This all AI. Second video has no wheat in the bin.
@timlewis50965 күн бұрын
Well spotted. I thought something was off but couldn't put my finger on it!!! Bloody crap AI
@joeltroyer4 күн бұрын
lol...yeah, my drone batteries probably need to be replaced. It can only fly and record for about 15-20 minutes before the batteries are drained. It certainly takes a bit longer to fill the bin in an average yield. I am sure my dad is trying to figure out who Al is... lol
@chrisburke8485 күн бұрын
Great Tunes!
@rodneycody87466 күн бұрын
Nice
@jhanlarosh662010 күн бұрын
Nice to see that auto steer still works good 👍😀
@joeltroyer4 күн бұрын
lol...always as good as the person holding the wheel.
@wayner80610 күн бұрын
I like music but the sounds of the machine would’ve been better
@danaevans35248 күн бұрын
I agree! Talk about the machine, the wheat crop the experiences with the combine. Strengths and weakness of the machine etc. Just saying!
@joeltroyer4 күн бұрын
I will see what I can do next year. I think I have some other videos from prior years with more sounds of the machine...
@tpa196310 күн бұрын
Hada Gleaner E. Awesome little machine. Loved combining wheat.
@Blazefork10 күн бұрын
Nice
@Blazefork10 күн бұрын
Started out with a Gleaner G, brought back some good memories, less stress and expenses keeping that ol girl in the field that how things are now! I think I spent less the whole time I ran that thing than I do yearly now. They can sure clean that wheat can't they!
@christianhollauer88110 күн бұрын
is the old cleaner still working well?
@joeltroyer4 күн бұрын
Yeah, still doing the job.
@jaybernieschoep349111 күн бұрын
Ac gleaners do a good clean job
@michaelbaker82611 күн бұрын
Very nice video. Thanks for sharing!
@ronzimmerman896811 күн бұрын
Those old Gleaners were good machines. Good clean sample and simple design.
@peterbilt964412 күн бұрын
Back in the early 2000’s I was on the harvest run and we used to cut around Harper and Norwich area…it was like a step back in time in some ways seeing all the older machines and trucks….i really enjoyed that area….great people!! But always muddy lol….it was like the harvest crews are here so let’s just rain 10 inches lol!
@djsbadboyford12 күн бұрын
In case you were wondering who I am- I’m Joyce Mathes son who spent 7 summers back there in the 90’s when I was in high school. My mom went to school with Eddie.
@LukeLong-oi4uc12 күн бұрын
That old gleaner seems to do a good job cleaning . I always wanted a diesel F when I first started out, but in this part of north east Oklahoma there wasn’t any real support as far as parts go. In the 80s they were still commanding a pretty high price. Nice work and video!
@jimbaker713312 күн бұрын
Let's be honest. There wasn't a lot of parts support for Gleaner ever...anywhere
@LukeLong-oi4uc12 күн бұрын
@@jimbaker7133 lol. I didn’t know that. A local farmer here had I think a f2 and a M2 in the eighties but traded them off for a 1660 iH. It was mostly international, Deere and a couple Masseys where I live back then. Most of farmers have since retired , passed or switched to cattle. I myself had an international combines, but I hung up grain farming in 2003 and switched to cattle and hay.
@jimbaker713313 күн бұрын
1970 what?
@joeltroyer12 күн бұрын
1976
@wiltfarms6513 күн бұрын
Good to see the older machines still working as hard and doing a great job as the big shiny ones. Let’s see if those will be running 48 years from now. Your machine will probably cutting around them in the tree belt.
@karljacobson157513 күн бұрын
That’s been shedded it’s whole life I bet! Used to run a c2 back in the day.
@markhenson40203 ай бұрын
I just bought this truck that you used to own
@sarah_farm5 ай бұрын
We congratulate you, you are introducing us to the village and country life in a pure and clear way, with a nice level of sincerity.thank you
@sarah_farm6 ай бұрын
I hope you will continue to show us your traditional cooking. It’s better than watching all those world famous chefs . Also your traditional attire and lifestyle are so wholesome , healthy and peaceful. It’s very soothing watching your videos . And it's an honor to have you visit our channel, we can discuss more about our experiences in harvesting and building farms.
@user-ov4od1xt9p6 ай бұрын
Good job on the video also love the music 👍 but whats the year and model of that gleaner combine 🤔
@donbenson529210 ай бұрын
Great to see these Gleaners still going strong.
@musicajecy96910 ай бұрын
මේ අස්වැන්න මොනාද?
@rodneycody874611 ай бұрын
Nice
@rodneycody874611 ай бұрын
Nice
@eddiebaughman2809 Жыл бұрын
Love those combines. Spent many hours in an F. They could eat the wheat for their day and so easy to work on. Only had to carry 2 bearings for most things .
@Farmtractor Жыл бұрын
NEEDS BATTERIES
@abrahammunoz2717 Жыл бұрын
What was it and what was the fix
@donzender9008 Жыл бұрын
Growing up we had an F and then an M2. Love seeing this old iron in action!
@carlheugel7472 Жыл бұрын
I spen many hours cutting whet in Northern leavenworth county ks in a F Glener combine
@user-sr3uj1wn5s Жыл бұрын
Башмаков Ф.Ф. вово ( путин ) 23 года ЛЯЛЯЛЯяяя ... Российского ВСЕ ... КОНЧАЛлл ... НЕТ - НЕ ХУЙЬЯяяя... НЕ ЧЕГО...
@rugabeast6079 Жыл бұрын
How is your guys yield down there?
@danielhalstead9565 Жыл бұрын
Absolutely just love to see old farm equipment still working
@farmerbill6855 Жыл бұрын
Sweet old Gleaner, looks well taken care of. Paid for herself a few times I'd bet. Looks like nice wheat too, what a great way to spend a day. Best regards from Indiana.
@bartpickens8650 Жыл бұрын
Interesting that A-C was still making the F model in 1976. I thought the advent of the L model had brought an end to the earlier models.
@burtzorn4059 Жыл бұрын
Old fashion farming. Those were the best times in my opinion. Enjoyed your video, thanks.
@RockinHFarmToys Жыл бұрын
Great Video. Grandpa had a 71 GMC and a M2 in the day. I made a 1.64 replica of both machines to keep as a memory.
@garybarrett6581 Жыл бұрын
great video ran gleaner combines for 50 years started with C and ended with an N6!! l will be watchin!!!
@AnglesideFarm2 жыл бұрын
Nice old Gleaner getting it done! Great machine.
@ronzimmerman89682 жыл бұрын
We ran an E3 and a 71 C50. The guy at the elevator said Gleaners always had the cleanest samples.
@jasonberger45612 жыл бұрын
What model gleaner is that
@eddiebaughman28092 жыл бұрын
Great combines. Dad had one. You only had to carry 2 main bearings to repair and easy to work on. Way ahead of everything else. It was also very clean grain without over throwing.
@hybridssuck2 жыл бұрын
Awesome video. Is that an 18’ header? Seems large for an F. Either way, very cool video, always like to see Kansas harvests especially with Gleaners!
@joeltroyer2 жыл бұрын
Yes, it is an 18 foot header.
@Cosm1cCream2 жыл бұрын
Good ol' fashioned American farming at its finest
@AdrianPerez-qj7lc2 жыл бұрын
Is awesome the old combine saludos from mexico
@kevinsasse49712 жыл бұрын
I was 13 when dad got his new Gleaner F. He said it's much easier to run the combine than to unload the truck, I didn't argue with him one bit. Ours didn't have A/C dad put a water cooler on top of the cab. It helped a little. For the folks that might wonder about the machine running while unloading the wheat, you did that so the thrashing cylinder stayed in balance. Sometimes if you stopped those older machines dirt and chaff would fall from the inside of the cylinder and then it would take some time for it to get rebalanced. Just give you a rough ride for a while.
@robwhite32412 жыл бұрын
Good to see that someone knows that. Once we get our old 8820 going we don't shut off the thresher until we absolutely have too.
@charlietanner62112 жыл бұрын
Good to see older machines earning there keep how wide header
@joeltroyer2 жыл бұрын
The header is 18 feet wide. I saw some new 2022 combines listed for about $680k, so I would say this combine is earning its keep and paying dividends.
@charlietanner62112 жыл бұрын
@@joeltroyer not uncommon to have over one mill in one now
Пікірлер
I had a 1981 Glaeaner MH 2 hillside.
This all AI. Second video has no wheat in the bin.
Well spotted. I thought something was off but couldn't put my finger on it!!! Bloody crap AI
lol...yeah, my drone batteries probably need to be replaced. It can only fly and record for about 15-20 minutes before the batteries are drained. It certainly takes a bit longer to fill the bin in an average yield. I am sure my dad is trying to figure out who Al is... lol
Great Tunes!
Nice
Nice to see that auto steer still works good 👍😀
lol...always as good as the person holding the wheel.
I like music but the sounds of the machine would’ve been better
I agree! Talk about the machine, the wheat crop the experiences with the combine. Strengths and weakness of the machine etc. Just saying!
I will see what I can do next year. I think I have some other videos from prior years with more sounds of the machine...
Hada Gleaner E. Awesome little machine. Loved combining wheat.
Nice
Started out with a Gleaner G, brought back some good memories, less stress and expenses keeping that ol girl in the field that how things are now! I think I spent less the whole time I ran that thing than I do yearly now. They can sure clean that wheat can't they!
is the old cleaner still working well?
Yeah, still doing the job.
Ac gleaners do a good clean job
Very nice video. Thanks for sharing!
Those old Gleaners were good machines. Good clean sample and simple design.
Back in the early 2000’s I was on the harvest run and we used to cut around Harper and Norwich area…it was like a step back in time in some ways seeing all the older machines and trucks….i really enjoyed that area….great people!! But always muddy lol….it was like the harvest crews are here so let’s just rain 10 inches lol!
In case you were wondering who I am- I’m Joyce Mathes son who spent 7 summers back there in the 90’s when I was in high school. My mom went to school with Eddie.
That old gleaner seems to do a good job cleaning . I always wanted a diesel F when I first started out, but in this part of north east Oklahoma there wasn’t any real support as far as parts go. In the 80s they were still commanding a pretty high price. Nice work and video!
Let's be honest. There wasn't a lot of parts support for Gleaner ever...anywhere
@@jimbaker7133 lol. I didn’t know that. A local farmer here had I think a f2 and a M2 in the eighties but traded them off for a 1660 iH. It was mostly international, Deere and a couple Masseys where I live back then. Most of farmers have since retired , passed or switched to cattle. I myself had an international combines, but I hung up grain farming in 2003 and switched to cattle and hay.
1970 what?
1976
Good to see the older machines still working as hard and doing a great job as the big shiny ones. Let’s see if those will be running 48 years from now. Your machine will probably cutting around them in the tree belt.
That’s been shedded it’s whole life I bet! Used to run a c2 back in the day.
I just bought this truck that you used to own
We congratulate you, you are introducing us to the village and country life in a pure and clear way, with a nice level of sincerity.thank you
I hope you will continue to show us your traditional cooking. It’s better than watching all those world famous chefs . Also your traditional attire and lifestyle are so wholesome , healthy and peaceful. It’s very soothing watching your videos . And it's an honor to have you visit our channel, we can discuss more about our experiences in harvesting and building farms.
Good job on the video also love the music 👍 but whats the year and model of that gleaner combine 🤔
Great to see these Gleaners still going strong.
මේ අස්වැන්න මොනාද?
Nice
Nice
Love those combines. Spent many hours in an F. They could eat the wheat for their day and so easy to work on. Only had to carry 2 bearings for most things .
NEEDS BATTERIES
What was it and what was the fix
Growing up we had an F and then an M2. Love seeing this old iron in action!
I spen many hours cutting whet in Northern leavenworth county ks in a F Glener combine
Башмаков Ф.Ф. вово ( путин ) 23 года ЛЯЛЯЛЯяяя ... Российского ВСЕ ... КОНЧАЛлл ... НЕТ - НЕ ХУЙЬЯяяя... НЕ ЧЕГО...
How is your guys yield down there?
Absolutely just love to see old farm equipment still working
Sweet old Gleaner, looks well taken care of. Paid for herself a few times I'd bet. Looks like nice wheat too, what a great way to spend a day. Best regards from Indiana.
Interesting that A-C was still making the F model in 1976. I thought the advent of the L model had brought an end to the earlier models.
Old fashion farming. Those were the best times in my opinion. Enjoyed your video, thanks.
Great Video. Grandpa had a 71 GMC and a M2 in the day. I made a 1.64 replica of both machines to keep as a memory.
great video ran gleaner combines for 50 years started with C and ended with an N6!! l will be watchin!!!
Nice old Gleaner getting it done! Great machine.
We ran an E3 and a 71 C50. The guy at the elevator said Gleaners always had the cleanest samples.
What model gleaner is that
Great combines. Dad had one. You only had to carry 2 main bearings to repair and easy to work on. Way ahead of everything else. It was also very clean grain without over throwing.
Awesome video. Is that an 18’ header? Seems large for an F. Either way, very cool video, always like to see Kansas harvests especially with Gleaners!
Yes, it is an 18 foot header.
Good ol' fashioned American farming at its finest
Is awesome the old combine saludos from mexico
I was 13 when dad got his new Gleaner F. He said it's much easier to run the combine than to unload the truck, I didn't argue with him one bit. Ours didn't have A/C dad put a water cooler on top of the cab. It helped a little. For the folks that might wonder about the machine running while unloading the wheat, you did that so the thrashing cylinder stayed in balance. Sometimes if you stopped those older machines dirt and chaff would fall from the inside of the cylinder and then it would take some time for it to get rebalanced. Just give you a rough ride for a while.
Good to see that someone knows that. Once we get our old 8820 going we don't shut off the thresher until we absolutely have too.
Good to see older machines earning there keep how wide header
The header is 18 feet wide. I saw some new 2022 combines listed for about $680k, so I would say this combine is earning its keep and paying dividends.
@@joeltroyer not uncommon to have over one mill in one now
So cool to see someone still running an F series