Пікірлер

• 
  @zealot432519 күн бұрын

  Thank you a lot! Great tutorial

• 
  @garengpong47520 күн бұрын

  why can't I access the setup, it says it has exceeded the usage limit

• 
  @hemanthlucky956821 күн бұрын

  sir how can we find forces at different angle of attacks. please reply 🙏

• 
  @faisalh2Ай бұрын

  hi, i want to simulate RTM process on fluent, which involves porous media as well as resin injection, can you guide on it. Regards

• 
  @luisvargas7569Ай бұрын

  Sir, you are Zeus CFD please can you do a CFD heat exchanger with baffles? We would like to learn more Thanks a lot PD: a CFD multipass coming soon Thanks you Zeus CFD

• 
  @prathameshsahoo3172Ай бұрын

  How to apply dynamic meshing using udf to similar simulations I have to simulate an oscillating 3d wing Can you help please?

• 
  @Jazin-iv7tnАй бұрын

  hiiiiiii Actually im using students licence version of ansys im facing an issue when i try to do setup it says student licence have no access further for like more than 10...........9 cells Its keep saying that idk what to do kindly help me

• 
  @candebeygeldi5098Ай бұрын

  Is it shell and tube or double pipe heat exchanger?

• 
  @calvinwong8115Ай бұрын

  Really helpful in helping me set up aerodynamic simulation for my assignment, thank you very much!

• 
  @yusufaziz5348Ай бұрын

  mantap bro

• 
  @wym1753Ай бұрын

  @@yusufaziz5348 noted with thanks

• 
  @muhammedkhan6238Ай бұрын

  Thanks man so much helpful thank you so much for making this it help me a lot

• 
  @handyman0102 ай бұрын

  Any tutorials for this please?

• 
  @lucky-fl8pt2 ай бұрын

  This is a wing or aerofoil. Pelase clear my doubt.

• 
  @Full_Fun_ASMR2 ай бұрын

  can you please share cad model

• 
  @lydiapennoh34102 ай бұрын

  this has been helpful to me, thank you.

• 
  @NguyenPhong-xf5xb2 ай бұрын

  Hey! Thank you for the detailed tutorial! May i ask which type of Honda is the one using in here?

• 
  @kinderlandspo30592 ай бұрын

  I have a question. IS it right that you didn't select pipe's material? If it is right, could you tell me the reason why you didn't choice pipe's material?

• 
  @brad1brad287Ай бұрын

  Pardon me. I want to park here

• 
  @user-li6ny7gj7x2 ай бұрын

  Very good job, it is a great support, could you please share the geometry with me to show it at the university. Thank you very much

• 
  @manikandanr73892 ай бұрын

  Nice video friend. Can you give explain videos of cfd journals for research purpose..?

• 
  @user-yn5tx2sh7f2 ай бұрын

  thank you

• 
  @dhairyarajdev80552 ай бұрын

  i'm getting error of overlapping please help me to solve this

• 
  @DanhPham-or7pi2 ай бұрын

  Sir what's brand name of model ?

• 
  @saeidehhadavand76562 ай бұрын

  i tried to follow the instruction but i faced this error ...(Cannot find patchField entry for walls) i dont know what is the problem but error points to P file

• 
  @shahzamankhan96112 ай бұрын

  Sir i have mailed you for the cad model ,if you can respond to it ,i will be thankful to you

• 
  @manojkumark47583 ай бұрын

  Thank bro it helped me a lot for my project

• 
  @harshitrathore23453 ай бұрын

  Steady state heat transfer analysis Condenser using ANSYS workbench

• 
  @tsegeyearegawi9413 ай бұрын

  how can i take the crosswind to study stability? where i write the crosswind value as an input

• 
  @huythan45553 ай бұрын

  hi.Can you let me know how to import 3D airfoil from airfoil tool? i wanna analysis 3D airfoil not 2D .

• 
  @isohnonso89263 ай бұрын

  I'm experiencing a floating point exception in my numerical solution, what could be the problem?

• 
  @brownnugget4013 ай бұрын

  trying to analyze f1 car but it is showing too many cells when it gets imported to fluent, i have student license so what can i do to reduce the cell count

• 
  @ramnaikbanothu81522 ай бұрын

  Bro try to decrease the element size in the mesh. But you are saying that you are trying to analyse an F1 car. In that case the mesh should be fine so install a cracked version 😊

• 
  @MrSarrdar3 ай бұрын

  im stuck again, when i do "Is" i get nothing, it says "command 'is' is not found, but can be installed with: sudo apt install ironseed"

• 
  @megacup39773 ай бұрын

  on the solution part it dont be going down the arrows and i dont know why i have preeated everything thrice

• 
  @vitaliyfinonchenko3 ай бұрын

  Thank you, CFD BABA! Based on your example I have made a simulation with a nozzle and this is fantastically!!!

• 
  @bijoynaskar39613 ай бұрын

  Thank you Sir for provide this type of videos. please shear more different type of fluent related video in your channel.

• 
  @AdityaSharma-jx5rq3 ай бұрын

  how do we calculate heat rejected??

• 
  @AdityaSharma-jx5rq3 ай бұрын

  and how can we use 50%water+50% ethylene glycol

• 
  @AdityaSharma-jx5rq3 ай бұрын

  are we using a mixture of air and water in the fluid??

• 
  @khalilbenjebara54093 ай бұрын

  Could you please provide us with the design geometry

• 
  @Iam_Bn4 ай бұрын

  Hello thank you so much. I got a problem (thin/surface) in tube part and the system said (wall operation failed (geometry engine .while generating thin..) 2-operation failed for all face sets (thin/surface…) I need your guidance

• 
  @nacheems80474 ай бұрын

  when I go to the localstate folder, I don't have the rootfs folder. Instead I find a hard disk image file.

• 
  @engineeringlecturesandexpe30914 ай бұрын

  install all software Thank you so much, Sir Love from Pakistan

• 
  @engineeringlecturesandexpe30914 ай бұрын

  You are the Real Gem Sir! Thank you So much for helping Us. ( love From Pakistan)

• 
  @m.t.h.nchannel75654 ай бұрын

  How to run paraview in this case

• 
  @tasospenlidhs53904 ай бұрын

  Hello can i send you an email about a question i have ?

• 
  @xvlls2794 ай бұрын

  Hi sir, If possible can you do an ansys tutorial of a 3D tank getting mixed with hot and cold water from both sides, along with volume rendering animation.

• 
  @yunusemreozturk46395 ай бұрын

  Could you shate the geometry?

• 
  @vishnubalasubramanian45145 ай бұрын

  I want to learn more about CFD and CFX

• 
  @vishnubalasubramanian45145 ай бұрын

  Sir please do more videos on Ansys Fluent CFX and CFD tutorial for total begginers

• 
  @anni_tonic5 ай бұрын

  Thank you for the great video! I have a question: Is the gravity already included in the velocity magnitude? I have trouble to decide the value I need for a leckage/opening in a tank

• 
  @usmanmunir3675 ай бұрын

  Thanks for guiding. I found an error after editing the bashrc file. Then I added "source" word before the line. So, I paste this "source /usr/lib/openfoam/openfoam2312/etc/bashrc" and It worked.

• 
  @fulcrum29684 ай бұрын

  brrooooo thanks this helps a lot

• 
  @fulcrum29684 ай бұрын

  brrooooo thanks this helps a lot