Пікірлер

• 
  @markbell112 күн бұрын

  Noticed a small error on one of your drawings. One of your dividers is marked at 7" instead of 7 1/4". The 7 1/4" is correct as the 1/4" is the dado allowance.

• 
  @markbell16 күн бұрын

  Also noticed when I enter the angled side legs into Autocad that the measurement is 33 3/16" not 33 1/16". I know it's only 1/8" of an inch, but to keep things square. Thanks for the sketches. I've entered them into Autocad to produce nice plans.

• 
  @markbell123 сағат бұрын

  Found another oversight or oops that your video/drawings have wrong. The Angle of the cutout - is not 66.1 degrees, although that number matters. The angle of the cutout is 90 degrees - 66.1 degrees = 28.4 degrees <- THE BEVEL IS 28.4 DEGREES.

• 
  @ajaydask1356Ай бұрын

  can i get the git

• 
  @DanielPerez-hy6qi2 ай бұрын

  Very useful several years later..

• 
  @Te-BiL5 ай бұрын

  when you mentioned math🤣😂🤣

• 
  @DRJTUBECHANNEL7 ай бұрын

  Great work! Looks very good. What's that 16 channel fader controller you've got on the desk?? Model ?

• 
  @TerrisLinenbach7 ай бұрын

  No collaborative editing? In 2023?

• 
  @officialWWM8 ай бұрын

  This is exactly what I need. I have the same mixer as you, so it’s good to know it will fit!

• 
  @golfingfinatic2 ай бұрын

  What mixer is that? Can it control the DAW software too I assume?

• 
  @officialWWM2 ай бұрын

  @@golfingfinatic it’s the Presonus Studiolive 32sc and yes, it has DAW mode to use it as a daw controller. It works best with Studio One but it will work with others as well.

• 
  @alvis501 Жыл бұрын

  Hi Richard, Thanks for the lovely video. Is it possible for you to provide the dimension in Centimeters? What is weight

• 
  @23ymcheung Жыл бұрын

  Do you have a github repo of this project?

• 
  @whodder06 Жыл бұрын

  GREAT video Richard!! I have a question regarding your build? When constructed, what is the length of the keyboard tray? Is it a total length of 59” as outlined in CutPlan3 or 54 1/2” as per my math? As per James message below, I actually have a NI S88 controller and may have to reverse engineer the desktop. Appreciate your response good sir!

• 
  @septembersoul5938 Жыл бұрын

  I wish Output kept these in stock. It's difficult to get desks/stands right now. There's some cool options, but a lot of them are either out of stock, or they're overseas. I like Jaspers and Black Panther Systems multi tier synth stands, but I don't fully understand how customs works/charges. From what I understand, if you get something sent from overseas, from certain countries, and spend a certain amount, customs will charge 7-10+%. I feel like I should just go for it, but I could put the costs towards a nice synth or drum machine. I hate the clutter that I currently have, so I feel like a nicer desk, and a premium synth stand, will help my workflow and inspire me more. Having machines scattered all over different desks, is not inspiring at all. I feel that having a nice desks, and proper stands will be more inspiring than a new piece of premium gear. I'm just a bit unsure what I should get. I have tools and experience, but it would be difficult to build what I want, due to my only saws being circular saws and a sawzall . I used to have a table saw, and jigsaw, but not anymore. I feel that I'm better off buying one from a company. I like your design though. I wish I could build it.

• 
  @mumtazalirajput4160 Жыл бұрын

  I am gold warkar

• 
  @mumtazalirajput4160 Жыл бұрын

  I want lon

• 
  @darrengendron393 Жыл бұрын

  HEY RICHARD I THINK YOU FORGOT SOMETHING BUD

• 
  @teddybeargram3 Жыл бұрын

  I wish I could build this. That is the exact desk I need.

• 
  @SoundDesignMusicProducer Жыл бұрын

  that's really cool! I wanted to build this for a while now. This will make my life way easy. thanks for this. do you have a list for the hardware like the screws you used?

• 
  @Enoe24 Жыл бұрын

  How did you start the angle hand cuts in the cutouts?

• 
  @HOLLASOUNDS Жыл бұрын

  You would not be able to have a cat around that mixer, they would be all over it with the snake like movement.

• 
  @cruzer1473 Жыл бұрын

  somebody was listening in Math class !

• 
  @joeymc52722 жыл бұрын

  Wish you would have done a step by step for people who dont have the skills to build stuff like this. Its great you showed you can do it but most people dont have those kind of skills. I am going to be building a desk similar to this here soon so i appreciate seeing the measurements on there though so that takes the guess work out for me :).

• 
  @kosmo_komputer2 жыл бұрын

  Haha this is brilliant. All done from a picture in a few seconds of a marketing video.

• 
  @giyosjonjumaboev32572 жыл бұрын

  How did you prepare this slide? And how does it perform tasks when you press the touch screen?

• 
  @Chavacano2 жыл бұрын

  i didnt realise this video was on mathematics... specifically Trigonometry ..... dude...WTF?

• 
  @stevencirile2 жыл бұрын

  I can design your setup see my setup work here kzread.info/dash/bejne/oYetq6yyYZfZctY.html

• 
  @ephraim.19642 жыл бұрын

  Phenomenal!! The mods you implemented really makes it look better than the original. Kudos!!!👏👏👏🙌🙌

• 
  @asishm37032 жыл бұрын

  noice.

• 
  @thrutherockies36872 жыл бұрын

  Great desk :-) Can I ask what brand is your mixer?

• 
  @cheadlejuice-musicproducti58752 жыл бұрын

  Great video. I'm making one! I also have specific requirement's for my setup that I cant find without spending 1500$. Thank you again!

• 
  @coopdawg2 жыл бұрын

  how do I update the discovery file to edit the permission for view and edit on a ppt? Do I rebuild the application or? the hold readthedocs API documentation is gone.

• 
  @abhirupjana99392 жыл бұрын

  Which mixer that was??

• 
  @theway30582 жыл бұрын

  Best part of this video is the pink drum kit in the back ground.

• 
  @trismstudio2 жыл бұрын

  Thanx And Love for you brother for providing the drawing paper.

• 
  @triv77282 жыл бұрын

  I was thinking the same thing I wanted angled racks I been holding back on this desk a while. I cant find something else that suits my needs but the rack space is my down fall. I may have to build one too.

• 
  @zakaidia21222 жыл бұрын

  Hey Richard! Could you provide links to rack covers (where there is no hardware), and all hardware models within your racks? 🙏🏼🙏🏼🙏🏼

• 
  @zakaidia21222 жыл бұрын

  Also thanks for this sick video! Can’t wait to make one!

• 
  @WallyMpls2 жыл бұрын

  Nice Echoplex!!!

• 
  @liongirl65852 жыл бұрын

  Thank you so much. Could you kindly refer for sample code ?

• 
  @drenolynbeats2 жыл бұрын

  In the words of DJ Khaled “You’re smart”!

• 
  @4tomhenry2 жыл бұрын

  great tips to making your own! Curious about the mixer / surface.... looks like a 16 channel of sorts? Do you still have it or have you changed it out. THANK YOU!

• 
  @VioletBell2 жыл бұрын

  Can’t find 5x5 sheets of plywood! Did you buy locally or order online? May try to apply the drawings to 4x8 sheets and see how they fit. Advice welcome 🙏🏼

• 
  @MePeterNicholls2 жыл бұрын

  It works out at near £1000 in UK.

• 
  @tony1130002 жыл бұрын

  Looks great - thanks for sharing - I echo some of the comments below and wish I had the skillset to do this myself

• 
  @thisislarsa2 жыл бұрын

  Hey Richard, I'd love to know how you went about mounting the hardware. I have a Platform, and I just bought an Apollo x8. I'm curious how you did the rack mounts. Would you be willing to share? Thanks!

• 
  @federicoverdicchio2 жыл бұрын

  As I think of building this myself, I found someone who did it already! Typical haha Thanks a lot for the video!

• 
  @PoizenJam2 жыл бұрын

  Would it be possible to add angled racks to the middle section as well? It looks like it does some loud bearing for the upper shelf. Not sure it would hold if the lower shelf was hollowed out in the middle.

• 
  @MichaelHart22 жыл бұрын

  The dropbox link doesn't work anymore...Does anyone have a copy of the measured drawings??

• 
  @cyberbabagaming42733 жыл бұрын

  Good

• 
  @Superdooperhero3 жыл бұрын

  So I can connect to anything, but for the most used interface in the world (paged REST) I have to do programming in C# which I don't have. WTF Microsoft.

• 
  @joewilliams53963 жыл бұрын

  Thank you. 😀👍

• 
  @-musiclee-3 жыл бұрын

  Output should hire you, or build one with your tweaks, 4U is amazing, and the Angle on Racks, is GENIUS !!! and i like no cutout on bottom tray

• 
  @jacobhumlicek36343 жыл бұрын

  Hey can you please tell me what kinda mixer you have ??