Пікірлер

• 
  @jasonpond7866Күн бұрын

  Awesome. Thanks for that.

• 
  @davidglenn62466 күн бұрын

  Dumb ass the video is about changing the ball joints yet you don’t show how you did the hardest part

• 
  @weirdcommenter495610 күн бұрын

  not the check engine light driving me crazy

• 
  @RyanRandall-oo8cm15 күн бұрын

  Man u took way to much stuff off😂😂,take tire off nut off upper,pop it loose,pull it foward,take nut off lower and it all moves together, use a jack and then change both ball joints and back together,30 minutes each side and done

• 
  @user-sb1rp4tr3l27 күн бұрын

  Fuck these dumbass tiktok Ads worthless ass bitches

• 
  @ErikaHarkey-xb1yi3 ай бұрын

  AWESOME!!!! I watched your video, did what you said (2005 GMC 2500) AND IT WORKED. Thanks a million! :)

• 
  @hannahtedeschi6733 ай бұрын

  Thank you!!! What the heck, this helped us so much! Quick and easy fix 👏🏻👏🏻👏🏻

• 
  @larryharless78043 ай бұрын

  Thanks Buddy. A great video.

• 
  @mohsinnasir74534 ай бұрын

  Hey, so I picked up a basically Brand new 2016 Yamaha stryker and I love it. I'm upgrading the stock exhaust with a Vanes and Hines Twin Slash Starraged Exhaust. I was wondering if I need a tune or something after installing the exhaust and if I do, what do I need. I need this done asap, because there's a big ride happening in my city and I need to be there with my bike, I'm their main photographer. I'm in canada BC by the way. Thanks.

• 
  @scottlarsen18554 ай бұрын

  Awesome thanks for posting that. It was driving me crazy.

• 
  @kenny60554 ай бұрын

  All the Debbie Downers? Get a life, probably competitors bashing you. Thanks for the vid

• 
  @prenticewhite71986 ай бұрын

  What size is the dip well on the back of the battery 😮please help

• 
  @markamcampbell57956 ай бұрын

  do you have to reprogram anything after changing the battery?

• 
  @blankerism41896 ай бұрын

  samething almost happened to me regarding the pulley. Autozone and Oreilly wanted to give me the 3.5in (90mm) but factory spec was the 4 inch (102mm). I asked for the 4inch pulley but they either had to special order or claimed they didn't have it. Also the pulleys they had were flat across where the washer and bolt are suppose to attached which would of been impossible to reuse the OEM bolt and washer. The OEM has a... indentation in the pulley design as you can see in this video at the center where the washer and bolt go. Basically for my 2003 4.7L Tundra i had to go with a Gates because of all those factors of the pulley size and the center indentation of the pulley itself so you can use the factory Bolt and Washer. I spent around $43 on Amazon one day shipping.

• 
  @stevesuttle58787 ай бұрын

  Thank you!!

• 
  @nheald97777 ай бұрын

  It would have been nice to have seen the wear in the old joints. Great Video

• 
  @caciocavalloster7 ай бұрын

  Would have been better to actually see you switch the mirror and for the install. Thanks anyway

• 
  @xavita54558 ай бұрын

  Thanks

• 
  @PeelerOutdoors8 ай бұрын

  Good god, thank you for the simple fix. It liked to have drove me nuts.😂

• 
  @GRADGRAD-jq9nk9 ай бұрын

  Someone has got to try the high volume grenades or even the mini grenades on a Stryker.

• 
  @MrGANSR9 ай бұрын

  is there a fuse in the engine box to replace a fuse?

• 
  @Dechieftian9 ай бұрын

  Great tutorial - thanks for posting. I should have looked it over before I started. I would have seen how easy it is to slide - push the plastic cover on the electronic plate. I used a flat head to open the tabs - it worked but could have damaged the tabs as they are not designed to be spread open. Just a slide - push did the trick. Much appreciated .. well done.

• 
  @dan56609 ай бұрын

  THANK YOU for this! I had no Idea how it comes off. What in the world would we do without KZread?

• 
  @eddiebangari5629 ай бұрын

  Just replace the impeller $30 amazon

• 
  @famousyoutuber237510 ай бұрын

  That’s great , I just got a 2010 Ram 6.7 … I’ll have to contact Fort bend Dodge to find out full service records . You’d think the magnet would be on the bottom of gear housing?

• 
  @themechanicattheport778610 ай бұрын

  Thank you big man. So cool to show location.

• 
  @sergiogodoy410410 ай бұрын

  This half ass video cut out all the good parts

• 
  @mikecarpenter323710 ай бұрын

  would have been nice to see how you pressed in upper to see how difficult it is

• 
  @ProudBronySmitty10 ай бұрын

  Thank you so much for posting this video! The battery in my 2012 Equinox died in my driveway, but thanks to your awesome video, it was a easy to disconnect the old one and install the new one. From the tools needed to the steps involved, it's was very reassuring and is greatly appreciated. My Equinox is running like a champ again. Thank you! 👍

• 
  @user-dq1gk2eb3r11 ай бұрын

  А мы в России меняем не целую помпу а ее серцевину ротор...так дешевле😂

• 
  @calebgibson4716 Жыл бұрын

  you skipped the only hard part moron

• 
  @bertpow8980 Жыл бұрын

  How much would a mechanic like you charge for this job?

• 
  @MrPfrh Жыл бұрын

  Don't tell ya how to disable it altogether

• 
  @cristianvazquez6521 Жыл бұрын

  You’re a beast

• 
  @mlpparty5599 Жыл бұрын

  Factory pulley is 102mm. Aftermarket tensioner assembly mounts pulley center offset(closer to The belt) from the original with 90mm pulley. The smaller pulley has less mass and mounting it offset from the original means the outer edge the belt rides on is in the same position as the larger 102mm pulley. Same tension on belt. People saying the smaller pulley gives less tension are correct if you were to mount it on the tensioner arm for the 102mm pulley. They sold you the “3.5 inch” pulley(90mm) because the original tensioner is considered obsolete. Pretty sure aftermarket tensioners come with the 90mm pulley now. You can buy the 102mm pulley. I just got a Gates 102mm from oreilly but I had to specify I had an original tensioner or they would’ve handed me a 90mm pulley.

• 
  @bobt4260 Жыл бұрын

  Thats the way to keep it simple. Great Vid.

• 
  @doctorwizz1 Жыл бұрын

  Half assed instruction video.

• 
  @quiktv1587 Жыл бұрын

  Thank you! Jesus, I’m sitting here in my new to me gmc Sierra working on the instrument cluster of course, and this chime is burning my drums every time I turn the key

• 
  @ew-d605 Жыл бұрын

  Thank you so much!!!!

• 
  @dpp186 Жыл бұрын

  Awesome information

• 
  @MrBunch21 Жыл бұрын

  So is it just the impeller that jams?

• 
  @brandontrailor5014 Жыл бұрын

  Thank you! Imstructions that came with my controller and harness simply said the connector was "under the dash". You led me right to the connector.

• 
  @ralphdaugh5257 Жыл бұрын

  What is the axle nut want break lose

• 
  @albertgallo4451 Жыл бұрын

  So I guess with an aftermarket stereo I'm screwed

• 
  @youngc8930 Жыл бұрын

  Wanted to know why it takes 2.8 hours to replace the belt tensioner and he didnt show that

• 
  @jsamerican38 Жыл бұрын

  Where did you get it painted at?

• 
  @jsamerican38 Жыл бұрын

  Can you add the links

• 
  @lookingupwards8652 Жыл бұрын

  Ok I have this code. So I replaced the engine water pump and yes it was frozen. Now I cleared the code and it keeps coming back ?????

• 
  @racerx9223 Жыл бұрын

  So uh, and umm..

• 
  @ringa8600 Жыл бұрын

  Crap... I have an aftermarket radio and somehow turned the loud chime on