Пікірлер

• 
  @T.R.S.8.05 күн бұрын

  Very cool

• 
  @thedefog6 күн бұрын

  shout out to my fellow 909 sisters. trans-binary electronic producer here.

• 
  @yukie-eq4gn17 күн бұрын

  I am female too

• 
  @johndaugherty412717 күн бұрын

  I happened on the Epiphone Victoria goldtop at my LGS. Went in for a strat, but my son walked over with that goldtop and I just had to leave with it. It has turned out to be the best Les Paul I have ever played. It is much better than my Gibson Classic. The Classic sounds great, but I love that '57 neck on the Epiphone.

• 
  @TheTL415Ай бұрын

  Do you take song requests? Perhaps a little Jeff Mills.

• 
  @user-xl6nj9og8lАй бұрын

  Very good teacher, i can keep up,lol

• 
  @HelgeRumphorst-nk6tgАй бұрын

  I like the Expander also, Saints very much😊

• 
  @anamarijasirmusicАй бұрын

  ❤

• 
  @robertsteinberger5667Ай бұрын

  it sounds too cold for me

• 
  @reflectingtreesАй бұрын

  Gibson Anaconda in person, is absolute killah.

• 
  @ianazhulavska2420Ай бұрын

  Female watching you! 😜

• 
  @auntjenifer77742 ай бұрын

  At 16:18 where do you get "epiphone branded aluminum tail piece" from ? None of the Epiphone factory tail piece are aluminum. Gibson in the other hand used light weight advanced plating that could be aluminum.

• 
  @ethannemeroff95382 ай бұрын

  My man down bad

• 
  @saymama56142 ай бұрын

  I have an old 490 T that measures around 7.1k. I wonder how it is possible when they are usually around 8-8.3k

• 
  @Pastor_Grant2 ай бұрын

  No gold top?

• 
  @DavidBloom-kq2pk2 ай бұрын

  I'm going to be late

• 
  @foggygreenfrost2 ай бұрын

  im just a girl

• 
  @StarsandBarsRecords2 ай бұрын

  No rest in peace for Mark Bell? Okay then.

• 
  @user-iv7yp1qs6v2 ай бұрын

  Nice review but that Gibson Appetite top is nice but the quality of flame is very low for figured wood. I would expect much better flame for a high end guitar.

• 
  @wce74wce153 ай бұрын

  Just got a 2004 with ebony board, just with dot inlays

• 
  @DisciplinedCommotion3 ай бұрын

  cheers thank you for this tutorial.

• 
  @SnDmsIIK3 ай бұрын

  I have 2 Gibson LPs, 2 Epi Lps (one Vermillion). I agree that in sound the Epis are in the ball park. For me I find my Epis more than pleasurable enough to play and perform with.

• 
  @tomguitar19634 ай бұрын

  Just got a Novemberburst 😎

• 
  @SuperDeadRooster4 ай бұрын

  Thanks for answering the most important question on the internet. 😅

• 
  @user-ob2nv8pp6f4 ай бұрын

  Mind-blower! thank you so much. I have try this on my (Behringer) MonoPoly.

• 
  @user-ob2nv8pp6f4 ай бұрын

  I tried it on the Behringer Monopoly, and yes it works. The LED on the Frequency knob of MG1 will show 'continuous red' instead of the fast flicker, as above. (because the Behringer LED runs faster than the Korg). But if you set the knob in between the wave forms, and listen to the sound, you hear it switch from a Square or Saw wave to a steady single-pitched frequency.' I found what really makes a difference for getting all those 'weird' sounds is putting the Transpose in the 'Up' position; also using the Square wave on the LFO/MG1. You get all kinds of weird noises in the Transpose Up setting. It gives you-not necessarily higher notes-but the higher Frequencies, where FM lives.

• 
  @DisciplinedCommotion3 ай бұрын

  same here

• 
  @kcsvantasticvoyages97294 ай бұрын

  Learned something new, ty

• 
  @rudetee4 ай бұрын

  Great explanation! I also got the TTSH . Also I had the modifications done so it’s more like the barp. Sync, divider and EG time scale switches.

• 
  @stevenkimsey70394 ай бұрын

  ☝️ Got one

• 
  @lucidekoningh4 ай бұрын

  Thanks for the video. Did people here actually try out to program these beats as explained in the video? If I do, I get completely different beats from the ones sounding in the video. You're missing some steps in your tutorial, and mix up terms like open and closed hi hats. A bit confusing...!

• 
  @TURBOKONGEN4 ай бұрын

  This one has ABR1 studs in the wood and Nashville bridge . Strange - never seen that before . I have three of these EBONY FB SG fadeds . One has ABR1 bridge studs in the wood and crescent moon inlays . The other two have Nashville bridges but with studs in incerts .

• 
  @pinkfluffeeunicorns5 ай бұрын

  Mine was definitely on the looser side because I lost the bushing and the screw to tighten the bushing 😢

• 
  @stewarttomkinson33565 ай бұрын

  In the 50s, Gibson didn’t make no difference

• 
  @DruNature5 ай бұрын

  I got a used sensation and its beautiful and sounds great! I will say that my fretboard is gnarly, at the 12th fret it gets very messy looking and there even appears to be some holes filled in by a couple of the frets. For me these things are inconsequential but as an expensive investment its a lil dissapointing.

• 
  @cocktailzombie5 ай бұрын

  Would love to own a gibson but i am happy with my 2 slash epiphones, as a primarily 80s hard rock and metal fan my other guitars are dean, ltd, edwards with thin necks and as a smaller guy the slash epihones feel like holding tree trunks, not unplayable but i so much prefer the necks on my epihone Zack wylde bullseye.

• 
  @mimtirona96225 ай бұрын

  Idiot don't waste people's time. Ptu!

• 
  @mrtonysantos5 ай бұрын

  360p? seriously?

• 
  @mofomartianpАй бұрын

  lol

• 
  @GeorgeHeil-gg6wv6 ай бұрын

  Those are some bad assed tops ! No pick guard hiding that wood.

• 
  @TimmyHellhammer6 ай бұрын

  Excellent walk through! Still to date now in 2024 I still consider myself dawless minus a few small synth apps on 4 separate tablets each having their own channel on a multi board. Step sequence will never be replaced in my method as those drum machines are still in my regular setup.

• 
  @davebarone5066 ай бұрын

  One thing nobody ever mentions, is that the Bridge pup, should be hotter, not to make it louder but because there is less string movement the closer you get to the bridge, thats where you ned tge extra pickup power. Now at the neck the string movement is considerably more, so a colder pup will match better. Then of course the different valu capsgives a different sound too

• 
  @sxj26506 ай бұрын

  Nice tutorial though. Vogue, no snare? Two times closed hhat?

• 
  @amonster8mymother6 ай бұрын

  I am programming 909 samples into my s2000 i wonder if i can make these loops in my s2000?

• 
  @tomusic88876 ай бұрын

  I wanted to know how big the neck was for your handnot hong long the fret distances are 😂😂😂 🤷🤷🤷🤷

• 
  @pipsix6 ай бұрын

  I’m also a female. I have a rd-9 I’m learning to use. :-) thanks for the demo on the og machine. Awesome

• 
  @user-ly5ev6hx8e7 ай бұрын

  127???? PUKU PUKU PAW PAW

• 
  @alanjackman22967 ай бұрын

  Can't understand why someone would want multiple versions of the same thing unless you're gonna hang it backwards on a wall I would rather have some art and better guitars

• 
  @JWCFB7 ай бұрын

  Gibson November No. 1 Epiphone appetite number two

• 
  @linkbros217 ай бұрын

  great review but why the 360p quality

• 
  @volt7cooltangs7017 ай бұрын

  My SCi Pro One rocks harder than any 10:33 synth I know. The filter is so strong and the envelopes so quick it’s unreal. Love triggering the built in Sequencer via the external clock in with a Roland TR-08 / 707 / 06 / DR-110 drum machine. No wonder it’s Vince Clarke’s favourite synth of all time.

• 
  @CarsGuitarsAudio7 ай бұрын

  I have the Not Dead Yet and found it to be a great instrument. People complained about the setup but thats adjustable and everyone has different preferences .Overall i felt it was worth the 1300 .Also The finish is actually far more durable than the Gibsons although I am addicted to the smell of a new Gibson coming out of the case ...and Im broke because of it.

• 
  @KazeKitsune7 ай бұрын

  I'm female and an amateur EDM producer.