Пікірлер

• 
  @ChiemeziemBethel4 ай бұрын

  Hi sir

• 
  @user-or9em2ts5p7 ай бұрын

  Hey I was wondering could you do videos for preventative maintenance and oiling and installing the cap driver on the Tajima TMEZ?

• 
  @Fil-Mecanique10 ай бұрын

  Hello David ben Emanuel Fisher I am a sewing machine repairer in France, and I would like to reproduce your experience with the same pattern as the one you used in your video in order to reach the same conclusions as you, going a little further. On my channel, I dismantle the machines to show what's inside, understand how it works and why one model would be better than another. Since the beginning of my channel, I have wanted to make the comparison between a PR and an SAI. Last week, a customer took one to me for repair. The opportunity for me to disassemble the two machines and make a point-by-point comparison. The question then arises about the embroidery test to do. I said to myself that the best thing was to contact you to ask if you would agree to send me the same reason as the one you used in order to maintain "scientific" consistency and to show that your video is not bullshit. Of course, I would cite you as well as the video and your channel on my own video and I would reference you in the link in the description. I thank you in advance Wilk-Teste Thibaut, Fil-Mécanique

• 
  @Davidfisheremb9 ай бұрын

  I don’t have the design

• 
  @tribekm3599 Жыл бұрын

  where can i get the cpu card for this machine

• 
  @Davidfisheremb Жыл бұрын

  Find you nearest Tajima agent they can source one for you www.tajima.com/distributor/

• 
  @MrPumas085 Жыл бұрын

  Changed reciprocator on a 97 tajima tmexc1201 and neddle will not move. How could I fix it? Thank you

• 
  @Davidfisheremb Жыл бұрын

  1. Make sure it’s a Reciprocator for a single head not the same as do a multi head on this model. 2. Try getting hold of a complete re reciprocator set it’s much easier than just changing the reciprocator itself.

• 
  @VanityFerret Жыл бұрын

  Great hands on tip!

• 
  @tyagisahib Жыл бұрын

  Hello

• 
  @Davidfisheremb Жыл бұрын

  Hello

• 
  @chuongnguyen9212 Жыл бұрын

  Tajjima for sure

• 
  @Clark42EoC Жыл бұрын

  Thank you you're the only good source of info on this.

• 
  @Davidfisheremb Жыл бұрын

  Glad I could help

• 
  @gregorybrown6799 Жыл бұрын

  Thank You Preventative Maintenance is so important. Great video

• 
  @user-du2zd9cg6x2 жыл бұрын

  Hello, I ask you to help me. I have a Maya embroidery machine made in the year 2020. I tried to set the needle shaft to 174 according to the electronic setting option in the machine screen, which is the option to put the needle down, but it was not set with me, unfortunately. Please help me in this matter

• 
  @Davidfisheremb2 жыл бұрын

  Not so familiar with that model but lower dead point is set using the needle bar connecting stud and it should be 178 degrees for a bridge machine and 180 degrees for an arm machine and then the top dead centre must be set to 0 degrees you can hit do the one setting you need to do both

• 
  @jsinope27862 жыл бұрын

  Thank you! I’ve used this video a few times and it is very well done.

• 
  @vinaykumartripathi23402 жыл бұрын

  Very nice 👍👍

• 
  @KaajalVaghelaKC2 жыл бұрын

  Thank you Dov for sharing this! It's been such a pleasure having you help me build the embroidery department and be an amazing family friend to us 🙏🏾

• 
  @Davidfisheremb2 жыл бұрын

  My pleasure glad to be part of such a great family team !

• 
  @blmlb632 жыл бұрын

  It the Tajimi auto threading

• 
  @Davidfisheremb2 жыл бұрын

  No Auto threading is for domestic machines not industrial machines.

• 
  @TheBizzyBScience3 жыл бұрын

  LOL The Tajima is twice as fast!

• 
  @Davidfisheremb3 жыл бұрын

  Tajima has no real rival

• 
  @karenramirez72253 жыл бұрын

  @@Davidfisheremb which model tajina js this? Is it the Juki tajima 8 needle?

• 
  @poppydarmawan51453 жыл бұрын

  This comparison is very helpful. We understood that the high RPM advertised by Brother is valid for 1-5 mm stitch lengths only, and the speed will automatically drop depending on the stitch length - like in this video. While Tajima SAI's 800 RPM speed is much more consistent for small to wide stitch lengths, although it will also drop when sewing wider stitches - but not as drastic as Brother's.

• 
  @Davidfisheremb3 жыл бұрын

  Poppy you are right , basically Tajima technology is passed down from their industrial machines , and Brothers Technology is based on there domestic machines.

• 
  @josephineduro60953 жыл бұрын

  The hook cover

• 
  @Davidfisheremb3 жыл бұрын

  ?

• 
  @kamelchikhabelgacem55023 жыл бұрын

  173° ?

• 
  @kamelchikhabelgacem55023 жыл бұрын

  173° ?

• 
  @Davidfisheremb3 жыл бұрын

  arm machine is 180 deg and Bridge machine 178 deg - lower dead point .Top dead point 0 deg on all machines.only exception is TMAR-KC machine type 1

• 
  @kamelchikhabelgacem55023 жыл бұрын

  @@Davidfisheremb thanx

• 
  @147alfaluigi3 жыл бұрын

  buona giorno ragazzi ho un problema con una tajima TEHX-c1501 prima mi faceva un rumore come fosse un motore pass pass poi lo spenta e lo riaccesa e mi esce il software e mi rimane bloccata con M:V0.5 e non si muove nessun tasto cosa fare grazie

• 
  @Davidfisheremb3 жыл бұрын

  El programa del sistema operativo no se carga. 1.Vuelva a cargar el software / programa operativo

• 
  @Davidfisheremb3 жыл бұрын

  For more than 8 Colours you need to plan your production so that you can manually pull another color through on a color that has completed stitching .

• 
  @deniselindow44133 жыл бұрын

  I wish they stopped and showed the stitch quality between the 2 machines.

• 
  @Davidfisheremb3 жыл бұрын

  If you think logically- Brother have gone from making domestic sewing machines and now make a commercial machine -besides all the other equipment that they manufacture.Tajima has gone from making industrial embroidery machines and used that same technology to make a commercial machine -Tajima only make embroidery machine no other equipment .The Tajima to give a better end result without fail.

• 
  @MichaelRHead-zv2zf3 жыл бұрын

  my reciprocator is sitting to high. how do i adjust it?

• 
  @Davidfisheremb3 жыл бұрын

  If it’s a bridge type machine you need to turn it to the lower dead position - 178deg and adjust the top collar - this should really be done with a pick gauge , but if you do not have one if you are persistent you will hit the sweet spot . This is the point where the reciprocator goes up regards less of the direction that you turn the shaft

• 
  @ashwathnarayan85903 жыл бұрын

  9901127694

• 
  @balladares993 жыл бұрын

  Ninguno quiero comprarme una del 2012

• 
  @Davidfisheremb3 жыл бұрын

  Donde estas viviendo?

• 
  @Davidfisheremb3 жыл бұрын

  si se encuentra en América del Sur, tengo a alguien que puede ayudarlo a enviar su dirección de correo electrónico y le enviaré sus datos de contacto

• 
  @balladares993 жыл бұрын

  @@Davidfisheremb Ecuador pero cuantame q experiencia tienes con estas maquinas

• 
  @Davidfisheremb3 жыл бұрын

  ​@@balladares99 I have worked with Tajima for the past 30 years. I have received product and technical training from Tajima. I have 7 years of experience running a factory with 150 heads and 23 years of experience as a supplier of the Tajima embroidery machine. In my opinion, Tajima has no match in machine quality and embroidery quality , its the best machine money can buy.

• 
  @balladares993 жыл бұрын

  Buenas noches q tal salen estas maquinas q problemas dan

• 
  @Davidfisheremb3 жыл бұрын

  que problemas estas teniendo Envíame el modelo de la máquina y la descripción del problema, intentaré avisar a [email protected]

• 
  @balladares993 жыл бұрын

  @@Davidfisheremb arriva respondí

• 
  @Davidfisheremb3 жыл бұрын

  @@balladares99 www.representacioneswit.com/

• 
  @balladares993 жыл бұрын

  @@Davidfisheremb si los conozco, gracias

• 
  @Davidfisheremb3 жыл бұрын

  He trabajado con Tajima durante los últimos 30 años. He recibido formación técnica y de productos de Tajima. Tengo 7 años de experiencia dirigiendo una fábrica con 150 cabezas y 23 años de experiencia como proveedor de la máquina de bordar Tajima. En mi opinión, Tajima no tiene rival en calidad de máquina y calidad de bordado, es la mejor máquina que el dinero puede comprar.

• 
  @garycrumrine95383 жыл бұрын

  What is the cost difference

• 
  @Davidfisheremb3 жыл бұрын

  You need to price it in your location

• 
  @serkancelik17824 жыл бұрын

  hello everyone i have a problem After the embroidery machine works, the thread is wrapped around the working needle. How can I fix this problem? I would appreciate if you help.

• 
  @Davidfisheremb4 жыл бұрын

  serkan çelik 1.make sure that the thread is going through the take up spring correctly. 2.check that the hook timing is correct 198 deg to 200 deg. Check that the space between the hook point and the needle is not too much .

• 
  @ismailrochadi26534 жыл бұрын

  🖒

• 
  @trinhoan94164 жыл бұрын

  Ở đâu vậy b gia nhiu b

• 
  @Davidfisheremb4 жыл бұрын

  Go to - www.Tajima.com for an agent in your country

• 
  @iammakulbek4 жыл бұрын

  Hello, I am a student from Kyrgyzstan. Now I interesting in this business, so I need help and consultation. Can we communicate? plz, if it is possible. my what's up +996772184591 or [email protected]

• 
  @veemichalow26674 жыл бұрын

  Contact the following company in your region -

• 
  @Davidfisheremb4 жыл бұрын

  I HAVE SENT YOU AN EMAIL

• 
  @kimjong19584 жыл бұрын

  I prefer Ricoma over anything based on the accessories you get at the set price but what the actual fuck, the Brother PR1050X goes up to 1000 spm, you put it on a slower speed setting which is obvious.

• 
  @Davidfisheremb4 жыл бұрын

  Your analysis is too simple the longer satin stitch is what drops the average speed lower as the stepping motors can only move at a certain maximum speed,The Tajima operating software that controls the superior quality stepping motors is what allows the Tajima to be quicker than other models, as well as the speed of the colour change mechanism. This is a result of Tajima;s Superior R&D.Keep in mind Brothers priority product is not Embroidery machines its Printers, so the focus is lost.

• 
  @JoeMalovich3 жыл бұрын

  Ricoma is known for shady advertising, I would take this comment with a grain of salt.

• 
  @Davidfisheremb3 жыл бұрын

  Speed setting is the same it’s the long stitch that it has to slow down more than the Tajima because of the size and quality of the stepping motors for X and Y as well as software

• 
  @richardlopez59923 жыл бұрын

  You can get all kinds of accessories, but if the machine is crap 💩 then that won’t help you much

• 
  @gainzwillbemade98903 жыл бұрын

  Ricoma is biased and based on the reviews it's a 50/50 chance you'll get a bad machine. I'm thinking about the Happyjapan and the Tajima. I been x the brother machines soon as I found out they don't keep a consistent speed.

• 
  @premgiri99924 жыл бұрын

  GOOD MORNING SIR ..my work experience 12 years .is there a job your embroidery. I am work in Tamil nadu. Now I am in Kuwait

• 
  @Davidfisheremb4 жыл бұрын

  Prem Giri I am selling and repairing the embroidery equipment for a company this is a customer of mine in Lesotho so it’s not possible for me to arrange employment -Sorry

• 
  @ibrahimkho25484 жыл бұрын

  Hi im ibrahim I'm working imbrodre

• 
  @harisankargod74464 жыл бұрын

  Are you made..

• 
  @Davidfisheremb4 жыл бұрын

  Yes made by Mid I think ?

• 
  @recepbaser80784 жыл бұрын

  Before I forget I owe you big THANK YOU . with your videos couple times i have been able to fix my machine which my employee broke . Thanks a lot all your videos . i watch all of them even though i do not have the same type of machine just for knowledge i watched them all . You are the only and best one who makes great explanation about how to fix problem on tajima machines . THANK YOU SO MUCH .

• 
  @Davidfisheremb4 жыл бұрын

  Hi Glad they were helpful

• 
  @recepbaser80784 жыл бұрын

  Hi there , I have Tajima Tejt II- C1501 and I am having a Stop Position Error Code 211 . Can you make a video about how to fix this problem ? Let me explain what happening . First of all when you turn it on the machine first screen shows frame type (FLAT) and initialize (on) part when you hit the set it is giving this error , when you hit the X sign which is cancel or stop job button screen shows that needle is not on the position which supposed to be . manually on the shaft I bring the needle on the screen and now you are able to see the needle number you are going to work on but when you hit the set button again it gives the same error code . Can you please make a video about that ? I really needed . There is no technicians around me and i need this machine to work .

• 
  @Davidfisheremb4 жыл бұрын

  recep başer glad it's helped !

• 
  @recepbaser80784 жыл бұрын

  i fixed the error code 211 . but now the needles are jumping idk how to fix that i know how to adjust neede bars they all the same upper point and lower point i already adjust it but still they are jumping . another problem that i saw when the machine turned on usually when u push the presser food it should go down and lock itself but . noe its not moving what might cause that ?

• 
  @user-jq9cy1pc9h4 жыл бұрын

  And where is the whole presentation video?

• 
  @Davidfisheremb4 жыл бұрын

  If I am understanding correctly, this is still a concept machine is not yet in Production

• 
  @pedroolivaresmercado77385 жыл бұрын

  hola nesecito manual de despieze de la bordadora 1201o un video como se cambian los cuchillos

• 
  @Davidfisheremb5 жыл бұрын

  You need to change both the Fixed knife and the movable knife, then you adjust the 2 until it is manually cutting .The fixing of the fixed knife is where you need to focus. Debe cambiar tanto la cuchilla fija como la cuchilla móvil, luego ajustar el 2 hasta que se corte manualmente. La fijación de la cuchilla fija es donde debe enfocar.

• 
  @nirajkumarnirajbageva61715 жыл бұрын

  Very nice

• 
  @josegameplaytv65965 жыл бұрын

  Cuelga más videos de esa maquina por favor

• 
  @allinonekhaliqallahbaghwan87005 жыл бұрын

  is there a job your embroidery my work experience 20 years old i am a wilcom designer ES 2006 ,e2 10 years of experience

• 
  @mahboobhgftefngdalam5 жыл бұрын

  A

• 
  @mahboobhgftefngdalam5 жыл бұрын

  YeS

• 
  @islamicbd50855 жыл бұрын

  So very Nice

• 
  @roserodgers91135 жыл бұрын

  So which would you recommend??

• 
  @Davidfisheremb5 жыл бұрын

  Rose Rodgers consider this , Tajima have taken their R and D from their industrial machines and developed a commercial embroidery machine Brother are coming from domestic machines and developing a commercial machine The Tajima can not be matched

• 
  @chiraggohil1705 жыл бұрын

  Dear sir... Pls share ur email id for maintanance query purpose

• 
  @Davidfisheremb5 жыл бұрын

  [email protected]

• 
  @gagalngetoptv6 жыл бұрын

  It;s the F1 of single head. Damn it's fast !!!

• 
  @gagalngetoptv6 жыл бұрын

  How much you buy for Tajima TAI ?

• 
  @Davidfisheremb6 жыл бұрын

  ZAR 125 000.00 plus VAT

• 
  @gagalngetoptv6 жыл бұрын

  It should work. Cost twice the china made. Hope could buy Tajima. Post more video of your work. Subscribed your channel for more video :)

• 
  @Davidfisheremb6 жыл бұрын

  wILL LAST THREE TIMES LONGER AS THE CHINA MADE .Also production and stitch quality better.Thanks for Subscribing

• 
  @karenramirez72253 жыл бұрын

  @@Davidfisheremb I am about to pull the trigger and purchase A Tajima Sai but there aren't too many tutorials or videos out there to learn the machine, would you mind making more videos of the SAI machine please? THAT WOULD BE EXTREMELY HELPFUL👏

• 
  @rachelle4662 ай бұрын

  @@karenramirez7225 In the same position now, did you get the tajima sai?

• 
  @Davidfisheremb6 жыл бұрын

  Not only about Rotational speed it’s the speed and efficiency of the colour change and trimming action

• 
  @kcjd86592 жыл бұрын

  How does the stitch quality compare on these two machines?

• 
  @bartmarstboom81376 жыл бұрын

  What if you change the acceleration speed at the PR1050x? what is the time then??

• 
  @Davidfisheremb3 жыл бұрын

  It’s the long stitches that The brother has to slow down much more than Tajima even though set at the same rotational speed