Пікірлер

• 
  @MarvFitBikesKicksКүн бұрын

  Thank you so much for doing this

• 
  @KVMerry8 күн бұрын

  I watched the whole video but didn't realize I have same bike until the end

• 
  @jrlundman10 күн бұрын

  The deluxe also has full wheel fenders. The slim has much smaller chopped wheel fenders.

• 
  @simongilbert270410 күн бұрын

  the fatboy looks a mess , slim is the new fatboy ;;

• 
  @lindsayswett557616 күн бұрын

  Can you post a video on how to remove and replace the battery?

• 
  @drwrly806018 күн бұрын

  Man, whole lot more tech in there than my 20 year old sportster. Thanks for the run down. other than tires, I'm the only one that has taken a wrench to the bike.

• 
  @lewiscole-l2g19 күн бұрын

  awesome video, helped me a lot. thank you

• 
  @aztriumphster19 күн бұрын

  @@lewiscole-l2g my pleasure. Be safe out there

• 
  @MadMathMike27 күн бұрын

  It's maybe a bit extreme, but do you see any opportunity of rerouting the air intake to the front instead of the side?

• 
  @DaveGme28 күн бұрын

  New sub, liked, and bell rung. ‘19 FXFBS owner looking at some of your mods. Seriously considering buying a second one and going different directions with both. Mids and raise one, and forwards, t-bars, and slam the other. Great content.

• 
  @robertvilliard3402Ай бұрын

  Could you drill big holes in the airbox for more air too. ?

• 
  @aztriumphsterАй бұрын

  Wouldn't recommend it. That would be un filtered air

• 
  @rakkasanveteran1619Ай бұрын

  I removed and replaced the trans cover with an aluminum vented cover. Not a fan of plastic on super heated surfaces

• 
  @AlessioR.Ай бұрын

  Ciao. Cambiando il filtro aria. Hai avuto errori poi sul display? Io sì sul mio Nightster special 2023, sostituendo solo terminale scarico. Con S&S Gran national. Bel video!

• 
  @aztriumphsterАй бұрын

  Hello. No, I did not have any errors on the display. Thank you.

• 
  @141641aАй бұрын

  2 fat bobs and 1 fat rob. Haha jkjk

• 
  @LonghardshepardАй бұрын

  I love the green

• 
  @kenw30Ай бұрын

  I’m around 5’7” and I’m a bit leaned forward more than I like. What do you recommend handlebar wise that can help me keep my back more straight ? I have a 23 bobber 111. Also what parts do you offer that you personally like and would add ? Very interested !

• 
  @HarpreetBraich-vt4zyАй бұрын

  hey bud where you get this bag from?

• 
  @aztriumphsterАй бұрын

  Directly from Viking Bags

• 
  @laydann48892 ай бұрын

  did you end up changing the front brake line with a new bar setup? Is it as simple as what you said as to just get a straight banjo to go on the abs module and a fitting on the reservoir and a custom threaded line? Trying to figure it out on my fiances new 2023 and no dealer ive called seems to have a clue. 10mm x 1.00 banjo bolts seem to be what is on it but I havent actually taken them off to check yet.

• 
  @aztriumphster2 ай бұрын

  Yes, I used a goodridge Universal line with a straight banjo coming off the ABS module

• 
  @Domzarconejr152 ай бұрын

  Where’s the damn diagnostic port!? I’m losing my mind!

• 
  @imsurly77422 ай бұрын

  I'm 6'3" and have a 22 RKS. The width of the bars drove me crazy and switched out to narrower Moto bars with 8" inch risers. She fits like a glove now.

• 
  @infini19702 ай бұрын

  Thank you for the review. I think your opinion in the end is correct. Should be a little cheaper over all. However I think if it was adjustable it would be maybe 2-3 times more money. I think it's a big ask. But cool idea!

• 
  @RomeroFamilyFunChallenge2 ай бұрын

  I sense a trade-in coming...

• 
  @Pinozcyclezandridez2 ай бұрын

  Is the device married to the bike?

• 
  @aztriumphster2 ай бұрын

  Yes, although you do not have to keep it on the bike when u ride.

• 
  @boxer1009bm2 ай бұрын

  Do you drain out all the gas in the tank?

• 
  @aztriumphster2 ай бұрын

  No need

• 
  @DirtyMikeReturnToMonke2 ай бұрын

  bruh ur facial hair is dope

• 
  @Reliczb2 ай бұрын

  I wish they could sound like the 600s sound so nice these sound like a four wheeler dirt bike

• 
  @libras3222 ай бұрын

  Amazing bike I love the xr concept hopefully we get to see a one year update on overall ownership of this bike don't know if you will see this but thank you for sharing with us the community definitely a top ten in my book just on the looks alone

• 
  @myakeiffer43272 ай бұрын

  I thought you’d actually teach me how to rebuild the carb lol.

• 
  @dadlife73752 ай бұрын

  Where did you get the handlebar shims

• 
  @aztriumphster2 ай бұрын

  From Harley

• 
  @alanbstard42 ай бұрын

  the lack of ground clearance on both is criminal. Need more ground clearance for greater lean angle

• 
  @synonyx3 ай бұрын

  Thanks for the tip on the adjuster! - I was wondering if that would pull out easy or not.

• 
  @Jluck783 ай бұрын

  I want to know which one handles the twisties better, which one is more composed when you are scrapping the pegs. I have ridden sport bikes for over 20 years and know I have moved onto Harley’s. I find it near impossible to find a real world review where they discuss handling issues. Let’s face it, 32 degrees of lean angle is not much, it’s normal to expect that the average rider will use all of it up.

• 
  @aztriumphster3 ай бұрын

  The Softail far out handles the Dyna from the factory. During the time that I owned my Softail Fat Bob I added an extension to the rear shock lifting the rear an inch. You can also slide the fork tubes down about a half inch elevating the front slightly. Those 2 mods plus a set of mid controls and ull have urself a fun bike to ride that performs well in the twisties.

• 
  @Jluck783 ай бұрын

  @@aztriumphsterthanks for the info, I appreciate it. I was finding it hard to get real world info about handling, this is helpful. I am leaning towards the Dyna chassis Fatbob simply because of the lower cost. I had to replace the suspension on my other Harley’s, I just assume this one will need a set of aftermarket emulsion shocks like Ohlins or Legends (just the basic shocks with rebound adjustment does wonders), stiffer fork springs and thicker oil. I think this might do the trick.

• 
  @wallylasuer68863 ай бұрын

  I did a stage 2 on my 2021 RG and I left the stock air box because I like the look. I installed the Arlen Ness Big Sucker oval air filter that’s 1/4” wider than stock. It looks better than stock doesn’t break the bank and they estimate like 3% more HP. I don’t know I really don’t notice any difference power wise but When I twist the throttle I notice hearing the air pulling in a bit.

• 
  @Stevvros3 ай бұрын

  Looks and sounds great 👍. Did you have an install video of the suspension ?

• 
  @heather_hunee3 ай бұрын

  I have a 2023 Nightster special I am trying to install the security siren. can you do a tutorial on that? Instructions it came with suck!! Thank you!

• 
  @stevenburton79223 ай бұрын

  Beautiful

• 
  @elchinolavida4 ай бұрын

  I have the 2024 Nightster Special and I can’t wait for you to show tutorials on replacing the pipes. This current 2-to-1 does not sound loud at all.

• 
  @skthagreat83133 ай бұрын

  Easy process use a wood block when you take it off

• 
  @BruCy-to5cq4 ай бұрын

  Very nice

• 
  @infini19704 ай бұрын

  So man so many parts that could offer performance gains in some way. I just got my 2023 LRS. 300 miles and I feel like I should. It be worrying so much lol. How do you feel about this a couple of years later? What would you recommend to me?

• 
  @amazingrudys54574 ай бұрын

  What are the frame sliders you have on the shocks?

• 
  @Nucklehead-mm9gf2 ай бұрын

  Did you ever find out what brand or where to get those frame sliders for the Nightster?

• 
  @amazingrudys54572 ай бұрын

  @@Nucklehead-mm9gfno I have not yet

• 
  @Nucklehead-mm9gf2 ай бұрын

  @@amazingrudys5457 OK thank you.

• 
  @amazingrudys54572 ай бұрын

  @aztriumphster What are the frame sliders you have on the shocks?

• 
  @wesleybaughman96534 ай бұрын

  I like the way the big sucker looks but it sounds like crap

• 
  @stevec68384 ай бұрын

  A vance and hines is far easier and more user friendly than this

• 
  @dgyoungphotos4 ай бұрын

  I’m in AZ too and I’m getting ready to do this as well.

• 
  @aztriumphster4 ай бұрын

  What part of AZ r u in?

• 
  @dgyoungphotos4 ай бұрын

  @@aztriumphsterglendale

• 
  @dgyoungphotos4 ай бұрын

  @@aztriumphsteralso, the freak screw head snapped off on me when I was trying to swap the fuel line.

• 
  @AaronStrumpel4 ай бұрын

  Hows the KZ shaping up? Loved the series up to here 👏👏

• 
  @galacticgamer30284 ай бұрын

  Please do more content on this bike I recently got mine, the 23 S edition and want to upgrade it more but am clueless as it’s my first bike.

• 
  @robw37614 ай бұрын

  How's it going I just put kodlin extension on my 2018 fatbob chose that instead of bunking also I lowered my fork tubes which brings the front up because you need to do this when changing the Geometry did you ever end up doing it to yours I live in Arizona as well not far from arrowhead HARLEY

• 
  @aztriumphster4 ай бұрын

  Hello. It's going well. Yes, I did end up raising the front. There's some HD demos out at Roadrunner Harley this weekend. I'll be there Saturday to take out a couple of the 2024s.

• 
  @robw37614 ай бұрын

  @aztriumphster OK hopefully I can make it out I'm taking it you still have your FATBOB

• 
  @robertmixter40505 ай бұрын

  Maybe you can help me out. My 19 ultra bought brand new had harley map and tune for scream egale ventilator and some generic slip ons. I recently upgraded to a bagger brother true daul head pipes and bassani dnt mufflers. Is there a way to tune for my set up i have the tuner from when i purchased the bike from harley.

• 
  @aztriumphster5 ай бұрын

  Hello, if it's a Screamin Eagle tuner, you should be able to follow the steps in the video and select a generic map that caters more to your current setup. However, I think your setup would still be considered a stage 1. So you could leave the current map and just use the smart tune feature to gather more riding data and apply it so the bike runs more efficiently.

• 
  @robertmixter40504 ай бұрын

  Thank you

• 
  @AlDoggyDogg5 ай бұрын

  I have a 2014 FXSB. I traded a 2019 Fat Bob and I specifically wanted a twin cam over the M8. They sound great and run phenomenal. The M8’s might be more efficient, but it takes a lot to get them to sounding the right way for me. I can’t feel a difference in real world riding comparing the two, but I do agree that the 2014 feels hot. My 2002 TC doesn’t feel the same heat wise so maybe I just need a tune.

• 
  @SportyJason5 ай бұрын

  Nice I am out in AZ too, I ride a 21’ sportster

• 
  @aztriumphster5 ай бұрын

  Awesome Man! I just subbed ur channel. What part of AZ r u in?

• 
  @SportyJason5 ай бұрын

  Tempe, right now I’m out in Pennsylvania, ill be back in AZ in 3 weeks, maybe we can go for a cruise then@@aztriumphster

• 
  @aztriumphster5 ай бұрын

  @@SportyJason for sure. Hit me up.

• 
  @jimjersey23455 ай бұрын

  What type of check valve is needed for this venting modification ?? And is a check valve necessary ??

• 
  @bobhat20015 ай бұрын

  The only thing I can say is that you didn’t back up the stock tune