1st rate video! I have that same problem, but our kitchen cabinets were built around where the hose bib enters the house. 2 plumbers have looked at it and scratched their heads. Apparently, it cannot be replaced without tearing out some cabinetry. 😢
@WCFAsyncQueryable23 сағат бұрын
Is the reduction from 4 to 3 inches required or is 4 inch drain pipe (without reduction) ok with UPC? BTW, if so, is it better?
@codyjames8424Күн бұрын
thank you!!!
@kimchiman10002 күн бұрын
Thanks and looking forward to your follow up video on rebuilding one of these.
@jakecasper84162 күн бұрын
Can you use pipe connections without soldering?
@Nappylox713 күн бұрын
Holy cow! I think this is one of the best videos I’ve ever watched. Plane and simple and to the point. Love the graphics too. Made me a follower today!
@melanief12223 күн бұрын
Does anyone else thinks he sounds like Owen Wilson...more specifically Lightening McQueen
@richarda.valdes11976 күн бұрын
What software are you using to make this ilistration?
@mpxz9997 күн бұрын
My original spigot enters the basement JUST BELOW the plywood subfloor of the level above. This prevents me from achieving any kind of slope away from the home. In this situation, would I still a new hole, lower than the original spigots penetration, and then fill in the original penetration?
@jerrypissonme7 күн бұрын
Great explanations sir!
@mikepollock59998 күн бұрын
Thank you so much for that super-helpful instructional.
@Beanz9318 күн бұрын
I had a friend in the military tell me my old toilet wasn’t vented that’s why it didn’t work. He got orders and never fixed the toilet for me. I live in the sticks and it’s not a big enough project to get a plumber out here. The people had an addition made. So I have one good toilet. But, it sure would be nice to have the other be there for more than cleaning. Thank you.
@ol-man-duffyj68810 күн бұрын
Thank you, finally someone actually shows replacing entire assembly and not just repacking the valves. I also appreciate your in-depth explanation on how you can tell if it’s a cracked pipe versus valving issues right up front.
@victorbaquero979514 күн бұрын
Perfect this is the type of videos make me follow people do great content
@Hammerpedia12 күн бұрын
Thanks Victor!
@joel642715 күн бұрын
@0:09 it shows the toilet drain being the first in line. Shouldn't the toilet be the last fixture connecting to the street drain?
@jmaus2k16 күн бұрын
Why not use the threaded connection so if this happens again they can just thread in a new spigot? Also did you measure the level and make sure it drains out? That is a critical step and that could be why it froze up in the first place.
@creativesuit193017 күн бұрын
No pro plumber is making this mistake 😅
@machinemaker224825 күн бұрын
Does it matter what the order is? In your illustration the toilet is furthest from the septic, but suppose the septic is the other direction. Does it matter if the sink is the furthest, or do some long 90s need to change the direction after everything is connected?
@mikel952426 күн бұрын
Great video! Thank you
@ericjones336228 күн бұрын
Watching this as I'm driving back with the sanitary tee to do the job. I guess I'll turn around and take you back. Thanks for clarifying
@jamescarrillo819528 күн бұрын
Excellent explanation! Good work!
@1970Mrscott29 күн бұрын
Such good info
@jmcguire56Ай бұрын
Great video! This helped me do my first hose bib replacement.
@HammerpediaАй бұрын
Great!
@KewlQTАй бұрын
I just cannot locate the inside end of my freeze proof spigot for replacement. I know it's inside the utility area of my basement but I have no reference points and so many wires & pipes in a small location. Any tips?
@jamesedwards2687Ай бұрын
Great presentation. Thanks.
@user-xn5ge3hs5rАй бұрын
Good jobs
@michaeltammaro482Ай бұрын
Excellent and informative - Thank you. My hose bib is leaking from the spindle when I turn it on EXACTLY as to your description of a burst pipe due to not disconnecting the hose BUT there is absolutely NO water coming into my inside wall where the housing passes through THANKFULLY. Frankly, I'm baffled. It's NOT coming from the packing nut. It LOOKS like it's shooting out from the holes in the spindle that turns (OPEN/CLOSE) within the housing of the hose bib assembly.
@truth6600Ай бұрын
Congratulations, I am soon retiring too,it's a journey that challenges you everyday, good luck.
@ritoluis4903Ай бұрын
Is sdr35 permitted to rough in an outdoor restroom?
@user-hu1um2xk5hАй бұрын
Subscribed. Very good tutorial. Thanks.
@DerickTharpАй бұрын
Great details/ installation. I’m trying to teach my 17 year old.
@XC-Z-cv8qwАй бұрын
When the world needed him the most, he returned
@Roy-ij1wqАй бұрын
I purchased the course and it is excellent.
@HammerpediaАй бұрын
Thanks Roy!
@ritoluis4903Ай бұрын
When venting the sink and toliet off the same vent. Is a 1-1/2" vent sufficient?
@skydivingcomrade1648Ай бұрын
Extremely white bread stuffed in the water pipe is helpful to keep it dry and dissolves with water flow.
@CurlsOG420Ай бұрын
GREAT information once Again! thank you
@CurlsOG420Ай бұрын
Def subscribing Very informative, hope you have one on Fresh Water Lines to Sinks, Toilets And Showers/Bath Also Kitchen sink Plumbing Frssh Water Lines and Drainage/Vent Systems THANK YOU FRIEND 🇺🇸
@CurlsOG420Ай бұрын
Beautiful explanation and Video.
@CrossedCollarАй бұрын
Been doing purchasing for a few years but getting into project management now, this video was very helpful thank you!
@ZeroSeHero-ku2fxАй бұрын
Thik you
@fredsalter1915Ай бұрын
Great vid, sir! But I never could understand what is meant by "street-45" or "street-L". What does "street" mean? Thanks!!!
@Zenkai76Ай бұрын
this explains why my faucet was leaking behind my brick wall only when it's on. Thanks! have a like
@321cholАй бұрын
Hey @Hammerpedia how did you know it was a sweat connection before cutting the drywall to see it? And along that same thought, is it possible to find out if you have a screw in without being able to see the line inside the house? (i.e behind drywall)
@robertwaldvogel3619Ай бұрын
Mine isn't like that at all. Under a crawl space where I can't pull the pipe out and what I have there's no pulling the pipe out so I have cut the pipe where it is and try to install one where there's soldering.
@EdwinL-zl4ew2 ай бұрын
Thank you very much , l learn many from you . I need this
@filamfamadventures10972 ай бұрын
What would the charge for something like this? I am not looking for a formal quote just curious. I was quoted a little over $500.
@robertcornelisse86642 ай бұрын
Didnt knew about ipc or upc, so i searched Google what our state has....guess what we have neither...jersey decided to have their own code "nspc".
@user-fx5fz3pr5x2 ай бұрын
Never have i run a larger pipe into a smaller pipe, 4 inches into a 3 inch . Seems like a problem to me, should be the other way, keep it 3 or 3 to 4 . Maybe i am wrong, wouldn't be the first time.
@dammitbobby2832 ай бұрын
How To Vent & Plumb a Toilet (in 2024)?
@Texanrascal2 ай бұрын
I wish I could do videos like this. I save your videos to show Construction apprentices that get assigned to my big jobs.
Пікірлер
1st rate video! I have that same problem, but our kitchen cabinets were built around where the hose bib enters the house. 2 plumbers have looked at it and scratched their heads. Apparently, it cannot be replaced without tearing out some cabinetry. 😢
Is the reduction from 4 to 3 inches required or is 4 inch drain pipe (without reduction) ok with UPC? BTW, if so, is it better?
thank you!!!
Thanks and looking forward to your follow up video on rebuilding one of these.
Can you use pipe connections without soldering?
Holy cow! I think this is one of the best videos I’ve ever watched. Plane and simple and to the point. Love the graphics too. Made me a follower today!
Does anyone else thinks he sounds like Owen Wilson...more specifically Lightening McQueen
What software are you using to make this ilistration?
My original spigot enters the basement JUST BELOW the plywood subfloor of the level above. This prevents me from achieving any kind of slope away from the home. In this situation, would I still a new hole, lower than the original spigots penetration, and then fill in the original penetration?
Great explanations sir!
Thank you so much for that super-helpful instructional.
I had a friend in the military tell me my old toilet wasn’t vented that’s why it didn’t work. He got orders and never fixed the toilet for me. I live in the sticks and it’s not a big enough project to get a plumber out here. The people had an addition made. So I have one good toilet. But, it sure would be nice to have the other be there for more than cleaning. Thank you.
Thank you, finally someone actually shows replacing entire assembly and not just repacking the valves. I also appreciate your in-depth explanation on how you can tell if it’s a cracked pipe versus valving issues right up front.
Perfect this is the type of videos make me follow people do great content
Thanks Victor!
@0:09 it shows the toilet drain being the first in line. Shouldn't the toilet be the last fixture connecting to the street drain?
Why not use the threaded connection so if this happens again they can just thread in a new spigot? Also did you measure the level and make sure it drains out? That is a critical step and that could be why it froze up in the first place.
No pro plumber is making this mistake 😅
Does it matter what the order is? In your illustration the toilet is furthest from the septic, but suppose the septic is the other direction. Does it matter if the sink is the furthest, or do some long 90s need to change the direction after everything is connected?
Great video! Thank you
Watching this as I'm driving back with the sanitary tee to do the job. I guess I'll turn around and take you back. Thanks for clarifying
Excellent explanation! Good work!
Such good info
Great video! This helped me do my first hose bib replacement.
Great!
I just cannot locate the inside end of my freeze proof spigot for replacement. I know it's inside the utility area of my basement but I have no reference points and so many wires & pipes in a small location. Any tips?
Great presentation. Thanks.
Good jobs
Excellent and informative - Thank you. My hose bib is leaking from the spindle when I turn it on EXACTLY as to your description of a burst pipe due to not disconnecting the hose BUT there is absolutely NO water coming into my inside wall where the housing passes through THANKFULLY. Frankly, I'm baffled. It's NOT coming from the packing nut. It LOOKS like it's shooting out from the holes in the spindle that turns (OPEN/CLOSE) within the housing of the hose bib assembly.
Congratulations, I am soon retiring too,it's a journey that challenges you everyday, good luck.
Is sdr35 permitted to rough in an outdoor restroom?
Subscribed. Very good tutorial. Thanks.
Great details/ installation. I’m trying to teach my 17 year old.
When the world needed him the most, he returned
I purchased the course and it is excellent.
Thanks Roy!
When venting the sink and toliet off the same vent. Is a 1-1/2" vent sufficient?
Extremely white bread stuffed in the water pipe is helpful to keep it dry and dissolves with water flow.
GREAT information once Again! thank you
Def subscribing Very informative, hope you have one on Fresh Water Lines to Sinks, Toilets And Showers/Bath Also Kitchen sink Plumbing Frssh Water Lines and Drainage/Vent Systems THANK YOU FRIEND 🇺🇸
Beautiful explanation and Video.
Been doing purchasing for a few years but getting into project management now, this video was very helpful thank you!
Thik you
Great vid, sir! But I never could understand what is meant by "street-45" or "street-L". What does "street" mean? Thanks!!!
this explains why my faucet was leaking behind my brick wall only when it's on. Thanks! have a like
Hey @Hammerpedia how did you know it was a sweat connection before cutting the drywall to see it? And along that same thought, is it possible to find out if you have a screw in without being able to see the line inside the house? (i.e behind drywall)
Mine isn't like that at all. Under a crawl space where I can't pull the pipe out and what I have there's no pulling the pipe out so I have cut the pipe where it is and try to install one where there's soldering.
Thank you very much , l learn many from you . I need this
What would the charge for something like this? I am not looking for a formal quote just curious. I was quoted a little over $500.
Didnt knew about ipc or upc, so i searched Google what our state has....guess what we have neither...jersey decided to have their own code "nspc".
Never have i run a larger pipe into a smaller pipe, 4 inches into a 3 inch . Seems like a problem to me, should be the other way, keep it 3 or 3 to 4 . Maybe i am wrong, wouldn't be the first time.
How To Vent & Plumb a Toilet (in 2024)?
I wish I could do videos like this. I save your videos to show Construction apprentices that get assigned to my big jobs.