Пікірлер

• 
  @goldenrustorbust6 сағат бұрын

  Dude awesome car lol where are you located and how much 😂

• 
  @joelyons3713Күн бұрын

  First time seeing this car, what an awesome build. I had an ‘89.

• 
  @podunkpennsylvania292Күн бұрын

  Vista Cruiser LOL

• 
  @GiitzerlandКүн бұрын

  That is honestly the most redneck car I've ever seen. I live in Florida, so that says a LOT! :D

• 
  @GiitzerlandКүн бұрын

  You really didn't need to list the problems, they're kind of obvious ^^

• 
  @johncamara16502 күн бұрын

  You can NOT sell something that pretty.

• 
  @Beandiptheredneck3 күн бұрын

  Dude this is pretty much the explanation of my 94 bronco 😂 things a complete pile of 💩. But i considered selling it last year, posted it on marketplace, and as soon as I got a message I took it down. Just can't part with it.

• 
  @DeadshotConnor3 күн бұрын

  Hello Brian this is Andrew’s kid we’re at RoucheWorld right now having fun, and glad your doing well on here, and have a great time

• 
  @johnnymack84423 күн бұрын

  I loved watching you build this car.

• 
  @PostalRedneck3 күн бұрын

  I go back and watch them videos every now and then. I enjoyed this build very much and it turned out so nice.

• 
  @dssb351123 күн бұрын

  RIP

• 
  @PostalRedneck3 күн бұрын

  Not gone yet depending on what Tyler does with it. Only time will tell.

• 
  @NickMango4 күн бұрын

  7” of lift 😂😂

• 
  @NickMango4 күн бұрын

  Not having a gas gauge AND having a leak above half tank is a terrible combination.

• 
  @NickMango4 күн бұрын

  Can’t wait for the video! Great job on this. Bet you had a lot of fun. I need a winter beater.

• 
  @PostalRedneck3 күн бұрын

  I only wanted to go 4-5 but I let my buddies talk me into 7. Im kinda glad they did as it looked good that high.

• 
  @PostalRedneck3 күн бұрын

  I dont drive much so not being able to fill the gas tank all the way didn't bother me too much. The gas leak just started last winter as well as the brake lines leaking. I replaced all the brake lines and drove it another year and after sitting down and asking myself if it was worth fixing up I think with how much was wrong with it added up too way too much time and effort for a car that was only suppose to last 2-3 years.

• 
  @stefthepef4 күн бұрын

  Aw, man. I love this thing! Long live the Ninety-Eight Regency Brougham!

• 
  @PostalRedneck3 күн бұрын

  This thing got love everywhere it went. I will for surely miss it.

• 
  @matthewlinenfelser3804 күн бұрын

  On to other projects!

• 
  @PostalRedneck3 күн бұрын

  Yeah this one needed too much work for how many other projects I have laying around.

• 
  @robertsmith9874 күн бұрын

  how the heck did u drive around with it that loud for 4 years??????????

• 
  @PostalRedneck3 күн бұрын

  Its not as bad in person but yeah still loud. Should have done an exhaust on it years ago but never did.

• 
  @RandomDude9894 күн бұрын

  Always loved this car.

• 
  @PostalRedneck3 күн бұрын

  Its one of my favorite looking builds Ive done.

• 
  @bruceyyyyy4 күн бұрын

  So you not gonna make tip of the mitt then?

• 
  @PostalRedneck3 күн бұрын

  Yup. Ill be in my 05 Denali that I just bought.

• 
  @umpty7 күн бұрын

  Is it worth upgrading the rear brakes?

• 
  @PostalRedneck7 күн бұрын

  I would have to go aftermarket as there are no factory options that are bigger than the one already on the SUV GMT800's. The GMT800 Trucks however only have a single piston rear caliper if I ever wanted to down grade though haha.

• 
  @NickMango8 күн бұрын

  Change your Amazon link. Out of stock. Great video 👍

• 
  @PostalRedneck7 күн бұрын

  Thanks for the heads up ill update my amazon lick. Thanks for the comment!

• 
  @NickMango8 күн бұрын

  I got to turn on notifications. I missed your last 2 videos. Great stuff man.

• 
  @PostalRedneck7 күн бұрын

  I will say I just got done putting GMT900 brakes on my Denali and I can lock up the front tires quite easy now so its a very quick and easy upgrade. Thanks for taking the time to comment and glad you are enjoying my content.

• 
  @Richard-hg2ro12 күн бұрын

  Same gig 2016 silverottteno. Thanks for the video

• 
  @PostalRedneck7 күн бұрын

  Great even the next gens have the same issue.

• 
  @RyjahMoto15 күн бұрын

  Ima green neck lol

• 
  @PostalRedneck15 күн бұрын

  @@RyjahMoto what's a green neck?

• 
  @RyjahMoto14 күн бұрын

  @@PostalRedneck idk just made it up maybe someone who loves green lol green money green trees lol everything green lol

• 
  @rosaliom625 күн бұрын

  What’s the name and size of the screw for the roof center console? Mine don’t have one and is just hanging.

• 
  @PostalRedneck21 күн бұрын

  Not sure its just a Philips head screw. I would just try to install a few different sizes you have laying around the house. Shoot even a dry wall screw might work.

• 
  @johncane412726 күн бұрын

  awesome video

• 
  @PostalRedneck21 күн бұрын

  Glad you enjoyed it

• 
  @360offroad26 күн бұрын

  I got video of this tahoe last weekend too

• 
  @PostalRedneck21 күн бұрын

  Just watched the video. Im shocked at how stable the footage is. Thanks for letting me know and hope you had a good time out in the dunes as well.

• 
  @mrazt3ca128 күн бұрын

  The bigger console came factory in my 99 2door Tahoe.

• 
  @PostalRedneck21 күн бұрын

  I have a 97 4 door tahoe and I had to install the larger one in that as well years ago.

• 
  @liluncje28 күн бұрын

  I'm trying to do this in reverse sort of. Lol. I have an 04 Burb i took my center console out not realizing that i need that for my radio to work. Ugh. I installed a jumper seat because I like how open it is without the console. Guess i gotta out it back in though hahaha. Looks like bose out everything in the console... Amp, sub, etc....

• 
  @PostalRedneck21 күн бұрын

  You could try to hide the amp and everything under the jumper seat possibly.

• 
  @liluncje21 күн бұрын

  @@PostalRedneck I got everything working by switching a plug under the dash really easy . Definitely may try to hide the amo and speaker somewhere it sounds like ass now though lol

• 
  @BabyJesus000Ай бұрын

  Do either of your trucks have the Bose system in it?

• 
  @PostalRedneck21 күн бұрын

  I dont recall unfortunately. Whys that?

• 
  @WopadasАй бұрын

  Got one of those planet audio subs in my yukon, it's still alive and well after 5 years.

• 
  @PostalRedneck21 күн бұрын

  I must be on 3 years now with both and they are still kicken as well.

• 
  @sharonvrla64Ай бұрын

  Great instructional! Took me twenty minutes in my Tahoe. Probably the original ones from 2000. Thanks for the bag tip---soooo many pine needles fell out. I have air flow again! Thanks

• 
  @PostalRedneck21 күн бұрын

  Once I found out that my Tahoe had them I replaced them. Im sure mine were original as well and it blows air so much better after I replaced them. Glad you got yours replaced.

• 
  @carryingfire286Ай бұрын

  9:08 classic stuff right there. exactly what would happen to me lmao.

• 
  @PostalRedneck21 күн бұрын

  I guess I should have tested it before I installed it. Still like the looks of it either way but dang how unfortunate.

• 
  @greg7886Ай бұрын

  When you crank the TB adjustment (or swap the keys) to achieve more ride height, you will always have to add positive camber on the shorter upper A-arm to compensate. The harsher ride has less to do with the movement of the hub angles as it does the simple fact that you're increasing the TB tension at ride height. It's basically just like adding stiffer (or taller) springs.

• 
  @PostalRedneckАй бұрын

  Yes when cranking your ride height up you will find that the tire tips in at the top and you will have to adjust for that by getting a proper alignment done afterwords. However adjusting the ride height using the torsion bar adjustment bolt or swapping out the keys does not change the stiffness of the torsion bar.

• 
  @greg7886Ай бұрын

  @@PostalRedneck Hmm. So when you begin to twist a torsion bar the resistance to the torque is the same in the beginning as it is at max torque just before it snaps? Does not sound right but I'm no engineer.

• 
  @PostalRedneckАй бұрын

  @@greg7886 you don't need to be an engineer to understand simple angles. If I clock the torsion key 1° the lower control arm clocks 1°. There is no extra load but the vehicle Rises due to the angle of the control arm. I don't know where you are getting this extra resistance from.

• 
  @greg7886Ай бұрын

  @@PostalRedneck yeh I was thinking of the resistance as your raise the truck but that may be wrong. Maybe there is some small increase because of the steeper angle of the lower a-arm. After thinking about it as you put it, your point makes sense to me. Given the same weight I guess it would not start to resist/tension-up until you reach the end of travel. I did it to my truck .... was able to find some new shocks designed for up to 1.5" lift. Did not have it long after that but I can't say I noticed any hasher ride.

• 
  @OKTULSA918Ай бұрын

  It is 2024, June 18 and this video is exactly what i needed to see!!! You are more than my hero brother!! THANK YOU!!

• 
  @PostalRedneckАй бұрын

  Nice to hear there are still some of these cars out there. Im sadly getting ready to sell both my blue and yellow 1986 Olds 98 after 5 years of owning them.

• 
  @ghosthouseproductions818Ай бұрын

  Does anybody know how to reset the oil light I just changed the oil sensor and the light is now on it was not on before on my 1989 Oldsmobile 98 ? The sensor was bad no oil light I changed it now the light is on do I need to reset since I put the new oil sensor

• 
  @PostalRedneckАй бұрын

  Im guessing you have a bad new sensor as there is no reset. This is just a open or closed circuit switch.

• 
  @ghosthouseproductions818Ай бұрын

  @@PostalRedneck thanks am a do that thanks for your time

• 
  @ghosthouseproductions81827 күн бұрын

  Update you were right bad sensor no more oil light. 50 dollar oil pressure sensor 💩 10 dollar oil sensor did the job 😁

• 
  @bruceyyyyyАй бұрын

  Hello redneck. I've got a Z71 Suburban I'm scrapping the whole front end in favor of the Dana 44 swap. Anything worth keeping? I'm working on cleaning up my new service truck too. It's a 3500 07 Classic Sierra. Has an 11.5" rear end. I thought it looked bigger than a standard 14 bolt.

• 
  @PostalRedneckАй бұрын

  If your doing a SAS then I dont think there is much of anything worth keeping other than the gear box. You will have to send some pictures of the build. I want to do a SAS on my Escalade build some time in the future. The 11.5 is a full float. That is a big axle.

• 
  @lancelamphere7899Ай бұрын

  Your very knowledgeable on the GMT 800

• 
  @PostalRedneckАй бұрын

  That I am.

• 
  @angelc7984Ай бұрын

  You didn’t mention Yukon.

• 
  @PostalRedneckАй бұрын

  You didn't mention Yukon XL, Yukon Denali, Escalade, Escalade ESV, Escalade Platinum or Z71.

• 
  @dssb35112Ай бұрын

  holy shit! 2 videos within a week?!

• 
  @PostalRedneckАй бұрын

  Dont get use to it

• 
  @davetrask2276Ай бұрын

  Need more lift!!!!

• 
  @PostalRedneckАй бұрын

  Always

• 
  @dssb35112Ай бұрын

  Will this work for a 2014 ford escape?

• 
  @PostalRedneckАй бұрын

  If you have a welder and a whole lot of time it will.

• 
  @dssb35112Ай бұрын

  @@PostalRedneck thanks for the advice!

• 
  @Pitman556Ай бұрын

  I winder if this will fit a 99-02 single cab

• 
  @PostalRedneckАй бұрын

  Form what I have researched the single cab is the only one without the cutouts for it unfortunately.

• 
  @klumsytoneАй бұрын

  Let’s go!

• 
  @PostalRedneckАй бұрын

  Yeah buddy

• 
  @wodbonАй бұрын

  Amazing work, will this do for a 2002 Tahoe z71?

• 
  @PostalRedneckАй бұрын

  It sure will. Any 1/2 ton gmt800 from 2000-2006.

• 
  @nashwoods2385Ай бұрын

  That’s a pretty good deal

• 
  @PostalRedneckАй бұрын

  As long as it holds up even if it don't last long it's not a bad deal.

• 
  @davetrask2276Ай бұрын

  He's back!!!

• 
  @PostalRedneckАй бұрын

  Thanks Dave!

• 
  @davetrask2276Ай бұрын

  @@PostalRedneck gambler 500 video???

• 
  @PostalRedneckАй бұрын

  Didnt go. I only do the Tip of the mitt. I did hear the Detroit Gambler 500 was alot better this year then years prior.

• 
  @UnknownMe321Ай бұрын

  Thankfully mine has that already I’m just wondering how I can take advantage to 3D print or search for any ideas

• 
  @PostalRedneckАй бұрын

  Yeah Im sure there are some things you can put up there. I have see a few people with the DIC or switches where the heater controls go.

• 
  @AmilcarSomarribaАй бұрын

  👍👍👍

• 
  @PostalRedneckАй бұрын

  I take it my video help you :)

• 
  @ls1_dreamzАй бұрын

  Great video! I'm looking to do swap the 263XHD to the floor shift NP261. Do you think if you just used a factory 261 harness you could've done with the extra switch you installed?

• 
  @PostalRedneckАй бұрын

  No sure. Never did look into why I couldnt get the 4 low to work out right and for just being an off road toy im happy with it the way it is.

• 
  @gerardjones7881Ай бұрын

  double the price today $213.

• 
  @PostalRedneckАй бұрын

  Dang thats wild how much the price went up on this thing. Guess I was lucky to get it when it first came out for $100.

• 
  @omarHernandez-us4fhАй бұрын

  Are the bearings the same for both sides?

• 
  @mvp.carnageАй бұрын

  me rn

• 
  @PostalRedneckАй бұрын

  Yeah I have done so many torsion bars at this point I just plan on it being a struggle.