At Zunsport, we have built an enviable reputation as a specialist provider of stainless steel car grilles, and over the past 10 years we have been designing, producing and supplying grille sets to car owners and major car manufacturers alike.
Can i get kidney grilles as well please? Even if its special order?
@jonarchdeacon37612 ай бұрын
Sexy intro music!!!
@sabrinaharrington84063 ай бұрын
'PromoSM' 😈
@KeokiDude4 ай бұрын
This product is excellent. I just installed it in about 5 minutes on my 718 Boxster and I love it.
@graham4235 ай бұрын
Just installed these on my M2 (Left and right only, center is always out of stock…) Love the way they look but it was not as easy as this video makes it seem. The clips have to be forced back pretty far to clip in place and if you slip with your screwdriver you will easily damage your plastic intakes. I recommend putting some kevlar tape or rubber grommet over the head of your screwdriver before doing this to prevent damage. Love the product though, thanks autoid
@jasonkennedy20456 ай бұрын
Thanks guys, fitting mine today 👍 Be great to know when / if you are going to do a front mesh grill for the centre for cars with the “cyclops” front eye. Cheers 🍻
@scottyk3296 ай бұрын
Will radar cruise control still work if equipped?
@caprisunmonke17766 ай бұрын
I have the same question @zunsport
@Zunsport5 ай бұрын
Hello, yes it will. It has been tested and the grille doesn’t affect the cruise control sensors
@joebarron92206 ай бұрын
Curious what are you screwing into?
@user-ky4it8ic7w7 ай бұрын
gibt es das auch für ein GT3 991,2 ?
@keng40669 ай бұрын
I bought one of these which cost me AU$245 delivered[1 of 2]. It's well made but the fitting screws are totally inadequate. I didn't use a power tool after seeing how thin the plastic is that the small screws are threading into. Even when carefully screwed in by hand there is very little feel of any tightening effect when the screws pull the grill against the plastic. I have an engineering background and did this as carefully as possible. There is no way i'm going to leave it as it is and will be looking for either larger screws or some other way to reinforce the fitting point so that the grill is secure. The grill looks really good when fitted as per instructions and i'm stoked with that but i'm not going to risk it falling off or being dragged under the front of the car. For anyone else interested I ended up getting some 6G self tapping screws to replace the 4G supplied. The heads just fit through the opening and I could feel the grill being held firmly in place before I stopped applying any more torque and spoiled the fix. I would call this just satisfactory but a huge improvement on what was supplied. Looks great and best of all will stop anything big enough to cause damage from getting through.
@Zunsport9 ай бұрын
Hello, we are sorry to hear that you are not 100% satisfied. We have sold a number of these grilles and not had any feedback regarding the fitment. if you are still having trouble with fitment please drop us an email.
@keng40669 ай бұрын
It looks fine fitted as per the video, rather than behind the centre section, really good but it does need more substantial screws or even better, captive nuts to screw into as above.
@Zunsport9 ай бұрын
Hello, all of our grilles fit from the front for ease of fitment (no removal of bumpers /other parts) and this looked the best
@bertwhetstone317310 ай бұрын
So I just installed these, side grills and also the center grill with the gap for the radar. This video helped. I doubt many people out there are installing these for styling - we install these because it's only a matter of time before some road debris intrudes into the radiator fins or destroys the louvers. I kind of blame Porsche because my girlfriend's 2010 Beetle has a factory grill on it, why not the 992 which obviously has the same need? I had hoped these would have some kind of non-destructive adjustable tensioners that somehow hooked behind the grill without the need to tap a screw into a panel, but as I mentioned before the damage to a radiator or the front camera is a lot less desirable than a tiny hole in plastic. Worst case if you had to remove these you could fill up the hole with something and sharpie over it. Once attached they look fine, they seem firmly attached when screwed on and although I suspect a larger object might knock one loose I think it would still be protection enough to save you significant damage. One installation tip: I recommend bending the lower hook arm down before you try to install it. This will make it catch more easily on the lip of a panel edge back there without trying to pull the grill and also push it down with a screwdriver. In my case it sort of clicked into place as I pushed the grill in, and then I pulled the grill slightly to make sure it was hooked under.
@Zunsport10 ай бұрын
Thanks so much for your feedback!
@robertridgeway595110 ай бұрын
Does this affect the function of the adaptive cruise control?
@caionunes712110 ай бұрын
Ugly
@alsanpi11 ай бұрын
Hi, is this still for sale? I would like to buy one for a pre facelift 2018 w205 C63S
Sorry Zunsport, but these grilles are far harder to fit than this video suggests. Yes, I have front parking sensors but after trying on more than one occasion, following the instructions and video tutorials I have given up, mainly for fear of damaging the bodywork and/or sensors of my car. Shame, as I thought they'd make a valuable addition to the car.
Are these still available? I cannot find them on your site but definitely need them!
@Zunsport Жыл бұрын
Hey, yes they can be found here; www.zunsport.com/en/product/product?product_id=6026&search=macan%20gts
@cnote678 Жыл бұрын
@@Zunsport do you have to install the top grille to install the lowers? My car already has solid plastic at the top section so the top grille would be pointless, just need the lower and center grills. Car is a 21 Macan GTS.
@stephenauty2402 Жыл бұрын
Piss poor
@scott4101 Жыл бұрын
But how do you remove the stock plastic covers before you fit your grille set? Thanks
@Zunsport Жыл бұрын
Our grilles fit over the OEM
@addersladders2957 Жыл бұрын
Is the Zun Sport logo removable please?
@Zunsport Жыл бұрын
You can order the grille badge less :)
@vaultertim Жыл бұрын
As far as instructional videos go, this is appalling. It would have been far more useful if you’d started with how to fit the various clamps to the grilles - easy enough but not for everyone. It’s also WAY simpler if you remove the vents first, also a very easy task and FAR simpler to fit the grilles with them removed. Then all you have to do is snap them back into place once the grilles are fitted. This video is a waste of time.
@jschrauwen Жыл бұрын
Do you have pre-facelift (2007-2011) R8 items?
@bonne1592 Жыл бұрын
Not so easy..
@Zunsport Жыл бұрын
Hello there! If you are having issues fitting our grilles please do feel free to contact us and we can assist you further :)
@paul5.2r Жыл бұрын
Yeah these things do not just clip to the openings in the bumper. The mesh is larger than the openings so it’s pushing and bending the bumper trying to wedge these in.
@skippynj197928 күн бұрын
I just put mine in... Went in without one problem.. perfect fit.. took five minutes.
@bmerfan Жыл бұрын
You can do a better fitting video than that.. come on Zunsport!
@Zunsport Жыл бұрын
Hi Neil, if you are having trouble fitting our grilles please do feel free to contact us and we can assist you further :)
@neilharrison9072 Жыл бұрын
Should have been fitted from new -design flaw
@itifonhom2 жыл бұрын
So, these screws go right into the intercooler blades?
@Zunsport Жыл бұрын
No, they go into the plastic aperture surround
@FR-ku2bb Жыл бұрын
@@Zunsport 🙄🤔 behind the screws there are just intercooler blades
@Zunsport Жыл бұрын
@@FR-ku2bb They do not go into the intercooler
@AudioFlat Жыл бұрын
Where the screws go there is just solid plastic trim. The intercooler is distanced behind this. The opening looks bigger than it really is.
@Jonathan_Doe_2 жыл бұрын
Are these strong enough to allow most of the hexagon section of the lower grill to be cut away? Mines already fallen victim to a small pebble (not even joking, I saw it get kicked up by the car in front, it was 2cm, standard grills a joke)
@Zunsport2 жыл бұрын
Hello, we fit our grilles on top of the OEM grille.
Does it obstructs with the louver movement when it is closing & opening ?
@rodneyapcar93842 жыл бұрын
Easy fit, some of the clips need manipulation with long thin flathead screwdriver to seat behind plastic horizontal fins
@adamhargrave2773 Жыл бұрын
Would you say the grille could be easily fitted/removed once a year, to have it on just during Autumn/Winter? Thanks :)
@rodneyapcar9384 Жыл бұрын
@@adamhargrave2773 No too hard
@rodneyapcar9384 Жыл бұрын
@@adamhargrave2773 I live in Australia, 0 C to 40 C.Stays on there are stones, birds, twigs all year round
@MartinJakobs Жыл бұрын
It looks like I have to drill I to the bumper? Is that a thing?
@Zunsport2 жыл бұрын
Get your Electric vehicle protected today with a Zunsport grille www.zunsport.com/en/zunsport-ev-grilles and use discount code - YT261022
@alexstefan49112 жыл бұрын
Can you please confirm that it's safe to drill the N06 screws through this plastic part behind the grill please?
@Zunsport2 жыл бұрын
Hi Alex can you message [email protected] they will sort things out for you
@Zunsport2 жыл бұрын
If you are looking For *Mercedes AMG radiator car grilles* visit the link www.zunsport.com/en/Mercedes-Grilles and use discount code MB171022 to collect your special discount
@derrickgreen90202 жыл бұрын
I’ve got these in black fitted to my Porsche Cayman S outer radiators and central air scoop against cobalt blue bodywork…..and they look fantastic! No cable ties😖, just discrete clips. All Porsches should have them.
Пікірлер
Where can i purchase this from?
Hi, where did you get these ?
Hello, www.zunsport.com/en/
Can i get kidney grilles as well please? Even if its special order?
Sexy intro music!!!
'PromoSM' 😈
This product is excellent. I just installed it in about 5 minutes on my 718 Boxster and I love it.
Just installed these on my M2 (Left and right only, center is always out of stock…) Love the way they look but it was not as easy as this video makes it seem. The clips have to be forced back pretty far to clip in place and if you slip with your screwdriver you will easily damage your plastic intakes. I recommend putting some kevlar tape or rubber grommet over the head of your screwdriver before doing this to prevent damage. Love the product though, thanks autoid
Thanks guys, fitting mine today 👍 Be great to know when / if you are going to do a front mesh grill for the centre for cars with the “cyclops” front eye. Cheers 🍻
Will radar cruise control still work if equipped?
I have the same question @zunsport
Hello, yes it will. It has been tested and the grille doesn’t affect the cruise control sensors
Curious what are you screwing into?
gibt es das auch für ein GT3 991,2 ?
I bought one of these which cost me AU$245 delivered[1 of 2]. It's well made but the fitting screws are totally inadequate. I didn't use a power tool after seeing how thin the plastic is that the small screws are threading into. Even when carefully screwed in by hand there is very little feel of any tightening effect when the screws pull the grill against the plastic. I have an engineering background and did this as carefully as possible. There is no way i'm going to leave it as it is and will be looking for either larger screws or some other way to reinforce the fitting point so that the grill is secure. The grill looks really good when fitted as per instructions and i'm stoked with that but i'm not going to risk it falling off or being dragged under the front of the car. For anyone else interested I ended up getting some 6G self tapping screws to replace the 4G supplied. The heads just fit through the opening and I could feel the grill being held firmly in place before I stopped applying any more torque and spoiled the fix. I would call this just satisfactory but a huge improvement on what was supplied. Looks great and best of all will stop anything big enough to cause damage from getting through.
Hello, we are sorry to hear that you are not 100% satisfied. We have sold a number of these grilles and not had any feedback regarding the fitment. if you are still having trouble with fitment please drop us an email.
It looks fine fitted as per the video, rather than behind the centre section, really good but it does need more substantial screws or even better, captive nuts to screw into as above.
Hello, all of our grilles fit from the front for ease of fitment (no removal of bumpers /other parts) and this looked the best
So I just installed these, side grills and also the center grill with the gap for the radar. This video helped. I doubt many people out there are installing these for styling - we install these because it's only a matter of time before some road debris intrudes into the radiator fins or destroys the louvers. I kind of blame Porsche because my girlfriend's 2010 Beetle has a factory grill on it, why not the 992 which obviously has the same need? I had hoped these would have some kind of non-destructive adjustable tensioners that somehow hooked behind the grill without the need to tap a screw into a panel, but as I mentioned before the damage to a radiator or the front camera is a lot less desirable than a tiny hole in plastic. Worst case if you had to remove these you could fill up the hole with something and sharpie over it. Once attached they look fine, they seem firmly attached when screwed on and although I suspect a larger object might knock one loose I think it would still be protection enough to save you significant damage. One installation tip: I recommend bending the lower hook arm down before you try to install it. This will make it catch more easily on the lip of a panel edge back there without trying to pull the grill and also push it down with a screwdriver. In my case it sort of clicked into place as I pushed the grill in, and then I pulled the grill slightly to make sure it was hooked under.
Thanks so much for your feedback!
Does this affect the function of the adaptive cruise control?
Ugly
Hi, is this still for sale? I would like to buy one for a pre facelift 2018 w205 C63S
Hey, YES! Please find attached - www.zunsport.com/us/mercedes-amg-c63-facelift-w205-front-grill-set?search=c63%20amg
Please be more detailed with the scrivet insert
🙂 Promo-SM
Why add a screen door to the front of your car? On top of thr plastic mesh thats there too? Looks horrid.
Where can you buy these? Can’t see them on the website?
www.zunsport.com/en/porsche-997.1-c4s-front-grille-set
How do the grills stay in place?
By the clips which hook into the aperture
This video does not apply to what they sell in 2023. Bottom has clips, not screws.
Biggest issue is the clips and this does not cover that.
this doesn’t help
Hello there, if you would like some more info you can email us :)
great video
where did you get the cover kit for your crossfire and how much did it cost.., im thinking of installing my own also
Find attached link: www.zunsport.com/en/chrysler-crossfire-retractable-trunk-cover-Black?search=crossfire
Sorry Zunsport, but these grilles are far harder to fit than this video suggests. Yes, I have front parking sensors but after trying on more than one occasion, following the instructions and video tutorials I have given up, mainly for fear of damaging the bodywork and/or sensors of my car. Shame, as I thought they'd make a valuable addition to the car.
How much is this for 971 Panamera?
www.zunsport.com/en/porsche-panamera-971-lower-grille?search=971
Очень интересно, но ничего не понятно
Are these still available? I cannot find them on your site but definitely need them!
Hey, yes they can be found here; www.zunsport.com/en/product/product?product_id=6026&search=macan%20gts
@@Zunsport do you have to install the top grille to install the lowers? My car already has solid plastic at the top section so the top grille would be pointless, just need the lower and center grills. Car is a 21 Macan GTS.
Piss poor
But how do you remove the stock plastic covers before you fit your grille set? Thanks
Our grilles fit over the OEM
Is the Zun Sport logo removable please?
You can order the grille badge less :)
As far as instructional videos go, this is appalling. It would have been far more useful if you’d started with how to fit the various clamps to the grilles - easy enough but not for everyone. It’s also WAY simpler if you remove the vents first, also a very easy task and FAR simpler to fit the grilles with them removed. Then all you have to do is snap them back into place once the grilles are fitted. This video is a waste of time.
Do you have pre-facelift (2007-2011) R8 items?
Not so easy..
Hello there! If you are having issues fitting our grilles please do feel free to contact us and we can assist you further :)
Yeah these things do not just clip to the openings in the bumper. The mesh is larger than the openings so it’s pushing and bending the bumper trying to wedge these in.
I just put mine in... Went in without one problem.. perfect fit.. took five minutes.
You can do a better fitting video than that.. come on Zunsport!
Hi Neil, if you are having trouble fitting our grilles please do feel free to contact us and we can assist you further :)
Should have been fitted from new -design flaw
So, these screws go right into the intercooler blades?
No, they go into the plastic aperture surround
@@Zunsport 🙄🤔 behind the screws there are just intercooler blades
@@FR-ku2bb They do not go into the intercooler
Where the screws go there is just solid plastic trim. The intercooler is distanced behind this. The opening looks bigger than it really is.
Are these strong enough to allow most of the hexagon section of the lower grill to be cut away? Mines already fallen victim to a small pebble (not even joking, I saw it get kicked up by the car in front, it was 2cm, standard grills a joke)
Hello, we fit our grilles on top of the OEM grille.
Great photos of wiring, very helpful thanks
What do the screws go into?
Where can I buy one
www.zunsport.com/en/Peugeot-Boxer-3rd-Gen-Facelift-Upper-Grille?search=boxer
Does it obstructs with the louver movement when it is closing & opening ?
Easy fit, some of the clips need manipulation with long thin flathead screwdriver to seat behind plastic horizontal fins
Would you say the grille could be easily fitted/removed once a year, to have it on just during Autumn/Winter? Thanks :)
@@adamhargrave2773 No too hard
@@adamhargrave2773 I live in Australia, 0 C to 40 C.Stays on there are stones, birds, twigs all year round
It looks like I have to drill I to the bumper? Is that a thing?
Get your Electric vehicle protected today with a Zunsport grille www.zunsport.com/en/zunsport-ev-grilles and use discount code - YT261022
Can you please confirm that it's safe to drill the N06 screws through this plastic part behind the grill please?
Hi Alex can you message [email protected] they will sort things out for you
If you are looking For *Mercedes AMG radiator car grilles* visit the link www.zunsport.com/en/Mercedes-Grilles and use discount code MB171022 to collect your special discount
I’ve got these in black fitted to my Porsche Cayman S outer radiators and central air scoop against cobalt blue bodywork…..and they look fantastic! No cable ties😖, just discrete clips. All Porsches should have them.