Welcome to the Wicked Auto Detailing channel, a channel for both professional and DIY auto detailing enthusiasts. I cover many auto detailing procedures, review auto detailing and ceramic coating products, and we have our Wicked Classic Car Episodes weekly where we perform paint correction, ceramic coating and other auto detailing service to classic cars here in Orange County California. If you are a DIY detailing enthusiast and want to learn detailing and coating maintenance for after you receive a professional ceramic coating service then this is a great channel for you! If you are a professional auto detailer looking to improve your auto detailing business and gain business growth, I cover many topics helpful to professional detailing enthusiasts as well. We also do a lot of clear bra (paint protection film) installations and we are some of the first to start using Graphene coating products that entered the Auto Detailing market. Check out all our before and after videos as well!
Пікірлер
Have you ever seen factory paint pulled off just under the wrapped edge of a hood? Happened to me recently. The top of the hood and the edge that had the factory paint/clearcoat is fine, but just beyond that under the hood a fair amount of paint came off. It does not show at all, and was an easy repair with touchup paint, but it was surprising for sure.
Lost its rights
No no no no no no
Agree with the guy above... you got a big bubble in the flattest pary of the hood. You need a better pull to start with i rekon.... you got pics of the end result on this one?
@@radio-controlledcouk there’s a video of it looking just fine after and it’s been over a year and it still looks fine. Clearly none of the commenters have used inozetek or done an Audi R8 hood 🤦🏼♂️. Like the video literally isn’t even the full install and yall KZread experts acting like we doing a shitty job 🤦🏼♂️🤦🏼♂️🤦🏼♂️
@@WickedAutoDetailingnope... not done an r8. Can you share a link to the full video... I can't find it.
@@radio-controlledcouk keep looking it’s not that far back.
I need to do this to the cowl on my 911
@@shanescarlife do it!
It looks like you didn't heed the maintenence tips after the install. Like keep your wipers clean and don't use a plastic ice scraper and dont use cleaners that contain ammonia. You know. Things like that. I have had exoshield installed because it is supposed to stop rock chips from becoming large long cracks. If its not for daily drivers, then what's it good for? Why did you have it installed in the first place? Understand, I'm not trying to be an asshole to you. I just want to know because, like I said, i had it installed and i would just like to know if i just threw away 500 dollars. It's gotta be better than the thousands of dollars I have already spent on windshield glass over the past 4 years.
Glass insurance is so cheap and yes we followed the instructions. I own the car and installed the film, it’s meant for track use.
There is not a single brand of window film that doesn’t turn to shit in a year or less.
Can I buy one for my Honda
No
I saw the whole tag
@@user-xj7se4jv5k so
gives it flair, gotta love it or hate it my man
@@xxigilz 😂
What color you wanting? red? Blue? *Nahh I want Baby poop*
DOOKIE Tan 🧐🤔
@@doelife 🥸
Tesla?
@@saisuhaskaviti1570 don’t think they gave factory black wings
@@WickedAutoDetailing ya ik but the rest kinda looks like it
@@saisuhaskaviti1570 or one of the many shitty parts companies for these cars probably painted it
Yeah had similar effect of my Nero Black Maserati, from the information I've been told, the second pass will make it look better/ clearer but it's just because the second compound is sitting ontop filling small surface imperfections and adding gloss to the compound still stuck below which is why it looks like it's been removed. When the car is exposed to a heavy rain run or a mechanical wash the top layer of polish and any sealant/ finishers on top will be removed and the haze is back. Best thing I found to work on the advice of others is after the heavy cut compound stage (one that's hard to remove) use panel wipe - kind of a degreaser. This lifted it out great for me with out adding additional polish on top but is still a bit of a pain in the ass to have to wipe down every work area to get the lacquer back to it's natural state inorder to check the work. Hope this helps 👍
I literally explain how to fix this issue in the video but thanks 🤦🏼♂️
That’s called carbon flash
👋
I don’t think I mind that. Same vibe as forged carbon
😂😂
Why tf did u use this sound
Your mom told me to
@@WickedAutoDetailing and thats why your dad left you
@@AwShuckz my dad still here thank the lord baby Jesus. but I’m guessing by your response that maybe yours isn’t? Are you projecting your insecurities on others?
@@WickedAutoDetailing does it seem like I don't have a dad? If you think so you're wrong
Hello sir, I have a new batch of polishing machines recently. Would you be interested in helping me test them?
No
I tried to compound and polish the hood on my BMW E90 LCI with jet black exterior (deep black non-metallic). Man, it sure was a bad day today 😂. I mean, I got swirl marks and the compound sticked a alot to the paint. Also, the wool pad with fine polish left too many swirls. Maybe because I used too much paste and because there were 100 degrees outside.
Based on this paragraph I suggest you do not attempt to polish your car, hire a professional.
@@WickedAutoDetailing Will do 👍
КроИлово , ведёт к попадАлову :-)
我在开会一小时多一点回来我给
That wrap was done terrible
Why?
If you peel that off, will the paint peel with it? Generally curious how adhesive wraps are.
On repaints yes or if pulled aggressively
Bald and very close to that sidewall, best have been plugging it to go to a tire shop
Duh.
That hole prob sealed itself when the nail was pulled 😂
@@13abovethenight it was definitely shooting out a lot of air lol
also what speed would you recommend
Low speed
what kind of pad did you use? heavy or polish pad? also would you recommend using fine cut from koch chemie to remove the left over polish?
I don’t use Koch chemie nor am I familiar with them. I only use shine supply and then meguiars 205 can be helpful on these types of issues.
Thats awfully close to the sidewall, Sam. I would definitely recommend a new tire
@@shanescarlife nah I like to live life on the edge of the tire
@@WickedAutoDetailing 🤣🤣🤣
@@shanescarlife they are almost bald anyway hahaha but I need them to last a bit longer. My tires are $1000 lol
Im first to comment ❤❤❤
Wow so cool
If you are coating the vehicle afterward correction. Using a primer polish works fantastic, especially since it’s recommended anyway. If your a ceramic pro guy the nano primer work. If not, essence by cat pro is amazing as well.
@@TheGeekedGizmo primer polish weakens the bond between paint and coating which leads to early failures.
I was having problems with my wax this morning after compounding and polishing my black Silverado hood. I was using the CG butter wax, and wiping it off pretty quick with a mf towel. It started sticking and I grabbed the mf pad for the da. Got most of it, but will have to wait until it cools down, metal is too hot now. Never had that happen before..
@@randysmith1630 cg butter wax is literally one of the worst products.
@@WickedAutoDetailing Thanks for letting me know. I have a can of pure carnauba, but is there anything you recommend that has a uv inhibitor in it?
Banana spec goes crazy 😵💫
@@isaiahkulakevich9058 some people like to make their bananas bigger
Not liking the stripes but the wheels look dope
@@NOLIMIT302 some people like stripes some people like wheels
Thanks for the video. Just did some testing on a old car learning how to do paint correction. The daddy-O was a great way to finish it.
No prob!
Wasting money in the west coast, it rots from the inside out
Literally have never seen one rot from the inside out
@@WickedAutoDetailing nah your work is fire bro, I was saying the west coast is rotted shi crazy over there
@@Johnburrisfromchicago1 this is true. We do suck
Wasting money in the midwest, it rots from the inside out
We aren’t in the Midwest 🤷🏻♂️
He just got his first flirty comment from a man on the IG version. Find it on @wicked_autostyling
Nice car 👍
lol no comment about the video other than the Subaru 😂
He gets paid to not work? Wow.
Better than this chick I hired once who was always doing her make up
What exactly is your definition of "work"?
If he's always working out he's doing it wrong 🤣😂
Or he just love the pump
I think he’s referring to the fact that this guy is not remotely stacked, nor does he look lean enough to be considered optimal 😂 just my guess
@@tylerzimmerman1641 and what do you look like and what kinda shape are you in?
Kettle Bell or Water Jug Overhead Squat
@@tylerzimmerman1641 I can Back Squat you and your mother
If I hear this drunk.... thing one more time I'll delete this app
Hahaha
You should see what comes off a lawn care worker.
😂😂😂
Someone needs to sign her to a big contract
Right lol
Lmao just enough for the warranty to expire 😂
😂😂
Farting
Me too
we pAAmp and wash your german cAA
This meme perfectly mirrors the souless mind of all the young phone screen addicts out there in this society of depravity. God save us.
Aren’t you one of them?
One of us. One of us. One of us.
@@PonkyKong two of us three of us four of us
As im waching this im pating my pit bull😊
Good!
Today was 93° with 81% humidity. I used some Sonax on a older Honda paint. Later noticed white ish spots.
Honda is the wirst
Lmfao l love you guys 😂😂😂
😂😂
You yourself are to blame mister
How
By the looks of things, nothing on that car was wrapped properly. You can see bubbles on thw white wrap
Do you think it’s a serious video?
She is so dope
She could hawk tuah on me