Пікірлер

• 
  @stevioclarkАй бұрын

  Beeswax is yellow and will add that color to almost any wood. Mineral oil alone will add a deep wet look without the yellowing. Both of your finishes look very nice.

• 
  @blackcoalwoodworkingАй бұрын

  Thank you

• 
  @AlejandroRodriguez-tn1drАй бұрын

  Butterfly nut!

• 
  @DaveCollierCampingАй бұрын

  Excellent work

• 
  @blackcoalwoodworkingАй бұрын

  @@DaveCollierCamping thanks!

• 
  @SwampFox-tl2viАй бұрын

  $10 is a vase, $100 is a vaas

• 
  @blackcoalwoodworkingАй бұрын

  Ha! Sounds good to me

• 
  @gsilcofulАй бұрын

  Cool.

• 
  @blackcoalwoodworkingАй бұрын

  Thank you

• 
  @corniemartens9189Ай бұрын

  Looks good

• 
  @blackcoalwoodworkingАй бұрын

  Thanks!

• 
  @gsilcoful2 ай бұрын

  Wonderful.

• 
  @blackcoalwoodworking2 ай бұрын

  Thank you

• 
  @gsilcoful2 ай бұрын

  Cool.

• 
  @blackcoalwoodworking2 ай бұрын

  Thanks

• 
  @gsilcoful2 ай бұрын

  Thank you, Very nice.

• 
  @blackcoalwoodworking2 ай бұрын

  Thank you!

• 
  @TurningStitches2 ай бұрын

  Love the bowl. Beautiful colors!

• 
  @blackcoalwoodworking2 ай бұрын

  Thanks!

• 
  @margemartens7022 ай бұрын

  Love the colours on the bowl

• 
  @blackcoalwoodworking2 ай бұрын

  Thanks!

• 
  @gsilcoful2 ай бұрын

  Beautiful.

• 
  @blackcoalwoodworking2 ай бұрын

  Thank you!

• 
  @georgevivianschellenberg99772 ай бұрын

  Another beautiful bowl Matt

• 
  @blackcoalwoodworking2 ай бұрын

  Thank you!

• 
  @MASI_forging2 ай бұрын

  It's a masterpiece 👏👏

• 
  @blackcoalwoodworking2 ай бұрын

  Thank you!

• 
  @gsilcoful2 ай бұрын

  Nice.

• 
  @blackcoalwoodworking2 ай бұрын

  Thanks

• 
  @gsilcoful2 ай бұрын

  Thank you.

• 
  @blackcoalwoodworking2 ай бұрын

  👍🏻

• 
  @robertskelton25763 ай бұрын

  My favorite wood, spalted and buggy. Nothing like turning and getting splattered with bug guts.

• 
  @blackcoalwoodworking3 ай бұрын

  🤣

• 
  @FullSpinWoodwork3 ай бұрын

  Good job, that turned out great.

• 
  @blackcoalwoodworking3 ай бұрын

  Thanks!

• 
  @anthonygreen96094 ай бұрын

  This is the joy of wood turning. Great job and love your channel.

• 
  @blackcoalwoodworking4 ай бұрын

  Thank you! I'm having a blast. Apparently woodturning is addictive 🤣

• 
  @martywilliams2794 ай бұрын

  Hi Matt if you want to use the skew better have a look at a fellow youtuber he goes by the name Woodturner 21 he is a skew master here is the link kzread.info/dash/bejne/hqCD3MGfqbi6mLQ.htmlsi=Hy-38X7YIwbou1U_ watch this and improve your skew work I surely did Keep up the great work Marty Aussie turner

• 
  @JohnWII4 ай бұрын

  Clean looking vase! How do you handle including the pith, some slow dry process? Everything I've turned so far that included the pith has split (some within days, some months). Also not trying to judge but could be worth doing some googling on using gloves and lathes. Fingerless could be a good option or if you're just trying to stay clean/warm then nitrile or something that would just tear instead of pulling you into the machine would keep your hands safer!

• 
  @blackcoalwoodworking4 ай бұрын

  Thanks! The wood has been drying for years and would have cracked by now if it was going to. I also still my hole right through the pitch so I think that helps somewhat. The gloves thing, it's winter when the video was filmed. I've got some tighter gloves now but our winter temps hit -40 C/F but probably average out at -10C this year. Having gloves with fingers poking out is asking for frostbite in minutes here. Safety is everyone's responsibility for sure and I appreciate your concern

• 
  @johnh54634 ай бұрын

  Looks great! Same here trying patiently to get better with the skew

• 
  @blackcoalwoodworking4 ай бұрын

  I wish you well with your skew!

• 
  @margemartens7025 ай бұрын

  WOW that is beautiful looking wood

• 
  @blackcoalwoodworking5 ай бұрын

  Thank you!

• 
  @woodfather5 ай бұрын

  That's a super cute little lathe project, great idea. And cheers for explaining why you have those gloves on - no business of mine if someone wants to wear gloves when they work, but thats the first time I've seen someone wear those super thick insulated ones, must be bloody cold up there!! 👍👍

• 
  @blackcoalwoodworking5 ай бұрын

  Thanks! And yeah, it gets down to -40. It's been a mild winter bit I still like to feel my fingers. It's still winter but warming up now thankfully.

• 
  @gsmscrazycanuck98145 ай бұрын

  First time I saw one like that. Do you sell them?

• 
  @blackcoalwoodworking5 ай бұрын

  Yes I do, they sell fairly well

• 
  @gsmscrazycanuck98145 ай бұрын

  @@blackcoalwoodworkinggood to know.

• 
  @gsmscrazycanuck98145 ай бұрын

  Great video. I am a former Canadian :)

• 
  @blackcoalwoodworking5 ай бұрын

  Thanks! Being a former Canadian I'm sure you want through your share of mixing Imperial and metric measurements depending on mood and all sorts of other seemingly randomness 😜. It's good to see you on my channel

• 
  @gsmscrazycanuck98145 ай бұрын

  @@blackcoalwoodworking yes, especially with temperature. 0C to -40 and 33F and above...lol. Miles to a destination and Km to see how long it will take...lol

• 
  @tableshaper40765 ай бұрын

  How much is accoya? I can't find any prices online for lumber. Other than even Accoya saying it's "luxury".

• 
  @blackcoalwoodworking5 ай бұрын

  Good question. I happened to find some scraps at a local factory that specializes in high luxury stuff and bought it. There wasn't a lot to buy, but enough to test a couple of bowls at least

• 
  @margemartens7025 ай бұрын

  That looks nice

• 
  @blackcoalwoodworking5 ай бұрын

  Thank you!

• 
  @corniemartens91895 ай бұрын

  I love the different colours in the S looks amazing.

• 
  @blackcoalwoodworking5 ай бұрын

  Thank you!

• 
  @margemartens7025 ай бұрын

  WOW. I love how that wood pops

• 
  @blackcoalwoodworking5 ай бұрын

  Thanks!

• 
  @markfirearms89225 ай бұрын

  A good wood is Camphor which smells like Vicks vapor rub an the trunck wood is a different color then the limbs.

• 
  @blackcoalwoodworking5 ай бұрын

  That's cool

• 
  @WhoGnu085 ай бұрын

  A very nice-looking bowl. I had never heard of Accoya before, very interesting. I imagine you wore a dust mask or respirator the whole time. I will be looking for your update the longevity of the smell and the durability of the bowl. Did you buy the wood online? Any side of effects of working with it, e.g., staining of the lathe, etc?

• 
  @blackcoalwoodworking5 ай бұрын

  Thanks! Yeah, respirator is my preferred safety device. The only side effect was the smell. Even a day later the shavings on the ground kept the smell in the air. Other than that it was similar to turning pine, no staining or anything, it did seem to cut a little harder but otherwise it's just like pine. I sourced it from my workplace.

• 
  @martins44636 ай бұрын

  I'm going to make one of those...thanks for sharing

• 
  @blackcoalwoodworking6 ай бұрын

  Enjoy, thanks!

• 
  @schechnera6 ай бұрын

  Looks very cool. Careful with those HF gloves. I confess to wearing that exact glove on my left hand sometimes when I turn, even though I know it isn’t the safest thing to do. But those shavings get so hot.

• 
  @blackcoalwoodworking6 ай бұрын

  Thanks! Yeah, the gloves are a necessary evil. I'm always watchful and have made some hard and fast rules for myself so I stay as safe as possible by habit among other things.

• 
  @aleeshafreeman83806 ай бұрын

  Promo-SM

• 
  @michaelogden59586 ай бұрын

  7:40 or so... I was going to ask how you could stand those shavings hitting the outside of your hand. I know that I can take it for only a few seconds. I nearly always wear a pair of "Ironclad Framer" gloves for just that reason. I know the Safety Sallies clutch their pearls when they associate lathes and gloves, but hey. Nicely done video and box. A pleasure to watch, listen to, and learn! Cheers!

• 
  @blackcoalwoodworking6 ай бұрын

  Thanks! Ya, the safety stuff, super important of course. Most of the time I do wear gloves too. I must have been feeling particularly invulnerable that day.

• 
  @adammcnally37216 ай бұрын

  Freddy kruger gloves are a bad idea on a lathe. No feel, plenty of fabric to rip your fingers off through.

• 
  @blackcoalwoodworking6 ай бұрын

  I appreciate your concern. Wearing gloves on the lathe is normal, sometimes even Freddie Kruger's. It's best to keep all fingers behind the tool rest while the wood is spinning. Much safer. Cheers!

• 
  @rawbacon6 ай бұрын

  The grain runs the same way on each layer of LVL

• 
  @blackcoalwoodworking6 ай бұрын

  Thanks, I really didn't know which way the layers ran, I just know it felt a more difficult to cut than what I would have thought to be normal

• 
  @corniemartens91896 ай бұрын

  Looks really good

• 
  @blackcoalwoodworking6 ай бұрын

  Thanks!

• 
  @johnbauby66127 ай бұрын

  I have been using walnut oil for a long time. Haven't seen many others doing so. There are so many useless vids out there on different, unnecessary products when all you need is to keep it simple. Natural oils and natural wax.

• 
  @blackcoalwoodworking7 ай бұрын

  Agreed! Simple is good

• 
  @corniemartens91897 ай бұрын

  Very well done

• 
  @blackcoalwoodworking7 ай бұрын

  Thanks!

• 
  @jackdaniels21277 ай бұрын

  Hi bro, what smell do you get from the lindseed mix? What mineral oil did you use? Baby oil?

• 
  @blackcoalwoodworking7 ай бұрын

  Hi! Boiled linseed oil has a distinct "oil" smell. If you attempt to use it inside a drawer, you'll find the smell stays for a long time because it's not allowed to cure and off gas properly. Once boiled linseed oil has cured there is little to no smell. The mineral oil was the basic stuff from the local drug store, not baby oil. Sometimes there's a price difference going to the baby mineral oil vs a generic mineral oil. For woodworking, they are the same, you may just end up paying more for one.

• 
  @jackdaniels21277 ай бұрын

  @@blackcoalwoodworking the color of Your box is fantastic, am thinking of olive oil or some other household oil that would give pine a darker tint.

• 
  @blackcoalwoodworking7 ай бұрын

  Thanks! The reason I don't use olive oil is because I think it will go rancid at some point. If you are using a wood bowl regularly then I think olive oil is ok because you would wash the bowl and the old oil off, then add new oil back on

• 
  @thealchemist90257 ай бұрын

  Really surprised you are wearing gloves. That seems really dangerous around a spinning machine.

• 
  @E-Glide7 ай бұрын

  Pretty much standard practice for experienced turners

• 
  @blackcoalwoodworking7 ай бұрын

  Thanks for being concerned! It's normal especially in Canada's winter... Or the hot steam coming off the wood in summer... The key to being safe is to keep your hands behind the tool rest.

• 
  @76spinoza7 ай бұрын

  Love your vids. Just started turning myself. Blew up my first bowl but my second was successful.

• 
  @blackcoalwoodworking7 ай бұрын

  Thanks, I'll bet that successful one felt great!

• 
  @davidharrington72547 ай бұрын

  Nice little bowl. I like the rim detail on the outside. What make/model chuck is that? Have you been happy with it?

• 
  @blackcoalwoodworking7 ай бұрын

  Thanks! The Chuck I have is the VINWOX SCK4-3.75 Wood Lathe Gear Chuck Key Chuck, with 1"x8TPI Thread & 3/4"x16TPI Adapter. I actually live it a lot. I did get to a point where it wouldn't tighten anymore, but the fix was super easy... I cleaned out the saw dust by rinsing it out, then put vegetable oil in it, now it's like new again!

• 
  @timponder74877 ай бұрын

  Simple but pretty

• 
  @blackcoalwoodworking7 ай бұрын

  Thanks

• 
  @grantwriter77778 ай бұрын

  Would you kindly make a different one? Most designs stand on a wobbly tripod, that takes up too much space anyway. Most working Artists are in limited space. Why not build one that clamps to any table securely, while the top canvas grabber goes to a 4' height, and THE BOTTOM CANVAS GRABBER, lowers below the table height, to about 2' off the ground. That gives a professional 6 foot canvas in a secure and limited space. I went to Home Depot, but they didn't seem to have a clamp that is secure on the easel, but clamps to any table (and can be moved when necessary.) You could certainly sell the design if you don't want to make and sell the Easels! Also, don't we all hate wingnuts? They're too small. We need a big knob, easier to grab and turn. HD calls them "Valves" but they're much easier to grab and adjust. The "Table top Easels" tip over and hold a max 1 ft canvas. Could you do it?

• 
  @blackcoalwoodworking7 ай бұрын

  Thanks for the idea! we will see if I get some time to try that.

• 
  @666toysoldier10 ай бұрын

  Before WWII the Finns used a similar recipe for gunstock finish: 1/3 beeswax, 1/3 linseed oil, 1/3 turpentine. I have used it o a number of tool handles and walking sticks.

• 
  @blackcoalwoodworking10 ай бұрын

  That's interesting!

• 
  @margemartens702 Жыл бұрын

  I like it

• 
  @blackcoalwoodworking Жыл бұрын

  Thank you

• 
  @jolenemartensart Жыл бұрын

  Such a unique looking bowl! ❤

• 
  @blackcoalwoodworking Жыл бұрын

  Thanks!