Im looking at one with 300k miles for $2k is it a good deal?
@Nickjoenap18 сағат бұрын
I’d say that’s fair if it’s in decent shape and doesn’t have major issues
@selvindeleon3186Күн бұрын
Bro, where did you get those red allen screws?
@NickjoenapКүн бұрын
eBay dress up bolts
@furzeesgrade15713 күн бұрын
Should reset nautral after messing with gesrs release red/green clip depends on model put in fourth reclip jib done
@Jean-Seb7486 күн бұрын
Thx!! That's look like crazy the first time we try to replace it 😅 So..i buy the oem bulb -before looking at e-bay/Amazon 😅 204$ca 🤦♂️ Thanks again, it much help !
@Huseyin-wh5hb7 күн бұрын
looking like a s1hit
@user-pc9kk9ip4s7 күн бұрын
I am sure a Lexus runs long, that's not the problem. The problem is the lack of seat comfort, the "4 wd" -sytem eg.
@ILLSMOKQ-xs6qs8 күн бұрын
I have check engine light on for P144C code it says evap or that’s running rich but not sure ? If this is the issue
@stevenstallon45559 күн бұрын
Don't ever buy it I bought it for my 2002 vw Jetta and it made it worse and it was terrible to put it I took me 2 days just to get it to work
@LAS_A810 күн бұрын
You gotta upgrade everything that connects to the coilovers also for better results, bushings too , it worked well For me no complaints
@artcruz615412 күн бұрын
How did you get the hillstart to work again
@ILLSMOKQ-xs6qs12 күн бұрын
I got the mishimoto intercooler 👍🏻 great vid man
@CarsandTh1ngs12 күн бұрын
I just wanna know how you got a screwdriver on the clamp to take the intake manifold off ma brother 🤣
@stager7012 күн бұрын
For yourself like beginer its very good 👍🏽 For customers its terrible, too bad quality, too many mistakes 😖
@d1specdrifter13 күн бұрын
😮stop using cheap dixie cups to mix in. Invest in legit cups for resin mixing.
@c2petionКүн бұрын
If it works.. why change?
@abelanc109013 күн бұрын
A little detailing and carpet cleaner you be good. I got a very clean 99 with 150k miles. Always fight with selling it. Dont think I will though. So smooth still and comfortable. Good luck.
@jonokiller13 күн бұрын
nice! Doing my first autocross next week
@big948814 күн бұрын
He is lying
@escobih2315 күн бұрын
hey brother do you know what the part number is for that part? can’t redo the upholstery cus like the frame or whatever is like broken… i think someone applied a lot of pressure to it and broke it
@joanda350516 күн бұрын
Donde compraste el alerón?
@tunechif150816 күн бұрын
Finally someone smart enough to let there shit warm up before reving it nice car btw it sounds good
@rpm17217 күн бұрын
You made very clear instructions and excellent pauses to show the things you were pointing out. That makes a huge difference for those unfamiliar with all the terms.
@dkrawk830917 күн бұрын
Did I see this correctly? You just put carbon cloth over the original parts and put the parts back in?????????
@sjordan87720 күн бұрын
my focus st3 is 2016 and it has sync 2
@DecenzoBroJorjor21 күн бұрын
I’ve been shopping around for a focus st. Do you have any recommendations as to what I should look out for? Or what years to avoid?
@nicksabs50823 күн бұрын
Is 4500 good for a 1998 with 163,000 miles nd black interior, its been sitting for a few years and its semi gutted right now i have to put the interior back in (carpet, door cards, headline ) and it comes with a wide body kit
@Nickjoenap23 күн бұрын
Not a terrible price, could maybe use interior being out to talk it down a little bit
@itsmarlo217023 күн бұрын
Does the car have any lights on the dash?
@Nickjoenap23 күн бұрын
Nope
@TheRealPervySage25 күн бұрын
Where did you get that silicone intake coupler?
@goofyman670825 күн бұрын
How long it took you to get it shipped? I just ordered mine but haven’t even received a order yet
@iirohity26 күн бұрын
Nice .
@boner600328 күн бұрын
I own a c5 bro wasn’t even matted once 😂
@HeadsUP25328 күн бұрын
great job man! nice way to kill some free time and make some changes of the engine bay and interior
@dariohdz5104Ай бұрын
Nice video, help me to a cuestión, Can i install an intercooler without tune?
@sarlixx516butler4Ай бұрын
if you turn the diverter valve more, will it create more flutter ? :D Finally found this, can't believe I have lol.
@mircos0ftword315Ай бұрын
you could plastic weld it to hold together better.
@Voke_RobloxАй бұрын
i think this is better since it has a carbon fiber texture
@mark120371Ай бұрын
Any update on the ride quality of the T6 really be considering this for my 1993 LS400. But thinking of having them install a 12kg spring on the front and leave the 10kg in the back. Should allow for a softer setting in the dampening and while retaining very good ride quality.
@graham9316Ай бұрын
"Promosm"
@billycloudy9078Ай бұрын
Good vid I like to information. I just bought one 2014 with 58k. Honestly honestly, I don’t really know much about them but the second owner works at Ford dealership where I bought it from and so if I have any questions about if you ever change the spark plugs out, I can ask him! And I need to ask him if he tuned it he’s got the borla exhaust on it blow off valve, but I’m not exactly sure what else he did to it!
@Destructive-fm9crАй бұрын
This car is amazingly awsome i have a 2015 focus hatch and I have it all black
@tipsguides1451Ай бұрын
I don’t have the install tool🤌
@Dankboi420Ай бұрын
an official 9th owner moment
@colevalle6437Ай бұрын
Hey man wondering if there’s anyway I could get in touch with you I have some questions about my car I’m having some really weird problems that nobody can see to figure out.
@NickjoenapАй бұрын
Yeah message me on Instagram or email me it’s in the description of my channel for contact
@6spddanАй бұрын
Focus ST update?
@NickjoenapАй бұрын
Motor blew, video on that soon
@aksellgallardo3604Ай бұрын
Where did you get the shifter boot and the carbon fiber trim around the shifter
@claytonjames7457Ай бұрын
Where did you find that hose you ran to the intake?
@richyvillarruel6059Ай бұрын
What sand paper did you use grit wise ?
@arkantozz1058Ай бұрын
Thanks buddy, this tutorial works for the Facelift Mk3 too. Same System. I used the OSRAM D3S for around ~50€. half an hour of work. greetings from Germany.
@justinmissesgrandmaАй бұрын
is this lake hefner?
@MariaLincolnАй бұрын
Would they hold going through car wash
@polyfuzegraphicsАй бұрын
Too bad vehicles aren't using our Polymer Fusion labels, or else this would be impossible and companies would never be liable for what is on the label! Great video showing the real weakness of traditional adhesive labeling!
Пікірлер
Im looking at one with 300k miles for $2k is it a good deal?
I’d say that’s fair if it’s in decent shape and doesn’t have major issues
Bro, where did you get those red allen screws?
eBay dress up bolts
Should reset nautral after messing with gesrs release red/green clip depends on model put in fourth reclip jib done
Thx!! That's look like crazy the first time we try to replace it 😅 So..i buy the oem bulb -before looking at e-bay/Amazon 😅 204$ca 🤦♂️ Thanks again, it much help !
looking like a s1hit
I am sure a Lexus runs long, that's not the problem. The problem is the lack of seat comfort, the "4 wd" -sytem eg.
I have check engine light on for P144C code it says evap or that’s running rich but not sure ? If this is the issue
Don't ever buy it I bought it for my 2002 vw Jetta and it made it worse and it was terrible to put it I took me 2 days just to get it to work
You gotta upgrade everything that connects to the coilovers also for better results, bushings too , it worked well For me no complaints
How did you get the hillstart to work again
I got the mishimoto intercooler 👍🏻 great vid man
I just wanna know how you got a screwdriver on the clamp to take the intake manifold off ma brother 🤣
For yourself like beginer its very good 👍🏽 For customers its terrible, too bad quality, too many mistakes 😖
😮stop using cheap dixie cups to mix in. Invest in legit cups for resin mixing.
If it works.. why change?
A little detailing and carpet cleaner you be good. I got a very clean 99 with 150k miles. Always fight with selling it. Dont think I will though. So smooth still and comfortable. Good luck.
nice! Doing my first autocross next week
He is lying
hey brother do you know what the part number is for that part? can’t redo the upholstery cus like the frame or whatever is like broken… i think someone applied a lot of pressure to it and broke it
Donde compraste el alerón?
Finally someone smart enough to let there shit warm up before reving it nice car btw it sounds good
You made very clear instructions and excellent pauses to show the things you were pointing out. That makes a huge difference for those unfamiliar with all the terms.
Did I see this correctly? You just put carbon cloth over the original parts and put the parts back in?????????
my focus st3 is 2016 and it has sync 2
I’ve been shopping around for a focus st. Do you have any recommendations as to what I should look out for? Or what years to avoid?
Is 4500 good for a 1998 with 163,000 miles nd black interior, its been sitting for a few years and its semi gutted right now i have to put the interior back in (carpet, door cards, headline ) and it comes with a wide body kit
Not a terrible price, could maybe use interior being out to talk it down a little bit
Does the car have any lights on the dash?
Nope
Where did you get that silicone intake coupler?
How long it took you to get it shipped? I just ordered mine but haven’t even received a order yet
Nice .
I own a c5 bro wasn’t even matted once 😂
great job man! nice way to kill some free time and make some changes of the engine bay and interior
Nice video, help me to a cuestión, Can i install an intercooler without tune?
if you turn the diverter valve more, will it create more flutter ? :D Finally found this, can't believe I have lol.
you could plastic weld it to hold together better.
i think this is better since it has a carbon fiber texture
Any update on the ride quality of the T6 really be considering this for my 1993 LS400. But thinking of having them install a 12kg spring on the front and leave the 10kg in the back. Should allow for a softer setting in the dampening and while retaining very good ride quality.
"Promosm"
Good vid I like to information. I just bought one 2014 with 58k. Honestly honestly, I don’t really know much about them but the second owner works at Ford dealership where I bought it from and so if I have any questions about if you ever change the spark plugs out, I can ask him! And I need to ask him if he tuned it he’s got the borla exhaust on it blow off valve, but I’m not exactly sure what else he did to it!
This car is amazingly awsome i have a 2015 focus hatch and I have it all black
I don’t have the install tool🤌
an official 9th owner moment
Hey man wondering if there’s anyway I could get in touch with you I have some questions about my car I’m having some really weird problems that nobody can see to figure out.
Yeah message me on Instagram or email me it’s in the description of my channel for contact
Focus ST update?
Motor blew, video on that soon
Where did you get the shifter boot and the carbon fiber trim around the shifter
Where did you find that hose you ran to the intake?
What sand paper did you use grit wise ?
Thanks buddy, this tutorial works for the Facelift Mk3 too. Same System. I used the OSRAM D3S for around ~50€. half an hour of work. greetings from Germany.
is this lake hefner?
Would they hold going through car wash
Too bad vehicles aren't using our Polymer Fusion labels, or else this would be impossible and companies would never be liable for what is on the label! Great video showing the real weakness of traditional adhesive labeling!