Пікірлер

• 
  @ST1VO6 күн бұрын

  Useless esc's, even with the programming card... Got mine working the best I could, still not much punch, then it'd keep slowing down as too hot (2s and 6.5t in 2wd buggy) then it stopped working alltogether.... just get a quicrun 120 g2 for £35

• 
  @janimaatta988919 күн бұрын

  Onko sulla mikä kattoteline tässä? Istuu hyvin.

• 
  @philRminiatures28 күн бұрын

  SUperb dioram, great attention to detail on the base...

• 
  @willshobbytime28 күн бұрын

  Thanks for the nice comments Phil. I have to say that I liked doing the rugged forest terrain. In retrospect, I can say that the base should have been layered even more, especially on the edges of brown terrain and green moss. But otherwise I'm quite happy and the 1/72 scale seems to be quite forgiving, especially for trees. Thanks for watching :)

• 
  @chrisdomeier4985Ай бұрын

  What option does stop the cogging?

• 
  @philRminiatures2 ай бұрын

  Very nicely done, great job!

• 
  @willshobbytime2 ай бұрын

  Thanks for the nice comments and for watching🙂

• 
  @user-kf3qz3hj5f2 ай бұрын

  - I spent many, many days/eves. working on my (GS02F) Blazer style body, only to have it "do the exact same," paint-flaking, off of the 0.040" inch [ body thickness ]. Plus, my 1st run, my body split by the head-light area, cuz I (during body-prep), slipped with the razor-blade, cutting the lowest part of the "front" of this body !! 🙄 Be very careful people, when cutting-out your Lexan bodies !!!! 👌

• 
  @user-kf3qz3hj5f2 ай бұрын

  - Well done "prep & paint video" !!! ...I love my Gmade (GS02F), it is THE BEST "forward weight-bias" RC Crawler available, besides the NEW Vanquish "VRD STANCE" !!!! ...I think the VRD "might" take/beat my GS02F, which is an ongoing customized rig !!! - I swear by this specific Gmade !! It will climb a flat board of (64°) incline, "up" my carpet-ed ramp !!! ...No other brand has been able to accomplish this on KZread, that I have seen. 👍✌️ - Thx for the vid

• 
  @goforitpainting3 ай бұрын

  Cool diorama 👍

• 
  @willshobbytime3 ай бұрын

  Thanks for watching😊

• 
  @guustvandijck93903 ай бұрын

  Awesome! What saw are you using?

• 
  @willshobbytime3 ай бұрын

  Thanks :D In the beginning i use hotwire cutter PROXXON Thermocut 230/E

• 
  @philRminiatures3 ай бұрын

  Superb winter atmosphere!

• 
  @willshobbytime3 ай бұрын

  Thank you🙂

• 
  @cerisekappes5804 ай бұрын

  Beautifully crafted 😊

• 
  @willshobbytime4 ай бұрын

  Thank you for the nice comment😊

• 
  @cerisekappes5804 ай бұрын

  @@willshobbytime you are very welcome 😊

• 
  @PaulSchryer4 ай бұрын

  ...Not "a Jeep"... 🙄 - Gotta love the badass Gmade (GS02F) though. 💯

• 
  @PaulSchryer4 ай бұрын

  **"Proof is in the Muddin' !!!!"** 🤘😜👌 - "Does anyone else see how fkn amazing this Gmade (GS02F) "IS"...!!!!?? 💯 🤔 ...Way better in looks & performance, than the TRX4, or all Vanquish rigs, except now, maybe the VRD Carbon... ...will hold its own against this... ..."overly under-rated"... Bad A$$ highly efficient forward bias crawler/scale-truck...🤔 ...And ir doesn't matter "what any-one thinks," cuz it is a proven FACT. - I'm a witness"for sure". I own this version, and there is "No Denying It". 💯🔥 - Most out of the box capable, no fkn lies. 👍

• 
  @Theonetruemason4 ай бұрын

  looks great

• 
  @willshobbytime4 ай бұрын

  Thank you😊

• 
  @detlevwalter74954 ай бұрын

  Great idea with the smoke and the fire. very well done. 👍😉

• 
  @willshobbytime4 ай бұрын

  Thank you😊

• 
  @elmarcentral5 ай бұрын

  Are you Finnish or Estonian?

• 
  @willshobbytime5 ай бұрын

  Finnish

• 
  @zoridor165 ай бұрын

  😮😮😮😮 amazing Kyosho machine❤❤ (easy to get spare parts and gears for this in 2024?) 😮

• 
  @willshobbytime5 ай бұрын

  Extremely difficult to get spareparts these days😔

• 
  @zoridor165 ай бұрын

  @@willshobbytime maybe in ebay :) (fazer mk2 many compatible pieces)

• 
  @simonrimes35676 ай бұрын

  Hey mate any special tips for hooking up the esc programming card ? Mine just strobes

• 
  @willshobbytime6 ай бұрын

  Sorry mate i have no idea. Hope you get that problem sorted out!

• 
  @Felix-gv3su4 ай бұрын

  have you got a reason for the problem? Because i have the same with both of my escs and Programm cards@@willshobbytime

• 
  @Celina_books6 ай бұрын

  Fajna plaża

• 
  @Adubbs876 ай бұрын

  Awesome video Brother! I’ve been in the hobby for a long time but I’ve never got into crawling. Would you be able to recommend me like a good budget trail truck/crawler 1/10 scale?

• 
  @willshobbytime6 ай бұрын

  Unfortunately, I have no experience with budget class crawlers other than WPL and a one other chinese manufacturer, and honestly, I can't recommend them to others. Axial and Gmade have not disappointed. straight out of the box both are great trail crawlers. Gmade a little lighter works a bit better on rocks (axial is bit more top heavy and heavier overall)

• 
  @Adubbs876 ай бұрын

  What battery does it run up to?? 4s?6s? Have you ran 6s successfully? Or 4s?

• 
  @willshobbytime6 ай бұрын

  I've only driven 3s and it's capable up to 4s

• 
  @Adubbs876 ай бұрын

  @@willshobbytime nice. Have you had any issues with it?

• 
  @TheSphongleface3 ай бұрын

  I have the exact same thing and it says 2S only.

• 
  @darrenpaterson67926 ай бұрын

  this is cool mate, you've inspired me to make a 3d printed one similar. 😀

• 
  @willshobbytime6 ай бұрын

  That's awesone idea mate😀and thanks for watching!

• 
  @lgdesigners80356 ай бұрын

  I think it looks better with the blur effect, especially in those photos with the room lights off :)

• 
  @lgdesigners80356 ай бұрын

  Nice diorama! I love the concept, and the execution! I haven’t made any dioramas yet, but I want to , do you have any recommendations for a good starter project? I don’t have a 3D printer or I would make one like this!

• 
  @willshobbytime6 ай бұрын

  Good question, unfortunately I can't really advise on a specific starting diorama. But if you're interested in sci-fi, I'd recommend researching the Star Wars theme, there's a lot of material ready for that topic, for example Star Wars Legion figure sets that can be really fun to paint. You can make a nice battle diorama with them. I hope this helped little and thanks for watching and commenting 🙂

• 
  @lgdesigners80356 ай бұрын

  That helps, thank you!

• 
  @chrisbaztird6 ай бұрын

  That's pretty impressive, unfortunately I do not have a 3d printer and don't know of anywhere that could print it for me.

• 
  @stralegaming25977 ай бұрын

  A small detail you could add is smoke behind the helicopter bending down, because of how much the blades push it, very nice work

• 
  @willshobbytime7 ай бұрын

  That's a good suggestion, thanks for liking and commenting kindly :)

• 
  @ramkaer11 ай бұрын

  That came out amazing. Nice job, thanks for sharing. 👍

• 
  @willshobbytime11 ай бұрын

  Thank you for watching and your kind comment!

• 
  @user-mq5oi1yr7l11 ай бұрын

  Very nice body 🙏🙏🙏 Your hand. Magic👍👍👍

• 
  @willshobbytime11 ай бұрын

  Thank you! it was hard work, but that's usually the case. Thank you for watching!

• 
  @RCGaryCrawlerTV11 ай бұрын

  *GREAT* gmade 🇷.🇨

• 
  @willshobbytime11 ай бұрын

  Thanks, it's good condition now. Thank you for watching!

• 
  @dragosbogoi Жыл бұрын

  Nice build! Is it faster in the real world than the 1 motor equivalent (apart from the increased torque)? Thank you.

• 
  @willshobbytime Жыл бұрын

  Increased speed is very marginal, i think. But with speed gears it good climber, keeps up high wheel speed👍👍 Thanks for checking my vid!!

• 
  @troypostie1252 Жыл бұрын

  Wow! Magic stuff dude! I'd pay a good price for that trans😮🎉🎉

• 
  @willshobbytime Жыл бұрын

  If you or your buddy have 3d printer the file is in sale on cults. Thanks for checking my vid! Much appreciated!!

• 
  @mountainmikefabs8143 Жыл бұрын

  Sweet !!

• 
  @willshobbytime Жыл бұрын

  Thank you!

• 
  @rcgeneration824 Жыл бұрын

  Thing of beauty! I've had mine for over a year, and I absolutely love everything about it. I just can't get over how quiet it is! I can't Wait to buy the pick up truck version.

• 
  @willshobbytime Жыл бұрын

  it's one of my favorites. Quiet and not very heavy, makes it perform well in my opinion. Thanks for commenting and checking my vid!

• 
  @souledoutrc8174 Жыл бұрын

  Nice 👍

• 
  @user-mq5oi1yr7l Жыл бұрын

  Nice 👍 👍 👍

• 
  @GatzillaPlay Жыл бұрын

  Very entertaining 👍👍👍

• 
  @willshobbytime Жыл бұрын

  Thank you for watching! Glad you liked🙏

• 
  @user-mq5oi1yr7l Жыл бұрын

  After crossing a nice bridge. I'll use the rope to escape It's a lot of situational🙏🙏🙏 I saw it well done 👌👍😎😍

• 
  @willshobbytime Жыл бұрын

  It was fun to make indeed😁 Thank you for watching and commenting!!

• 
  @PrizelTatzeRC Жыл бұрын

  very nice car and trail!

• 
  @willshobbytime Жыл бұрын

  Thank you for watching! It is nice to hear you liked my vid🙏

• 
  @manta1121 Жыл бұрын

  Nice video❗✨The log crossing at the beginning is very thrilling! But it can also be fun. 👍😊

• 
  @willshobbytime Жыл бұрын

  It was fun and thrilling indeed😁 Actually one of the jeeps slipped in to mud. I had only short hiking boots and waters was knee deep so..😂

• 
  @manta1121 Жыл бұрын

  @@willshobbytime 😅😅😅

• 
  @nathanaelgreene9840 Жыл бұрын

  Just like it’s full-sized companion

• 
  @Nick--rw1zx Жыл бұрын

  It's ok with a Trx 4 scale 1:10

• 
  @manta1121 Жыл бұрын

  Nice video❗✨The sense of presence is wonderful!👍

• 
  @willshobbytime Жыл бұрын

  Thank you! Did you surprised trx4m performance?

• 
  @manta1121 Жыл бұрын

  @@willshobbytime What a surprise! The driving performance is astounding for an RC crawler of this size.😱👍✨

• 
  @SKULL0fD3ATH. Жыл бұрын

  Get Better tires for your Comanche or MJ for short (not a Cherokee FYI) plus the mini is going to be lighter so it's not gonna sink as much.

• 
  @willshobbytime Жыл бұрын

  It is Comanche, i've been done Cherokee vids straight over year so accidentally put cherokee in it, noticed now. Thanks for correction and checking my vid! Much appreciated!!

• 
  @user-mq5oi1yr7l Жыл бұрын

  Wow! You ran a difficult mud drive Bronco m. He's good at driving in a cute way 👌👏👏👍👍

• 
  @willshobbytime Жыл бұрын

  I think this was too easy course for Trx4m😁

• 
  @CAPRAQUEENRC Жыл бұрын

  I love this, finally someone else that thinks outside conventional RC standards ❤

• 
  @willshobbytime Жыл бұрын

  Hey that's nice to hear:) The plan is to make more DIY vids on channel, it's really fun aspect of the RC hobby

• 
  @user-mq5oi1yr7l Жыл бұрын

  You drove with nice cars🙏🙏🙏 Hot summer is coming here Watching the video makes me feel cool Thank you for the fun music and video 👌👍😎😍

• 
  @willshobbytime Жыл бұрын

  Enjoy the hot summer friend! We got cold start for summer (no snow though)😁 Thank you for watching this!

• 
  @user-mq5oi1yr7l Жыл бұрын

  @@willshobbytime Thank you very much, my friend

• 
  @rcplaytime Жыл бұрын

  Love this 😀 brilliant off roading, brilliant trucks 😀😀👍👍

• 
  @willshobbytime Жыл бұрын

  Thanks mate!! I'm glad you like it😁

• 
  @wolf-RC87 Жыл бұрын

  Very nice

• 
  @willshobbytime Жыл бұрын

  Thank you for checking this!

• 
  @rcdaejeonrc5878 Жыл бұрын

  It's cool ~~~ I'm going to watch the video well

• 
  @willshobbytime Жыл бұрын

  Thank you! Hope you enjoy it😁