Hope all is well, dude. Looking forward to future videos!
@volksbuglyКүн бұрын
Awesome! Congrats on getting the mill up and running and making successful parts!
@TomS6993 күн бұрын
are the files up. theres only a few on thingiverse, and wheres the github please
@edwardrichardson82544 күн бұрын
Fun and I guess you've got some $$$ but there are shops that do this rapid prototyping waaaaay quicker, waaaaay better, and can do things you can't. I found one (the only one on the planet) with an electron beam welder in a vacuum chamber that could make a single electron beam welded titanium monocoque for a car. When I spoke to one of their salesmen, they had just used that machine to makes fabricate a satellite for Lockheed Martin going into space that they were doing burst testing on. You want to draft your parts in SolidWorks, Siemens NX, or whatever and shoot it out to those people. We're talking Compacted Graphite Iron foundries (one I spoke with made CGI engines for NASCAR when they ran them), carbon fiber driveshafts, carbon fiber looms for doing monocoques and wheels, aluminum forging. Something to consider before spending $$$ on machines.
@markg15315 күн бұрын
Porsche is not pronounced "porsh".
@brian-t-5 күн бұрын
now you are expert at c and c, and computer stuff. i am a red seal electrician. Circa to 1962 I took my training. You should look up, Add-A-Phase, on the web. add a phase!! 4 months...youv'e already done this.... add a phase (a capacitor and a inductor) now it's not the stuff from an old radio! the capacitor should look like an amunition box. You add a phase by doing this.... to this new phase you connect through a capacitor to one line, and to the other line through the inductor! and you have instant three phase.... OR you could buy an "add-a-phase" I have never actually worked on one, but it's there.... it's there!!
@jgreelis5 күн бұрын
Fear and loathing in a 928. Nicely done.
@cauelisboa81175 күн бұрын
Bro, Where can I buy a motor for my project like yours?
@coy43825 күн бұрын
Where did you learn all of your machining skills?
@janwall26486 күн бұрын
I am building one m120 to fit in an old Ferrari body, the throttle bodies that you made would match the original set-up for my car. Are there drawings available somewhere?
@EnglishManinPrague6 күн бұрын
I think we are due an update? great work you are very clever. Hi from Prague.
@EnglishManinPrague6 күн бұрын
Any chance of an update? I was loving your videos on this project but they do not happen so often.
@seansilva9677 күн бұрын
I’m tardy to the party but this is awesome
@PatrickWolf-tl5wq8 күн бұрын
Keep building!!!
@PatrickWolf-tl5wq8 күн бұрын
So glad i found you, feeling a calling to be doing the same kinda thing.
@One_Guy9 күн бұрын
how's it running today?
@joshuabrickel09 күн бұрын
holy wow dude, looking great! congrats
@pascaljean233310 күн бұрын
Bru.... i mean... Bru.... 😧 ... i mean...😶🌫... wow
@ProcrastinationDaily10 күн бұрын
Damn boss you’re looking good!
@ali110alami10 күн бұрын
I'm so disappointed, you promised something else first and made something else.
@MrAcuta7312 күн бұрын
If you paid more than a hundred bucks for that saw you got robbed, but dang...that was an Adam Savage++ restoration! Nice!!
@James1Hiscox12 күн бұрын
My feedback. Super, super cool. Can't wait to see the finished product.
@akun2414 күн бұрын
I accidentally stumbled across your videos from a KZread reel and Holly crap. What you’re doing is incredible. That V12 sounds like an old F1 car from back when they sounded like race cars, it’s music to my ears. I’m excited to see the project advance and hear your little one liners. Thanks for sharing it with the world.
@sprezzatura875516 күн бұрын
Great video. I have heard that some 928 owners are installing 6-speed Corvette transmissions with great success.
@cecilcompagnon59516 күн бұрын
Awesome work. Great looking setup.
@AdminGrayArchery17 күн бұрын
Hi. Use proper cutting fluid. it will improve the longevity of your tools and prevents rusting. . Nice work. . .
@lovomustang159217 күн бұрын
Wow potentially kill free value if contained the bars
@jasonalper789818 күн бұрын
Where did you get the screen from
@VictorVazquez-sz1bl20 күн бұрын
Can you drop it into the rear of a 1980s dually truck with an 8 foot bed.
@frenkloyd427720 күн бұрын
Ciao, for how much money?
@ArmySigs20 күн бұрын
All I can afford is this old shit box so I'm gonna tell you it's a "masterpiece" to make myself feel better. There you go, fixed the title for you.
@personwhoiam20 күн бұрын
Bro! you are amazing!
@user-ee6gp5gv5l21 күн бұрын
Electrical computers are mechanical computers!
@srivathsansudarsanan337223 күн бұрын
Man awesome cmm. Really love to work with cmm. As long as you maintain and keep all the oil (Coolant, Lube and Hydraulic oil) topped correctly. Thing will run very well. A cmm is overkill for a single man. But okay.
@JB9171024 күн бұрын
Wesley. Check out my Porsche 917/10 replica. You might want to take it on for a project and take it to the next level.
@jameslaiola497628 күн бұрын
Im wanting to do this. May i respectfully ask of this helps protect the Vehicles frame?
@kiwiPatchAzАй бұрын
You should check out Brother S500 when you are far enough along. very good machine and fast for the price. Its BT30 and machine itself is solid. Also I would recommend adding more oil to the coolant. Part looks great! how did you level the machine?
@wikuscombrinck512Ай бұрын
Awesome! I want to see more content. Greetings from South Africa!
@DozITАй бұрын
What a beast!
@1967250sАй бұрын
Excellent! One for the algorithm, lol.
@dichoseadepasoАй бұрын
i might be a little late, but i work at CNC repair service and i've seen a lot of old Fadal machines. If you need anything im happy to help! i would really recommend to use DNC communication for long programs and do a Parameter backup.
@asurakim6982Ай бұрын
why don't you try electronic solenoid valve? it is much faster and accurate .
@josephvo223Ай бұрын
good job bro
@SausketoАй бұрын
Definately needs to be ballanced a little better
@aimless3827Ай бұрын
If you see this!! I know that, I'm about 3 years late but what do u think about use BLDC to rotate cam shaft? Since BLDC can move to percise angle with sensors it also can increse and decrese rotation speed.
@user-js9xv6zb3pАй бұрын
10/10
@ViralvlogvideosАй бұрын
as a software developer, I see you have done a great job. you can learn python if your interested to explore
Пікірлер
12:00 great taste in music my guy
Hope all is well, dude. Looking forward to future videos!
Awesome! Congrats on getting the mill up and running and making successful parts!
are the files up. theres only a few on thingiverse, and wheres the github please
Fun and I guess you've got some $$$ but there are shops that do this rapid prototyping waaaaay quicker, waaaaay better, and can do things you can't. I found one (the only one on the planet) with an electron beam welder in a vacuum chamber that could make a single electron beam welded titanium monocoque for a car. When I spoke to one of their salesmen, they had just used that machine to makes fabricate a satellite for Lockheed Martin going into space that they were doing burst testing on. You want to draft your parts in SolidWorks, Siemens NX, or whatever and shoot it out to those people. We're talking Compacted Graphite Iron foundries (one I spoke with made CGI engines for NASCAR when they ran them), carbon fiber driveshafts, carbon fiber looms for doing monocoques and wheels, aluminum forging. Something to consider before spending $$$ on machines.
Porsche is not pronounced "porsh".
now you are expert at c and c, and computer stuff. i am a red seal electrician. Circa to 1962 I took my training. You should look up, Add-A-Phase, on the web. add a phase!! 4 months...youv'e already done this.... add a phase (a capacitor and a inductor) now it's not the stuff from an old radio! the capacitor should look like an amunition box. You add a phase by doing this.... to this new phase you connect through a capacitor to one line, and to the other line through the inductor! and you have instant three phase.... OR you could buy an "add-a-phase" I have never actually worked on one, but it's there.... it's there!!
Fear and loathing in a 928. Nicely done.
Bro, Where can I buy a motor for my project like yours?
Where did you learn all of your machining skills?
I am building one m120 to fit in an old Ferrari body, the throttle bodies that you made would match the original set-up for my car. Are there drawings available somewhere?
I think we are due an update? great work you are very clever. Hi from Prague.
Any chance of an update? I was loving your videos on this project but they do not happen so often.
I’m tardy to the party but this is awesome
Keep building!!!
So glad i found you, feeling a calling to be doing the same kinda thing.
how's it running today?
holy wow dude, looking great! congrats
Bru.... i mean... Bru.... 😧 ... i mean...😶🌫... wow
Damn boss you’re looking good!
I'm so disappointed, you promised something else first and made something else.
If you paid more than a hundred bucks for that saw you got robbed, but dang...that was an Adam Savage++ restoration! Nice!!
My feedback. Super, super cool. Can't wait to see the finished product.
I accidentally stumbled across your videos from a KZread reel and Holly crap. What you’re doing is incredible. That V12 sounds like an old F1 car from back when they sounded like race cars, it’s music to my ears. I’m excited to see the project advance and hear your little one liners. Thanks for sharing it with the world.
Great video. I have heard that some 928 owners are installing 6-speed Corvette transmissions with great success.
Awesome work. Great looking setup.
Hi. Use proper cutting fluid. it will improve the longevity of your tools and prevents rusting. . Nice work. . .
Wow potentially kill free value if contained the bars
Where did you get the screen from
Can you drop it into the rear of a 1980s dually truck with an 8 foot bed.
Ciao, for how much money?
All I can afford is this old shit box so I'm gonna tell you it's a "masterpiece" to make myself feel better. There you go, fixed the title for you.
Bro! you are amazing!
Electrical computers are mechanical computers!
Man awesome cmm. Really love to work with cmm. As long as you maintain and keep all the oil (Coolant, Lube and Hydraulic oil) topped correctly. Thing will run very well. A cmm is overkill for a single man. But okay.
Wesley. Check out my Porsche 917/10 replica. You might want to take it on for a project and take it to the next level.
Im wanting to do this. May i respectfully ask of this helps protect the Vehicles frame?
You should check out Brother S500 when you are far enough along. very good machine and fast for the price. Its BT30 and machine itself is solid. Also I would recommend adding more oil to the coolant. Part looks great! how did you level the machine?
Awesome! I want to see more content. Greetings from South Africa!
What a beast!
Excellent! One for the algorithm, lol.
i might be a little late, but i work at CNC repair service and i've seen a lot of old Fadal machines. If you need anything im happy to help! i would really recommend to use DNC communication for long programs and do a Parameter backup.
why don't you try electronic solenoid valve? it is much faster and accurate .
good job bro
Definately needs to be ballanced a little better
If you see this!! I know that, I'm about 3 years late but what do u think about use BLDC to rotate cam shaft? Since BLDC can move to percise angle with sensors it also can increse and decrese rotation speed.
10/10
as a software developer, I see you have done a great job. you can learn python if your interested to explore
We need more videos with this VALVES!!!)
The best Mercedes