dear glenn i watched with interest your video free ing up the stuck wheels on your lining tool. i want a lining tool but dont like the idea of paying almost the same price for postage as is the tool. i would very much lkike to buy the one that you have freed up i will give you what you want just name your price... cheers regards laurence from nottingham robin hood country !
@GlennsSpeedShop17 сағат бұрын
Great to hear from you, i am not interested in selling it. We will be building a Gypsy Wagon / House Truck on the back of my 1936 Ford Truck one day and during the painting of it, having 2 striping tools will allow me to do 2 colors at a time. Thanks Glenn
@TS1964Күн бұрын
4 minutes into the video before the review begins!
@Dennco2000Күн бұрын
Holy cow what a turd bucket but if it cuts..... it cuts God bless ya man.
@roypoe1865Күн бұрын
Clean scratches really well, fill with 2 part epoxy, sand flush. Clean very well, primer and paint!
@mbormann60462 күн бұрын
Use an old refrigerator compressor for a vacuum pump , great for brakes, small engines and trans fluid change out.
@Jeg_er_grim3 күн бұрын
when the oil is hot it works way better got many of these have not been under a car in years and done many oil changes
@jacknevitt73844 күн бұрын
That turned out great!
@johnattinello29114 күн бұрын
I'm headed to Walmart in the morning for this stuff. I worked 5 hours today trying to remove rust on some older Cragar wheels using aluminum foil and Blaster (WD40 did nothing). My finger nails are black, my thumbs are sore and I have cramping in my hand!
@darrellwampler38824 күн бұрын
Wow nice job. I hope it holds up
@GlennsSpeedShop4 күн бұрын
So far, so good .. i had a freind not recognize my car the other day , looks much better...
@danielnatian93424 күн бұрын
Please can you tell me which is the Diodes number D904 and resistance R 938 Thank you
@GlennsSpeedShop4 күн бұрын
Sorry...beyond my capabilities....
@danielnatian93424 күн бұрын
@GlennsSpeedShop it's Ok! Thank you for reply.
@christinaapluslift6 күн бұрын
Thanks for reviewing our lift!!
@johnsutter14977 күн бұрын
Can you please recommend a good import AC/DC tig machine? Thank you
@GlennsSpeedShop6 күн бұрын
I am the wrong person to ask... So far i have not ventured into the world of TIG. One day hopefully. Glenn
@timshull597 күн бұрын
If the shop had the broke lugs on the counter? Sounds like an overzealous guy on air the gun.
@GlennsSpeedShop6 күн бұрын
No... The owner went from factory hub centered wheels to aftermarket lug centered wheels, put on a heavy camper and pulled a trailer and broke a couple wheel studs. Fors superduty wheel studs are designed to hold the wheel to the hub, not support the weight of truck and overloaded cargo.
@miguelburgos-garcia56817 күн бұрын
what Carburetor did you get? I have the same mower i would like to get running again.
@GlennsSpeedShop7 күн бұрын
Just an Amazon purchase. 12 to 15 bucks. Normally work well... Glenn
@soulofhawk17428 күн бұрын
Hello Sir, I enjoy your content, and the education. Ive bought a 1998 Yamaha gas golf cart that needs new clutch. Can you give me your best estimate of what I should pay?? Please and Thank You.
@GlennsSpeedShop8 күн бұрын
Here is a link to a Drive and driven clutch kit with belt and removable tool. Subtract 200 bucks if you only replace the drive clutch. Good luck Glenn
@user-qn1xr8rc6y9 күн бұрын
Does the cover just pop off
@GlennsSpeedShop8 күн бұрын
What cover? I dont think any covers pop on or off. Its been 3 years. Want to buy it?
@user-qn1xr8rc6y7 күн бұрын
@@GlennsSpeedShop how much
@GlennsSpeedShop6 күн бұрын
900? Have clean title. Has not run after these videos. Is dirty and the front tire is flat. New battery still in the box.
@magdong88399 күн бұрын
Put the solar power through the regular input. the jump box might work as a charge controller
@Agustin-jo8mv10 күн бұрын
Nice man! I hope you got your money back from all that work. I considered this for a second but ill let my deck rust. haha. sheeeesh. I am however going to see if I can find another L100 mower for cheap in the area.
@velimakesmusic10 күн бұрын
Dude… i was wondering how to get it off the back pulley! Thank you !
@darrellwampler388210 күн бұрын
Perfect👍
@cubey11 күн бұрын
I have a 90s Yamaha EF600 (500W/600W peak) and I have used the heck out of it since I got it in January 2017.
@GlennsSpeedShop11 күн бұрын
I have owned Yamaha Generators, and they are great machines. I did a few videos for an overseas generator company that used Yamaha engines for their generators. I'm not sure that the company survived the pandemic.
@JohnMatrixOfficial11 күн бұрын
Do you think this model would fit in a short bed 2002 f250 crew cab?
@GlennsSpeedShop11 күн бұрын
The issue is keeping the weight center in front of the rear axle so... No. You will need to find a camper designed for your box size. If the center of the weight sits behind the rear axle it takes weight off the front axle. I have seen it done, but think of all the bad things that can happen.
@JohnMatrixOfficial11 күн бұрын
@@GlennsSpeedShop thank you for your advice and time.
@darrellwampler388211 күн бұрын
Clean install. 👍
@GlennsSpeedShop11 күн бұрын
Thanks 👍
@kabuti283912 күн бұрын
looks like you found a real gem!
@stevecurry578515 күн бұрын
Im jealous as im looking for a complete hood for my LA 105 here in NB Canada As the last owner hit every tree on his property more than once and even busted the front axle Beer may have been involved too ? But it seems nobody on fleabay wants to ship one to Canada and im close to Maine ...go figure ill pay good money if anybody wants to ship me one COD ?
@GlennsSpeedShop14 күн бұрын
Good luck finding one, dont give up!
@stevecurry578514 күн бұрын
@@GlennsSpeedShop Thanks i may turn the hunt into a holiday if i can get a Canadian passport in less than a year ? Or just use the spray tan as those guys dont seem to need a passport ? I also want a 42 or 44 double stage snowblower for the winter So ill take a few bucks with me
@tonymartin79015 күн бұрын
That mullet shadow is epic
@wh87715 күн бұрын
My Neighbor has one of these bought new 1998. I have serviced it since new. it has been a great mower. he cuts 3 acres at the house then drives it it a little ways over to his vacant lot to mow the frontage.
@GlennsSpeedShop14 күн бұрын
I know they are well built by JD, however they are not the same as any JD Model. They are unique!
@chappyboylsx259617 күн бұрын
I need a hood for one of them, i have 2554s model
@GlennsSpeedShop16 күн бұрын
I actually have a hood out back for one. Have to be sure it is the one you need. I am in Oregon and you can have it if your close enough
@josephwillis510117 күн бұрын
Very helpful in every aspect, thanks again for making this video
@idanny-xz6bf17 күн бұрын
Looks good dude you do really good work 👍.
@YourLocalCountryBoy2318 күн бұрын
I got a free mower off a guy Destroyed the Flywheel I mean it was gone the Screen was literally inside the damn fly wheel they still used it and it blew up so i had a 20hp engine and I now got a 20hp La105 I dont know the hrs on the Engine I threw on it had to Make my own vaccum for the Fuel pump and ziptied the fuel pump to the oil dipstick it runs again Love it but Ik itsxa fake deere but Maintain your mower cause some may have loose screens and they will fall it idk how but they do gonna tear the engine down and see how bad the engine is and see if i can have a spare engine for another mower if I get one
@GlennsSpeedShop17 күн бұрын
Spare engines are good to have! If you have one, you will never need it! LOL Glenn
@YourLocalCountryBoy2317 күн бұрын
@GlennsSpeedShop I got 2 engines locked up so imma try to get them running
@killaman759218 күн бұрын
I really wish you made a video on the deck and how to properly adjust it, tips and tricks, etc. but I truly enjoy these old JD's
@darrellwampler388218 күн бұрын
Nice job👍
@zonie7019 күн бұрын
I have a honda collection also . E40 . E300, E400, E500, E600, ,EX800,E900,EX1000,Eu1000 ,Eu2000 and EU2200, None smoke . 😊
@GlennsSpeedShop19 күн бұрын
Is the E40, a small 40 watt Honda Gen that was given to some Honda dealers by Honda? One was for sale recently around here..
@zonie7019 күн бұрын
@@GlennsSpeedShop They were sold with a small Sony tv also. It was in a kit
@nicknino461520 күн бұрын
Is it possible I have a chevrolet motor with corvette engine #3731398 3749965 L12
@GlennsSpeedShop20 күн бұрын
I am not a GM Guy, but anything is possible.
@nicknino461521 күн бұрын
Thank for telling me boyertown used Ford and chevy still trying to find vin # and find exact make and model
@rayjrdibenedetto86721 күн бұрын
Good morning. Enjoyed the video. Just wondering what you would get or asking price for a machine like this ? Thank you and have a good day
@GlennsSpeedShop21 күн бұрын
I would get about $800 give or take 100 depending on condition. JDs are very easy to sell where i am
@rayjrdibenedetto86721 күн бұрын
@@GlennsSpeedShop Hi. I did subscribe when i watched your video. Have watched a couple and forgot to but did now. Thank you. I have a john deere 160 and my favorite is my LX178. My wife just bought me a Piranha 44 deck from out of state for this machine. My LX178 does blow some smoke when starting it up and I believe the valve seals need to be replaced. Bought them and will get to them at some point-just a lot going on is all. I do need to remove the hood on this machine and I’m sure you know how those hoods are and with so much going on wondering if you did have a video on this so i don’t break anything? Thank you for getting back to me about my first question also. Looking forward to more videos. Thank you and have a good day
@carlloftin285022 күн бұрын
All the oil removal vids with single use products and the multitasker of brake clean and cat litter wins… I have both on hand already …😊
@Ricksp6522 күн бұрын
Good video I just found one exactly like that in the trash kind of knew what was wrong with it before I even got it on the workbench methanol poisoning soon as I took the bowl off of the carburetor it was full of the telltale corrosion that happens when people run Alcohol gasoline in them clean the carb and she started right up. I plan on ordering a new carburetor for it so it can be a reliable unit.
@GlennsSpeedShop21 күн бұрын
Score!
@nicknino461522 күн бұрын
Where did you find vin please help
@GlennsSpeedShop21 күн бұрын
I have answered this before... As you walk in the side door, on the right just below the windshield. 2 tags. One from Boyertown and one from Ford.
@nicknino461521 күн бұрын
Do you mean fron windshield or right side windshield
@nicknino461521 күн бұрын
My motor is a chevy motor a cheroket motor would that be boyertown still possibly
@GlennsSpeedShop21 күн бұрын
@nicknino4615 yep... Boyertown used both ford and chevy
@nicknino461522 күн бұрын
Where did you find vin I have one similar can't find it
@DavidJohnson-lj6ct23 күн бұрын
Read the instructions. The liquid is supposed to seep at that joint.
@GlennsSpeedShop21 күн бұрын
Yep...
@trevortrevortsr223 күн бұрын
I would have put two server rack batteries in it or a crashed 48v hybrid battery and a PWM controller
@GlennsSpeedShop21 күн бұрын
Server rack batteries would never fit the space. I gave never seen a hybrid at 48 volts. When you buy rigs like this to fix and flip, its best to keep it simple and keep the cost down so you can make a profit and keep the next owner excited to own it.
@jonathanwhalen104124 күн бұрын
Thank you.
@diesel250424 күн бұрын
What wheels are those?
@GlennsSpeedShop24 күн бұрын
kzread.info/dash/bejne/gYqdrZijY6jeZbA.html Same as these.
@darrellwampler388224 күн бұрын
That is very cool
@korbelkiller710624 күн бұрын
I got mine running real good but it sounds like The choke is on. I adjusted everything and it ran perfect. No problems then all the sudden it acted like it was running. Rich in smoking out the The exhaust like the choke is on
@GlennsSpeedShop24 күн бұрын
A couple thing are common.. . 1.. float level to high. 2.. and most likely... the needle and seat are not holding the fuel and the gas is overflowing into the engine. Check the oil level and make sure it is not over full. These engines do not like being overfull and has may be overfilling the oil level.
@korbelkiller710624 күн бұрын
Hate to ask since it's been so long since you've worked on it, but do you remember where you got your carbs from?
@GlennsSpeedShop24 күн бұрын
I always start on Amazon but their search engine is not great. If i cant find what i need easy, i switch to ebay.
@fish6480125 күн бұрын
Excellent video on deck. Appreciate your time. Hit a stump john deere, dealership wiuldnt attempt to fix and suggested deck replace at $1200. Will somehow pesuade back into shape. Knew inneed leverage of some sort. Didnt event think about ratchet strap. Again much appreciated
@rprug25 күн бұрын
Had a question not related to the painting. You said you put two carbs on the carts. How did you do that? I have a 96 Yamaha G16 and would love to do that to increase the HP of the engine
@GlennsSpeedShop24 күн бұрын
I put 2 on, one at a time. Sorry i confused you. Turned out my engine had issues too.
Пікірлер
dear glenn i watched with interest your video free ing up the stuck wheels on your lining tool. i want a lining tool but dont like the idea of paying almost the same price for postage as is the tool. i would very much lkike to buy the one that you have freed up i will give you what you want just name your price... cheers regards laurence from nottingham robin hood country !
Great to hear from you, i am not interested in selling it. We will be building a Gypsy Wagon / House Truck on the back of my 1936 Ford Truck one day and during the painting of it, having 2 striping tools will allow me to do 2 colors at a time. Thanks Glenn
4 minutes into the video before the review begins!
Holy cow what a turd bucket but if it cuts..... it cuts God bless ya man.
Clean scratches really well, fill with 2 part epoxy, sand flush. Clean very well, primer and paint!
Use an old refrigerator compressor for a vacuum pump , great for brakes, small engines and trans fluid change out.
when the oil is hot it works way better got many of these have not been under a car in years and done many oil changes
That turned out great!
I'm headed to Walmart in the morning for this stuff. I worked 5 hours today trying to remove rust on some older Cragar wheels using aluminum foil and Blaster (WD40 did nothing). My finger nails are black, my thumbs are sore and I have cramping in my hand!
Wow nice job. I hope it holds up
So far, so good .. i had a freind not recognize my car the other day , looks much better...
Please can you tell me which is the Diodes number D904 and resistance R 938 Thank you
Sorry...beyond my capabilities....
@GlennsSpeedShop it's Ok! Thank you for reply.
Thanks for reviewing our lift!!
Can you please recommend a good import AC/DC tig machine? Thank you
I am the wrong person to ask... So far i have not ventured into the world of TIG. One day hopefully. Glenn
If the shop had the broke lugs on the counter? Sounds like an overzealous guy on air the gun.
No... The owner went from factory hub centered wheels to aftermarket lug centered wheels, put on a heavy camper and pulled a trailer and broke a couple wheel studs. Fors superduty wheel studs are designed to hold the wheel to the hub, not support the weight of truck and overloaded cargo.
what Carburetor did you get? I have the same mower i would like to get running again.
Just an Amazon purchase. 12 to 15 bucks. Normally work well... Glenn
Hello Sir, I enjoy your content, and the education. Ive bought a 1998 Yamaha gas golf cart that needs new clutch. Can you give me your best estimate of what I should pay?? Please and Thank You.
Here is a link to a Drive and driven clutch kit with belt and removable tool. Subtract 200 bucks if you only replace the drive clutch. Good luck Glenn
Does the cover just pop off
What cover? I dont think any covers pop on or off. Its been 3 years. Want to buy it?
@@GlennsSpeedShop how much
900? Have clean title. Has not run after these videos. Is dirty and the front tire is flat. New battery still in the box.
Put the solar power through the regular input. the jump box might work as a charge controller
Nice man! I hope you got your money back from all that work. I considered this for a second but ill let my deck rust. haha. sheeeesh. I am however going to see if I can find another L100 mower for cheap in the area.
Dude… i was wondering how to get it off the back pulley! Thank you !
Perfect👍
I have a 90s Yamaha EF600 (500W/600W peak) and I have used the heck out of it since I got it in January 2017.
I have owned Yamaha Generators, and they are great machines. I did a few videos for an overseas generator company that used Yamaha engines for their generators. I'm not sure that the company survived the pandemic.
Do you think this model would fit in a short bed 2002 f250 crew cab?
The issue is keeping the weight center in front of the rear axle so... No. You will need to find a camper designed for your box size. If the center of the weight sits behind the rear axle it takes weight off the front axle. I have seen it done, but think of all the bad things that can happen.
@@GlennsSpeedShop thank you for your advice and time.
Clean install. 👍
Thanks 👍
looks like you found a real gem!
Im jealous as im looking for a complete hood for my LA 105 here in NB Canada As the last owner hit every tree on his property more than once and even busted the front axle Beer may have been involved too ? But it seems nobody on fleabay wants to ship one to Canada and im close to Maine ...go figure ill pay good money if anybody wants to ship me one COD ?
Good luck finding one, dont give up!
@@GlennsSpeedShop Thanks i may turn the hunt into a holiday if i can get a Canadian passport in less than a year ? Or just use the spray tan as those guys dont seem to need a passport ? I also want a 42 or 44 double stage snowblower for the winter So ill take a few bucks with me
That mullet shadow is epic
My Neighbor has one of these bought new 1998. I have serviced it since new. it has been a great mower. he cuts 3 acres at the house then drives it it a little ways over to his vacant lot to mow the frontage.
I know they are well built by JD, however they are not the same as any JD Model. They are unique!
I need a hood for one of them, i have 2554s model
I actually have a hood out back for one. Have to be sure it is the one you need. I am in Oregon and you can have it if your close enough
Very helpful in every aspect, thanks again for making this video
Looks good dude you do really good work 👍.
I got a free mower off a guy Destroyed the Flywheel I mean it was gone the Screen was literally inside the damn fly wheel they still used it and it blew up so i had a 20hp engine and I now got a 20hp La105 I dont know the hrs on the Engine I threw on it had to Make my own vaccum for the Fuel pump and ziptied the fuel pump to the oil dipstick it runs again Love it but Ik itsxa fake deere but Maintain your mower cause some may have loose screens and they will fall it idk how but they do gonna tear the engine down and see how bad the engine is and see if i can have a spare engine for another mower if I get one
Spare engines are good to have! If you have one, you will never need it! LOL Glenn
@GlennsSpeedShop I got 2 engines locked up so imma try to get them running
I really wish you made a video on the deck and how to properly adjust it, tips and tricks, etc. but I truly enjoy these old JD's
Nice job👍
I have a honda collection also . E40 . E300, E400, E500, E600, ,EX800,E900,EX1000,Eu1000 ,Eu2000 and EU2200, None smoke . 😊
Is the E40, a small 40 watt Honda Gen that was given to some Honda dealers by Honda? One was for sale recently around here..
@@GlennsSpeedShop They were sold with a small Sony tv also. It was in a kit
Is it possible I have a chevrolet motor with corvette engine #3731398 3749965 L12
I am not a GM Guy, but anything is possible.
Thank for telling me boyertown used Ford and chevy still trying to find vin # and find exact make and model
Good morning. Enjoyed the video. Just wondering what you would get or asking price for a machine like this ? Thank you and have a good day
I would get about $800 give or take 100 depending on condition. JDs are very easy to sell where i am
@@GlennsSpeedShop Hi. I did subscribe when i watched your video. Have watched a couple and forgot to but did now. Thank you. I have a john deere 160 and my favorite is my LX178. My wife just bought me a Piranha 44 deck from out of state for this machine. My LX178 does blow some smoke when starting it up and I believe the valve seals need to be replaced. Bought them and will get to them at some point-just a lot going on is all. I do need to remove the hood on this machine and I’m sure you know how those hoods are and with so much going on wondering if you did have a video on this so i don’t break anything? Thank you for getting back to me about my first question also. Looking forward to more videos. Thank you and have a good day
All the oil removal vids with single use products and the multitasker of brake clean and cat litter wins… I have both on hand already …😊
Good video I just found one exactly like that in the trash kind of knew what was wrong with it before I even got it on the workbench methanol poisoning soon as I took the bowl off of the carburetor it was full of the telltale corrosion that happens when people run Alcohol gasoline in them clean the carb and she started right up. I plan on ordering a new carburetor for it so it can be a reliable unit.
Score!
Where did you find vin please help
I have answered this before... As you walk in the side door, on the right just below the windshield. 2 tags. One from Boyertown and one from Ford.
Do you mean fron windshield or right side windshield
My motor is a chevy motor a cheroket motor would that be boyertown still possibly
@nicknino4615 yep... Boyertown used both ford and chevy
Where did you find vin I have one similar can't find it
Read the instructions. The liquid is supposed to seep at that joint.
Yep...
I would have put two server rack batteries in it or a crashed 48v hybrid battery and a PWM controller
Server rack batteries would never fit the space. I gave never seen a hybrid at 48 volts. When you buy rigs like this to fix and flip, its best to keep it simple and keep the cost down so you can make a profit and keep the next owner excited to own it.
Thank you.
What wheels are those?
kzread.info/dash/bejne/gYqdrZijY6jeZbA.html Same as these.
That is very cool
I got mine running real good but it sounds like The choke is on. I adjusted everything and it ran perfect. No problems then all the sudden it acted like it was running. Rich in smoking out the The exhaust like the choke is on
A couple thing are common.. . 1.. float level to high. 2.. and most likely... the needle and seat are not holding the fuel and the gas is overflowing into the engine. Check the oil level and make sure it is not over full. These engines do not like being overfull and has may be overfilling the oil level.
Hate to ask since it's been so long since you've worked on it, but do you remember where you got your carbs from?
I always start on Amazon but their search engine is not great. If i cant find what i need easy, i switch to ebay.
Excellent video on deck. Appreciate your time. Hit a stump john deere, dealership wiuldnt attempt to fix and suggested deck replace at $1200. Will somehow pesuade back into shape. Knew inneed leverage of some sort. Didnt event think about ratchet strap. Again much appreciated
Had a question not related to the painting. You said you put two carbs on the carts. How did you do that? I have a 96 Yamaha G16 and would love to do that to increase the HP of the engine
I put 2 on, one at a time. Sorry i confused you. Turned out my engine had issues too.