicação do interruptor de luz da porta vou fazer na minha f 250 nota mil p vc 🙏 Brasil-SP.
If i want to just change the color from amber to like a white, can i just unscrew the top part and change the bulb or do i have to do it how you did it?
I don’t believe the top comes off
@@JasonTheMunicipalMechanic Ok, thank you for your help.
Where’s the purge video haha
Ford super duty purging power steering system and making an adapter kzread.info/dash/bejne/dI6epZZxlNzFec4.html
What does that small port between the intake and exhaust ports go to? I ordered a new dryer that doesn't have threads for that port so I'm not able to hook it up.
I don’t remember off the top of my head. I think it went to the governor.
@@JasonTheMunicipalMechanic would that line not being hooked up cause constant purging from the dryer? I'm getting a purge every 45 secs.
You are the Man! What a hassle getting to it, my starters dead and they want $500. to replace!❤
Big thanks!
I have to do my 05, after seeing this I may pay someone, I'll lose my shit doing this job ha ha respect man!
Thanks!!!
I have 32 inch tires on my Jeep YJ. It has no problem pulling 5th gear. Mine also has a 4 cylinder in it. If you have a problem pulling 5th gear it maybe your transmission, not the tires.
It had 35 inch tires on it. It was better with the smaller tires.
Is this with all year models?
What dose your compressor look like
It is a 60 gallon husky compressor from Home Depot.
This really saved me a lot of money I don’t have doing it myself. I followed your steps and success! I did buy a Ford hydro boost. It comes with the rod setup for the master cylinder. Only thing I had to get in addition was the O Rings - 2. Thank you. Thank you. Thank you for sharing!
Glad I could help.
That part number says it doesn't fit 06
This vehicle is an 06 and all parts shown were installed on this vehicle. I’m not sure which part number your referring to.
Thanks,been looking at one of these for my 2010 Silverado
It’s not a bad receiver. My only real complaint it the brightness at night and the dimming feature.
Interesting, thanks for posting and sharing.
Thank you for watching.
Glad to see you. Enjoy your video.
It’s been awhile.
Well done sir.
Thank you
I was looking for you link I don't see it
So when this happened did you lose the lights in the switches as well? Mine just quit working this morning but I could got them to roll down with the key fob. Big mistake since i was 3 hours from home and had to drive the whole way with them down.
I just had the problem with the windows and door locks. Both were corroded splices in the same area.
Never thought of Tractor Supply having blast media, but my store indeed does, thanks! Now...where did you get that screen/ sifter from? Can't find it, bit neednthat bad. Thanks!
This is the media screen. a.co/d/fH0e4Cu
Tinting one right now. this helped find out how to get the glass out and broken down. Thanks!
An lx885 new holland how to rise lift arms with engine off to replace starter.
Superb video, it shows that there are a few aspects of this job that will cause a slow down in the parts removal, torsion bar removal from the lower control arm being the biggest issue. "Thanks for you time"
Excellent work! Saved time and money chasing the same problem in my truck. Thanks for making the time and effort to document and share this content!
Thanks for the vid, it helped a lot! I didn’t pull the dash all the way out I was just replacing the top. Was able to pull it off about 4/5 inches and I was able to get to the screws underneath the topper holding onto the defrost vents. 👍 Dropping the steering column gave me anxiety tho 😂