Пікірлер

• 
  @cathymaeduero529823 күн бұрын

  this has more features than the bishop pen, plan to buy this soon puhon

• 
  @djs9315Ай бұрын

  Sorry to hear youve not been well.. prayers up to the most high on your behalf.. god bless and keep moving fwd.. great review

• 
  @CarlSnowdenartАй бұрын

  I saw you comment on adam darklords page about the m settings only adjusting the motor speed? Doesnt the hz always stay the same and the torque is adjusted through the m modes? Thanks!

• 
  @tattootheoryАй бұрын

  It’s all a gimmick. If you actually talk with a faulhaber motor engineer like I have you will know that all these motors do is slow down.

• 
  @CarlSnowdenartАй бұрын

  I thought something was fishy with this machine right off the bat when they were claiming m0 was direct drive and m+1 and +2 increased the torque. That's completely false. Seems that the people who are blindly praising this machine do it for acus's benefit. What a let down

• 
  @randysnewbiebluesrockguita7782Ай бұрын

  I just got a full set of Industry Ink. I've heard nothing but good things about it . I've yet to use it so far but I have seen other tattoos that look amazing with this INK . I also got a bottle of the red UV ink so I can make eyes light up in my tattoo's. I'm just getting back into tattooing after 25 years of not doing any. The Technology has really gone way above what we used to have. I'm really looking foreword to tattooing again but it's gonna be a while as I am getting my sea legs back. I finally got all of my supplies and machines and I went with Pen machines instead of coil this time around, but I still have a few coils laying around in case I need them. I'm really hoping this ink is as good as it's being pushed as. If it is going to glide into the skin like said then it should be great.

• 
  @DanielHarris42024Ай бұрын

  Their grips suck to wrap, that nose taper just wants to shift during work. I got a Discover adjustable (wired) and while it's similar to the thorn 2, it has a fat grip that fully fixes this issue. That blue one looks nice tho.

• 
  @DanielHarris42024Ай бұрын

  and brushless is proving to be less worthy than anticipated. FK is going back to coreless on some new models I understand.

• 
  @AndrewHohnАй бұрын

  Do you recommend it? I’m also looking at the cnc q2 short

• 
  @tattootheoryАй бұрын

  These already are old generation machines. If you are a beginner I recommend any newer style wireless pen machine from Cnc or DragonHawk, also mummy is very good.

• 
  @AndrewHohnАй бұрын

  @@tattootheorythanks yes I see the new ones don’t have a German motor idk if that’s a deal breaker but the new cnc q2 looks the same idk

• 
  @LeroyMustang2 ай бұрын

  I wonder what mechanism they’re going to use for the adjustable drive. I’ve heard the swashplate isn’t the best for that. If you look at the Valhalla and the Unio they’re very long and I assume no swashplate but that causes a battery not to fit well obviously. Hmmmmm

• 
  @tattootheory2 ай бұрын

  It's definitely a different system because it has egive and boost mode

• 
  @Ffs009112 ай бұрын

  my solice pro is crying.

• 
  @vapestar37052 ай бұрын

  Thanks for showing this man.that red one looks pretty dope!for that price it's not bad at all!everything it dose and includes really can't be best especially at this time.like u said it's a one of a kind as of right now..this company always dose it right and when I say stigma I mean this company not to be confused with the other bootleg company.as always man great show n tell on this machine

• 
  @tattootheory2 ай бұрын

  Thank you bro. I appreciate it. I'm excited to test this machine out.

• 
  @NothingNowhereNoOne2 ай бұрын

  I got the Cheyenne sol nova 4.5 to do it all. It does not. Lining is weak with it. And whenever I try to turn power supply past 12.5 , the machine just shuts off. Is that normal???

• 
  @tattootheory2 ай бұрын

  What cartridges are you using? And the machine will not go past 12.5 the motor is a 12 volt motor dude. Everyone assumes that a longer stroke is gonna be better for lining while I'm over here dropping lines with a 14 round shader with that exact machine in a 2.5. The longer stroke revolution on any machine will need more power it will run slower because there is more travel distance for the motors rotational force. This situation forces you to to crank the machine up and go slower and that machine is not good for everything in my opinion.

• 
  @Max-dm3vg2 ай бұрын

  What machine is better for lining between this and the nuema range...???

• 
  @tattootheory2 ай бұрын

  Neuma 5 flex would be my all around pick for lining.

• 
  @tiktok-rv5gg2 ай бұрын

  real talk. i thought this will be the replacement of heavy coil machine. i bought mp5 last month. i want to sell it now. unlike other tattoo machine. rotary direct drive rotary stikes force from center to outer, full force up and down with consistent power. coil machine is the electromagnetic full force downward from armature bar that electromagnetized to coil copper wire. this full magnetic drive very crazy idea 5 magnet. pushing same pole. 2 magnet on top and 2 on bottom and one magnet in the center. the force coming from side to center. imagine two strong upper and lower magnet pushing the force towards center instead from center towards outer. weirdest and strangest tattoo machine ever.

• 
  @tattootheory2 ай бұрын

  Bro this machine is amazing, but it only works great with cartridges that have a soft membrane. If the membrane is stiff the magnets will have a short stroke.

• 
  @loyaltyfamily44502 ай бұрын

  What do you think of mom's tattoo ink

• 
  @tattootheory2 ай бұрын

  I haven't used Mom's since the 90s, Mom's is made by technical tattoo supply which Lou Rubino used to own and then left and started world famous ink, and ultimate tattoo supply. These days I only know a handful of artists that use Mom's because there are much better inks on the market now. We do although have very little time left before the fda steps in and starts regulating our ink, I'd recommend loading up on all the ink you can get, I see allot of problems about to start in tattooing.

• 
  @loyaltyfamily44502 ай бұрын

  @tattootheory is mom's ink still good to use or is dynamic a good ink too I'm just starting out and I'm basically learning as I go

• 
  @tattootheory2 ай бұрын

  @loyaltyfamily4450 it's fine to practice with on synthetic skin. Dynamic black is great. If your going to work on actual humans get yourself a primary set of world famous ink, I also really like xtreme ink. If you have any other questions or need help feel free to message me on Instagram @visionstoskin

• 
  @loyaltyfamily44502 ай бұрын

  @tattootheory okay thank you so much

• 
  @grantmonaghan67382 ай бұрын

  I really want the MP5 🙌🏻

• 
  @513virgo2 ай бұрын

  Bro look into the carnivore diet. Cancer can’t survive without sugar in your body. Trust me just do your research. Get well soon

• 
  @tattootheory2 ай бұрын

  Thank you 🙏

• 
  @513virgo2 ай бұрын

  How can I contact u?

• 
  @tattootheory2 ай бұрын

  @@513virgo Instagram @visionstoskin

• 
  @user-mv8uv4xo5e3 ай бұрын

  are madacide wipes safe to use on the cushion leather part of arm rest

• 
  @tattootheory3 ай бұрын

  Yes

• 
  @user-mv8uv4xo5e3 ай бұрын

  @@tattootheory thank you so much subscribed

• 
  @aceartdepot61983 ай бұрын

  Glad too see u back man im also praying for u on your health battles bro stay strong brother

• 
  @Centritattoo3 ай бұрын

  I dont recommend plugging in other battery packs into the machine because the electronics can only go up to 10v 10.5 you blow your LED. Also Alkaline batteries won’t fit as they are bloated. Only use the 9v batteries found on my website next to the machine. Awesome review thanks!

• 
  @krowkowe3 ай бұрын

  Omg its possible to do more stupid design like inkjecta do xD

• 
  @justinf32783 ай бұрын

  That is an interesting machine. Thanks for the review

• 
  @ivanmendoza84573 ай бұрын

  the cobra by inkmachines is one of my favorites and it has a 4mill stroke been wanting to try this machine gonna get it

• 
  @jahart7773 ай бұрын

  What type of camera bro?

• 
  @tattootheory3 ай бұрын

  What do you mean what type of camera?

• 
  @rorinny11414 ай бұрын

  I have this exact machine, recently it has been running but not enough to make the needle move, any suggestions? I tightened the cam but it’ll run loudly and stop sporadically

• 
  @tattootheory4 ай бұрын

  Sounds like your motor is dying, these machines are priced to be disposable I’d recommend buying a new one.

• 
  @stellarlivingstoned4 ай бұрын

  I thought this was a review and not an unboxing! Fucking stoner lmao! You probably dont even smoke weed either!🤣🤣😂😂

• 
  @mischiefincproductions25334 ай бұрын

  Excellent Video! Thanks for the Demo Video! I just had mine deliver and put it together, but for some reason mine will not spin around. Did you have to adjust anything or did it just comr like that right out of the box?

• 
  @tattootheory4 ай бұрын

  Ok so the spinning situation is actually not good for the hydraulic pump, so during testing me and the owner of the company decided to cancel this feature because if the armrest was to continuously spin freely all the time the hydraulics eventually would fail.

• 
  @mischiefincproductions25334 ай бұрын

  I appreciate the quick response. I’m still happy with the arm rest! Although, the spinning option would’ve been cool. Great Video and very informative! This video helped me make my decision to purchase this armrest over the others.

• 
  @sornsuwannamkaew54 ай бұрын

  I have a question about the Rover R1. If used with this model in steady mode, do the power surges last longer than normal?

• 
  @kaylataylor20774 ай бұрын

  Hi there just seeing this video 4 years later as I’ve just started tattooing in my apprenticeship and have bought this machine! Im just curious what voltages you use for different things (lining, packing, whip shading) thank you :))

• 
  @tattootheory4 ай бұрын

  This question is a bit difficult to answer because every tattoo artist works at a different hand speed. What I recommend for you is to start at the lowest voltage and adjust as you learn the machine to make it work for you.

• 
  @jurgenstevensalazartabares12874 ай бұрын

  A fuegooo🔥 Bro, the number aguje uses in the tattoo?

• 
  @markolandesca36534 ай бұрын

  Website??

• 
  @tattootheory4 ай бұрын

  Only available on Amazon through the link in the description on my video

• 
  @A.TAYLOR4 ай бұрын

  How are they compared to eternal? I’ve been using eternal for a while. ❤️‍🔥

• 
  @IAMREDjesus4 ай бұрын

  Just ordered one 🔥

• 
  @tricArt75 ай бұрын

  Hello, do you still use the force? is it still running? I want to get the 4.5 for lining.

• 
  @Tattoo88885 ай бұрын

  ❤❤❤❤

• 
  @the_luminary5 ай бұрын

  Do u still use and Would still recommend this machine the MP5?

• 
  @tattootheory5 ай бұрын

  I use the mp5 tactical now it’s the wireless version it also has upgraded magnets and stuff. Amazing machine.

• 
  @the_luminary5 ай бұрын

  @@tattootheory ooo what do the magnets do exactly. And do you use this as ur daily driver?

• 
  @tattootheory5 ай бұрын

  @@the_luminary they repel each other and I use allot of machines I am always testing new ones.

• 
  @the_luminary5 ай бұрын

  @@tattootheory Oo cool. So if u were to choose one machine that youve used for the rest of your life, which would u choose?

• 
  @tattootheory5 ай бұрын

  @@the_luminary that’s a hard question lol. You looking to buy an mp5? I have a new one I can sell you with the Centri battery pack as well. Let me know if you’re interested.

• 
  @the_luminary5 ай бұрын

  Did i hear her correctly that she basically says that the Mp5 is smooth when she says she didnt feel it(pain) until u used the other machine?

• 
  @tattootheory5 ай бұрын

  Everyone’s pain level is different. But yes she did say that.

• 
  @naryanclaudy21166 ай бұрын

  Who makes the battery you’re using

• 
  @tattootheory6 ай бұрын

  Musotoku

• 
  @user-tf9eo8vt6q6 ай бұрын

  Light temperatures?

• 
  @bramirez12016 ай бұрын

  Can you use Legal size thermal paper on this printer?

• 
  @tattootheory6 ай бұрын

  Yes you can

• 
  @bramirez12016 ай бұрын

  Thanks for your response. @@tattootheory

• 
  @Max-dm3vg7 ай бұрын

  Centri or nuema for outlining,????

• 
  @A.TAYLOR7 ай бұрын

  I’ve saw a few different videos of these Emalla carts and I’m finally going to give them a try! Thanks for the review man! Great videos as always! 🖤🔥💯

• 
  @Richiebones7 ай бұрын

  I have the packer is 5.5 to slow for lining. My power supplier might be off its s cheap 1 . It just hits so hard i turn it way down

• 
  @hulincogeas7 ай бұрын

  I find the packer powerful and as at Bishop they recommend an average voltage between 6 and 8, don't you think that to make lines beyond 8 we start to damage the skin?

• 
  @hulincogeas7 ай бұрын

  Hi, thank you for sharing your experiences; Do you put the whole needle in when you draw lines?

• 
  @punisher69007 ай бұрын

  This is my daily machine absolutely love it I have several high end machines including dragonfly fk irons stigma neuma paradox ECT and this machines id all around a better machine lines like a coil and yet does beautiful black and grey and color packing heals beautifully run it between 5.2 and up for color 5.8 and up for lining and shading coupled with a battery grip it's so well balanced and compact and u can find them as cheap as 25$ but they're usually around 50 to 60 plus 70 for the battery grip and you've got an incredibly cheap yet solid tattoo machine that u can replace easily if needed I've run mine everyday for the past 3 years with no problems what so ever paired with WJX or Derk needles or even CNC police cartridges for precision line work. Hands down my favorite machine I've used in my 15 years of tattooing

• 
  @jrago62287 ай бұрын

  Fantastic, just set it up printing wonderful, hope it lasts!!!! I will try to print something at least once a week to keep it working.

• 
  @tattootheory7 ай бұрын

  Awesome keep me posted.

• 
  @tattootheory7 ай бұрын

  Follow my instagram if you’d like @visionstoskin if you have any issues feel free to message me I’m always here to help.

• 
  @jrago62287 ай бұрын

  What print setting for strncil paper, plain paper or matte?

• 
  @tattootheory7 ай бұрын

  Use matte setting only

• 
  @jrago62287 ай бұрын

  @@tattootheory I will use the 70 % alcohol, each new tank fill u add a cap? Also u r doing print head cleaning each time? Not a power clean correct? Thanks

• 
  @tattootheory7 ай бұрын

  @@jrago6228 yes just head cleaning not power cleaning and 1 cap each new tank fill

• 
  @jrago62287 ай бұрын

  Nice video / information, I see from 3 years ago but have you still had luck with these printers and not clogging up? Just got a new printer since my old one I threw out the window 😊 and want to try and keep it from clogging, the 70% alcohol tip you liked? Head cleaning you did each time (basic print head cleaning correct?) Thanks

• 
  @tattootheory7 ай бұрын

  I’ve hade the same printer for almost 4 years and no problems using the alcohol method

• 
  @mikeharpertattoo47897 ай бұрын

  Is it as punchy as the bishop packer? I had that but found it too hard hitting

• 
  @tattootheory7 ай бұрын

  The 3.5mm stroke model is ridiculously smooth bro. I highly recommend it.

• 
  @tattootheory7 ай бұрын

  As far as punchy like the packer if you turn it up it is very powerful but way smoother not as long of a stroke.

• 
  @Aebl_8 ай бұрын

  Is this machine loud like a coil machine or how is the noise?

• 
  @tattootheory8 ай бұрын

  Does it sound like a coil? Yes. Is it as loud as a coil? No!!

• 
  @Aebl_8 ай бұрын

  @@tattootheory awesome thanks for the info brother

• 
  @tattootheory8 ай бұрын

  @@Aebl_ no problem bro

• 
  @White__Beard8 ай бұрын

  Hi bro.I'm thinking of buying Terra, but I have Aurora 2 and Hurricane HP2 adapters. Will there be any problems in using it? How satisfied are you? Can you recommend it?

• 
  @KOCHIMAFIA7 ай бұрын

  Did you buy terra ?

• 
  @White__Beard7 ай бұрын

  ​@@KOCHIMAFIAI did not buy. I'm undecided between Hawk PEN and Terra