9:25 der Kerl schmeißt alles auf den Boden, damit er 9:35 das Zeug wieder aufheben kann.
@PkAllprocess1164 Жыл бұрын
Good work
@allulamatv9771 Жыл бұрын
Good
@allulamatv9771 Жыл бұрын
Good
@ii-es2sn Жыл бұрын
Looking at those heat cracks... As a sign of holding the weight of the vehicle on the clutch, that makes it over heat! Is a sign of bad driving habits.... Incorrect use of clutch and handbrake on hill starts etc.... Teaching drivers better driving skills would be a good start...👍👍
@Ed-rt9qt Жыл бұрын
Insane precision!😵
@hasanalemdar9205 Жыл бұрын
rot the crack surface 8-10 mm, adding a single piece of cast plate, screw and metal boiling
@drewmurray2583 Жыл бұрын
I think dropping parts on the cement and reusing cracked flywheels is lazy and dangerous. To each is to own.
@christosmakariou4574 Жыл бұрын
Where to get the Grinding wheel online? (part number?) The attachment that holds the grinding disk how much lateral play it has?
@user-hs7se7ks1d2 жыл бұрын
Мастера!!!
@user-vm8sb7nh2c2 жыл бұрын
запаять трещины в маховике локом, полный дибилизм.
@minkodima2 жыл бұрын
Торцова сіточка не явилась, ((( розходимось
@Lorand242 жыл бұрын
You dont weld a casted iron, it simply dont resist because of its molecular composition... I believe that you are trying to fix it, but that fix is just for a short period. With smaller and not even so deep cracks you scrap them..
@albionjq2 жыл бұрын
OMG working in the dirt with truck part and repairs , no effort to keep parts out of dirt
@jimsvideos72012 жыл бұрын
-Phasing- Facing
@blazeykk2 жыл бұрын
This cracked flywheel has only one place of installation - scrap yard.
@Horse552 жыл бұрын
These are cracks from local overheating, they will be anyway, and do not affect anywhere.
@Jonas_Aa2 жыл бұрын
In USA you call it scrap, in India we call it spare parts.
@theoldbigmoose2 жыл бұрын
That ol' clutch has been ridden hard, and put away hot! Nice pilot bearing...
@nct94662 жыл бұрын
Good try but man the ways you’re doing stuff not very good.
@mariusmarius99772 жыл бұрын
Scrap.
@davidsicca23522 жыл бұрын
Hey!!! Come back, do it again!! You missed a crack!!!
@happymann8392 жыл бұрын
💪💪💪💪💪👍👍👍👍👍
@frankierzucekjr2 жыл бұрын
Idk man, that thing looks like it's seen better days.
@Autophysn2 жыл бұрын
I don't know about that 🤔
@enla94692 жыл бұрын
👎👎👎👎👎
@thefreedomguyuk2 жыл бұрын
In my world, parts are cheap, labor is expensive. So we are doing the repair job correctly, and we're doing it only once.
@nct94662 жыл бұрын
Their theory isn’t correct..... Great attempts but......
@Chad93oleblue2 жыл бұрын
Worker-“ OSHA stopped by again today!!” Boss-“You tell them what I said” Worker-“ I did just as you said…told them THANK YOU COME AGAIN!”
@robertfeeley97382 жыл бұрын
Relax
@Jim_Wilks2 жыл бұрын
At least spell brake right!
@Daniel-hx7mk2 жыл бұрын
Amigo al rellenar con soldadura no se cierra por la parte de las estrías excelente acabado y rellenado felicidades bendiciones
@davidepittiglio85792 жыл бұрын
Looks like a bomb has gone off in the street
@dilawarhussain51672 жыл бұрын
NAIC
@reinanaquino49382 жыл бұрын
Bacana os caras são ninja
@ozz53502 жыл бұрын
👍👏👏👏
@ozz53502 жыл бұрын
👍👏👏👏
@ozz53502 жыл бұрын
👍👏👏👏
@ozz53502 жыл бұрын
👍👏👏👏
@krisbrzezina22892 жыл бұрын
Another shitey repair by the men in safety flip flops
Пікірлер
Nice cleaning.. Please always put cleaning video
Perfect cleaning.
InShot to Daleeet karts
Vary good
Nic
9:25 der Kerl schmeißt alles auf den Boden, damit er 9:35 das Zeug wieder aufheben kann.
Good work
Good
Good
Looking at those heat cracks... As a sign of holding the weight of the vehicle on the clutch, that makes it over heat! Is a sign of bad driving habits.... Incorrect use of clutch and handbrake on hill starts etc.... Teaching drivers better driving skills would be a good start...👍👍
Insane precision!😵
rot the crack surface 8-10 mm, adding a single piece of cast plate, screw and metal boiling
I think dropping parts on the cement and reusing cracked flywheels is lazy and dangerous. To each is to own.
Where to get the Grinding wheel online? (part number?) The attachment that holds the grinding disk how much lateral play it has?
Мастера!!!
запаять трещины в маховике локом, полный дибилизм.
Торцова сіточка не явилась, ((( розходимось
You dont weld a casted iron, it simply dont resist because of its molecular composition... I believe that you are trying to fix it, but that fix is just for a short period. With smaller and not even so deep cracks you scrap them..
OMG working in the dirt with truck part and repairs , no effort to keep parts out of dirt
-Phasing- Facing
This cracked flywheel has only one place of installation - scrap yard.
These are cracks from local overheating, they will be anyway, and do not affect anywhere.
In USA you call it scrap, in India we call it spare parts.
That ol' clutch has been ridden hard, and put away hot! Nice pilot bearing...
Good try but man the ways you’re doing stuff not very good.
Scrap.
Hey!!! Come back, do it again!! You missed a crack!!!
💪💪💪💪💪👍👍👍👍👍
Idk man, that thing looks like it's seen better days.
I don't know about that 🤔
👎👎👎👎👎
In my world, parts are cheap, labor is expensive. So we are doing the repair job correctly, and we're doing it only once.
Their theory isn’t correct..... Great attempts but......
Worker-“ OSHA stopped by again today!!” Boss-“You tell them what I said” Worker-“ I did just as you said…told them THANK YOU COME AGAIN!”
Relax
At least spell brake right!
Amigo al rellenar con soldadura no se cierra por la parte de las estrías excelente acabado y rellenado felicidades bendiciones
Looks like a bomb has gone off in the street
NAIC
Bacana os caras são ninja
👍👏👏👏
👍👏👏👏
👍👏👏👏
👍👏👏👏
Another shitey repair by the men in safety flip flops