Maybe you should have had your wife rev it for you. 🤣🤣
@BowtieSpecialties Жыл бұрын
yep...
@haydenleach7712 Жыл бұрын
What rocker arm ratio?
@VW69Baja2 жыл бұрын
What cam are you running? Sounds great!
@ninesixx2 жыл бұрын
It had a comp roller 288hr-10. Now it has a totally different setup built for nitrous
@jaybright67743 жыл бұрын
Wat kind of cam
@mathewmaldonado35704 жыл бұрын
Nice rides
@myhotrodtv4 жыл бұрын
Great coverage of a kool show. Thanks for sharing. Oh by the way I just became your 149th subscriber
@gutychavez60584 жыл бұрын
Were is nu trend car club
@ARTGEEZY4 жыл бұрын
Dope video my hometown Salas always shows up! Thanks for sharing!
@thatboydough44245 жыл бұрын
I am the one behind the 67 mustang it has the trunk and Hood open
@thatboydough44245 жыл бұрын
I was in here
@ninesixx5 жыл бұрын
You're actually a savage if you press read more Now you have great luck forever :) Thumbs up to activate 😊
@ninesixx5 жыл бұрын
You're actually a savage if you press read more Now you have great luck forever :) Thumbs up to activate 😊
@otisanthony28946 жыл бұрын
Are those 9000 or 6000
@ninesixx6 жыл бұрын
otis anthony 6's
@varguezspeedworks24137 жыл бұрын
how would you rate this summit x pipe kit for your specific application? (first gen camaro) was it a pretty straight foward install how much modificatipn was required to install?
@ninesixx7 жыл бұрын
Michael Varguez none were made, just welded to mufflers. I will buy the x pipe kit from now on.
@brieontk7 жыл бұрын
What's size headers ? 1 5/8 or 1 3/4
@ninesixx7 жыл бұрын
Brieon K small 1 5/8 hedmans
@billcharlene14507 жыл бұрын
If I were your neighbor i would say"HEY!! if you dont start that car and rev the piss out of it im callin the cops"
@ninesixx7 жыл бұрын
Miss you Mike r.i.p 5/3/17
@peeweekirkland81777 жыл бұрын
if you don't mind me asking what are the specs on the cam I have a SBC 350 and I'm at a dead still when it comes to a mild cam
@bessiemarie90347 жыл бұрын
what cam specs?
@dejuan717 жыл бұрын
What x pipe did you go with? I know you said summit but what's the part number ?
def deeper in person, rattles for a split second at a certain rpm but sounds way healthier than the super 44 flows
@dejuan717 жыл бұрын
I was just thinking about flowmaster 44s because of the way it sounds with true duals I was disappointed. I'll try an X pipe
@dejuan717 жыл бұрын
Is it deeper in person? I have spins on my car but it's true dual sounds good until I get on it then it pops and cackles like shit. But idk if I want an X or h pipe.
@charlessmiff24997 жыл бұрын
This slap bro! For real.
@syrenbeats43379 жыл бұрын
Thanks ninesixx this was helpful. I want to make beats in Pro Tools, but use the Maschine hardware and sounds. I don't like the maschine software as much and think I could be more productive in Pro Tools. Do you have any other advise or tips for someone like me?
@EckaMusiq10 жыл бұрын
Thank You !
@Stubbla11 жыл бұрын
OMG this is from 2009 i forgot about this track. hope alls good bro. we need to get a new collabo done hit me up
@ninesixx11 жыл бұрын
I just rap for fun, I make my own tracks. My studio fits in a backpack ha! I had a full studio setup at the house but we needed to space so I got rid of most of my equipment but now I got a spot next to the buckhorn than im gonna be runnin. Where can I hear you music?
@BUDDHAZwifeSamantha11 жыл бұрын
Hay whats good this is samantha b. I seen u was producing outa winters. Thts were im at to. Ay who im diggin this track get at maby we can work. Hit my email [email protected]
@ninesixx11 жыл бұрын
@KingstonPrescott your welcome
@KingstonPrescott11 жыл бұрын
Thanks for the vid brother.
@ninesixx11 жыл бұрын
Sorry so late. I didnt get this email until today. Yes you need an audio interface for the maschine, the one on your standard computer is not sufficient enough. I use a pro tools mbox, but you can use any inexpensive one from guitar center or musicians friend. Basically the maschine connects directly to your computer via usb, and the audio interface connects to your computer via usb as well, the computer acts like a hub. Then open maschine, and locate your audio interface and select it. Its easy
@theverbtechnician11 жыл бұрын
my man, can u please be so kind to explain how your connections are? That seems to be the only thing that bothers me..... not sampling itself, but how my connections should be..... if I need an audio interface or not, and if so how they should be connected! Thanks!! preciate it!
@taxsot111 жыл бұрын
Thanks homie you were right on time with clip! Big ups it really helped alot
@ninesixx12 жыл бұрын
no, you can only export out midi data then import it where you need it. sorry for the delay!
@DjHurt7812 жыл бұрын
Can you sample midi data from protools the same way as you sampled audio?
@ninesixx12 жыл бұрын
@ThaRealBummyDavis right on bro. Glad i could help.
@ThaRealBummyDavis12 жыл бұрын
you have no clue how much you just helped me!!! I could NOT understand how the hell to do this. Thanks
@biggstaccs80513 жыл бұрын
the beat is reediculous and i like the uptempo flow.....reserve me TWO copies of the album fam.
@gmotif613 жыл бұрын
great vid. try audacity also
@EROKBEATZ13 жыл бұрын
Bay Luv flavor keep doin your thang homie . and dope setup
@fonduey13 жыл бұрын
ninesixx actually that was very helpful. i want to know all options because that expands my world! Thanks.
@Sytrusze13 жыл бұрын
@ninesixx Okay cool that you are willing to share with others man keep doing your thing!
@ninesixx13 жыл бұрын
@Sytrusze yes you are correct! At this time i just purchased the maschine and didnt know any better and i had just googled everything i could on how to do this and all i found was others asking the same question and no answers. So as soon as i figured out how, i wanted to share it with anyone who wanted to know. I still do it this way, only because converting files to .wav takes a few extra steps for me in pro tools. But good lookin out
@Sytrusze13 жыл бұрын
Why would you do this though? It is MUCH MUCH easier to load up your sample into Maschine directly imho
@giotronic13 жыл бұрын
I am a newbie as well! I have Maschine and Prot tools. I appreciate the tutorials that just deal with PT and Maschine. I wil try this when I get the chance! Mad Props!!!!
@smokey510013 жыл бұрын
Thanks!
@jbmbeatz13 жыл бұрын
Turntables Sampling through P.T. works pretty much the same tway. I ran my tt mixer audio out into the M-Box2 in ports. Inside P.T. tracks wise: I loaded up a Stereo mixer, 1 Stereo audio track, and 1 instrument track for the Maschine. I changed the input on the Instrument track to my stereo channels 1&2. I hit play on the turntable and the Maschine picked up the Audio. Nice Video ninesixx !!Thanks
@ninesixx14 жыл бұрын
@andypimen914 LOL good lookin Family! Hit me up if you have questions with that pro tools.
Пікірлер
Maybe you should have had your wife rev it for you. 🤣🤣
yep...
What rocker arm ratio?
What cam are you running? Sounds great!
It had a comp roller 288hr-10. Now it has a totally different setup built for nitrous
Wat kind of cam
Nice rides
Great coverage of a kool show. Thanks for sharing. Oh by the way I just became your 149th subscriber
Were is nu trend car club
Dope video my hometown Salas always shows up! Thanks for sharing!
I am the one behind the 67 mustang it has the trunk and Hood open
I was in here
You're actually a savage if you press read more Now you have great luck forever :) Thumbs up to activate 😊
You're actually a savage if you press read more Now you have great luck forever :) Thumbs up to activate 😊
Are those 9000 or 6000
otis anthony 6's
how would you rate this summit x pipe kit for your specific application? (first gen camaro) was it a pretty straight foward install how much modificatipn was required to install?
Michael Varguez none were made, just welded to mufflers. I will buy the x pipe kit from now on.
What's size headers ? 1 5/8 or 1 3/4
Brieon K small 1 5/8 hedmans
If I were your neighbor i would say"HEY!! if you dont start that car and rev the piss out of it im callin the cops"
Miss you Mike r.i.p 5/3/17
if you don't mind me asking what are the specs on the cam I have a SBC 350 and I'm at a dead still when it comes to a mild cam
what cam specs?
What x pipe did you go with? I know you said summit but what's the part number ?
dejuan71 Part#: SUM-642125 Item: X-PIPE KIT 2 1/2" Price: $89.97
Thank you.
Hey, sounds awesome, are these 9000s or 6000s??
3400beretta 6000's and they are loud
def deeper in person, rattles for a split second at a certain rpm but sounds way healthier than the super 44 flows
I was just thinking about flowmaster 44s because of the way it sounds with true duals I was disappointed. I'll try an X pipe
Is it deeper in person? I have spins on my car but it's true dual sounds good until I get on it then it pops and cackles like shit. But idk if I want an X or h pipe.
This slap bro! For real.
Thanks ninesixx this was helpful. I want to make beats in Pro Tools, but use the Maschine hardware and sounds. I don't like the maschine software as much and think I could be more productive in Pro Tools. Do you have any other advise or tips for someone like me?
Thank You !
OMG this is from 2009 i forgot about this track. hope alls good bro. we need to get a new collabo done hit me up
I just rap for fun, I make my own tracks. My studio fits in a backpack ha! I had a full studio setup at the house but we needed to space so I got rid of most of my equipment but now I got a spot next to the buckhorn than im gonna be runnin. Where can I hear you music?
Hay whats good this is samantha b. I seen u was producing outa winters. Thts were im at to. Ay who im diggin this track get at maby we can work. Hit my email [email protected]
@KingstonPrescott your welcome
Thanks for the vid brother.
Sorry so late. I didnt get this email until today. Yes you need an audio interface for the maschine, the one on your standard computer is not sufficient enough. I use a pro tools mbox, but you can use any inexpensive one from guitar center or musicians friend. Basically the maschine connects directly to your computer via usb, and the audio interface connects to your computer via usb as well, the computer acts like a hub. Then open maschine, and locate your audio interface and select it. Its easy
my man, can u please be so kind to explain how your connections are? That seems to be the only thing that bothers me..... not sampling itself, but how my connections should be..... if I need an audio interface or not, and if so how they should be connected! Thanks!! preciate it!
Thanks homie you were right on time with clip! Big ups it really helped alot
no, you can only export out midi data then import it where you need it. sorry for the delay!
Can you sample midi data from protools the same way as you sampled audio?
@ThaRealBummyDavis right on bro. Glad i could help.
you have no clue how much you just helped me!!! I could NOT understand how the hell to do this. Thanks
the beat is reediculous and i like the uptempo flow.....reserve me TWO copies of the album fam.
great vid. try audacity also
Bay Luv flavor keep doin your thang homie . and dope setup
ninesixx actually that was very helpful. i want to know all options because that expands my world! Thanks.
@ninesixx Okay cool that you are willing to share with others man keep doing your thing!
@Sytrusze yes you are correct! At this time i just purchased the maschine and didnt know any better and i had just googled everything i could on how to do this and all i found was others asking the same question and no answers. So as soon as i figured out how, i wanted to share it with anyone who wanted to know. I still do it this way, only because converting files to .wav takes a few extra steps for me in pro tools. But good lookin out
Why would you do this though? It is MUCH MUCH easier to load up your sample into Maschine directly imho
I am a newbie as well! I have Maschine and Prot tools. I appreciate the tutorials that just deal with PT and Maschine. I wil try this when I get the chance! Mad Props!!!!
Thanks!
Turntables Sampling through P.T. works pretty much the same tway. I ran my tt mixer audio out into the M-Box2 in ports. Inside P.T. tracks wise: I loaded up a Stereo mixer, 1 Stereo audio track, and 1 instrument track for the Maschine. I changed the input on the Instrument track to my stereo channels 1&2. I hit play on the turntable and the Maschine picked up the Audio. Nice Video ninesixx !!Thanks
@andypimen914 LOL good lookin Family! Hit me up if you have questions with that pro tools.