Пікірлер

• 
  @AngelGarcia-kb3sx2 күн бұрын

  Hi, please can you show how bushings go, please?

• 
  @GamersWorld223 күн бұрын

  I wonder if this would work on the ninja 500.... are they safe? Any chance of wiggle? Does it sit more aggressive without bumping anything

• 
  @Rex1000_RR2 күн бұрын

  The 500 is pretty much the same bike as the 400 with just some changes to the engine so it should work. It def helps positioning immensely for me. There are others for even more aggressive positioning but any further than this set up you have to either cut the fairings or get race fairings. They are def safe as long as they are installed correctly. These are made my woodcraft which is a solid company that makes a lot of products for track/race bikes.

• 
  @GamersWorld222 күн бұрын

  @@Rex1000_RR sounds good! They actually make ninja 500 ones. I'm just wanting to make sure they are going to be less upright seating than the stock ones

• 
  @GamersWorld222 күн бұрын

  @@Rex1000_RR oh and does it come with the grips

• 
  @Rex1000_RR2 күн бұрын

  @@GamersWorld22 for sure def a worthwhile investment and no doesn’t come with grips

• 
  @valcialmeida30274 күн бұрын

  Se mostrasse o interior do veículo vc ia ganhar mais seguidores e like uma dica

• 
  @Rex1000_RR4 күн бұрын

  Thanks for the input. I show the interior in some of my other videos. Was there something specific you wanted to see?

• 
  @jayg28956 күн бұрын

  Do you mind talking about your mats? Did that came with the car or you have to buy that separately? If so, what brand did you buy?

• 
  @Rex1000_RR6 күн бұрын

  Hi! BMW has mats but they’re a lot more expensive. These ones were off of Amazon and have been great. Good quality and def cuts down on cleaning time Floor mats: a.co/d/3BTRXfl Cargo mat: a.co/d/4Ru11vO

• 
  @jayg28956 күн бұрын

  @@Rex1000_RR thanks for the link!

• 
  @curtgeorges491420 күн бұрын

  Put on some carbon or black m mirror caps will look great on this bro

• 
  @Rex1000_RR14 күн бұрын

  Hmm yea I’ll have to see what’s out there!

• 
  @blob209221 күн бұрын

  m stripes on the front grille on a 40i a big faux pas

• 
  @Rex1000_RR20 күн бұрын

  You’re entitled to your opinion but to me true M vehicles retain the M badging. M Sports like mine are the tri-color badging. Got it on my 335i M Sport as well 🤟🏾🤟🏾

• 
  @jaggededge_real26 күн бұрын

  Did you notice any impact on fuel economy due to the Front Splitter?

• 
  @Rex1000_RR25 күн бұрын

  Honestly I don’t think it helps or hurts. Def not anything wind tested. I get about 20-21 mpg primarily city driving and mostly in eco mode. Didn’t change after adding splitter. I drive fairly quick but don’t have a lead foot. Got heavy popo in my area and they love to pull people over

• 
  @jaggededge_real26 күн бұрын

  Very informative videos. We are also looking to get an X7, and your review and other videos sealed the deal for me. I am also planning to emulate your X7’s look once we get ours. Thanks for providing all the links in your other video. Can you share details on how you do the ceramic coating yourself and what products you use? Also, any thoughts on getting bucket seats vs. a bench? I am leaning towards a bench because it allows the second row to fully fold down, and the cup holders for kids would be much more accessible being in the middle as opposed to on the floor.

• 
  @Rex1000_RR24 күн бұрын

  Thanks for the support! Just made a video answering your questions. Please let me know if you have anything else you would like for me to address. Good luck with the purchase of your x7! kzread.info/dash/bejne/n42HyY9pqZm7kag.htmlsi=PLlZB4DnQHxmxLyK

• 
  @PowerofPurity101Ай бұрын

  Nice car. Motivational review

• 
  @Rex1000_RR29 күн бұрын

  Much appreciated! Took a lot of hard work

• 
  @85clangaАй бұрын

  Hey bud. What year is your 400?

• 
  @Rex1000_RRАй бұрын

  Hey! Mine is a 2022

• 
  @BoneStarr2kАй бұрын

  Thanks for the video review. I really appreciate it, and it's great to hear a review from someone who actually owns the car and uses it daily! I actually agree that the 40i is probably the better choice long term, my wife will also be using the car daily and me on the weekends only.

• 
  @Rex1000_RRАй бұрын

  Not a problem! Let me know if you end up getting it. Def share some pics and your thoughts

• 
  @dodongwow6350Ай бұрын

  You replace also the Abs hose?

• 
  @Rex1000_RRАй бұрын

  I opted to get a bike without abs. If you have abs you would have to change that as well or delete it

• 
  @NorCal_BraaapАй бұрын

  Looks like a lot of fun💯

• 
  @Rex1000_RRАй бұрын

  Not much can beat riding a motorcycle on a racetrack

• 
  @NorCal_BraaapАй бұрын

  Nice bike✌️ How do they feel compared to stock??

• 
  @Rex1000_RRАй бұрын

  Thanks! They feel great. Def get much better response from it than stock. I would recommend.

• 
  @kyle37767Ай бұрын

  Great video! Where did you get the mudguards from?

• 
  @Rex1000_RRАй бұрын

  Thanks! They’re from Amazon. I have the link below. a.co/d/fM3F1FI

• 
  @azmaymi9237Ай бұрын

  Amy links for nar ends ninja 400 2021? And link for this?

• 
  @Rex1000_RRАй бұрын

  Here’s the link for the lever guards just some cheap ones from Amazon can prob find even cheaper on aliexpress. Def not the best but works for my purposes a.co/d/0qhTEO6 The bar end came pre installed on the woodcraft clip-on www.sportbiketrackgear.com/woodcraft-kawasaki-ninja-400-2018-clip-on-riser-assembly-w-bars/

• 
  @BoneStarr2kАй бұрын

  Would be great to get a review from you about the car for a family and pros and cons etc. looking to pull the trigger on one of these but not sure about the m40i or the M60i

• 
  @Rex1000_RRАй бұрын

  Made a quick video for you. Let me know if you had any specific questions kzread.info/dash/bejne/fISp1biLp92dhso.htmlsi=5f4DCCTLAAM4qpaf

• 
  @BoneStarr2kАй бұрын

  @@Rex1000_RR Thanks for the review!

• 
  @KINGCAESAAHАй бұрын

  Hell yea

• 
  @jennyh61912 ай бұрын

  How did you take the barend stuff out to install the spacer? I couldn’t take the plug out

• 
  @Rex1000_RR2 ай бұрын

  Is yours from woodcraft? These are just pushed in there so you just use a set of pliers and yank it out. Takes some effort. You can try to not damage the barend but I found you had to really squeeze the pliers so mine got a few scratches. Not a big deal since I’m not going to use the bar ends anyway

• 
  @DavidNeculai-kt3re2 ай бұрын

  Mi PIACE MOLTO GRAZIE MILLE KZread BMW X7 POSTI 2024 CULORE BIANCO GRAZIE COANDO ARIVA AMEN

• 
  @Rex1000_RR2 ай бұрын

  You’re welcome!

• 
  @maraheumann60542 ай бұрын

  That helped a lot thank you very much !

• 
  @Rex1000_RR2 ай бұрын

  Awesome! Happy to help

• 
  @sampathlk272 ай бұрын

  Bruhh show me the process of removing the handle bar weights and installing the lever protectors

• 
  @Rex1000_RR2 ай бұрын

  Are you having trouble with something? There’s not much to it just gotta remove the bolt on the side of the bar end and switch it out for the lever guard. Just position the lever guard correctly based on your preference and loctite for extra security. Let me know if you have any questions. I got new clip-ons coming in so I’ll make a more thorough video when I’m installing those in the coming weeks

• 
  @MikeRides2 ай бұрын

  When my brake caliper fell like yours did a bit of fluid came out. Should I worry about that?

• 
  @Rex1000_RR2 ай бұрын

  That’s seems odd to me was it brake fluid? That system needs to be air-tight otherwise you won’t have proper brake pressure. Def want to try to verify where the fluid came from. Check the pads and make sure the pistons aren’t pitted. Maybe afterwords quickly bleed the brakes and top off your brake fluid. Make sure you have strong brake pressure before you ride.

• 
  @MikeRides2 ай бұрын

  @@Rex1000_RR ahh unfortunate. I just learned how to even get the wheel off yesterday. I’ve been trying to get this bike ready to ride for weeks 😂😅

• 
  @Rex1000_RR2 ай бұрын

  @@MikeRideskeep working on it man. The first go around can be tricky but def good skills to learn and have the pride of being able to take care of your bike properly 😊

• 
  @MikeRides2 ай бұрын

  @@Rex1000_RR most definitely man. I finally got it road ready today. Took it out for the first time. Had a blast!

• 
  @ZinnatNasrin3 ай бұрын

  Hey, I was analyzing your KZread Channel. I saw there are some big problems in your channel. As a result you didn't get views from video. I can solve it freely if you give me opportunity. I've got some exciting plans for your Channel, and I'm eager to share them with you. Let's connect and explore the possibilities.

• 
  @SherSlabescu3 ай бұрын

  Hello! Those brake lines are lighter than the OEM's? Thank you!

• 
  @Rex1000_RR3 ай бұрын

  Honestly I’m not sure. The reason to switch to braided lines is because it doesn’t undergo hose expansion under pressure. This allows you to have more feel and a better response when braking.

• 
  @mycool_p64833 ай бұрын

  At how many miles more or less did your tire wear indicate it’s time for a change , based on how you’ve been riding and your local roads ?

• 
  @Rex1000_RR3 ай бұрын

  I’m just under 4k miles now and def had a lot more to go. Hard to say exactly how much tho. Front def had a lot more to go than rear. Road condition and riding style def play a big role in how long tires last. In Florida we have a lot of straight roads so more likely for the tire becoming squared off as well. Always important to do a pre-ride inspections and pay attention to those wear bars

• 
  @ShawnButler-vz6dj4 ай бұрын

  I’m having a hard time finding a stand for my wife’s 2023 ninja 400. Revzilla didn’t have anything, I don’t understand

• 
  @Rex1000_RR4 ай бұрын

  Pitbull stands are great although a bit expensive www.pit-bull.com/kawasaki-ninja-400-motorcycles Here is an Amazon one that would work a.co/d/6R0JsN4

• 
  @NSDG8133 ай бұрын

  pretty much any amazon or ebay stand will work

• 
  @equipoiise4559Ай бұрын

  i bought mine from vevor and its cheap and does the job! i can link if you want

• 
  @nathanswindler8545Ай бұрын

  Just got me a trackside last week from cycle gear

• 
  @jaredanderson74944 ай бұрын

  Thank you. Brother just gave me an old one he used on his harley.

• 
  @Rex1000_RR4 ай бұрын

  Nice! Def a useful addition

• 
  @rls07114 ай бұрын

  Very helpful instruction😂

• 
  @Rex1000_RR4 ай бұрын

  Yeaaaa not much to it haha

• 
  @cerebralabyss99934 ай бұрын

  Hi,why do you need to flip the bracket if the shocks are the same length ?

• 
  @Rex1000_RR4 ай бұрын

  If the aftermarket shock you’re using is the same length then you do not. Can just switch out the shocks without having to mess with the brackets at all

• 
  @benoit197614 ай бұрын

  Can you show how you install it

• 
  @Rex1000_RR4 ай бұрын

  Sure can kzread.info/dash/bejne/n2qorcyJiKXRmM4.htmlsi=Zo2AlR04V4-j8mVx

• 
  @natvega14 ай бұрын

  Did you try moving the adjuster to #5 before the swap???? Men need more preload adjustment for their weight.😮

• 
  @Rex1000_RR4 ай бұрын

  I did not. I’m not too heavy only weigh about 165. The aftermarket shock allows for more adjustments. Plus it allows the rear to feel a lot more planted and less bouncy.

• 
  @NorCal_Braaap4 ай бұрын

  Nice bike💯

• 
  @AugustoTobias5 ай бұрын

  What stands are you using?

• 
  @Rex1000_RR5 ай бұрын

  I’m not sure the brand. Just some cheap ones I got off amazon years ago. Def not the best. Pitbull stands are great and honestly for a front stand if you don’t have a spool then much safer and easier to get the stand that inserts into your lower triple tree (steering stem). Rears def want to use spool stands def makes it much easier/safer as well

• 
  @haters99145 ай бұрын

  why don't you try making an intake path like the new ninja 250 ARRC and velocity

• 
  @Rex1000_RR5 ай бұрын

  I might do something like that in the future but the reason I dropped down to a 400 was to become a better rider. They sell a Ram air but might not be worth it for this bike. Some people have also cut the airbox and adding stacks. I plan on tuning the bike eventually so will most likely figure it out by then

• 
  @alexanderpatterson21795 ай бұрын

  can you do a night drive video

• 
  @Rex1000_RR5 ай бұрын

  Yes I can. Looking for something in particular?

• 
  @ryannguyen83925 ай бұрын

  Can i ask for the link of this front lip

• 
  @Rex1000_RR5 ай бұрын

  a.co/d/4L5EMyK

• 
  @Rex1000_RR5 ай бұрын

  Just a disclaimer I had to take the splitter off. It’s pretty thin and just the way the front splitter works puts a lot of pressure on it. Looks great but def needs to be sturdier especially if you drive fast.

• 
  @user-hj4mi5id1w6 ай бұрын

  Is this electric?

• 
  @Rex1000_RR6 ай бұрын

  Nope, ninja 400 parallel twin

• 
  @Rex1000_RR6 ай бұрын

  Thanks! I def agree

• 
  @performingspecs78416 ай бұрын

  I like the front splitter, adds a nice look to the front.

• 
  @waheedkhaja336 ай бұрын

  did you find all these on aliexpress?

• 
  @Rex1000_RR6 ай бұрын

  Yup, just search ninja 400 and you’ll find them

• 
  @Rex1000_RR6 ай бұрын

  For everything here no but to really get more power out of the engine then it’s a good idea to flash it. I’m thinking of eventually doing a dyno flash but I haven’t reached my limits just yet with the current set up so not in a rush to do so

• 
  @jaymarkmarbebe58656 ай бұрын

  Do you need to ecu flash the bike

• 
  @Rex1000_RR3 ай бұрын

  For everything here no but to really get more power out of the engine then it’s a good idea to flash it. I’m thinking of eventually doing a dyno flash but I haven’t reached my limits just yet with the current set up so not in a rush to do so

• 
  @jaymarkmarbebe58656 ай бұрын

  How to take out the head Cowl 🙏🙏🙏

• 
  @NinjaTwo28 ай бұрын

  Hi, where did you buy your fairing kit?

• 
  @Rex1000_RR8 ай бұрын

  Got these through amotopart

• 
  @NinjaTwo28 ай бұрын

  @@Rex1000_RRthanks

• 
  @Rex1000_RR8 ай бұрын

  That’s interesting to note thanks for the heads up! Mine hasn’t changed too much but I also didn’t fill it to the brim just upper third of the tick marks in the glass. I’m def going to keep an eye on it tho.

• 
  @zackiaryruddick7018 ай бұрын

  I have noticed that when you put oil in the engine and cheek the sight window then go ridding for a few days the oil level comes up alot 😳 it can make oil get in to the throttle body and stuffs everything up , so i always put less in the engine now and a few days later its at the right level ( Higher that it was when i filled it up ) just a little tip , if you just fill to the middle level then wait a fews days you will see how much different it is it will be over the top line

• 
  @the400guy778 ай бұрын

  Hey man I was wondering if you could tell me where you ordered your shifter, rear brake, and rear sets? and what the brands are?

• 
  @Rex1000_RR8 ай бұрын

  When you say shifter and rear brake you’re talking about the levers right? It’s all part of the rearsets from Kemimoto. Mine are in black. The link only goes titanium which is a little cheaper but the black is not bad either $136.39 Just found this amazing item on AliExpress. Check it out! $103.94 30％ Off | Rearsets Footrest Rear Sets Foot Pegs Footpegs CNC aluminum alloy For Kawasaki Ninja 400 Z400 Ninja 250 Ninja250 2019-2020 a.aliexpress.com/_mLOUi6o

• 
  @Rex1000_RR8 ай бұрын

  Here are the links for how to install them kzread.info/dash/bejne/gYWuk6ardb2wYpc.htmlsi=cF6UTqTOPc48sF2H kzread.info/dash/bejne/qphh2bWOlbS3l6g.htmlsi=5x_8SasrY_lDRKr7

• 
  @user-ru9kk5is4o8 ай бұрын

  Nice looking bike,just be careful out there son,ride smart,lol

• 
  @emster56249 ай бұрын

  You make it look easy, man. Could u install mine? 🤣

• 
  @Rex1000_RR5 ай бұрын

  It really isn’t bad! Just take it slow and take pictures if you need help remembering what goes where