Пікірлер

• 
  @carloshernandez-kn3ci5 сағат бұрын

  is there a tune needed for this ?

• 
  @SBFilters5 сағат бұрын

  @@carloshernandez-kn3ci no tune needed

• 
  @absolute.freedom9 сағат бұрын

  Does adding this require a tune or upgraded (less restrictive) exhaust?

• 
  @SBFilters9 сағат бұрын

  @@absolute.freedom no it does not

• 
  @thekingsilverado326613 сағат бұрын

  Why don't I ever get to work on vehicles that clean????

• 
  @thekingsilverado326613 сағат бұрын

  As I look where the hose is supposed to go off the filters I can suggest to folks something I do to every new fuel tank I get my hands on is I order the drain cock Dorman sells not that I am at all fond of Dorman products anymore the drain cock really helps out when removing the tank again which becomes inevitable with the amount of rust these trucks get makes it much nicer to connect a hose and just drain it all out.

• 
  @MrCquixote23 сағат бұрын

  how does this work with a fass fuel pump? do they play nicely together?

• 
  @fme5686Күн бұрын

  wait up for it LOL

• 
  @mikeschlup52792 күн бұрын

  What is the tank used for? Camper build?

• 
  @SBFilters2 күн бұрын

  @@mikeschlup5279 yes

• 
  @juliam.10172 күн бұрын

  Turn of music please Also, it’s not clear how to align sending unit with the fuel tank. But anyway, thank you for the video!

• 
  @Torqu3d2 күн бұрын

  Why did you guys stop making body mounts for GM after 2014.

• 
  @autonomous_collective3 күн бұрын

  Very intresting.... Include parts list with install video.

• 
  @richardneufeld77013 күн бұрын

  Does this fit on the 2022 6.6 model

• 
  @SBFiltersКүн бұрын

  @@richardneufeld7701 yes it does

• 
  @davekaylor4583 күн бұрын

  Nice job! CAn you do a video on changing the filter?

• 
  @ArthurKlisiewicz4 күн бұрын

  "give us a call" ? where ? where is the number ? I cannot find one on your website !

• 
  @SBFilters4 күн бұрын

  @@ArthurKlisiewicz it’s on the bottom 9099470015

• 
  @willwilliams74914 күн бұрын

  Hi, It appears that the part # you showed for the PCV hose is for a Mustang. Is there an update for that? Also, if you have the electronic piece on that hose, could it be spliced into the hose that S&B provides? Thanks!

• 
  @randomstuffwithnofluff74724 күн бұрын

  As I mentioned in another video, if I had to do this again, here is a tip for people installing this on your Jayco Terrain, Entegra Launch and probably the Winnebago Revel. I would buy a longer piece of fuel line for your aux heater fuel pickup tube that goes into the tank so it extends closer to the bottom of the sending unit, since you'll now have more fuel in the tank as a failsafe to keep your heater from using up all your fuel. I wish S&B would at least mention this as an option so you wouldn't have to remove your tank again to do this mod. Also for people with Sprinters without heaters, you might want to go ahead and install a fuel pickup hose for the future since you have the tank off.

• 
  @randomstuffwithnofluff74724 күн бұрын

  If I had to do this again, here is a tip for people installing this on your Jayco Terrain, Entegra Launch and probably the Winnebago Revel. I would buy a longer piece of fuel line for your aux heater fuel pickup tube that goes into the tank so it extends closer to the bottom of the sending unit, since you'll now have more fuel in the tank as a failsafe to keep your heater from using up all your fuel. I wish S&B would at least mention this as an option so you wouldn't have to remove your tank again to do this mod. Also for people with sprinters without heaters, you might want to go ahead and install a fuel pickup hose for the future since you have the tank off.

• 
  @jasonhansen7884 күн бұрын

  I can't even get to the video due to all the commercials. Dislike, sorry bro. I gave up after the 4th one.

• 
  @SBFilters4 күн бұрын

  @@jasonhansen788 we don’t ask or get money for commercials. Thats KZread

• 
  @billfelinski24284 күн бұрын

  I'm getting conflicting information on ecommerce sites and this video on which vehicles this will fit. I have a 2022 Sprinter 170 Dually with a receiver hitch. In this video I hear it will fit. Can I please get confirmation? Thank you!

• 
  @SBFilters4 күн бұрын

  @@billfelinski2428 it will fit with oem hitch

• 
  @hamptongraves67615 күн бұрын

  Just waiting on mine to come off back order !

• 
  @autonomous_collective5 күн бұрын

  🤙..

• 
  @autonomous_collective5 күн бұрын

  🤙

• 
  @aldoyamy096 күн бұрын

  After installation i keep on getting the p0106 code! I checked all connections and it all looks good! Any help??

• 
  @markknights79057 күн бұрын

  What’s the torque spec for 1999 Chevy Silverado 1500 4wd?

• 
  @SBFilters7 күн бұрын

  @@markknights7905 we don’t make them for 1999

• 
  @markknights79057 күн бұрын

  @@SBFilters I understand. I just need to know the torque spec for the bolt. If you have torque specs for 2000 till 2004 Chevy Silverado 1500. That will be good

• 
  @markknights79057 күн бұрын

  Or even for 2006 Chevy Silverado 1500 cab mount bolt

• 
  @SBFilters7 күн бұрын

  @@markknights7905 63 ft lbs

• 
  @markknights79057 күн бұрын

  @@SBFilters alright appreciate it.

• 
  @soumikg8 күн бұрын

  How should I interpret the gas gauge after the J51 code is installed? Does the gauge measure my 40G tank and drop accordingly OR, per some of the comments above will only start dropping once it reaches the OEM gas line 24g? Appreciate your input here.

• 
  @williampaskewitz53839 күн бұрын

  Left side would be lower right,

• 
  @jameyhugget56969 күн бұрын

  That’s a huge tank

• 
  @goldbricks255310 күн бұрын

  What are the hp gains

• 
  @unclebilly135310 күн бұрын

  At what point does it not make sence. That extra fuel ,cost to haul it around?

• 
  @ReyMex-oy6ot11 күн бұрын

  Thanks for the video

• 
  @marckodiak851311 күн бұрын

  Great video , about to purchase your product , this level of support creates customers. Thanks guys I will let you know how it goes…Murphy hates me soooo 😂

• 
  @m7alhazmi34611 күн бұрын

  Really thank you

• 
  @wtfmotovlog11 күн бұрын

  I love how she didn’t show how she got the long tube onto the turbo. I can’t fit my sausage fingers in there to get that on the turbo at all

• 
  @brandontobias434113 күн бұрын

  Just installed this on my 2023 JT High Altitude, check engine light came on, and ideas?

• 
  @NathanFromme13 күн бұрын

  Holy shit it’s actually a cold air set up. Good shit. Most people delete the factory cold air intake for an engine bay hot air intake. It’s really bad for diesel.

• 
  @freddymakesstuff684613 күн бұрын

  Nice set up. You should try to get a fuel bowl delete kit too.

• 
  @FabianGarcia-ut9pf14 күн бұрын

  When is this going to be released?

• 
  @timjin915614 күн бұрын

  Why additional vent is needed?

• 
  @SBFilters13 күн бұрын

  @@timjin9156 because the tank is longer and it needs the vents to vent in 360 degrees of pitch.

• 
  @mnedennis15 күн бұрын

  I have 2024 1500 3.0 High Country. The tube to turbo is virtually impossible to attach, not as easy as she makes it look. I worked on it for 3hours or more, there just isn’t enough room. I called S & B technical support, the technician was basically worthless. I reinstalled the stock tube very easily.

• 
  @larryphillips416416 күн бұрын

  Don’t buy the K&N cold charge pipe kit, it’s bs. They trying to save money by not making the little rubber elbow piece too short by 1/2” and the metal clamps are 1/2” too short as well. Fucking hell cmon K&N. I’ll give you $5 more dollars to not make this shit a struggle fest!!!

• 
  @SBFilters16 күн бұрын

  @@larryphillips4164 we are S&B

• 
  @JAlan-ow3fe16 күн бұрын

  What a fkn hack ass video. 😂😂😂😂😂. I would never buy anything from these guys after watching this

• 
  @thelifeoffastony115716 күн бұрын

  People, stop wasting your money on products like this.. if you remove your filter and clean it out after ride at end of the day you'll be fine..

• 
  @SBFilters16 күн бұрын

  @@thelifeoffastony1157 this is one of the most popular utv accessories and has saved engines and tons of $ on filters. If you don’t like in the desert or dust than you are correct

• 
  @louistiches481016 күн бұрын

  How is it cold air, if the intake is in the same location?

• 
  @tankthefrank295817 күн бұрын

  Does the plug for the airbox come with the kit or does it need to be purchased separately?

• 
  @gtrance356718 күн бұрын

  No sound?

• 
  @adhominemcee19 күн бұрын

  What is the best approach for putting these on an excursion?

• 
  @flow118019 күн бұрын

  You can remove the bolts from the radiator mounts through the head lights with a wrench and impact at the bottom

• 
  @craigt599019 күн бұрын

  I installed a S&B on my ‘21 Sport. At the same time I installed a cat back exhaust by Carven. my butt dyno tells me I have noticeably more horsepower and the computer tells me I have gone from barely 18 mpg to 21 mpg. Definitely worth the money, time and effort.

• 
  @PaDutchRunner22 күн бұрын

  Is the plastic food grade and BPA free?

• 
  @SBFilters21 күн бұрын

  @@PaDutchRunner yes sir

• 
  @PACK-ge5gu22 күн бұрын

  How do you get the clips off of the sensor with out breaking?

• 
  @leblancexplores23 күн бұрын

  Know anyone running both sides an RV? Seems like a good use of space but I’ve never seen anyone running 68gallons!!