Watch Erik struggle so you don't have to! Lots of HOW TO, Tool and Product reviews, fun ROADTRIPS, and more!!! GET MERCH HERE: godspeedgaragemerch.bigcartel.com
Are all pistons clocked the same? Or is it opposite for passenger side pistons?
@johnflanders19523 күн бұрын
How long can you do this prior to start up? I mean can you do this a month before start up and let it sit or does it need to be done just before start up? Thanks
@ms49536 күн бұрын
Thanks man this really helped me tune my carb
@joelowery35948 күн бұрын
bro building a 1985 ss 350/700r4 we found a hot wire for for excesseries 30 amp coming from fuse block we taped into always hot running down there when key is on we was told trans was one wire at factory plug ..and grounded can i wire it threw the brake lights like you did in your truck please help thank u
@rixsglh10 күн бұрын
Great video
@metroe213812 күн бұрын
Can this be the same concept as fixing the main seal leak from my 1984 Buick Regal?
@woods70212 күн бұрын
Howmuch oil do i use with this still the 6qt?
@Testing-12316 күн бұрын
Finally! A how-to video on this subject that makes perfect sense
@WOTSmallengines16 күн бұрын
What bracket would I use for the JEGS stainless steel cable, and a TBI?
@87square5819 күн бұрын
My inner tie rods won't seat in any tips to get them in?
@505fastlife620 күн бұрын
Do all transmissions have a bushing like that?
@j-ridecustoms21 күн бұрын
Thanks so much for sharing
@OGLowKeySeven22 күн бұрын
Good video.
@38Chev57223 күн бұрын
I hope you a just driving around and are well. I need to see more videos from you, as I really enjoy them. Cheers!
@josiahmustapha866423 күн бұрын
you should whitewall your wheelchair
@LoneWolfSnowplowing25 күн бұрын
I used Eastwood rust encapsulator on my plow/salt truck. Didn't last long. I then used Eastwood Rust Encapsulator Platinum and it has held up great.
@phillipthethird4226 күн бұрын
I'm watching this because I found a 700R4 and don't know anything about it, nor, have I ever had one before. I do plan to use it , but I want to know as much about it as I can learn before I do use it. I'm hoping you can help me identify which one I have because the ID numbers are missing. If you are interested in helping me, let me know and I'll make a short video on it and perhaps you can help. Let me know, OK?
@johnny535is27 күн бұрын
Really enjoy your videos. Thanks for sharing
@GeminiGlass27 күн бұрын
Great video, brother. I do have one question. The edelbrock carburetor that I purchased, the electric choke didn't come with a baffle plate. Does that make a difference on how the choke operates. Cause i'm having a hell of a time getting this 460 going.
@rustybumperclassics634227 күн бұрын
Good video
@bena229328 күн бұрын
Thanks Bro, Great Job love all the Tricks makes it so Easy when you see how it is done. So Cool.
@frankkennedy5361Ай бұрын
Concise and clear, with excellent advice. Thanks for posting. Will be tackling my leak soon, armed with this know-how.
@flatblackhair1Ай бұрын
Great video
@thetruthisoutthereytАй бұрын
Thank you.
@phillp547Ай бұрын
How do i know what to remove off mine for a swap
@jeffsedlick2978Ай бұрын
I have to look at this cable now. When I give it extra gas and my rpms increase suddenly, it feels like the truck overrevs and stalls for a brief second or goes straight into overdrive. This video will get me started. Thank you sir.
@joshuacruz3119Ай бұрын
“Pets heads are falling off” lol. Thanks for the video man helped out a lot.
@timgibson2070Ай бұрын
You're an inspiration to me buddy. I have a f@#$ed up back and have been working on my cars, abd trucks since 15 years old "45 now" but back pain limits me that I can't do it as much as I'd like. I'm not rich "well with money that is" so save as much as I can to pay people/ friends to help me get stuff done. Seeing your videos and you not letting it stop you motivates me brother......Hell Yeah!
@joselouruАй бұрын
My only advise would be to put a little silicone around on the outside cover , it will leak from the cover after awhile The metal is old
@xiong2mouaАй бұрын
Chinese made stuff is better and cheaper than what we can make it for in the U.S. I have been in the field of manufacturing for 2 decades. In the past, I paid both countries to make the same part with the same drawing. The U.S part cost 10x more. I couldn't tell the difference between the two in comparison. If I paid 25% more in China and tightened up the tolerances, I would still be able to cut costs.
@ericruvalcaba933Ай бұрын
Very nice! Thanks bro! Really helps with my 59 Apache Truck cluster.
@dalezaugg7742Ай бұрын
What happened to the Fatman Mustang II front suspension?
@FabriceClosierАй бұрын
Sniper installed in 2017. Went thru same issues, and what fixed all was to remove the fuel regulator and install a 32buxx external one. No more issues. Turns out the cheapo thing was randomly defining pressure. Now got a perfect steady 59.5 psi at all rpm. While using the original was ranging from mid 60 to high 70’s. Also a modified mazda o2 sensor spacer ( enlarged the tip to reveal the sensor fully) made the AFR readings more stabile. Now no more over rich mix or hesitations or anything. It finally runs at it should have for years.
@dasturm7504Ай бұрын
No offense was not expecting the wheel chair 😅 i was wondering why you had your hands up earlier like "what would you be doing with your hands to affect idle".. anyways thank you for the video it helped a lot
@motionsickАй бұрын
Thank you.
@13strikeasnareАй бұрын
Bad or just dirty I.a.c.
@johnny0454Ай бұрын
You should have added it to the flat side of the pan (horizontally, instead of vertically) it'll drain more of the fluid out also if you put it as low as it can go. There is a flat part on the verticle side of the pan near where you drilled, between the solenoids. Also it wouldn't be as likely to get hit, brocken, or knocked off if it's coming out of the side of the pan rather than hanging straight down.
@mikefish2445Ай бұрын
What paint did u use vinyl fabric?
@stanleymorton2992Ай бұрын
Stick wit carb. Save that 2 grand plus
@FoolPullDieselАй бұрын
Comment, Liked, Subscribed!!! Thanks so freaking much for that video!!! Finally explained and Understood!!!!!! Thanks!!!!!!
@kasems1536Ай бұрын
Thank so much, from Bangkok.,,,,,
@Matt-kt9nmАй бұрын
There is a widespread misunderstanding of this cable. Making a used 700r4 transmission a longshot.
@hovlandboundАй бұрын
Great video. Thanks so much. I will put your tips to use tomorrow! Wish me luck :)
@DeeDagoАй бұрын
Do u have any info om how to address slop in the steering wheel. My car drives but has some slop in it. Is there a way to adjust or tighten the sterrimg gear box? Thanks
@RyanBeall-zi4kuАй бұрын
Man I wish your video popped up sooner on my search results. I went through so many garbage videos before this one. Thanks for making it man, it makes all the difference when you're doing stuff like this for the first time. Very informative and easy to follow along. Thanks again buddy.
@azarahwagner27492 ай бұрын
What actually still works is red oxide paint/ primer. Then use chassis paint over it. All rust encapsulation finishes are not UV resistant . And too many use it on improperly prepared surfaces. If you can tap the metal and huge chunks fall off it all needs removing. Another tip ( not degassing) is to heat up the metal enough to remove moisture .
@mr.moparhemi41342 ай бұрын
Awesome video🙌 very informative! 👍 I inherited my father's 70 Jaguar XKE with an LT1 and had a turbo 400 with a B&M shift kit, used to bark the tires when you hit second🤗 but then he swap that out and wanted it more streetable as you did and put a 700 R4, but now it shifts as if the tranny is slipping? I will try and adjust it.. hopefully that is the problem.🤞🤞 Thanks for the great video. 🙌👍🙌
@thinetaco37222 ай бұрын
Should I add a fuse to the battery wire before the relay, or is that not needed?
Пікірлер
🔥
We need another series bro!!
Are all pistons clocked the same? Or is it opposite for passenger side pistons?
How long can you do this prior to start up? I mean can you do this a month before start up and let it sit or does it need to be done just before start up? Thanks
Thanks man this really helped me tune my carb
bro building a 1985 ss 350/700r4 we found a hot wire for for excesseries 30 amp coming from fuse block we taped into always hot running down there when key is on we was told trans was one wire at factory plug ..and grounded can i wire it threw the brake lights like you did in your truck please help thank u
Great video
Can this be the same concept as fixing the main seal leak from my 1984 Buick Regal?
Howmuch oil do i use with this still the 6qt?
Finally! A how-to video on this subject that makes perfect sense
What bracket would I use for the JEGS stainless steel cable, and a TBI?
My inner tie rods won't seat in any tips to get them in?
Do all transmissions have a bushing like that?
Thanks so much for sharing
Good video.
I hope you a just driving around and are well. I need to see more videos from you, as I really enjoy them. Cheers!
you should whitewall your wheelchair
I used Eastwood rust encapsulator on my plow/salt truck. Didn't last long. I then used Eastwood Rust Encapsulator Platinum and it has held up great.
I'm watching this because I found a 700R4 and don't know anything about it, nor, have I ever had one before. I do plan to use it , but I want to know as much about it as I can learn before I do use it. I'm hoping you can help me identify which one I have because the ID numbers are missing. If you are interested in helping me, let me know and I'll make a short video on it and perhaps you can help. Let me know, OK?
Really enjoy your videos. Thanks for sharing
Great video, brother. I do have one question. The edelbrock carburetor that I purchased, the electric choke didn't come with a baffle plate. Does that make a difference on how the choke operates. Cause i'm having a hell of a time getting this 460 going.
Good video
Thanks Bro, Great Job love all the Tricks makes it so Easy when you see how it is done. So Cool.
Concise and clear, with excellent advice. Thanks for posting. Will be tackling my leak soon, armed with this know-how.
Great video
Thank you.
How do i know what to remove off mine for a swap
I have to look at this cable now. When I give it extra gas and my rpms increase suddenly, it feels like the truck overrevs and stalls for a brief second or goes straight into overdrive. This video will get me started. Thank you sir.
“Pets heads are falling off” lol. Thanks for the video man helped out a lot.
You're an inspiration to me buddy. I have a f@#$ed up back and have been working on my cars, abd trucks since 15 years old "45 now" but back pain limits me that I can't do it as much as I'd like. I'm not rich "well with money that is" so save as much as I can to pay people/ friends to help me get stuff done. Seeing your videos and you not letting it stop you motivates me brother......Hell Yeah!
My only advise would be to put a little silicone around on the outside cover , it will leak from the cover after awhile The metal is old
Chinese made stuff is better and cheaper than what we can make it for in the U.S. I have been in the field of manufacturing for 2 decades. In the past, I paid both countries to make the same part with the same drawing. The U.S part cost 10x more. I couldn't tell the difference between the two in comparison. If I paid 25% more in China and tightened up the tolerances, I would still be able to cut costs.
Very nice! Thanks bro! Really helps with my 59 Apache Truck cluster.
What happened to the Fatman Mustang II front suspension?
Sniper installed in 2017. Went thru same issues, and what fixed all was to remove the fuel regulator and install a 32buxx external one. No more issues. Turns out the cheapo thing was randomly defining pressure. Now got a perfect steady 59.5 psi at all rpm. While using the original was ranging from mid 60 to high 70’s. Also a modified mazda o2 sensor spacer ( enlarged the tip to reveal the sensor fully) made the AFR readings more stabile. Now no more over rich mix or hesitations or anything. It finally runs at it should have for years.
No offense was not expecting the wheel chair 😅 i was wondering why you had your hands up earlier like "what would you be doing with your hands to affect idle".. anyways thank you for the video it helped a lot
Thank you.
Bad or just dirty I.a.c.
You should have added it to the flat side of the pan (horizontally, instead of vertically) it'll drain more of the fluid out also if you put it as low as it can go. There is a flat part on the verticle side of the pan near where you drilled, between the solenoids. Also it wouldn't be as likely to get hit, brocken, or knocked off if it's coming out of the side of the pan rather than hanging straight down.
What paint did u use vinyl fabric?
Stick wit carb. Save that 2 grand plus
Comment, Liked, Subscribed!!! Thanks so freaking much for that video!!! Finally explained and Understood!!!!!! Thanks!!!!!!
Thank so much, from Bangkok.,,,,,
There is a widespread misunderstanding of this cable. Making a used 700r4 transmission a longshot.
Great video. Thanks so much. I will put your tips to use tomorrow! Wish me luck :)
Do u have any info om how to address slop in the steering wheel. My car drives but has some slop in it. Is there a way to adjust or tighten the sterrimg gear box? Thanks
Man I wish your video popped up sooner on my search results. I went through so many garbage videos before this one. Thanks for making it man, it makes all the difference when you're doing stuff like this for the first time. Very informative and easy to follow along. Thanks again buddy.
What actually still works is red oxide paint/ primer. Then use chassis paint over it. All rust encapsulation finishes are not UV resistant . And too many use it on improperly prepared surfaces. If you can tap the metal and huge chunks fall off it all needs removing. Another tip ( not degassing) is to heat up the metal enough to remove moisture .
Awesome video🙌 very informative! 👍 I inherited my father's 70 Jaguar XKE with an LT1 and had a turbo 400 with a B&M shift kit, used to bark the tires when you hit second🤗 but then he swap that out and wanted it more streetable as you did and put a 700 R4, but now it shifts as if the tranny is slipping? I will try and adjust it.. hopefully that is the problem.🤞🤞 Thanks for the great video. 🙌👍🙌
Should I add a fuse to the battery wire before the relay, or is that not needed?