I'm gonna try to make a video on this sometime in the future. It's been sitting in our shed for quite some time now and will need to be gone through. I'd like to get it running here soon and hopefully answer some of the questions you guys have been asking!
@dannyanderson33593 ай бұрын
I started watching your video with interest . But quickly cut it off because of your language
@TractorPrepper12 күн бұрын
Thanks for the comment, sorry if I offended. I'll do my best in the future.
@frankiemarchese29787 ай бұрын
Valves or cam chain sound a bit noisy. Nice quad i have the same one
@saladfox8 ай бұрын
Saw your comment on the video. Glad to see your Fiero is coming along well too!
@knoslo2058 Жыл бұрын
Will you be at the 40th ? Car looks and sounds great !
@TractorPrepper Жыл бұрын
I had planned on it, but I couldn't get the time off to go. But I'd really like to at least swing by for a day or so and see everyone else's cars.
@Evening1202 жыл бұрын
I'm buying the exact same sled tomorrow any tips ?
@walkingdub Жыл бұрын
it’s fast as shit is the only tip i have to offer
@nathanbishop19992 жыл бұрын
I’m a little late but love the video! I just got done with one waverunner and as soon as I sold it I found 2 more. I’m learning these things inside and out
@chuckfowler47543 жыл бұрын
What driveshaft/adapters did you need to do this?
@johnchadwicktilton3 жыл бұрын
I am curios to know where the fuel tank is .
@TractorPrepper3 жыл бұрын
Fuel tank is in the back under the seat where the battery usually is. It was relocated the under the hood where they were on older cubs
@marcol78473 жыл бұрын
What is a 454 for factory? Is there any way I can get a picture of the factory emission sticker if it’s a 454? I really need it to follow the diagram to restore it back to factory . Thank you
@TractorPrepper3 жыл бұрын
No, it was a 350 and the sticker was pretty much faded completely away. Sorry I couldn't help ya man.
@mmoplayerful14 жыл бұрын
To bad you put awful music... would of loved to hear audio
@TractorPrepper4 жыл бұрын
Well my POS camera doesnt pick up sound that well so that's why I put "awful" music over it. But thank you for the comment.
@mmoplayerful14 жыл бұрын
MinnesotaCadet your good man. Just bought one like it!. Was worried they are very powerful. What’s your experience with em?
@TractorPrepper4 жыл бұрын
@@mmoplayerful1They're pretty powerful. But the bottoms are pretty flat and they dont cut through waves as well as modern ones. But you can do spinsouts and whatnot that you cant do on newer ones. They're pretty fun.
@jonahthomas10714 жыл бұрын
I miss the sound of that we had one 1995 Polaris magnum 425 and we moved so it’s my grandparents now
@shawnmontalvo1814 жыл бұрын
Was the motor a direct fit? I don’t see any mods to the side of the frame.
@TractorPrepper3 жыл бұрын
A bit of the frame had to be grinded away. But otherwise no major changes.
@calebproductions59704 жыл бұрын
That's a 1979
@TractorPrepper4 жыл бұрын
It's an 80. I put 79 decals on it. I clarified that in the description.
@calebproductions59704 жыл бұрын
Didn't read it, cool trike.79 decals look better on it.
@MichaelTJD604 жыл бұрын
Those brass screws for the choke plate are a royal pain. I ended up grinding them off the last time I had to swap out a choke shaft. And the heads strip pretty easily if you're not careful with the screwdriver.
@MichaelTJD604 жыл бұрын
Nice save. That tractor should clean up really well. Driveshaft is junk though...lol
@TractorPrepper4 жыл бұрын
Got plenty parts laying around lol. I'll probably tackle that among other things in the next video.
@danielkroll42405 жыл бұрын
Where did you move the gas tank?
@TractorPrepper4 жыл бұрын
It was moved under the seat.
@stephanfarms93075 жыл бұрын
How much $ lol
@davestone9837 жыл бұрын
I just picked up a 1711 Hydro. Need a seat, front hubcaps, and a grille. Got any extras?
@TractorPrepper7 жыл бұрын
I probably have a seat. it's the only spread frame cub cadet we've owned so far so we don't have many parts for it.
@bernaputa7 жыл бұрын
where do you get the that tank for te 110?
@bernaputa7 жыл бұрын
hey its that the original tank?
@TractorPrepper7 жыл бұрын
It is an aftermarket tank.
@Sleazysleazed8 жыл бұрын
Thats nice just throwing thay out there i basiclly have all the sizes cokection started the day they were made if your an off road person the 350 is a great bike even the 200 not r thats a lil to much tourq haha but 250 is still a great bike as well i might be able to help you find parts if you cant find any now plenty of people down in the desert area
@Sleazysleazed8 жыл бұрын
So is it curently running
@TractorPrepper8 жыл бұрын
Yeah as you can see. I bought a starter reduction gear but it was the wrong size and I cannot find a correct style one that would fit so I'm S.O.L unless I can find one. Until then I'm using the kickstarter I guess.
@Sleazysleazed8 жыл бұрын
Figures yea can be pretty hard to find atc parts because of how old they are im usally finding them on ebay basic items so have you ever considerd selling it despite the push start not working
@TractorPrepper8 жыл бұрын
I've wanted a 250sx for a while and I finally found one. I intend on keeping it a while. I ordered a 6pack holder style grab bar for it and I have a minimate that fits it perfect. Some other misc stuff too. Too much to list.
@Sleazysleazed8 жыл бұрын
Are you willing to sell $$
@TractorPrepper8 жыл бұрын
I already got a lot of it taken apart. New gas tank, starter, headlight switches. and much more.
@BubbaGerald8 жыл бұрын
Any probs with the shifter. Mine has a tendency to stick between 2nd&3rd
@TractorPrepper8 жыл бұрын
+paul tertelis Nope. But I do have that same problem with my 250 big red.
@BubbaGerald8 жыл бұрын
Is there any way to fix it?
@TractorPrepper8 жыл бұрын
+paul tertelis I'm sure there is. There is a way to fix anything on these old machines.
@PetPrepper8 жыл бұрын
You are gonna have fun with THAT!
@stevewinter31888 жыл бұрын
I would like to see and know more on this tractor and how it was repowered
@TractorPrepper8 жыл бұрын
+Steve Winter I didn't repower it myself. An unknown man repowered it many years ago and abandoned the project. He then sold it to a Cub guy that wanted to work on it but never got the chance. He then sold it to me and it got it going and I plan to finish the project. I Can take more up-close pictures and videos if needed.
@MichaelTJD609 жыл бұрын
You should have put the 318 in front since it has another cylinder and more power to cut through the grass the first time around, then use the Cub behind it to finish up.
@TractorPrepper9 жыл бұрын
The 1250 cut better than the 318 anyway. The deck on the 1250 is deep and has more suction while the one on the 318 has a more shallow deck and has less vacuum.
@MichaelTJD609 жыл бұрын
TractorPrepper Ah, good point. The 46" JD deck doesn't have a very good cut to begin with, I have two of them. The 50" deck available for the 318 is a deep deck though and does have a very good cut, as good as the deck on the Cub.
@TractorPrepper9 жыл бұрын
MichaelTJD60 I have since parted out this 1250 since this video. It was far gone and was on its last leg i have since put the engine in a 1450 frame and the transmission in a 1650. I have put the deck from this video on the 1650 and it cuts even better than on the 1250. I would really like to get a john deere. Something like a 140, 318, 317, Something along those lines I don't know much about John Deere GTs. Mostly IH Cubs.
@MichaelTJD609 жыл бұрын
Those old Cubs are good machines. Just like the old Deere's. Can't speak for the new JD's and Cubs though lol. A JD 318 is a great machine, I grew up on one and now I have my own 210. Very reliable machines, they can take a beating and the Kohler and Onan motors have a lot of power with the hydro trans and lift. Some have power steering and there are tons of attachments available.
@TractorPrepper10 жыл бұрын
We've had one. The Cub is adjusted to be faster when I got it.
@PetPrepper10 жыл бұрын
Awesome, so glad you put this video up. Now I wanna see some races! Go CUB!
Пікірлер
I'm gonna try to make a video on this sometime in the future. It's been sitting in our shed for quite some time now and will need to be gone through. I'd like to get it running here soon and hopefully answer some of the questions you guys have been asking!
I started watching your video with interest . But quickly cut it off because of your language
Thanks for the comment, sorry if I offended. I'll do my best in the future.
Valves or cam chain sound a bit noisy. Nice quad i have the same one
Saw your comment on the video. Glad to see your Fiero is coming along well too!
Will you be at the 40th ? Car looks and sounds great !
I had planned on it, but I couldn't get the time off to go. But I'd really like to at least swing by for a day or so and see everyone else's cars.
I'm buying the exact same sled tomorrow any tips ?
it’s fast as shit is the only tip i have to offer
I’m a little late but love the video! I just got done with one waverunner and as soon as I sold it I found 2 more. I’m learning these things inside and out
What driveshaft/adapters did you need to do this?
I am curios to know where the fuel tank is .
Fuel tank is in the back under the seat where the battery usually is. It was relocated the under the hood where they were on older cubs
What is a 454 for factory? Is there any way I can get a picture of the factory emission sticker if it’s a 454? I really need it to follow the diagram to restore it back to factory . Thank you
No, it was a 350 and the sticker was pretty much faded completely away. Sorry I couldn't help ya man.
To bad you put awful music... would of loved to hear audio
Well my POS camera doesnt pick up sound that well so that's why I put "awful" music over it. But thank you for the comment.
MinnesotaCadet your good man. Just bought one like it!. Was worried they are very powerful. What’s your experience with em?
@@mmoplayerful1They're pretty powerful. But the bottoms are pretty flat and they dont cut through waves as well as modern ones. But you can do spinsouts and whatnot that you cant do on newer ones. They're pretty fun.
I miss the sound of that we had one 1995 Polaris magnum 425 and we moved so it’s my grandparents now
Was the motor a direct fit? I don’t see any mods to the side of the frame.
A bit of the frame had to be grinded away. But otherwise no major changes.
That's a 1979
It's an 80. I put 79 decals on it. I clarified that in the description.
Didn't read it, cool trike.79 decals look better on it.
Those brass screws for the choke plate are a royal pain. I ended up grinding them off the last time I had to swap out a choke shaft. And the heads strip pretty easily if you're not careful with the screwdriver.
Nice save. That tractor should clean up really well. Driveshaft is junk though...lol
Got plenty parts laying around lol. I'll probably tackle that among other things in the next video.
Where did you move the gas tank?
It was moved under the seat.
How much $ lol
I just picked up a 1711 Hydro. Need a seat, front hubcaps, and a grille. Got any extras?
I probably have a seat. it's the only spread frame cub cadet we've owned so far so we don't have many parts for it.
where do you get the that tank for te 110?
hey its that the original tank?
It is an aftermarket tank.
Thats nice just throwing thay out there i basiclly have all the sizes cokection started the day they were made if your an off road person the 350 is a great bike even the 200 not r thats a lil to much tourq haha but 250 is still a great bike as well i might be able to help you find parts if you cant find any now plenty of people down in the desert area
So is it curently running
Yeah as you can see. I bought a starter reduction gear but it was the wrong size and I cannot find a correct style one that would fit so I'm S.O.L unless I can find one. Until then I'm using the kickstarter I guess.
Figures yea can be pretty hard to find atc parts because of how old they are im usally finding them on ebay basic items so have you ever considerd selling it despite the push start not working
I've wanted a 250sx for a while and I finally found one. I intend on keeping it a while. I ordered a 6pack holder style grab bar for it and I have a minimate that fits it perfect. Some other misc stuff too. Too much to list.
Are you willing to sell $$
I already got a lot of it taken apart. New gas tank, starter, headlight switches. and much more.
Any probs with the shifter. Mine has a tendency to stick between 2nd&3rd
+paul tertelis Nope. But I do have that same problem with my 250 big red.
Is there any way to fix it?
+paul tertelis I'm sure there is. There is a way to fix anything on these old machines.
You are gonna have fun with THAT!
I would like to see and know more on this tractor and how it was repowered
+Steve Winter I didn't repower it myself. An unknown man repowered it many years ago and abandoned the project. He then sold it to a Cub guy that wanted to work on it but never got the chance. He then sold it to me and it got it going and I plan to finish the project. I Can take more up-close pictures and videos if needed.
You should have put the 318 in front since it has another cylinder and more power to cut through the grass the first time around, then use the Cub behind it to finish up.
The 1250 cut better than the 318 anyway. The deck on the 1250 is deep and has more suction while the one on the 318 has a more shallow deck and has less vacuum.
TractorPrepper Ah, good point. The 46" JD deck doesn't have a very good cut to begin with, I have two of them. The 50" deck available for the 318 is a deep deck though and does have a very good cut, as good as the deck on the Cub.
MichaelTJD60 I have since parted out this 1250 since this video. It was far gone and was on its last leg i have since put the engine in a 1450 frame and the transmission in a 1650. I have put the deck from this video on the 1650 and it cuts even better than on the 1250. I would really like to get a john deere. Something like a 140, 318, 317, Something along those lines I don't know much about John Deere GTs. Mostly IH Cubs.
Those old Cubs are good machines. Just like the old Deere's. Can't speak for the new JD's and Cubs though lol. A JD 318 is a great machine, I grew up on one and now I have my own 210. Very reliable machines, they can take a beating and the Kohler and Onan motors have a lot of power with the hydro trans and lift. Some have power steering and there are tons of attachments available.
We've had one. The Cub is adjusted to be faster when I got it.
Awesome, so glad you put this video up. Now I wanna see some races! Go CUB!