This channel is dedicated to building Hot Rod, Pro-touring, Restomod projects. This will include the Big 3, with small block chevy engines, Chrysler Magnum/Gen 3 Hemi engines, and Ford 5.0 pushrod engines.
good job, man! + 1 subscriber on the channel :) best regards from Ukraine!
@jonhammond22812 күн бұрын
I appreciate your support.
@jonhammond22812 күн бұрын
I just subscribed
@jonhammond22812 күн бұрын
#1 from Kentucky USA
@olddude2.5 күн бұрын
Ha! I'll let you know you are wrong. You guys are always wrong...
@jonhammond22815 күн бұрын
Someone sounds pretty salty
@jonhammond22815 күн бұрын
Don’t be mad because your rusty bucket will never run
@olddude2.4 күн бұрын
At least you weren't reviving that junk mopar all weekend. The little 307 is quiet. I thought it was an inline 6.
@olddude2.4 күн бұрын
Really, I did. Lmbo baby motor
@jonhammond22814 күн бұрын
Be careful starting that 4 banger of yours, it will throw a rod
@bradleyrosales245920 күн бұрын
Casually scrolling by and I thought this was guga😂
@BanthaPooDoo6426 күн бұрын
Right now my son and I are giving our garage a make over and we hope to wrap it up before winter ,We want to move our 79 TA back in and start its a long over due restoration.
@ramrunnergarage594125 күн бұрын
Im hopilng to get this one done next month, would like to take it to the street rod nationals in August. Good luck with your garage makeover.
@JayHammer-lj5fnАй бұрын
Even when your car is lined out, things like this still happen
@LifeWithJay22Ай бұрын
How bout Paul? Or OG Paul
@JayHammer-lj5fnАй бұрын
Power tour looks like so much fun
@olddude2.Ай бұрын
I'm not
@jonhammond2281Ай бұрын
That’s because you are a hater
@JayHammer-lj5fnАй бұрын
Glad everything went better today
@209464Ай бұрын
Tough break.
@Ferx_0Ай бұрын
Bro looks like he could be the greatest father ever
@jonhammond2281Ай бұрын
I try. I have not ever mentioned it on the channel but the S10 is my son’s truck not mine. I’m teaching him how to work on hot rods. And he has learned a lot
@LeftForDeadGarageАй бұрын
Hopefully you didn’t wipe a cam. Good luck with it
@ramrunnergarage5941Ай бұрын
We are doing the autopsy as we speak, so far so good.
@olddude2.Ай бұрын
Y'all should stick to brakes
@jonhammond2281Ай бұрын
It’s funny that this engine was fine before you moved into the neighborhood
@olddude2.Ай бұрын
Lmbo. I wouldn't take anything out on a 1st Gen Camero. But that Mopar is fair game.
@olddude2.Ай бұрын
Lmbo. I wouldn't take it out on a 1st Gen Camero. But that Mopar is fair game.
@michaelmartinez9185Ай бұрын
MICHELTFDSSKKKJR
@jonhammond22812 ай бұрын
If there is anyone who has no room to talk about playing with rear ends it is definitely olddude2
@ramrunnergarage59412 ай бұрын
Hey olddude2, I have seen your rear end, and believe me no one wants to play with your rear end.
@olddude2.2 ай бұрын
Oh, look, Hammond is playing with his rear end again. Looks like a team effort. 😂
@olddude2.2 ай бұрын
Please they wont have a running car
@jonhammond22812 ай бұрын
Maybe if we didn’t have some jerk stealing our tools we would be farther along
@jonhammond22812 ай бұрын
If we didn’t have a troll stealing our tools we would be farther along
@olddude2.2 ай бұрын
Lol, I will get all your 10mm
@jonhammond22812 ай бұрын
Look us up at the start. We plan to start power tour at Bowling Green
@andhotrodshop2 ай бұрын
See y’all out there 👍🏻🙌🏼👊🏼
@jonhammond22812 ай бұрын
What are you driving?
@andhotrodshop2 ай бұрын
@@jonhammond2281 Angie’s 39 Chevy 👍🏻
@olddude2.2 ай бұрын
Please, they won't have a running car
@danielrogers92703 ай бұрын
I am at this stage now on my 4.8LS build. My truck is bagged and the exhaust can’t dip below the frame. This is exactly what I am looking for.
@danielrogers92703 ай бұрын
1988 GMC S15 4.8LS swap with shorty headers
@ramrunnergarage59413 ай бұрын
Is yours a single cab? And what brand headers?
@jonhammond22813 ай бұрын
If you watch either the s10 charging system or the exhaust drone videos you can hear them
@jonhammond22813 ай бұрын
If we can get enough interest we start selling them online
@olddude2.3 ай бұрын
Well it's just who I am. Lol. OH if some one ask you to go snipe hunting. They are just trying to find someone to have sex with...
@JayHammer-lj5fn3 ай бұрын
I don’t know why some people (olddude2) wants to go on KZread and act disrespectful
@jonhammond22813 ай бұрын
Hey olddude2 you should go there. I hear there is some good snipe hunting, I’ll show you where to find them
@olddude2.3 ай бұрын
Damn I have to admit that looks like a blast. Why didn't you stay it's so nice in Kentucky with out YOU...
@ramrunnergarage59413 ай бұрын
Hey olddude, I better have my new 10mm sockets when I get back.
@olddude2.3 ай бұрын
I'm glad y'all are not home!! Peace and quiet. Priceless
@JayHammer-lj5fn4 ай бұрын
The Price of 77's are getting way to high
@ramrunnergarage59414 ай бұрын
Yeah, its an 81. I started a playlist for this project.
@micahap15594 ай бұрын
So what model is this? It's hard to tell. From the quick flash of the spoilers I'm guessing 79-80 urethane.
@chehystpewpur47544 ай бұрын
hey if you guys havent came up with a name for the s10 call it ole nat. it looks like a natural ice can every time i see it in like ole natty. my blazer was gonna get called ole nat but it got a diff name someone gave it and it was ok.
@ramrunnergarage59414 ай бұрын
So what did your Blazer get named?
@chehystpewpur47544 ай бұрын
@@ramrunnergarage5941 "Boog Suug" one of my friends always used to call it booger sugar till one day it got shortened.
@chehystpewpur47544 ай бұрын
yall got me itchin to get my blazer back out. but i got a few more weeks before i put her back on the road. also instead of needing access panels. i welded up my own engine mounts and it allowed me to lower the engine some and gave me tons of clearance. also i would have rather bought pipes from you guys than the crook i had to pay to do the exhaust not the way i asked for. and he broke my car during the quote. forcing me to leave my car there and walk home... and miss half the day of work.
@ramrunnergarage59414 ай бұрын
I support whatever you want to wrench on.
@ramrunnergarage59414 ай бұрын
You need to send us some pics of your Blazer, you mentioned it before.
@chehystpewpur47544 ай бұрын
@@ramrunnergarage5941 better yet i dont even have to wrench on it. its just parked for winter but next month it needs to be on the road so i just gotta dust it off and turn the key. but i have taken my race scooter out on these freak warm days in winter. and got it tuned up. 3 minor adjustments and shes ready to ride some this year. the scooter is almost as quick as the blazer. and its only 70cc 2 stroke. its the most fun you can possibly have running errands and small stuff. the scooter only weighs 150 lbs is water cooled over 20 hp and launches at 10,000 rpms. this little angry swarm of bees is equivalent to over 2000hp per liter. its hp per cylinder is about the same as a mid 80's corvette. doesnt sound like much but having no weight its the type of thing you set land speed records with. its scary that i want to double that to make it "fun". i think i may have a problem...
Пікірлер
good job, man! + 1 subscriber on the channel :) best regards from Ukraine!
I appreciate your support.
I just subscribed
#1 from Kentucky USA
Ha! I'll let you know you are wrong. You guys are always wrong...
Someone sounds pretty salty
Don’t be mad because your rusty bucket will never run
At least you weren't reviving that junk mopar all weekend. The little 307 is quiet. I thought it was an inline 6.
Really, I did. Lmbo baby motor
Be careful starting that 4 banger of yours, it will throw a rod
Casually scrolling by and I thought this was guga😂
Right now my son and I are giving our garage a make over and we hope to wrap it up before winter ,We want to move our 79 TA back in and start its a long over due restoration.
Im hopilng to get this one done next month, would like to take it to the street rod nationals in August. Good luck with your garage makeover.
Even when your car is lined out, things like this still happen
How bout Paul? Or OG Paul
Power tour looks like so much fun
I'm not
That’s because you are a hater
Glad everything went better today
Tough break.
Bro looks like he could be the greatest father ever
I try. I have not ever mentioned it on the channel but the S10 is my son’s truck not mine. I’m teaching him how to work on hot rods. And he has learned a lot
Hopefully you didn’t wipe a cam. Good luck with it
We are doing the autopsy as we speak, so far so good.
Y'all should stick to brakes
It’s funny that this engine was fine before you moved into the neighborhood
Lmbo. I wouldn't take anything out on a 1st Gen Camero. But that Mopar is fair game.
Lmbo. I wouldn't take it out on a 1st Gen Camero. But that Mopar is fair game.
MICHELTFDSSKKKJR
If there is anyone who has no room to talk about playing with rear ends it is definitely olddude2
Hey olddude2, I have seen your rear end, and believe me no one wants to play with your rear end.
Oh, look, Hammond is playing with his rear end again. Looks like a team effort. 😂
Please they wont have a running car
Maybe if we didn’t have some jerk stealing our tools we would be farther along
If we didn’t have a troll stealing our tools we would be farther along
Lol, I will get all your 10mm
Look us up at the start. We plan to start power tour at Bowling Green
See y’all out there 👍🏻🙌🏼👊🏼
What are you driving?
@@jonhammond2281 Angie’s 39 Chevy 👍🏻
Please, they won't have a running car
I am at this stage now on my 4.8LS build. My truck is bagged and the exhaust can’t dip below the frame. This is exactly what I am looking for.
1988 GMC S15 4.8LS swap with shorty headers
Is yours a single cab? And what brand headers?
If you watch either the s10 charging system or the exhaust drone videos you can hear them
If we can get enough interest we start selling them online
Well it's just who I am. Lol. OH if some one ask you to go snipe hunting. They are just trying to find someone to have sex with...
I don’t know why some people (olddude2) wants to go on KZread and act disrespectful
Hey olddude2 you should go there. I hear there is some good snipe hunting, I’ll show you where to find them
Damn I have to admit that looks like a blast. Why didn't you stay it's so nice in Kentucky with out YOU...
Hey olddude, I better have my new 10mm sockets when I get back.
I'm glad y'all are not home!! Peace and quiet. Priceless
The Price of 77's are getting way to high
Yeah, its an 81. I started a playlist for this project.
So what model is this? It's hard to tell. From the quick flash of the spoilers I'm guessing 79-80 urethane.
hey if you guys havent came up with a name for the s10 call it ole nat. it looks like a natural ice can every time i see it in like ole natty. my blazer was gonna get called ole nat but it got a diff name someone gave it and it was ok.
So what did your Blazer get named?
@@ramrunnergarage5941 "Boog Suug" one of my friends always used to call it booger sugar till one day it got shortened.
yall got me itchin to get my blazer back out. but i got a few more weeks before i put her back on the road. also instead of needing access panels. i welded up my own engine mounts and it allowed me to lower the engine some and gave me tons of clearance. also i would have rather bought pipes from you guys than the crook i had to pay to do the exhaust not the way i asked for. and he broke my car during the quote. forcing me to leave my car there and walk home... and miss half the day of work.
I support whatever you want to wrench on.
You need to send us some pics of your Blazer, you mentioned it before.
@@ramrunnergarage5941 better yet i dont even have to wrench on it. its just parked for winter but next month it needs to be on the road so i just gotta dust it off and turn the key. but i have taken my race scooter out on these freak warm days in winter. and got it tuned up. 3 minor adjustments and shes ready to ride some this year. the scooter is almost as quick as the blazer. and its only 70cc 2 stroke. its the most fun you can possibly have running errands and small stuff. the scooter only weighs 150 lbs is water cooled over 20 hp and launches at 10,000 rpms. this little angry swarm of bees is equivalent to over 2000hp per liter. its hp per cylinder is about the same as a mid 80's corvette. doesnt sound like much but having no weight its the type of thing you set land speed records with. its scary that i want to double that to make it "fun". i think i may have a problem...
Too funny.
@@ramrunnergarage5941 drive.google.com/drive/folders/1KfgFbFAfok-ZOD5UsGzwJ7xrB6YccHZJ?usp=drive_link
Soon we will show how to cover the holes by making removable panels
All the 10mm are mine!!
Old dude, are you crazy? I know you took my 10mm.
Hammond Hammond Hammond... When will you learn?
Old dude, not cool. I needed that socket.
@@ramrunnergarage5941 I have no clue what you are talking about.
When will you learn you can’t always have it your way
@jonhammond2281 It's Burger King. I can always have it my way. Down with the brake shop.
I wonder if he has all of my 10 sockets
If anyone else in the neighborhood is missing their 10mm sockets, we found out why
Never seen that one before, I'll have to try it. You should send this one to that "No Way" Guy
I wouldn't feel comfortable having a creeper like that hanging around my garage like that
There have been some strange things happening around here lately
Cool low buck hack to save time and money
Nice!!!
I will remember that one!!!
It's a marathon. You will be done with that car in 2034
Will you move out of the neighborhood in 2024?
Spying lmao. You push your busines and junk cars on your neighborhood.
Yeah but we work on cars, you just let your crap fall apart and rust
Jayhammer, if you go back to the camaro tune up video we used a zinc additive.
Hey olddude, if you had a life instead of spying on your neighbors all the time you would know how to do this kind of work
I have had bad luck with flat tappet cams. But you do have to use high zinc oil
Hey old dude 2, the floor pans take a while to do right, I don't just screw street signs like you do.
It's a marathon, not a sprint old dude 2.