REEVES'S AIRGUNNING REVIEWS
REEVES'S AIRGUNNING REVIEWS
REEVES'S AIRGUNNING REVIEWS is based in Great Britain.
The UK legal Airgun energy limits are Sub 6 Ft/Lb for Air Pistols and Sub 12 Ft/Lb for Air Rifles, recorded at the muzzle.
All my reviews are based on my personal view of UK Airguns, all owned by myself (and the wife, don't forget the wife).
This is not a sponsored channel, so all my views are totally unbiased, and all the Airguns (and related products) are still owned.
Sensible comments and questions are welcome, and if you find this channel interesting, or helpful, please subscribe & like.
Пікірлер
WHERE EXACTLY IS THE SAFETY CATCH?
Hello, which is more accurate, Gamo p900 or Ekol Es 66?
@@Qeetyyt I don’t own a Gamo P900 but as it’s a pellet pistol rather than a BB shooter, I’d say the P900.
Had this gun the cylinder seemed too small for the frame and the grips too big.
I recently got the Dan Wesson full shrouded 6 inch barrel, bb, looks great, worst power I've ever had, new gas bulb, bb actually bounced off a shoot n C target over a pellet catcher target holder, didnt even leave a mark where it hit, never seen anything sadder, bounced off the target, well l say bounced it hit the cardboard flopped to the floor, I've taken it back to have its seal checked, l couldnt believe my eyes, by the way this is the worst part it was only 7 metres due to being in a backyard with limited space. Glad no one saw it it was embarrasing. I could literally spit harder.
I just bought that exact gun and was wondering if you knew of a normal holster that would fit it. Not willing to spend a bloody fortune. Thank You.
@@donaldrush1364 I have one of these in black. It is a fully adjustable holster which the 60DS fits very nice. Mine did come with a matching belt way before Covid. They now do many different finishes. www.amazon.co.uk/LOCAL-LION-Mountaineering-Lightweight-Resistant/dp/B07NPC1SFT/ref=sr_1_15_sspa?crid=DTHRSLVHBNQB&dib=eyJ2IjoiMSJ9.Mvf8VbFRqc6eeUU1jrq10d1tFPeA1T4KILPKCW6mu6FSjDaIcZ9Hx07yJ_5e3bBRhH0UzlKx2YmxiUryzAm7o5TFCIU1Kb36PJIeKh-uw1PpGiqazMJNPsdBYQ-r0OqpadHNrSPcCPhgcn_pm2ibbtf6_4z6FzFKCwjKkISjPP9Tx-biQgA5R-GhKvWqFq04Vnf6EgvSOLC8fAPTyWf09kOg3Bo6_pRUwaX8-r4JrN32_48YyzJVEEVnR7oQCzUTgNbOsas9o3LGJ66Wv6STfYrTr2_MS7dcmIc73IVhI_w.bVi9odBwimgHq13SRFyx_AZNVDZGiGXV71HM5UkoWxQ&dib_tag=se&keywords=Pistol%2Bbelt%2Band%2Bholster&qid=1722177747&s=sports&sprefix=pistol%2Bbelt%2Band%2Bholster%2Csports%2C72&sr=1-15-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&th=1
YOR THE FIRST REVIEWER IV SEEN WITH THIS PROBLEM REEVY, THERES A CHANCE YOU GOT A BAD ONE.
Cocaine Mitch? Is that you?
Looks great with those dark walnut grips.🤠🇺🇸
Nice little device i cant find it on Ali Express, can you provide a link?
www.aliexpress.com/item/1005007327811231.html?spm=a2g0o.productlist.main.1.3d951bdd3WplLt&algo_pvid=b9bbb7d6-6a60-44ef-8155-83635a43b2ed&algo_exp_id=b9bbb7d6-6a60-44ef-8155-83635a43b2ed-0&pdp_npi=4%40dis%21GBP%2187.93%2174.74%21%21%21109.99%2193.49%21%40211b815c17222431291876579eca25%2112000040283949632%21sea%21UK%216018215220%21X&curPageLogUid=y3Bw4rUSNSWz&utparam-url=scene%3Asearch%7Cquery_from%3A
@@reevessairgunningreviews5572 Cant post to my address in the UK?
When your scope is 3x more expensive than your gun...
@@ReMarkAbleMagic The scope was £35 and the rifle £60 in the UK.🇬🇧
Great videos! I bought the Airforceone, looks identical. I can’t get my shots to register, the display just shows LOSE after each shot. The leaflet has no troubleshooting. Any ideas?
@@brianwaites4572 Does it fit properly on the thread so it is tight? I had to modify an adapter to fit mine. I will be posting an update on calibration later using my .25 Cal. BSA Ultra sub 12 Ft/Lb.
@@reevessairgunningreviews5572 Fits snugly, the Airforceone is a bit longer and has a long thread. I’ve tried it on three rifles, it fits all perfectly but all register the same - LOSE, I don’t know what that means, no troubleshooting in the instructions.
@@brianwaites4572 Have you checked the calibration? Is the internal bore clean with the sensor holes visible?
@@reevessairgunningreviews5572 Thank you tons for your help, no I haven’t, I’ll get on and check both in the morning. I wish I could find out what LOSE ment, probably = ERROR maybe? I’ll let you know when I sort it out. Once again cheers!
@@brianwaites4572 Instructions must be pretty bad, though mine didn't come with any at all. let me know how you get on.
Hi my friend. Hope all is well. How has the M29 hold up? Still working well and no issues? Thanks 😃
@@runerebel8441 Hi mate. Just been shooting the 6.5” M29 using RWS Superfield 8.4 grain pellets with the 4.52mm head. Still shooting very well and no issues. Take care.👍
@@reevessairgunningreviews5572 Thanks for the info mate. Take care and have a nice weekend 😃
@@runerebel8441 and you mate.👍
@@reevessairgunningreviews5572 Thanks mate😃
Shells are compatible with the Dan Wesson 715
Shame these are discontinued I only started this back up as a hobby in 2022 and can't find 1 anywhere got the 17 g4 an g5 19 and 19x shame I can't get a 22 to finish them off but great video mr reeves 😊❤
You thought about putting a Scope or Red Dot on it?
@@BigDawg76773 No. I can see the sights fine without needing a Red dot. You can if you prefer though.👍
@reevessairgunningreviews5572 I have a 4×32 scope on mine I was just asking but you're welcome to ✔️ the video 📹
Mehhhhh you might as well get xbg pistol 🔫 19 BBs 6 mags per charge all just $60 CDN pesos. Ooʻoo it's legendary usp but thanks for review 💜 🎉
Where can I find the scope that fits the Umarex HK Heckler & Koch MP5 K-PDW Semi Automatic .177 Caliber BB Gun Air Rifle I have the same air rifle. Thank you for your support.
@@scottbigee I get most of my Red Dots from Optics Warehouse here in the UK.🇬🇧
@reevessairgunningreviews5572 Thank you , but can you tell me what size scope and rails I need, and what name brand .
@@scottbigee This MP5 comes it a 20mm rail adapter that fits on the top. So you will just need a Red dot with a 20mm mount.
@reevessairgunningreviews5572 in the United States, they don't come with the railing in the box.
@@scottbigee I’ll look into that. May find a part number for the adapter or another rail adapter.
this gun is not very good, the pellet rubber spindle keeps jamming pellets
@@techbit7607 The Rubber belt is not too good as after time it wears out. You really need to use a good quality pellet and pre-seat in the belt. The newer White nylon belts are much better, but you still have to pre-seat them otherwise they will move and jam.
@@reevessairgunningreviews5572 thank you for the great tip, what do you mean by pre-seat?
@@techbit7607 put the pellet in the belt, then push the pellet into the belt slightly ( so the pellet is below the belt surface). I use a cocktail stick for this. This should stop the pellet moving while firing. If it’s jammed then some holes may have broken so you will need to get a replacement belt, which are easy to change. The new ones are White nylon, not black rubber. Don’t forget to lubricant the belt with two small drops of oil, check manual.
@@reevessairgunningreviews5572 thank you 🙏
I GOT RID of the silly writing with a air compressor gun, very clean job.
Just picked up that gun. Beautiful. Great review.
Silly fun guns I do like me some replicas. Basically all I shoot thesedays replica fun guns.
Same here buddy
Nice rifle!
Mine arrived today, curious what percentage do you find best for yours (calibration wise) ?
@@Airgunfunrich currently running at 100% but may tweak it after some more testing.
@@reevessairgunningreviews5572 thanks that’s what mine is in at the minute, think I will tweak it to match my LMBR as I trust that more than my fx radar, which of yours do you trust most?
@@Airgunfunrich my FX Radar and LMBR read approximately the same, both having their uses.
@@reevessairgunningreviews5572got my brother to 3d print a spacer for mine today as the thread on my Katran is approximately 12mm
It’s not that great. At x40 the eye box is super tight and darkened really bad! Wish I didn’t get this
the back ring on the chrono is to lock back to end of barrel no need for best fittings part hope this helps. good review
TOPMAN, great channel, great reviews.
nothing like the sound of the old washer to get that rythem going.
Hey, if you could respond a little fast that would be great. So my cocking handle doesn’t go all the way back and I don’t know what up with it?? Thx
@@user-fy9ei8mc9r Have you got a BB jammed inside. I believe you can field strip the DPMS. This is what I would do, to check the internals.
Unfortunately here in the US, the Webley's are only offered in .177 and no mention anywhere of the 22s in the works still... I have the "Civilian" and an impressive, solid replica it is too. It also shoots pretty well, not target grade (but neither was the real one) and I have the full size service on my wish list, Good review
I have same BSA airgun which is own by my father who buy from England in 1952 or1953 Halton Royal air force training.
thanks! Found it in the meanwhile (changed name already)...not actually cheap
@@quebecpatriot1874 it is compared to most.
@@reevessairgunningreviews5572 but its almost in the price range of a FX (for me at least-Canada)
@@quebecpatriot1874 Here in the UK an FX Radar is around £150, double the price of this Chronograph.
@@reevessairgunningreviews5572 Damn, the FX here is $235 and the price of this one is $215 odd that is isnt it
care to link it, cant find it
@@quebecpatriot1874 www.aliexpress.com/item/1005006760346776.html?spm=a2g0n.detail.1000014.11.7cd8sK5TsK5TLg&gps-id=platformRecommendH5&scm=1007.18499.315613.0&scm_id=1007.18499.315613.0&scm-url=1007.18499.315613.0&pvid=0841a6e2-b834-4887-96d1-ea04e27d74a7&_t=gps-id:platformRecommendH5,scm-url:1007.18499.315613.0,pvid:0841a6e2-b834-4887-96d1-ea04e27d74a7,tpp_buckets:668%232846%238114%231999&pdp_npi=4%40dis%21GBP%2179.80%2175.81%21%21%2199.99%2194.99%21%40211b600217207627202766286e1533%2112000038214378163%21rec%21UK%21%21AB&_universallink=1&m_page_id=tkxhbwmfqcavkelo190a5735d2f17d27b0b51f6555
What is the FPS of this gun ?
Good
Hi, was wondering if you could do a follow up on the Victoptics 2-6x32? I am looking at buying one so would be very nice
Yes I can.
Suppressor name please ?
@@DeadLire in the video. Swift Stumpy
Never heard of that brand before so I Googled it on my phone but it misheard me and started talking about vaginal flatulence! Don't believe me? Try it.😳
Looks like a bag of Chinese shit.
Seems a nice little bit of kit
CO2 causes issues as its a liquid that turns into a gas. If it doesnt completely turn into a gas - then the vapour cloud can block the light/IR that the sensors are using. I dont recommend the NateChrony for CO2 for this exact reason - any muzzle mount will have an issue. Worse still - depending on temperatures & level of fill - it *may* work for a while, then stop working - infuriating for the user to work out.
Funny enough I bought the same model but the airforce one version. Set it up and it doesn’t read the pellets. Gutted now got to send it back.
I’m having similar problem too, did your display register LOSE after each shot?
Nice review Mate, pretty handy little chronograph. Keep them coming !
@@chrisdavidson9431 cheers mate. How are you?
Hello have a question about the ASG Schofield you reviewed a couple of years ago, does yours have a slight side to side and up/down play at the hinge, mine does but its only noticeable when placing the gun down and the tip of the barrel touching the table, or moving it on purpose. I don't know if this is normal and couldn't find anything online.
@@kubasu There is a very slight movement at the hinge point but not enough to be concerned about. I very much doubt the real steel revolver was manufactured to great tolerances.👍
@@reevessairgunningreviews5572 Thank you for the response!
but you dont actually say which way is decreasing power and which way is increasing power - no better than the unhelpful manual then!! 🤔
@@col.sirbuffyhorsetrouser6354 This regulator has a small window of adjustment so it really just balances the pellet with the air supply, per shot. It’s best to use a Chronograph to make small adjustments to the hammer spring if you want to decrease the power.
You know, thats a neat little piece of kit.. Like it
Can’t find it do you have a link please?
@@Airgunfunrich www.aliexpress.com/item/1005006531624871.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.1.77d3XVamXVamZ0&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=c8bd7ae4-71c2-42e4-9d2e-7f2ff7d649bd&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:c8bd7ae4-71c2-42e4-9d2e-7f2ff7d649bd,tpp_buckets:668%232846%238110%231995&isseo=y&pdp_npi=4%40dis%21GBP%2182.26%2175.33%21%21%21101.97%2193.37%21%40211b600e17203423369797746e6257%2112000037553334053%21rec%21UK%216018215220%21&utparam-url=scene%3ApcDetailTopMoreOtherSeller%7Cquery_from%3A
@@reevessairgunningreviews5572 thanks 👍
Still laughing at the brand name 😂😂😂😸🍻👍
@@nikkihayes5411 your thinking queefing, I guess?
@@Airgunfunrich me! never😸
wheres best place to get a cheap chroney
Hello, I wanted to remove the original shock absorber. I loosened the screws but I could not remove the shock absorber. It is firmly held there. Did you knock it out with a rubber stick? or something else?
Beaytiful gun
so if i want to adjust the power down i just have to turn the big screw on the back? i want to make it more backyard friendly since i only have a very small garden/can only shoot indoors and i only do plicking anyways.
@@Jijhebtmijnnaamnietnodig Yes. That’s the hammer spring adjustment. It may have a locking pin, but I managed to turn mine enough with out taking my pin out.