ouch a fork connector into female spade connector come on use proper connectors !
@roberttempest634Ай бұрын
Hello, i am looking at putting a light bar on a 93 chevy suburban. Eather in the door jam like in the video or on a roof rack on the front. Do you get a nasty glare if you have it in the door jam ? Anything i should know before installing? Its a off road SUV so looking pretty is not a concern
@wackpool14912 ай бұрын
I just learned this with my last custom paint job. It is soooo coool when u done it right :)
@williamstephens7373 ай бұрын
How do you keep the braket in the door
@CultureJack4 ай бұрын
When you use the valve port, you eliminate being able to use the fleece lined pocket. Bad routing. It should pop out right next to the strap so there are no kinks. Other than that, it's a great bag.
@uscangela105 ай бұрын
I just had one installed using the same brackets. Mine is leaking like crazy around the weather stripping and there is wind noise. This doesn’t seem right. Any suggestions??
@TheRoninChronicle4 ай бұрын
hey there, i never had any leaks but maybe some black RTV sealant could help? and for the wind noise I used gorilla tape on the fins on top of the bar and it seemed to help. still had a lot of vibration but i got used to it lol. after 5 years of having it on I decided to remove it since i never went off road anymore
@andkom27045 ай бұрын
How big should the resistor be?
@EDC3DP5 ай бұрын
Know anywhere to get these hid's now?? Links don't work😢
@jorgerafaelmariatavarez5045 ай бұрын
brother re-check the links, it redirects to a chinese porn site
@JoseJimenez-me5fq5 ай бұрын
Hello Ronin, I am getting ready to replace all my drive belts. I just watched about ten videos before coming across yours. Thank you for making this great video it was very informative.
@TheRoninChronicle5 ай бұрын
Thank you so much! I apreciate the comment, im so glad its helping people still! 👍👍😎💯
@salvatere5 ай бұрын
Ja best video , on KZread
@andyanderson77125 ай бұрын
This is the type of music youd hear while watching them process cocaine in the jungle.
@rcprod96315 ай бұрын
Would you mind telling me the output voltage of the power adapter?
@biggusdickus89926 ай бұрын
Really cool! Looks like a Zaku II that got a Nuka Cola paint job
@reidenjohnson6 ай бұрын
How is the light coming into the cabin? Is it harsh? Seems like there has to be some sort of bleed into there
@jetirex7 ай бұрын
Thank you for this! Ended up removing the airbox whilst trying to tension the alternator belt as the tensioner is a PIA to get to.
@dhamongrimwulfe54017 ай бұрын
Been building a bit. Have a resin kit fixed to the mg 2 zaku and had a whole color scheme. Your work has me wanting to try candy. Awesome and beautiful
@jayseee12847 ай бұрын
Where do u buy the bracket?.thanks
@someoneyouprobablydontknow27577 ай бұрын
Ha. I commented here a little over 5 years ago when I was 13. Nice to see you're still helping people out! Im 19 now. Still got that 4runner. Gonna be working on it some more pretty soon for plugs and coils. Got my own tools and supplies now, but I wont forget this video guiding me through my first major part replacement on that car. Thanks again!
@TheRoninChronicle5 ай бұрын
Thats awesome! Haha so cool to hear that, I apreciate you coming back to comment again haha very cool!
@killerguch10498 ай бұрын
How did you fix the wind noise from the door jam
@AWIRELINK8 ай бұрын
Bro, this is by far one of the BEST video for this project. You simplified everything perfectly. Thank you.
@exceleratorjoshua9 ай бұрын
Bro your video helped me out soo much. I did all my belts because my alternator belt was squealing. Took 2 hours to do it but I'm happy with results.
@TheRoninChronicle9 ай бұрын
thats awesome! glad to hear its still helping people out. thanks for the comment, i appreciate it!
@SuckItYouTube1910 ай бұрын
I see YOU redid all your heat shrink at the bracket. 🤣🤣🤣🤣 I know WHY.
@horrordiario299311 ай бұрын
is that a especific paint?
@TheRoninChronicle11 ай бұрын
Hello, i created it myself using black primer, gloss black, chrome, then clear red. All mr color brand except the chrome was alclad
@horrordiario299311 ай бұрын
@@TheRoninChronicle ooooow. nice, man! thanks for the tip
@josesantiago324511 ай бұрын
🔥🔥🔥🔥🔥🔥
@greggbiebelhausen841411 ай бұрын
Awesome video! Thank you so much for doing that. I completely understand how the alternator is mounted now. Thank you again!
@marcelsorger255911 ай бұрын
It’s a great all around pistol kzread.infoUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ , doesn’t fit in plastic glock 19 holsters but will fit in some non plastic ones. The location of the safety isn’t very good because your finger will accidentally activate it but it can easily be removed by pulling on both sides at once. Don’t lose the red o-rings while doing that.
@michaelhuynh819511 ай бұрын
you a genius with the tape
@user-il6tw7hi7h Жыл бұрын
More upgrades to consider. I have a 2019 4Runner Off Road addition. I have Diode Dynamics amber fog lights (Pro) and Artec Industries front bumper with a winch.
@kingofmonsterisland4968 Жыл бұрын
That’s a cool candy coated red
@jasperjohntemblor1686 Жыл бұрын
Did you use clear red on top of gloss black?
@nanomachines2985 Жыл бұрын
That candy apple red l is phenomenal
@TheRoninChronicle Жыл бұрын
Thank you so much! It was my first time doing it too. I love the way it turned out, thanks for watching!
@matthewmalandruccolo97 Жыл бұрын
I shed a tear
@TheRoninChronicle Жыл бұрын
Haha thank you! You can do it too! This was my first time, you will be amazed when you do.
@kyleyu9816 Жыл бұрын
It's pretty good 👍
@TheRoninChronicle Жыл бұрын
Thank you!
@alexcesca166 Жыл бұрын
bonjour ou avez vous trouver les support sans percage pour tenir la barre led svp?
@MrSims-ky2ne Жыл бұрын
Built to last duralast!
@wildwildsouth-ZA Жыл бұрын
Sample footage of V1P 4K Dual Channel kzread.info/dash/bejne/fHWD2sWvmKXbk5M.html / kzread.info/dash/bejne/iqN5lK6cY5e2gsY.html
@kahakav6243 Жыл бұрын
Definitely one of the most helpful videos Ive ever watched on this platform. Ever. 😂👍🏾
@silverbloodborne9495 Жыл бұрын
Its all fun and games until you realized you missed a step
@theboogerbeater Жыл бұрын
Fucken looks sick! Props
@TheRoninChronicle Жыл бұрын
Thank you very much! I apreciate that!
@riyaandrayplay6856 Жыл бұрын
Do the brackets work with all vechiles?
@TheLupopovich Жыл бұрын
Phenomenal, absolutely phenomenal. Thank you
@kane5645 Жыл бұрын
I love these older kits. Sure it's simple, but the cheap cost just allows you to put in a few paints and a new matt can for a really great custom.
@jtl6713 Жыл бұрын
I noticed you ran the wire from the bottom up for the power. Seems like it would be difficult to ensure you had just enough wire and no extra when you got to the top.
@RichardSmith-ic1zw Жыл бұрын
you aren't got to do all that just connect them to your fog lights and change out the fuse and get a bigger one that's what i did and it looks and lights up awesome.
@andyjame2978 Жыл бұрын
Easy peasy- and it works!!
@user-de8oi1td2o Жыл бұрын
Nice and easy
@choppys223 Жыл бұрын
Not advisable to run without rubber covers. Moisture and dust will get into the headlight causing the glass globes and reflector bowls of the projectors to haze reducing output over time.
Пікірлер
ouch a fork connector into female spade connector come on use proper connectors !
Hello, i am looking at putting a light bar on a 93 chevy suburban. Eather in the door jam like in the video or on a roof rack on the front. Do you get a nasty glare if you have it in the door jam ? Anything i should know before installing? Its a off road SUV so looking pretty is not a concern
I just learned this with my last custom paint job. It is soooo coool when u done it right :)
How do you keep the braket in the door
When you use the valve port, you eliminate being able to use the fleece lined pocket. Bad routing. It should pop out right next to the strap so there are no kinks. Other than that, it's a great bag.
I just had one installed using the same brackets. Mine is leaking like crazy around the weather stripping and there is wind noise. This doesn’t seem right. Any suggestions??
hey there, i never had any leaks but maybe some black RTV sealant could help? and for the wind noise I used gorilla tape on the fins on top of the bar and it seemed to help. still had a lot of vibration but i got used to it lol. after 5 years of having it on I decided to remove it since i never went off road anymore
How big should the resistor be?
Know anywhere to get these hid's now?? Links don't work😢
brother re-check the links, it redirects to a chinese porn site
Hello Ronin, I am getting ready to replace all my drive belts. I just watched about ten videos before coming across yours. Thank you for making this great video it was very informative.
Thank you so much! I apreciate the comment, im so glad its helping people still! 👍👍😎💯
Ja best video , on KZread
This is the type of music youd hear while watching them process cocaine in the jungle.
Would you mind telling me the output voltage of the power adapter?
Really cool! Looks like a Zaku II that got a Nuka Cola paint job
How is the light coming into the cabin? Is it harsh? Seems like there has to be some sort of bleed into there
Thank you for this! Ended up removing the airbox whilst trying to tension the alternator belt as the tensioner is a PIA to get to.
Been building a bit. Have a resin kit fixed to the mg 2 zaku and had a whole color scheme. Your work has me wanting to try candy. Awesome and beautiful
Where do u buy the bracket?.thanks
Ha. I commented here a little over 5 years ago when I was 13. Nice to see you're still helping people out! Im 19 now. Still got that 4runner. Gonna be working on it some more pretty soon for plugs and coils. Got my own tools and supplies now, but I wont forget this video guiding me through my first major part replacement on that car. Thanks again!
Thats awesome! Haha so cool to hear that, I apreciate you coming back to comment again haha very cool!
How did you fix the wind noise from the door jam
Bro, this is by far one of the BEST video for this project. You simplified everything perfectly. Thank you.
Bro your video helped me out soo much. I did all my belts because my alternator belt was squealing. Took 2 hours to do it but I'm happy with results.
thats awesome! glad to hear its still helping people out. thanks for the comment, i appreciate it!
I see YOU redid all your heat shrink at the bracket. 🤣🤣🤣🤣 I know WHY.
is that a especific paint?
Hello, i created it myself using black primer, gloss black, chrome, then clear red. All mr color brand except the chrome was alclad
@@TheRoninChronicle ooooow. nice, man! thanks for the tip
🔥🔥🔥🔥🔥🔥
Awesome video! Thank you so much for doing that. I completely understand how the alternator is mounted now. Thank you again!
It’s a great all around pistol kzread.infoUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ , doesn’t fit in plastic glock 19 holsters but will fit in some non plastic ones. The location of the safety isn’t very good because your finger will accidentally activate it but it can easily be removed by pulling on both sides at once. Don’t lose the red o-rings while doing that.
you a genius with the tape
More upgrades to consider. I have a 2019 4Runner Off Road addition. I have Diode Dynamics amber fog lights (Pro) and Artec Industries front bumper with a winch.
That’s a cool candy coated red
Did you use clear red on top of gloss black?
That candy apple red l is phenomenal
Thank you so much! It was my first time doing it too. I love the way it turned out, thanks for watching!
I shed a tear
Haha thank you! You can do it too! This was my first time, you will be amazed when you do.
It's pretty good 👍
Thank you!
bonjour ou avez vous trouver les support sans percage pour tenir la barre led svp?
Built to last duralast!
Sample footage of V1P 4K Dual Channel kzread.info/dash/bejne/fHWD2sWvmKXbk5M.html / kzread.info/dash/bejne/iqN5lK6cY5e2gsY.html
Definitely one of the most helpful videos Ive ever watched on this platform. Ever. 😂👍🏾
Its all fun and games until you realized you missed a step
Fucken looks sick! Props
Thank you very much! I apreciate that!
Do the brackets work with all vechiles?
Phenomenal, absolutely phenomenal. Thank you
I love these older kits. Sure it's simple, but the cheap cost just allows you to put in a few paints and a new matt can for a really great custom.
I noticed you ran the wire from the bottom up for the power. Seems like it would be difficult to ensure you had just enough wire and no extra when you got to the top.
you aren't got to do all that just connect them to your fog lights and change out the fuse and get a bigger one that's what i did and it looks and lights up awesome.
Easy peasy- and it works!!
Nice and easy
Not advisable to run without rubber covers. Moisture and dust will get into the headlight causing the glass globes and reflector bowls of the projectors to haze reducing output over time.
*Easy to setup and maintain.*
Is the LED panel loud while driving?