Brilliant informational video for the Novice DIYer 👏👏👏
@davidharris38233 ай бұрын
Interesting, I got a new U17 and I don't have anything like that, no pin to pull etc. I don't know how to change my bucket as of yet nor do I know what keeps the bucket currently on from falling off.
@davidharris38233 ай бұрын
I was suppose to have a quick hitch when I bought it but it didn't come with it. Until I get that sorted out I want to change buckets.
@bearplant3 ай бұрын
If you have no quick hitch on at all then you will need to take out the 2 pins connecting the bucket on every time you want to change buckets. I would recommend greasing them every time, once you've changed buckets. I could probably do a video for this at some point if it would be helpful?
@davidharris38233 ай бұрын
Turns out it's a quick hitch, just a very new design that doesn't use a pin, it stumped the Kubota Teck until he figured it out So I'm happy with it as it is a quick hitch + I can put my buckets on in reverse (be handy in the cemetery). Dave
@bearplant3 ай бұрын
@@davidharris3823 ideal. Yes some jobs are so much easier with the bucket on backwards 👍
@stevem97764 ай бұрын
Great vid, clear and informative. Do you know where you top up the hydraulic fluid?? Steve
@bearplant4 ай бұрын
Thanks Steve 👍 Hydraulic filler cap should be under the bonnet, opposite side to the fuel filler.
@bobrose79005 ай бұрын
Well done and a good result, shame about the missing return valve/port. I have Engcon on a 3T and it works similarly. The Rhinox manual quick hitch on a 1.2T is a pain, even with their buckets. Makes for a good workout though! A couple of hopefully constructive comments: get some wrap for the hoses and a grease gun for Christmas!
@bearplant5 ай бұрын
Yes once you have a hydraulic hitch on one machine it's hard to not want them on everything! Yes wrap would be a good Idea 👍 though some customers seem to be able to damage anything... 🤦 Does it look un-greased? Everything gets greased before it goes out on hire - but I also hate overgreasing as the grease needlessly running down the arm and smearing everywhere really bugs me 🤣🤦
@markedwards43315 ай бұрын
Whats with crazy music really annoying.
@bearplant5 ай бұрын
Lol, sorry it's not meant to be annoying. I'm afraid I'm only learning what works for videos 👍
@rachelmorellet26655 ай бұрын
Thankyou! Our track just came off, now we know how to get it on again
@bearplant5 ай бұрын
No problem 👍
@waylon24325 ай бұрын
'PromoSM'
@randomnkbr6 ай бұрын
Thanks 👍
@bearplant6 ай бұрын
No worries 👍
@sinanal-hermiz52266 ай бұрын
Many many thx for teaching me this amazing easy way to change the truck.. I really appreciate it 🙏 God bless you 🙏
@bearplant6 ай бұрын
You're welcome, glad it's been of some use 👍
@user-cd4uo6ke8w6 ай бұрын
Fiyatı nedir
@bearplant5 ай бұрын
Around £20k I think
@IHustleHard4166 ай бұрын
How much for this quick connect
@bearplant6 ай бұрын
Sorry I don't know as it came with the machine. Try giving your local dealer a call 👍
@grmichta55416 ай бұрын
Pozdrowienia z Polski. Też będę teraz naprawiał hamulce teraz wiem jak 😅
@bearplant6 ай бұрын
Great 👍 Greetings from the UK
@dognott7 ай бұрын
Thanks for the vid, just did my K008 on a hillside in the middle of nowhere!
@bearplant7 ай бұрын
Nice 👍 Once you've done one rubber tracked machine they're all pretty much the same, just they get very heavy for bigger machines!
@nitinmore6238 ай бұрын
👏👏👏👏👏💐💐💐💐💐
@pranayborje48009 ай бұрын
N=p
@bearplant5 ай бұрын
👍
@lukestarling68109 ай бұрын
1 tonne skip loader?
@bearplant9 ай бұрын
Yep 👍
@lukestarling68109 ай бұрын
@@bearplant always handy them
@bearplant9 ай бұрын
@@lukestarling6810 yes I run a few thwaites. They seem decent machines
@lukestarling68109 ай бұрын
@@bearplant speaking as a groundworker they are by far the best and reliable dont skip a beat and everyone I know in the trade prefers thwaites
@kimdani179510 ай бұрын
would have chosen with tilt
@bearplant10 ай бұрын
Would be nice, but not worth it for a hire machine 👍
@Chapstick438710 ай бұрын
Good video, about to change my tracks on my yanmar sv08 so this video helps a lot. Thanks!
@bearplant10 ай бұрын
Great 👍
@user-nh4pq2rs2h10 ай бұрын
That "kit" is missing a lot of stuff lol😂
@bearplant10 ай бұрын
True! 🤣
@user-nh4pq2rs2h10 ай бұрын
@bearplant I'm in the process of buying a Chinese mini excavator , I think will follow ur tips in this , do you know more less to what pressure is this solenoid rated ?
@CaryCrites11 ай бұрын
Can a bucket be installed reverse on one of these Kubota excavators? Thanks for the video!
@bearplant11 ай бұрын
On all the Kubota machines I have - yes no problem 👍 There are certain types of quick hitch an bucket designs that it doesn't, but they're not so common.
@CaryCrites11 ай бұрын
Thank you!
@patrickjohannik955411 ай бұрын
Which quick hitch are you using
@bearplant11 ай бұрын
This machine has a whites hitch on it 👍
@patrickjohannik955411 ай бұрын
Thank you. Will have to look that one up. Is that standard pin cofig or convert to S30
@bearplant11 ай бұрын
@@patrickjohannik9554 as far as I know it's standard. I think that's the make Kubota UK fit unless you ask for something else.
@RidgewoodDriveways-u2u12 күн бұрын
Great Video! Thanks
@hamishpedersen565111 ай бұрын
Champion, thank you !
@bearplant11 ай бұрын
Thanks
@tacomafan7488 Жыл бұрын
Great video !!!
@bearplant Жыл бұрын
Thanks 👍
@user-qw5us6tx7d Жыл бұрын
I'v got one the same done about 300 hours and it is excelent.
@bearplant Жыл бұрын
Nice, yes it really is a good machine. I'd love another but they keep going up in price!
@mauriceclosset8008 Жыл бұрын
C esr possible le francais merci
@Leo-ji8yh Жыл бұрын
This was very useful thank you
@stevedue4485 Жыл бұрын
I ended up removing my hydraulic quick connector as kept breaking connectors on hoses, poor design , digging anything deeper than bucket would amount to rubbing them off.
@bearplant Жыл бұрын
That's interesting. What make was the hitch? These pipes actually broke after about 20 hours of use but after replacing them and routing them better on the arm, they seem to have been ok since with no problems
@stevedue4485 Жыл бұрын
It is a china digger and hitch. Smaller arm as well went on top of arm which is ok but out of the hitch they cam out the side instead of like yours Ollie is cute lol
@bearplant Жыл бұрын
Ok, yes these pipes are tucked reasonably well out of harm's way - but stuff happens! As for Ollie... he's a cheeky monkey like them all 🤣
@villageearthwright Жыл бұрын
Really great video, i appreciate seeing this whole process. I do a lot of tinkering on my own machines and love to see how things like this quick hitch are installed. How come you didn't get a new hitch that fit your old buckets?
@bearplant Жыл бұрын
Thanks 👍 The hitch that was on it was made to take a different size pin setup to a standard one for that machine, which was a pain as it meant it wouldn't fit other attachments I had for other identical machines. But actually buckets and their pins (especially when they're welded into the bucket and you can't change them) get worn out and sloppy aswell.
@TMKMachinery Жыл бұрын
Nice video, especially loved your commentary! 😄👏 Those were some descent sized tree to say the least. Nice to hear you like the shear! -Jesse
@bearplant Жыл бұрын
Thanks. It's out on it's first hire and the customer loves it, especially the collector. 👍
@TMKMachinery Жыл бұрын
@@bearplant Wow that's awesome to hear! -Jesse
@haggardridingkohn2057 Жыл бұрын
Is that a 24inch toothed bucket? How well does the machine handle it? I just got a u17 and would like to get a bigger dig bucket
@bearplant Жыл бұрын
Yes it's a 24". They handle them ok actually, no more load weight than than the grading bucket 👍
Пікірлер
Great Video! Thanks 👍🏼
No problem, Cheers 👍
Brilliant!
Brilliant informational video for the Novice DIYer 👏👏👏
Interesting, I got a new U17 and I don't have anything like that, no pin to pull etc. I don't know how to change my bucket as of yet nor do I know what keeps the bucket currently on from falling off.
I was suppose to have a quick hitch when I bought it but it didn't come with it. Until I get that sorted out I want to change buckets.
If you have no quick hitch on at all then you will need to take out the 2 pins connecting the bucket on every time you want to change buckets. I would recommend greasing them every time, once you've changed buckets. I could probably do a video for this at some point if it would be helpful?
Turns out it's a quick hitch, just a very new design that doesn't use a pin, it stumped the Kubota Teck until he figured it out So I'm happy with it as it is a quick hitch + I can put my buckets on in reverse (be handy in the cemetery). Dave
@@davidharris3823 ideal. Yes some jobs are so much easier with the bucket on backwards 👍
Great vid, clear and informative. Do you know where you top up the hydraulic fluid?? Steve
Thanks Steve 👍 Hydraulic filler cap should be under the bonnet, opposite side to the fuel filler.
Well done and a good result, shame about the missing return valve/port. I have Engcon on a 3T and it works similarly. The Rhinox manual quick hitch on a 1.2T is a pain, even with their buckets. Makes for a good workout though! A couple of hopefully constructive comments: get some wrap for the hoses and a grease gun for Christmas!
Yes once you have a hydraulic hitch on one machine it's hard to not want them on everything! Yes wrap would be a good Idea 👍 though some customers seem to be able to damage anything... 🤦 Does it look un-greased? Everything gets greased before it goes out on hire - but I also hate overgreasing as the grease needlessly running down the arm and smearing everywhere really bugs me 🤣🤦
Whats with crazy music really annoying.
Lol, sorry it's not meant to be annoying. I'm afraid I'm only learning what works for videos 👍
Thankyou! Our track just came off, now we know how to get it on again
No problem 👍
'PromoSM'
Thanks 👍
No worries 👍
Many many thx for teaching me this amazing easy way to change the truck.. I really appreciate it 🙏 God bless you 🙏
You're welcome, glad it's been of some use 👍
Fiyatı nedir
Around £20k I think
How much for this quick connect
Sorry I don't know as it came with the machine. Try giving your local dealer a call 👍
Pozdrowienia z Polski. Też będę teraz naprawiał hamulce teraz wiem jak 😅
Great 👍 Greetings from the UK
Thanks for the vid, just did my K008 on a hillside in the middle of nowhere!
Nice 👍 Once you've done one rubber tracked machine they're all pretty much the same, just they get very heavy for bigger machines!
👏👏👏👏👏💐💐💐💐💐
N=p
👍
1 tonne skip loader?
Yep 👍
@@bearplant always handy them
@@lukestarling6810 yes I run a few thwaites. They seem decent machines
@@bearplant speaking as a groundworker they are by far the best and reliable dont skip a beat and everyone I know in the trade prefers thwaites
would have chosen with tilt
Would be nice, but not worth it for a hire machine 👍
Good video, about to change my tracks on my yanmar sv08 so this video helps a lot. Thanks!
Great 👍
That "kit" is missing a lot of stuff lol😂
True! 🤣
@bearplant I'm in the process of buying a Chinese mini excavator , I think will follow ur tips in this , do you know more less to what pressure is this solenoid rated ?
Can a bucket be installed reverse on one of these Kubota excavators? Thanks for the video!
On all the Kubota machines I have - yes no problem 👍 There are certain types of quick hitch an bucket designs that it doesn't, but they're not so common.
Thank you!
Which quick hitch are you using
This machine has a whites hitch on it 👍
Thank you. Will have to look that one up. Is that standard pin cofig or convert to S30
@@patrickjohannik9554 as far as I know it's standard. I think that's the make Kubota UK fit unless you ask for something else.
Great Video! Thanks
Champion, thank you !
Thanks
Great video !!!
Thanks 👍
I'v got one the same done about 300 hours and it is excelent.
Nice, yes it really is a good machine. I'd love another but they keep going up in price!
C esr possible le francais merci
This was very useful thank you
I ended up removing my hydraulic quick connector as kept breaking connectors on hoses, poor design , digging anything deeper than bucket would amount to rubbing them off.
That's interesting. What make was the hitch? These pipes actually broke after about 20 hours of use but after replacing them and routing them better on the arm, they seem to have been ok since with no problems
It is a china digger and hitch. Smaller arm as well went on top of arm which is ok but out of the hitch they cam out the side instead of like yours Ollie is cute lol
Ok, yes these pipes are tucked reasonably well out of harm's way - but stuff happens! As for Ollie... he's a cheeky monkey like them all 🤣
Really great video, i appreciate seeing this whole process. I do a lot of tinkering on my own machines and love to see how things like this quick hitch are installed. How come you didn't get a new hitch that fit your old buckets?
Thanks 👍 The hitch that was on it was made to take a different size pin setup to a standard one for that machine, which was a pain as it meant it wouldn't fit other attachments I had for other identical machines. But actually buckets and their pins (especially when they're welded into the bucket and you can't change them) get worn out and sloppy aswell.
Nice video, especially loved your commentary! 😄👏 Those were some descent sized tree to say the least. Nice to hear you like the shear! -Jesse
Thanks. It's out on it's first hire and the customer loves it, especially the collector. 👍
@@bearplant Wow that's awesome to hear! -Jesse
Is that a 24inch toothed bucket? How well does the machine handle it? I just got a u17 and would like to get a bigger dig bucket
Yes it's a 24". They handle them ok actually, no more load weight than than the grading bucket 👍