I have had a tp5 b for about three years now. Really like it but it is kinda tippy. Do you find the to 6 b to be tippy?
@narutobroken11 ай бұрын
Is the 6B basically the LC just without a lid?
@narutobroken11 ай бұрын
Is the TP6B basically the TP-LC with no lid?
@maximilianmeyer38536 ай бұрын
Yes
@Diaz144 Жыл бұрын
What is that case you had in the middle of the bag called?
@donaldpainter956 Жыл бұрын
Those electrical lock nut wrench are very handy to have but alot of people have never seen them better than screwdriver and pliers
@tedmcdonald3377 Жыл бұрын
😎🛠️😎🛠️😎
@SMFFL100 Жыл бұрын
I took the wheels and telescoping handle off an old suit case and mounted it to the same set of torches, you have here. It's made life so much easier. No more lugging it around.
@MORGANSMaintenance Жыл бұрын
Nice setup 👍
@tedmcdonald3377 Жыл бұрын
😎🛠️😎🛠️😎
@SIR_TOOLS Жыл бұрын
Hell yeah man that's bad ass!
@SIR_TOOLS Жыл бұрын
How you like it so far
@HVAC_Bully Жыл бұрын
Where can you get those cards that you keep in the back pocket?
@tradesmithedc Жыл бұрын
Ac service tech sells them. The Amazon link is a.co/d/doJ0V8b
@joelsadowsky3436 Жыл бұрын
It’s good if you never have to pull it up the side of a building
@Michael_Wright Жыл бұрын
Looks like every old apartment complex or rent house.
@Arm36693 Жыл бұрын
Will it fit in a veto tech pac?
@ravender8930 Жыл бұрын
Shoulda got Toughbuilt😢
@SuperDanny1117 Жыл бұрын
I agree to your “rarely using high side gauge” statement I’m the same way
@Brokefootchuck Жыл бұрын
"High side"?
@benwaterson8867 Жыл бұрын
@@Brokefootchuckhigh pressure of hvac gauges id imagine
@jjsifo12 ай бұрын
Those are the old manifolds ,usually automotive high side is a 1970's thing, but still valid.
@DavidReyes-ge2le Жыл бұрын
Can you attach it to a tool belt like the tp5b?
@mrmethodx Жыл бұрын
No
@Michael_Wright Жыл бұрын
Cool to see them side by side, looking forward to trying the 6B - the XL is too large for me (who runs service calls) if I was gonna carry something that size I'd just go back to the original MC. Hoping the TP6B is the perfect imbetween from something like the TP-XL and the TP4B....but lighter than a loaded MC.
@MotoRiff77 Жыл бұрын
I'm going to stick with my TPLC just because my bags fall over so much and I don't lose my tools
@THETIMINATORTHETOOLMAN Жыл бұрын
good video. just wanted to let you know I had to turn my sound all the way up on my laptop to hear you. Not sure why the sound was real low. Great load out. I just ordered this bag. I will do a video of it myself on my channel. I subscribed as well. good luck on your youtube channel.
@staxbux Жыл бұрын
What’s that packet called? Nice load out!
@ApartmentMaintenance Жыл бұрын
Nice bags. Can't go wrong with veto.
@xtxltd Жыл бұрын
What is the ratchet thing around 2 minutes into the video?
@tradesmithedc Жыл бұрын
Vim tools RFB400K . I can't find another one on Amazon but prestacycle makes one like it.
@xtxltd Жыл бұрын
@@tradesmithedc thank you, I will see what I can find 👍
@onemanwreckingcrew Жыл бұрын
Harbor Freight sells a really great mini racheting kit as well that is pretty much identical to the feature one he has. Plus it comes with a bunch of bits too
@KernowEDC Жыл бұрын
Really nice kit dude! Just a small constructive comment (not meaning to troll at all), if you video in a space with less solid surfaces then your audio will be a little clearer and less echoey. Anyway, really nice and informative video overall. I’ve subscribed and look forward to more tool/EDC related videos! Thanks :)
@tradesmithedc Жыл бұрын
Thank you! I'm working on trying to increase the quality of my videos. I'll have some new stuff coming soon.
@Pablo1on1 Жыл бұрын
Dope 💯
@scrambler350 Жыл бұрын
That's a slick set-up if you use a lot of fittings...or could fill one section up with orange wire nuts and another with locking caps if you're doing a lot of new install or change-outs. I could see myself doing something similar with one of the cases with the foam and using that for my ratcheting benders, flaring/swaging bits, and even a safe place to keep a micro gauge or Nitro Purging regulator!
@Michael_Wright Жыл бұрын
Nice.
@metrowash Жыл бұрын
nice setup!
@tradesmithedc Жыл бұрын
Thanks! I'll be posting the other bags I use soon.
Пікірлер
I have had a tp5 b for about three years now. Really like it but it is kinda tippy. Do you find the to 6 b to be tippy?
Is the 6B basically the LC just without a lid?
Is the TP6B basically the TP-LC with no lid?
Yes
What is that case you had in the middle of the bag called?
Those electrical lock nut wrench are very handy to have but alot of people have never seen them better than screwdriver and pliers
😎🛠️😎🛠️😎
I took the wheels and telescoping handle off an old suit case and mounted it to the same set of torches, you have here. It's made life so much easier. No more lugging it around.
Nice setup 👍
😎🛠️😎🛠️😎
Hell yeah man that's bad ass!
How you like it so far
Where can you get those cards that you keep in the back pocket?
Ac service tech sells them. The Amazon link is a.co/d/doJ0V8b
It’s good if you never have to pull it up the side of a building
Looks like every old apartment complex or rent house.
Will it fit in a veto tech pac?
Shoulda got Toughbuilt😢
I agree to your “rarely using high side gauge” statement I’m the same way
"High side"?
@@Brokefootchuckhigh pressure of hvac gauges id imagine
Those are the old manifolds ,usually automotive high side is a 1970's thing, but still valid.
Can you attach it to a tool belt like the tp5b?
No
Cool to see them side by side, looking forward to trying the 6B - the XL is too large for me (who runs service calls) if I was gonna carry something that size I'd just go back to the original MC. Hoping the TP6B is the perfect imbetween from something like the TP-XL and the TP4B....but lighter than a loaded MC.
I'm going to stick with my TPLC just because my bags fall over so much and I don't lose my tools
good video. just wanted to let you know I had to turn my sound all the way up on my laptop to hear you. Not sure why the sound was real low. Great load out. I just ordered this bag. I will do a video of it myself on my channel. I subscribed as well. good luck on your youtube channel.
What’s that packet called? Nice load out!
Nice bags. Can't go wrong with veto.
What is the ratchet thing around 2 minutes into the video?
Vim tools RFB400K . I can't find another one on Amazon but prestacycle makes one like it.
@@tradesmithedc thank you, I will see what I can find 👍
Harbor Freight sells a really great mini racheting kit as well that is pretty much identical to the feature one he has. Plus it comes with a bunch of bits too
Really nice kit dude! Just a small constructive comment (not meaning to troll at all), if you video in a space with less solid surfaces then your audio will be a little clearer and less echoey. Anyway, really nice and informative video overall. I’ve subscribed and look forward to more tool/EDC related videos! Thanks :)
Thank you! I'm working on trying to increase the quality of my videos. I'll have some new stuff coming soon.
Dope 💯
That's a slick set-up if you use a lot of fittings...or could fill one section up with orange wire nuts and another with locking caps if you're doing a lot of new install or change-outs. I could see myself doing something similar with one of the cases with the foam and using that for my ratcheting benders, flaring/swaging bits, and even a safe place to keep a micro gauge or Nitro Purging regulator!
Nice.
nice setup!
Thanks! I'll be posting the other bags I use soon.