Пікірлер

• 
  @dinosworkinonit35632 күн бұрын

  You are missing a belt guard/guide that goes around the drive pulley that serves 2 functions. it prevents the drive belt from grabbing the pulley while the clutch/brake is applied making for easier and smoother shifting. The other is obviously to keep the drive belt from popping off the pulley. The belt guard also has 2 studs where a pulley cover is able to mount to.

• 
  @RuffPlay2 күн бұрын

  I've already picked one up. 👍 But Thanks for looking out for me.

• 
  @asellers623 күн бұрын

  Good work. Nice video. But the SIM card I used isn’t supported. Now I’ve to get a new card.

• 
  @RuffPlay3 күн бұрын

  Ahh. Crap. I'm sorry about that

• 
  @Spiderking2477 күн бұрын

  Lovely

• 
  @wtbm12311 күн бұрын

  Both are good tractors

• 
  @wtbm12311 күн бұрын

  Mower deck is supposed to run off the big pulley , the small one will not give you enough blade speed to cut well. . I think i remember you asking in the sears group. They are good tractors . Just mowed with mine yesturday.

• 
  @RuffPlay10 күн бұрын

  That's good to know. Thanks 👍

• 
  @PIPERBOYWILLIAMS12 күн бұрын

  No one wants to modify anything

• 
  @spiderking2013 күн бұрын

  I love my widows!❤❤❤❤❤

• 
  @l.b.754315 күн бұрын

  My pride and joy is a John Deere

• 
  @dougalexander720416 күн бұрын

  Bad thing about cleaning up vintage equipment is that the termites quit holding hands.

• 
  @grahammedlock309416 күн бұрын

  Very cool old rider!! It has a great look that the new mowers don't have. I use about 3 tablespoons of Dawn dish soap in a Zep spray bottle and let it soak for about 15 minutes. Then hit it with the pressure washer. Alway's fun seeing the before and after. Great video.

• 
  @comoelitamelendez846716 күн бұрын

  Would love to know how you set up the pump flowing out of the canister...i know there is a pump but you hid really well! VERY NICE PROJECT! We will be working on ours soon! Do you think I can put this on a 4in rebar concrete slab or better off sitting it on the ground under some gravel? Thank you! Just an amateur DIYer here. :)

• 
  @cleverjoe21 күн бұрын

  That's one bad ass tiller. Minus the ass. :) Thanks for sharing.

• 
  @caseylee335023 күн бұрын

  Mine does the same thing once in a while! 32' odyssey G7 samsung! Problem is "with mine" it overheats once I removed the back cable management cover, it seems 👍 good but I also put a small fan behind it

• 
  @Brians201929 күн бұрын

  Cool, what the heck is it though?

• 
  @stormywthr1Ай бұрын

  Such a cool setup❤

• 
  @nateitscake88Ай бұрын

  Dontou have a hobie? I have a scenario base question for you if you don't mind giving me your thoughts. I have a ladder racker wide enough to fit 4 hobies on it, but they will be secured on their sides using a T Slot J-Style Kayak Carrier. Do you think these things are gonna crack being on their side while driving down the highway? I mean they're gonna be secured and padded with foam... Just wondering if they can handle slight stress mounted on the side.

• 
  @fraudsarentfriends4717Ай бұрын

  You need to rake the rocks out of the area first. The tiller will bring more to the surface. It's no different with a gas tiller. Seems an education in gardening is what's needed here.

• 
  @harleyquintin6974Ай бұрын

  What the hell do you expect out of something designed for light dirt ,not a gravel pit . Lol

• 
  @jasonstillwell3072 ай бұрын

  Perfect video. Great tip at the end by the way. Not all heroes wear capes! Thanks.

• 
  @randomclown57242 ай бұрын

  Thanks. This is exactly the video I was looking for. I have the exact same racks (from Amazon though) and will be loading 2 kayaks for the first time (done a single before). Thanks again, have a great day

• 
  @ktriebol2 ай бұрын

  What do you have the center-to-center spacing set for the crossbars?

• 
  @alrafirifat6042 ай бұрын

  Why are shaking are you alright

• 
  @johnroehsler64402 ай бұрын

  This man is very stupid. Tillers are not made for tilling rocks. I love my Son Joe Tiller and pole saw. This guy should not make videos advertising how stupid he is.

• 
  @trystanfeller2 ай бұрын

  What kind of battery is it, or does the kit come with it already? Anyways sick bike dude have fun and have a nice day!

• 
  @RuffPlay2 ай бұрын

  48v 20ah Shark

• 
  @Creamed_Corn3 ай бұрын

  imagine getting this to work with todays hardware ☹️

• 
  @brettbrown63443 ай бұрын

  Thank you for showing this!

• 
  @andypre16673 ай бұрын

  Nice Astro! The Service AWD light with the clicking relay near your left foot usually means that the actuator motor for 4WD has an issue. There is a way to rebuild it. Someone on the Astro Safari Forum did a nice writeup. You could also be low on transfer case fluid. Use only the blue GM Auto Trak II fluid (or an equivalent), ATF/differential fluid does NOT do the trick! And nice on the bench! "Unfortunately" I have second row captains chairs (bolt in) and the rear row with the option to individually recline the outside seats. While more luxurious, the standard bench seats seem to be more practical. Edit: Until you fix the AWD actuator motor issue, you essentially only have RWD. Just make sure there is enough fluid in the case until you get around to fixing it.

• 
  @suavelifestyle90943 ай бұрын

  What about a 12 ft kayak that weighs like 90lbs

• 
  @plamenstoyanov944 ай бұрын

  And you claim you can cook, let alone "better than any restaurant". 😅

• 
  @RuffPlay4 ай бұрын

  Maybe I should of said "better than any restaurant around here". Honestly, come to Westminster MD and try to find a steak or seafood dinner that taste good.

• 
  @cathymoore58904 ай бұрын

  Dave here - looking good - 😂 sorry to say - I've been doing this for 35 plus years - and different flavors no salty taste -boiled 23 Min- cooled - then grilled or oven baked - as I said- looking good! ! !😮🎉

• 
  @RuffPlay4 ай бұрын

  So how much salt did you use?

• 
  @AstroVanTribe4 ай бұрын

  Hey man, got your FB note - Yep, Mine is an '04, as well.... If you want to keep it, address that rust first thing - Really look into them "frame rails" under the unibody of the undercarriage because if they're too far gone it's going to be a real job. Rip that tow hitch off, cancer migrates. If you can get rid of the rust and seal it up with some paint/product then it'll be worth pumping money into it. I can see you oil pan is resting on the front axle shaft - Do your lift then contact Dave about the engine lift Brackets - Do a body lift up front and some s10 springs on the rear then adjust for ride height. I pretty much replaced everything and only have a few things left to replace at this point... Keep in mind on my videos, I did many things more than once because I kept learning so if you watch an older video on a particular subject you'll want to search to see the latest video on the same subject as I may have upgraded or changed my mind... Good luck

• 
  @RuffPlay4 ай бұрын

  Thanks for the advice. I believe I've watched all your Astro videos at least once at this point, sometimes twice for some. As far as rust goes. I'm just waiting on some stripping disc's to come in the mail to start the project. It should go pretty smoothly since I only found one little spot that needs a weld. There's also an Astro enthusiast close by who sells body reinforcement kits. So no worries, all is good. Thanks Mike, take it easy 👍

• 
  @isaacemmanuel32765 ай бұрын

  I just bought that monitor a week ago, and I can confirm that without calibration, it looks very bad. The color temperature was also not pleasant, but after a day adjusting the parameters, I was able to achieve better contrast and a higher level of detail in general. On the monitor: In the "Gaming Intelligence" section, leave everything on Off or Auto. In the "Gaming" and "Game Mode" section, select the "RTS" mode, I would leave the response time on Fast and the adaptive sync On, leave everything else on Off. In the "Professional" and "Pro mode" sections, select "User" mode, I would leave everything else Off. In the "Image" section, the contrast should be at 70, the sharpness at 0, the color temperature at "Custom" and have the following values: R-80, G-80, and B-100. If you consider that the image is very cold, you can increase the red values, but this is at your discretion. You can adjust the brightness to your liking, it should not affect the color of the image but a lower level can contribute to an image with less bleeding and more detail in brightly lit areas. I would recommend leaving it at 50%. I combined this together with more settings in the Nvidia control panel: (I don't know what options could help on Radeon cards, sorry :( ) First in "change resolution" use Nvidia's color settings and change the output color depth to 10 Bit. Then in "Adjust color settings" lower the brightness to 47%, increase the contrast to 60% and the gamma to 1.15. Finally I raised the digital vibrance a little, to 55%. With this, the screen shows more vivid colors, with better contrast, a greater level of detail in the shadows and with a less warm color temperature. No monitor is identical to another, these settings worked for me but they may not work for everyone, so you can play with these parameters to leave the image to your liking.

• 
  @romain_21375 ай бұрын

  can you control the fans individually?

• 
  @SS-TX5 ай бұрын

  Hello.. How did you wired up the power button, was it through the motherboard; or you wired into the power supply directly?

• 
  @RuffPlay5 ай бұрын

  On the board

• 
  @murdrox_876 ай бұрын

  It's still there and i've alwys had it off :(

• 
  @patrickbaker61406 ай бұрын

  Maybe you shouldn’t till rocks with an electric tiller . 🙄

• 
  @RuffPlay6 ай бұрын

  What's the alternative?

• 
  @patrickbaker61406 ай бұрын

  @@RuffPlay a gas tiller with power

• 
  @RuffPlay6 ай бұрын

  @@patrickbaker6140 it did the job plus some. For a lot less than a gas tiller.

• 
  @MT-07-Rookie6 ай бұрын

  u have MAG 341QR not MAG 342CQR wtf?

• 
  @RuffPlay6 ай бұрын

  Wow, you're right. Thanks for pointing it out

• 
  @jamesgretsch48946 ай бұрын

  You may be better off with an auger from Harbor Freight. Its gas operated.

• 
  @RuffPlay6 ай бұрын

  Nah, this little SunJoe did the job plus some before it broke. I was pleased with the results 😀

• 
  @gun_gaming16666 ай бұрын

  I know you didnt ask but mine has that too. But for some reason it makes me worse 😅

• 
  @BadgerAviation7 ай бұрын

  what program?

• 
  @alexwilson84297 ай бұрын

  Activision needs to know Abt this before warzone drops

• 
  @cardengixoth68787 ай бұрын

  Holy shit, that's fucking awesome! I'm definitely gonna get that monitor when I build my rig. It's a 4K monitor, right? Not necessary, just curious.

• 
  @RuffPlay7 ай бұрын

  Ultrawide 1440p. I don't recommend anyone buy it. It's a pretty awful ips monitor.

• 
  @drowsyvaughn7 ай бұрын

  crosshair v2 and hudsight both do similar things for way less money the monitor isnt very good, id just use a program edit: correction

• 
  @cardengixoth68787 ай бұрын

  @@RuffPlay Ultrawide is what kills it for me. I'm fine with a 1440p resolution. I just can't do that stupid ass ultrawide crap. Just get 2 monitors. Like... what? But my eyes aren't all they used to be, and I can't pick out a white crosshair, on a white texture, on a 240p screen anymore, so the contrasting colors would really, really help, ya know?

• 
  @PokeMikPro7 ай бұрын

  oh wow go return it bro or ask them for a new one for free

• 
  @willywilzs8 ай бұрын

  My nut is rusted and rounded off any suggestions cause I can't even get the shaft out due to this

• 
  @JMitsy7828 ай бұрын

  I thought he said “murder cyclist” had to rewatch lol. but no it’s definitely not a motor bike.

• 
  @Bobbylong978 ай бұрын

  Lmao obviously you have know idea there's a big difference between your little bicycle and a actually motorcycle going over the grass

• 
  @user-tn4uj4mz3e8 ай бұрын

  bro, it’s a bike

• 
  @zacholiver14608 ай бұрын

  Turn in it at 55-60mph big guy

• 
  @GageProllyRacingN6118 ай бұрын

  Motorcyclist?!?😭stupid ahh

• 
  @user-hv2jz3my3y8 ай бұрын

  True bro