No it just allows the fog lights to stay on when the high beams are enabled
@user-mr5rg1dg4i3 ай бұрын
@FlyinDiesel if you manually turn your fog lights on the auto high beams don't work. (2022 gmc at4 3500)
@aslife38134 ай бұрын
Isn’t the bds logo supposed to be on the outside of the radius arms?
@kalebhutchins67993 ай бұрын
Yes
@thomasdermates2165 ай бұрын
Any luck yet?
@FlyinDiesel5 ай бұрын
Not as of now. We ran into a production issue with it. We will let you know when it is available.
@FATDADDYSACK5 ай бұрын
Every john deere has them, who knew my tractor is military equipped
@Engine-town5 ай бұрын
Clean air is always good. It sounds like it’s struggling to breathe though no?
@FlyinDiesel5 ай бұрын
The sound you are hearing is the vortex fans on the S&B military style intake.
@unknown_truckers7 ай бұрын
Should have gone with Carli Way better radius arms, way softer ride and performing coils. And best if all no blocks
@FlyinDiesel7 ай бұрын
While we do agree to some extent, the budget can effect this majorly. Also Carli's rear springs tend to be to soft for towing decently heavy loads. Thanks for watching though!
@Patrick-co1qm3 ай бұрын
Sooo, why are Carli lifts so good then???
@unknown_truckers3 ай бұрын
@Patrick-co1qm they're more than lifts, they are suspension systems. And they don't just add blocks to raise the body, they're built more to absorb the road. Just look up a few videos of what they're capable of
@unknown_truckers3 ай бұрын
@FlyinDiesel also when you get a system installed you don't need to swap out the leafs if towing heavy is a big thing, you'd have airbags anyway for safety and ride leveling.
@Post_Oak_8 ай бұрын
I don’t see them offered for Powerstroke on their website anymore
@FlyinDiesel8 ай бұрын
They only offer them for the 17-19 6.7 powerstrokes.
@Post_Oak_8 ай бұрын
@@FlyinDiesel yeah I was looking on their website because that’s what I have and the page isn’t findable on their website. I found it through a google search but when you click add to cart, it has a 404 error
@fernandotavera40928 ай бұрын
How much does that package cost ? An how much to install?
@Post_Oak_11 ай бұрын
That is sick
@Dcj0111 ай бұрын
Wtf
@deecee84911 ай бұрын
How does 4inch drive so I lose a lot of Cornering? How’s quality of ride?
@mguerramd Жыл бұрын
I’m your pyrotechnician for the fireworks show. Do you have access to more video? Thanks!
Is it 4 inches higher in front? Looks like something is very wrong.
@FlyinDiesel Жыл бұрын
It is 4.5” lifted both front and rear. It’s perfectly level. May just be a weird camera angle your seeing
@user-gq5rn8bq7z9 ай бұрын
@@FlyinDieselI have a ford f250 diesel 4x4 where can I find this kit so i can buy it
@FlyinDiesel9 ай бұрын
@@user-gq5rn8bq7z You can get it directly from the BDS website
@samsonhendrixiii3308 Жыл бұрын
Wish it would rain here!)))
@mariormz4582 Жыл бұрын
Looks great, what part number did you use? I have seen 2 different part numbers for this lift.
@hungryhungryhummer Жыл бұрын
I don’t care what anyone says. If you are going to buy front end parts you shouldn’t buy anything but kryptonite. Lifetime warranty and parts you’ll never have to replace again. It doesn’t make sense to spend the money on anything else.
@bamafencer129 ай бұрын
Fax, had them on my Hummer. Best ride and no issues.
@durawins5 ай бұрын
I wore them out
@rydermaxwell77802 ай бұрын
Yeah especially if you're paying for labor anyways. The gm tie rods are embarrassingly small
@henrybabin803129 күн бұрын
You’ve beefed up the tie rod. But that rack and pinion is still about at cheap looking as the factory tie rod. So where is that energy going to go now? Instead of bending a tie rod next time you’re going to break something else.
@colejohnson876226 күн бұрын
@@henrybabin8031not a rack and pinion shown in this video
@d2lldhnl Жыл бұрын
This is so inaccurate, so far from reality. I miss the yelling at bolts that wont come loose or the broken bolts. /s
@mattgarkus2489 Жыл бұрын
Nice video 👌
@StarsAutoSport Жыл бұрын
Great content, cheers.
@FlyinDiesel Жыл бұрын
Glad you enjoyed it. Thanks for watching!
@glamglamglamglamglam Жыл бұрын
This is great content man I hope this video gains some traction. Adding time stamps with the names of the parts you’re removing could add an educational aspect as well.
@r.6617 Жыл бұрын
How do you learn all this? Like where do you even start. This is something I’d love to do
@eyecup1638 Жыл бұрын
Work as a lube tech, or go to a trades/community college. Most importantly is hands on learning and wanting to learn
@kb016638 ай бұрын
Go to a dealership as a lube tech and move yourself up. Don't go to a big school like UTI those kids don't know sh1t usually, Community College is good option and it's cheap.
@canadianv1ncecuh_again_ Жыл бұрын
Why spend $200 to fill up ur fuel tank when u can spend $2000
@sarahgonneville1776 Жыл бұрын
😩 *Promo sm*
@xamideex8937 Жыл бұрын
That doesn’t seem right. If the wheels are off the ground and in park, which it should be, then there should be no tension. When you put a vehicle in park it doesn’t just stay right there, it usually moves a little until it locks in park. But like most things on the internet, if you say it’s true…..it must be…..Right?
@FlyinDiesel Жыл бұрын
Yes if the truck is off the ground and there’s no weight of the vehicle on the tires but in this case this truck is on a drive on lift so there’s weight on the tires that causes tension.
@anthonythomas8961 Жыл бұрын
had that happen once, scared the shit out of me, good tip
@FlyinDiesel Жыл бұрын
Haha yeah definitely a little sketchy when you don’t expect it! Thanks for watching!
@camerontempleton8898 Жыл бұрын
How many hours did you have into this?
@FlyinDiesel Жыл бұрын
This was about a 30-hour job.
@Zentanglez7 Жыл бұрын
Love y’all’s content! I am from west Texas needing injectors and studs done on my lb7 duramax! Plan to get in touch witch you guys !
@FlyinDiesel Жыл бұрын
Thanks Brotha! We would love to work on your truck! Check out our Instagram you can contact us there
@Maybe_XenOn Жыл бұрын
Wear something on your eyes man could've poked your shit in😂
@Maybe_XenOn Жыл бұрын
(Yes I know it hit his mouth area, just a eye protection suggestion)
@mbdiesel Жыл бұрын
What model engine is that and did you lengthen the injector harness wires?
Пікірлер
How is the fuel mileage with the lift?
Does this effect the auto high beams at all?
No it just allows the fog lights to stay on when the high beams are enabled
@FlyinDiesel if you manually turn your fog lights on the auto high beams don't work. (2022 gmc at4 3500)
Isn’t the bds logo supposed to be on the outside of the radius arms?
Yes
Any luck yet?
Not as of now. We ran into a production issue with it. We will let you know when it is available.
Every john deere has them, who knew my tractor is military equipped
Clean air is always good. It sounds like it’s struggling to breathe though no?
The sound you are hearing is the vortex fans on the S&B military style intake.
Should have gone with Carli Way better radius arms, way softer ride and performing coils. And best if all no blocks
While we do agree to some extent, the budget can effect this majorly. Also Carli's rear springs tend to be to soft for towing decently heavy loads. Thanks for watching though!
Sooo, why are Carli lifts so good then???
@Patrick-co1qm they're more than lifts, they are suspension systems. And they don't just add blocks to raise the body, they're built more to absorb the road. Just look up a few videos of what they're capable of
@FlyinDiesel also when you get a system installed you don't need to swap out the leafs if towing heavy is a big thing, you'd have airbags anyway for safety and ride leveling.
I don’t see them offered for Powerstroke on their website anymore
They only offer them for the 17-19 6.7 powerstrokes.
@@FlyinDiesel yeah I was looking on their website because that’s what I have and the page isn’t findable on their website. I found it through a google search but when you click add to cart, it has a 404 error
How much does that package cost ? An how much to install?
That is sick
Wtf
How does 4inch drive so I lose a lot of Cornering? How’s quality of ride?
I’m your pyrotechnician for the fireworks show. Do you have access to more video? Thanks!
flyindiesel.com/i-4382-allison-flexible-locking-transmisson-dipstick-pre-sale.html?ref=category%3A101&fbclid=PAAaZEKmlCR9T9_pO3DPbcbRide0TZ8L9yNtAA0RaCjjjuGq-qoNuIoPOr1Mw
How much is that particular set up.. beautiful
Is it 4 inches higher in front? Looks like something is very wrong.
It is 4.5” lifted both front and rear. It’s perfectly level. May just be a weird camera angle your seeing
@@FlyinDieselI have a ford f250 diesel 4x4 where can I find this kit so i can buy it
@@user-gq5rn8bq7z You can get it directly from the BDS website
Wish it would rain here!)))
Looks great, what part number did you use? I have seen 2 different part numbers for this lift.
I don’t care what anyone says. If you are going to buy front end parts you shouldn’t buy anything but kryptonite. Lifetime warranty and parts you’ll never have to replace again. It doesn’t make sense to spend the money on anything else.
Fax, had them on my Hummer. Best ride and no issues.
I wore them out
Yeah especially if you're paying for labor anyways. The gm tie rods are embarrassingly small
You’ve beefed up the tie rod. But that rack and pinion is still about at cheap looking as the factory tie rod. So where is that energy going to go now? Instead of bending a tie rod next time you’re going to break something else.
@@henrybabin8031not a rack and pinion shown in this video
This is so inaccurate, so far from reality. I miss the yelling at bolts that wont come loose or the broken bolts. /s
Nice video 👌
Great content, cheers.
Glad you enjoyed it. Thanks for watching!
This is great content man I hope this video gains some traction. Adding time stamps with the names of the parts you’re removing could add an educational aspect as well.
How do you learn all this? Like where do you even start. This is something I’d love to do
Work as a lube tech, or go to a trades/community college. Most importantly is hands on learning and wanting to learn
Go to a dealership as a lube tech and move yourself up. Don't go to a big school like UTI those kids don't know sh1t usually, Community College is good option and it's cheap.
Why spend $200 to fill up ur fuel tank when u can spend $2000
😩 *Promo sm*
That doesn’t seem right. If the wheels are off the ground and in park, which it should be, then there should be no tension. When you put a vehicle in park it doesn’t just stay right there, it usually moves a little until it locks in park. But like most things on the internet, if you say it’s true…..it must be…..Right?
Yes if the truck is off the ground and there’s no weight of the vehicle on the tires but in this case this truck is on a drive on lift so there’s weight on the tires that causes tension.
had that happen once, scared the shit out of me, good tip
Haha yeah definitely a little sketchy when you don’t expect it! Thanks for watching!
How many hours did you have into this?
This was about a 30-hour job.
Love y’all’s content! I am from west Texas needing injectors and studs done on my lb7 duramax! Plan to get in touch witch you guys !
Thanks Brotha! We would love to work on your truck! Check out our Instagram you can contact us there
Wear something on your eyes man could've poked your shit in😂
(Yes I know it hit his mouth area, just a eye protection suggestion)
What model engine is that and did you lengthen the injector harness wires?
Legit!! Put me on the pre order list bruh 😎👍
Yesssirrr 💪💪