RC pilot from Croatia, with competitiv history in F3J and F3K category. Love to build RC airplanes and fly on RC Airshows, also compiting in F5J. Lehkec Nikola.
Hello. So even though I changed the bulbs my one side isn’t working. Any leads .
@josefeld71646 күн бұрын
Very good!
@mikecoulter942721 күн бұрын
Cage is too small and you're a jerk for allowing them to fight
@cparente7Ай бұрын
Very interesting alternative, thank you.
@danizweifler6061Ай бұрын
Video ist alt.............; hab's erst vor kurzem entdeckt....... // kleine Frage: was macht Dich so sicher, dass der Rumpfhinterteil sich zuerst "verabschiedet" hatte ? / via slowmo im Video sieht man das nicht + Absturzbilder zeugen auch nicht unbedingt davon.... // wie sieht es betr. der Vne-Frage aus ?
@FrankJames-vk1fyАй бұрын
All that noise, whistling sounds it's making = drag.
@cloudhunter2Ай бұрын
Popravka?😢 pogledaj šta sam ja uradio sa jednom Extra 200, imam video na kanalu, trenutno je popravljam, nova uloga će joj biti vučni avion za jedrilice.
@stevenmohr45882 ай бұрын
My ASG29 just left Europe! 🎉 Hoping it gets here in one piece (Australia)?
@Leinadeq2 ай бұрын
can i do that in marzocchi 66 rc3 evo ti ?
@stevenmohr45882 ай бұрын
Thank you Nikola for the unboxing! 😊 I could imagine your distress when you found the elevator was missing. It was great to read it was later found in a second parcel. I really like this model, and I am hopeful to secure one. My big problem is getting it to Australia. 😢
@stevenmohr45882 ай бұрын
Thank you so much for all your ASG29 videos! This one Ive watched many times! I’m a beginner to this level of building, and your photo guide has been extremely helpful on how to do many topics. Thank you for your time and effort. ❤
@grayman5052 ай бұрын
I'm going to try this with my DJ1 and see how it goes
@AldoCugnini2 ай бұрын
Terrific. To do this on the driver side, it looks like the washer tank must first be removed?
@isaaccuartase35463 ай бұрын
This mod sucks 😾
@ell36553 ай бұрын
Wats domics? I’m here cause I read a fb comment about gerbils fighting
@cristhiamarango43204 ай бұрын
Nececito comprar esta pieza
@Kraftei4 ай бұрын
Amazing! This is exactly the situation, I experienced on my 3.5 Meter ASW 24, while doing a dive! My buddy shouted "watch out, she's lowering her "ears" (=wings / wing tips, which means "undercut"), and I either noticed that she did not react in any way on pulling the elevator! My buddy shouted "Spoilers! Spoilers!" so I did, and that obviously rescued my ASW24, as she regained to react on elevators! but that has been in a much greater height than yours! So you definetly had no chance to react! Sorry for your loss!
@user-vu4wt5wt1p6 ай бұрын
That speed with a Ventus should not have been a problem. Not sure what kit it was but maybe not a good one. What can happen is poorly built wings will at high speed twist into a negative position and dive in.
@Truthtellor-vh4ke6 ай бұрын
Add identifies as a P38
@robertolevy64966 ай бұрын
show flying videos.
@flying.fox9876 ай бұрын
You can find many flying videos on my chanel...
@schnitzel24258 ай бұрын
I am flying our ASH25E for a few years now and I am still not entirely comfortable with the approach dimensions. Yours looks great. What serial number is it?
@flying.fox9878 ай бұрын
Not mine, its from a club member 🤷🏼♂️
@MadGQ8 ай бұрын
Hi there, I have a Kona dh bike with the Marzocchi 888 rcv 2008, the fork functions fairly fine however the rebound knob is stuck and unable to move, is it becoz of lack of oil or something, i haven’t serviced the fork or anything yet, please let me know..
@r-k.fotografie20718 ай бұрын
Unverantwortlich wie dieser Pilot überhaupt sein Modell bewegt....man fliegt niemals so nahe an menschen vorbei
@darotizacija10 ай бұрын
it works man but the 2 holes i drill it with 4mm drill a bit bigger and it works fine the rebound is fast in the bottom but on top out its slow sooo DONE!!
@mikesrcgarage10 ай бұрын
At first I thought down elevator instead of up caused the crash but indeed you can hear the flutter just before it dives into the ground... Sad and sorry for your loss it was a beautiful plane.
@AlinaSkania28 күн бұрын
Wie kommt flattern zustande? Sollte es in größerer Höhe passieren, kann das Modell überleben?
@mikesrcgarage28 күн бұрын
It is from the control surfaces not being strong enough to overcome the air speed, weak linkage, servos, or even the surface itself can cause it and when it happens you must slow down to stop it. Flutter can tear your plane apart in the air without hitting the ground. Being up high would help if indeed you slowed down fast enough. Flutter is usually very violent and rips things apart.
@JackBeNimble-fb1fn11 ай бұрын
Thanks for the shitty music and lack of info you useless screw head
@to22ni11 ай бұрын
Nice landing. Bravo!
@TomislavReskovic11 ай бұрын
Bravo! Rich smoke and perfect landing Fox
@leichengift Жыл бұрын
Z1 sport 2008 with this tutorial = new performance:) thx!!!!!!
@hdsrcchannel3258 Жыл бұрын
What is your prop size that you are using on this build ?
@flying.fox987 Жыл бұрын
Sorry, it was long time ago... I think it was 20x8 or 20x6
@Corn-ped Жыл бұрын
Do you know where to get new fork seals for these? USA based.
@flying.fox987 Жыл бұрын
Sorry, bit Im not in cycling for few years, I dont know anymore 🤷🏼♂️
@danielbroennimann9416 Жыл бұрын
Des woars Franzl.😮😢
@rihardsniksklavins4932 Жыл бұрын
Which xenon bulbs you use DS1 or DS2?
@flying.fox987 Жыл бұрын
D2S
@rihardsniksklavins4932 Жыл бұрын
@@flying.fox987 Thanks
@filleholgert1870 Жыл бұрын
Ghana you
@iwontreplybacklol7481 Жыл бұрын
Disappointed with the build quality? Lmfao. If you are that picky, then spend the 6 months to build your own. Bet you cant get it even close to their 'bad' build quality.
@KulisIvan Жыл бұрын
Gdje je staza ?
@Michaelkaerager Жыл бұрын
Overspeed resulting in flutter, easy to hear on the video! leson learned? respect VNE! sorry for your loss..
@flying.fox987 Жыл бұрын
Leson learned 🤷🏼♂️
@ghaniabid Жыл бұрын
genius
@s9523pink Жыл бұрын
Last question for you. What kind of hinge are you using for your canopy, is it your own design, or where did you get it?
@flying.fox987 Жыл бұрын
I use the from furniture 😁
@gr1mre4per Жыл бұрын
i,watching this because my gerbils do this and they also chase each other and its been going for days now i tried seperating them but they insist being with each other and still sleep togheter and sometimes run in the wheel togheter and they are fine but im just worried it wont stop i need advice theyve been togheter for months now
@flying.fox987 Жыл бұрын
Mine did this fight only once... Sorry, but I personaly cant give you an advice 🤷🏼♂️
@gr1mre4per Жыл бұрын
@@flying.fox987 no it’s alright, right now they are messing with my head😂 I was like okay it’s done now I’m making a separate cage and as I am right now preparing one they are now running in the wheel together 💀
@flying.fox987 Жыл бұрын
@@gr1mre4per 😁😁🤷🏼♂️🤷🏼♂️
@CoeShow619 Жыл бұрын
Hello, I just received the same engine. What oil to gasoline mixture are you using. Manual says 30:1 on first page which seems fat, and says 40:1 on the maintenance page. My GP76 runs at 40:1. What do you run? Thanks.
@flying.fox987 Жыл бұрын
I run 40:1 and no problems...
@CoeShow619 Жыл бұрын
@@flying.fox987 Thank you. I will too.
@s9523pink Жыл бұрын
I just about finished my Tangent ASG 29. Did you use the 105 to 107mm for your cg or did you use some other CG point...just curious. And any recommendations on first flight? Mine has the SLS in the fuselage. Thanks for your help!
@flying.fox987 Жыл бұрын
I fly with 107mm cg... For first flight I used recomended throws with expo, and no problem... Its stable glider, good luck 💪💪
@s9523pink Жыл бұрын
@@flying.fox987 thanks so much for the quick reply! Regards!
@TomislavReskovic Жыл бұрын
Bravo FOX!, wish you many many jet flights
@toncekpro Жыл бұрын
Lepo sletanje
@flying.fox987 Жыл бұрын
Hvala... Iako je to tek četvrti let, još bi ga trebalo malo usporit, ali kad je sve u komadu, dobro je :)
@ispettore1cq623 Жыл бұрын
Why not walbro carburetor?
@rafokt Жыл бұрын
Hi man... good job!!!. DLE 130 with Mejzlík 29*10" evo have brutal thrust as I see and I would to know how much your Slick 580 weight ? This info is for my acro plane project. Thanks...
@flying.fox987 Жыл бұрын
Its 12.8kg with full tank...
@cohugh Жыл бұрын
Some (older) models have two Phillips or torque screws holding the air bag in place
@bimerev Жыл бұрын
Predobro :)
@TomislavReskovic Жыл бұрын
Tooo Nikola, najsijači u HR! samo gas i puno sretnih letova ti želim! :)
@flying.fox987 Жыл бұрын
Hvala ti ☺️☺️ Na svakom savjetu i odgovoru na moja pitanja ✌️✌️
Пікірлер
Hello. So even though I changed the bulbs my one side isn’t working. Any leads .
Very good!
Cage is too small and you're a jerk for allowing them to fight
Very interesting alternative, thank you.
Video ist alt.............; hab's erst vor kurzem entdeckt....... // kleine Frage: was macht Dich so sicher, dass der Rumpfhinterteil sich zuerst "verabschiedet" hatte ? / via slowmo im Video sieht man das nicht + Absturzbilder zeugen auch nicht unbedingt davon.... // wie sieht es betr. der Vne-Frage aus ?
All that noise, whistling sounds it's making = drag.
Popravka?😢 pogledaj šta sam ja uradio sa jednom Extra 200, imam video na kanalu, trenutno je popravljam, nova uloga će joj biti vučni avion za jedrilice.
My ASG29 just left Europe! 🎉 Hoping it gets here in one piece (Australia)?
can i do that in marzocchi 66 rc3 evo ti ?
Thank you Nikola for the unboxing! 😊 I could imagine your distress when you found the elevator was missing. It was great to read it was later found in a second parcel. I really like this model, and I am hopeful to secure one. My big problem is getting it to Australia. 😢
Thank you so much for all your ASG29 videos! This one Ive watched many times! I’m a beginner to this level of building, and your photo guide has been extremely helpful on how to do many topics. Thank you for your time and effort. ❤
I'm going to try this with my DJ1 and see how it goes
Terrific. To do this on the driver side, it looks like the washer tank must first be removed?
This mod sucks 😾
Wats domics? I’m here cause I read a fb comment about gerbils fighting
Nececito comprar esta pieza
Amazing! This is exactly the situation, I experienced on my 3.5 Meter ASW 24, while doing a dive! My buddy shouted "watch out, she's lowering her "ears" (=wings / wing tips, which means "undercut"), and I either noticed that she did not react in any way on pulling the elevator! My buddy shouted "Spoilers! Spoilers!" so I did, and that obviously rescued my ASW24, as she regained to react on elevators! but that has been in a much greater height than yours! So you definetly had no chance to react! Sorry for your loss!
That speed with a Ventus should not have been a problem. Not sure what kit it was but maybe not a good one. What can happen is poorly built wings will at high speed twist into a negative position and dive in.
Add identifies as a P38
show flying videos.
You can find many flying videos on my chanel...
I am flying our ASH25E for a few years now and I am still not entirely comfortable with the approach dimensions. Yours looks great. What serial number is it?
Not mine, its from a club member 🤷🏼♂️
Hi there, I have a Kona dh bike with the Marzocchi 888 rcv 2008, the fork functions fairly fine however the rebound knob is stuck and unable to move, is it becoz of lack of oil or something, i haven’t serviced the fork or anything yet, please let me know..
Unverantwortlich wie dieser Pilot überhaupt sein Modell bewegt....man fliegt niemals so nahe an menschen vorbei
it works man but the 2 holes i drill it with 4mm drill a bit bigger and it works fine the rebound is fast in the bottom but on top out its slow sooo DONE!!
At first I thought down elevator instead of up caused the crash but indeed you can hear the flutter just before it dives into the ground... Sad and sorry for your loss it was a beautiful plane.
Wie kommt flattern zustande? Sollte es in größerer Höhe passieren, kann das Modell überleben?
It is from the control surfaces not being strong enough to overcome the air speed, weak linkage, servos, or even the surface itself can cause it and when it happens you must slow down to stop it. Flutter can tear your plane apart in the air without hitting the ground. Being up high would help if indeed you slowed down fast enough. Flutter is usually very violent and rips things apart.
Thanks for the shitty music and lack of info you useless screw head
Nice landing. Bravo!
Bravo! Rich smoke and perfect landing Fox
Z1 sport 2008 with this tutorial = new performance:) thx!!!!!!
What is your prop size that you are using on this build ?
Sorry, it was long time ago... I think it was 20x8 or 20x6
Do you know where to get new fork seals for these? USA based.
Sorry, bit Im not in cycling for few years, I dont know anymore 🤷🏼♂️
Des woars Franzl.😮😢
Which xenon bulbs you use DS1 or DS2?
D2S
@@flying.fox987 Thanks
Ghana you
Disappointed with the build quality? Lmfao. If you are that picky, then spend the 6 months to build your own. Bet you cant get it even close to their 'bad' build quality.
Gdje je staza ?
Overspeed resulting in flutter, easy to hear on the video! leson learned? respect VNE! sorry for your loss..
Leson learned 🤷🏼♂️
genius
Last question for you. What kind of hinge are you using for your canopy, is it your own design, or where did you get it?
I use the from furniture 😁
i,watching this because my gerbils do this and they also chase each other and its been going for days now i tried seperating them but they insist being with each other and still sleep togheter and sometimes run in the wheel togheter and they are fine but im just worried it wont stop i need advice theyve been togheter for months now
Mine did this fight only once... Sorry, but I personaly cant give you an advice 🤷🏼♂️
@@flying.fox987 no it’s alright, right now they are messing with my head😂 I was like okay it’s done now I’m making a separate cage and as I am right now preparing one they are now running in the wheel together 💀
@@gr1mre4per 😁😁🤷🏼♂️🤷🏼♂️
Hello, I just received the same engine. What oil to gasoline mixture are you using. Manual says 30:1 on first page which seems fat, and says 40:1 on the maintenance page. My GP76 runs at 40:1. What do you run? Thanks.
I run 40:1 and no problems...
@@flying.fox987 Thank you. I will too.
I just about finished my Tangent ASG 29. Did you use the 105 to 107mm for your cg or did you use some other CG point...just curious. And any recommendations on first flight? Mine has the SLS in the fuselage. Thanks for your help!
I fly with 107mm cg... For first flight I used recomended throws with expo, and no problem... Its stable glider, good luck 💪💪
@@flying.fox987 thanks so much for the quick reply! Regards!
Bravo FOX!, wish you many many jet flights
Lepo sletanje
Hvala... Iako je to tek četvrti let, još bi ga trebalo malo usporit, ali kad je sve u komadu, dobro je :)
Why not walbro carburetor?
Hi man... good job!!!. DLE 130 with Mejzlík 29*10" evo have brutal thrust as I see and I would to know how much your Slick 580 weight ? This info is for my acro plane project. Thanks...
Its 12.8kg with full tank...
Some (older) models have two Phillips or torque screws holding the air bag in place
Predobro :)
Tooo Nikola, najsijači u HR! samo gas i puno sretnih letova ti želim! :)
Hvala ti ☺️☺️ Na svakom savjetu i odgovoru na moja pitanja ✌️✌️
Da li imas instagram?
Flyingfox987