Could you please do a short video on the separation of the two halves and where the 8 tabs are? I'm having the hardest time at that point (28:00-31:30). Updated: Nevermind! I got through with a screwdriver. Thanks for this video.
@sixsonic Жыл бұрын
do you know if there is any tool to pair another mamba hyperflux mouse to the firefly hyperflux mat?
@tdop Жыл бұрын
Did not know know of this, but was thinking recently what if the mouse damages, if it will be possible to replace with another, I think if there is a Chip ID it can be like in Apple devices, some IC responds for that ID, you would find a good mouse from other set and take the IC from yours and solder to the other. If you require further assistance join omtesla.com tech community.
@Jjtokkrmona3 күн бұрын
Is it possible to fix the left click?
@JeromeCopeland Жыл бұрын
Thank you for documenting this.
@cecilia9131452 жыл бұрын
My keyboard stopped working and it also won’t charge. I got my keyboard a bit more than a year ago so it has passed the warranty period. Mine however is a Bluetooth version. Do you have any idea about what could be the issue?
@i.t.g.54932 жыл бұрын
Thanks for the fantastic video man. I've been trying to find out if it would be possible to lube this keyboard in a simple manner, but now as I have seen the switches in detail, I think it doesn't make any sense.
@HDCowboy2 жыл бұрын
To make removing the screws around the feet much easier (and not having to worry about them stripping when removing them at an angle) you can remove the feet by first removing the rubber pads on them (they are sticky glued) and then you can remove the screws holding them in, they are two screws holding the rear ones and only one screw on each of the front ones. After removing the screws the feet will easily pop off allowing you to get at the screws hidden underneath them. And as far as the part where he used a broken tweezer to separate the two halves I just used a skinny screwdriver and after finding the spots the tabs were in holding them together I just give it some good force in that general area with the skinny screwdriver and it popped the tabs out.
@Paceytron2 жыл бұрын
Thank you so much for the video! Would never have managed to get into it without this
@monikamonika84642 жыл бұрын
is it possible to replace or fix the stabilizers, it gets stuck on one side pretty often from gaming on it? thank you for the videoo keep up the great work!
@tdop2 жыл бұрын
Hello, I think you can unstick the rubber pads and under them could be the screws which hold them in place. There could be some dirt most probable and it will require only cleaning.
@flipper__2 жыл бұрын
Amazing video, thanks for putting in the effort!
@tdop2 жыл бұрын
Glad you enjoyed it!
@lesliepeters95013 жыл бұрын
DUDE! THANK YOU SO MUCH. I spilled a tiny bit of coffee in my keyboard and would never have figured out how to open up with case without this video.
@tdop2 жыл бұрын
You're very welcome!
@kfire70423 жыл бұрын
Thank you for this video. Do you know how to replace a lite that is no longer working? Thank you!
@tdop3 жыл бұрын
With pleasure. Yes, anything is possible, you will have to have soldering tools, the proper LED and some soldering skills. If you want to learn check our partner web site itesla.solutions go to forums and from there you can begin your journey.
@franktkachenko8103 жыл бұрын
I cannot believe I found this video. Helped me take apart my RCK to fix my right arrow key. There was some corrosion blocking the metal connectors on the switch from meeting the PCP board. Wouldn't have figured it out without your help. Thank you so much!
@tdop3 жыл бұрын
Hi, glad it helped to fix your keyboard, in fact this is a second video we made, the first video had bad quality and sound so we decided to remake it and here it is.
Пікірлер
Could you please do a short video on the separation of the two halves and where the 8 tabs are? I'm having the hardest time at that point (28:00-31:30). Updated: Nevermind! I got through with a screwdriver. Thanks for this video.
do you know if there is any tool to pair another mamba hyperflux mouse to the firefly hyperflux mat?
Did not know know of this, but was thinking recently what if the mouse damages, if it will be possible to replace with another, I think if there is a Chip ID it can be like in Apple devices, some IC responds for that ID, you would find a good mouse from other set and take the IC from yours and solder to the other. If you require further assistance join omtesla.com tech community.
Is it possible to fix the left click?
Thank you for documenting this.
My keyboard stopped working and it also won’t charge. I got my keyboard a bit more than a year ago so it has passed the warranty period. Mine however is a Bluetooth version. Do you have any idea about what could be the issue?
Thanks for the fantastic video man. I've been trying to find out if it would be possible to lube this keyboard in a simple manner, but now as I have seen the switches in detail, I think it doesn't make any sense.
To make removing the screws around the feet much easier (and not having to worry about them stripping when removing them at an angle) you can remove the feet by first removing the rubber pads on them (they are sticky glued) and then you can remove the screws holding them in, they are two screws holding the rear ones and only one screw on each of the front ones. After removing the screws the feet will easily pop off allowing you to get at the screws hidden underneath them. And as far as the part where he used a broken tweezer to separate the two halves I just used a skinny screwdriver and after finding the spots the tabs were in holding them together I just give it some good force in that general area with the skinny screwdriver and it popped the tabs out.
Thank you so much for the video! Would never have managed to get into it without this
is it possible to replace or fix the stabilizers, it gets stuck on one side pretty often from gaming on it? thank you for the videoo keep up the great work!
Hello, I think you can unstick the rubber pads and under them could be the screws which hold them in place. There could be some dirt most probable and it will require only cleaning.
Amazing video, thanks for putting in the effort!
Glad you enjoyed it!
DUDE! THANK YOU SO MUCH. I spilled a tiny bit of coffee in my keyboard and would never have figured out how to open up with case without this video.
You're very welcome!
Thank you for this video. Do you know how to replace a lite that is no longer working? Thank you!
With pleasure. Yes, anything is possible, you will have to have soldering tools, the proper LED and some soldering skills. If you want to learn check our partner web site itesla.solutions go to forums and from there you can begin your journey.
I cannot believe I found this video. Helped me take apart my RCK to fix my right arrow key. There was some corrosion blocking the metal connectors on the switch from meeting the PCP board. Wouldn't have figured it out without your help. Thank you so much!
Hi, glad it helped to fix your keyboard, in fact this is a second video we made, the first video had bad quality and sound so we decided to remake it and here it is.