Пікірлер

• 
  @Sleepnebula15 күн бұрын

  It’s only 11 gallons. Kinda misleading since it has 15 in the name

• 
  @CharlesHaskett-nt2sp29 күн бұрын

  I'd like to see more updates on this tank! Looking good. More posts please!!

• 
  @russellkeith3193Ай бұрын

  am going to make a large one 30 l × 12× 12 thx you

• 
  @jrplayer165Ай бұрын

  I have a question after you put a media basket in the first row do you need another filtration in row 2 or no u can keep it empty and put like a heater in that row?

• 
  @JCSReefingАй бұрын

  I just put a heater.

• 
  @daddykiller5835Ай бұрын

  Very beautiful setup 👌

• 
  @Unmployable2 ай бұрын

  Do you have the STL file for that box you made? I have a printer I’d love to make this!!!!!!! Please let me know!!

• 
  @azoriana923 ай бұрын

  I followed all your steps but I can not longer connect to my fusion and I cannot get the blue light to come on. Has anyone had this issue?

• 
  @queencityreefs3 ай бұрын

  👌🔥💯🙌

• 
  @thereefinglife54943 ай бұрын

  Are you able to access the back side to clean the glass since it's against the wall? I was thinking of doing something similar but was worried I couldn't get to the back to clean. Nice setup!

• 
  @jamesbroderick36603 ай бұрын

  Another great update. Thank you.

• 
  @cre863Designs3 ай бұрын

  Awesome update bro!! Proud of ya!!

• 
  @JCSReefing3 ай бұрын

  Appreciate it!

• 
  @jamesbroderick36604 ай бұрын

  So idk if this going to make sense, on that lid you have. Where did you get that plastic black strip. That’s going along the side of the lid? I can’t find anything like that

• 
  @JCSReefing4 ай бұрын

  To hold the glass? I 3D printed them

• 
  @jamesbroderick36604 ай бұрын

  @@JCSReefing yes to told the glass. Do you sell them? I would like some. I have the same size tank

• 
  @jamesbroderick36604 ай бұрын

  @@JCSReefing could you 3D print a few more?

• 
  @JCSReefing4 ай бұрын

  @@jamesbroderick3660 shoot me an email, [email protected]

• 
  @jamesbroderick36604 ай бұрын

  @@JCSReefing sending it now

• 
  @romieromester5 ай бұрын

  What flow do you have the return pump at? I constantly worry if it’s too much or not enough for my tank

• 
  @JCSReefing5 ай бұрын

  on the return pump it is up as full power/flow. I use a sicce pump for flow.

• 
  @alexsantana40495 ай бұрын

  Thanks

• 
  @tanutpatt3656 ай бұрын

  what app do you use to connect to orphek os3 ?

• 
  @JCSReefing6 ай бұрын

  Ophek Icon app. But you need the controller osix . The lights alone I do not think have that capability without the controller

• 
  @tanutpatt3656 ай бұрын

  thank you@@JCSReefing

• 
  @letsgobrandon9876 ай бұрын

  Nice tank but I didn’t know that I’d go through all that just to increase from a 150 to a 200 to be honest. Good luck though and happy reefing.

• 
  @arashvarzandeh48607 ай бұрын

  Hey brother! I was thinking of using the same ato container for my kalk, minus the stirring that you did. My question to you, the small open area where the hose of the ato pump comes out from next to the rodi connector, does that fully close at all? Thanks!

• 
  @algamingunboxing73547 ай бұрын

  After a power outage in my Garage today , my energy bar832 apparently is not working all lights are on but no current on outlets. Thank you for this video you save me a lot of money.

• 
  @us2tohell7 ай бұрын

  Hey, would like an update of how things are with this tank, new video please.

• 
  @JCSReefing7 ай бұрын

  I will try to do one here shortly. It has been busy with holidays but will do! :-)

• 
  @thomasurban51247 ай бұрын

  Don't buy bashsea they are junk. Very poorly constructed. They don't have warrantys. i bought one of their skimmers and it was defective and damaged. I got stuck with it and am out 800 dollars. the owner is a real jerk too. just a very bad company. stay away dont buy bashsea

• 
  @JCSReefing7 ай бұрын

  Can't speak much of there skimmer or other products as I have never tried any but the sumps and ATO containers. I have had multiple sumps and this by far for my setup and quality of acrylic and seams seem good to me. Sorry, to hear about the skimmer of course. Having my multiple sumps from them over the years and never had an issue. (knock on wood) thanks for the feedback either way.

• 
  @xmonkee8 ай бұрын

  Awesome video! I’m planning on doing the same thing on my 48in tank. How did you attach the orphek mount to the radion RMS track? Is it just resting on top of it? And does the rms look secure in supporting the orphek bars’ weight? Thanks in advance!

• 
  @JCSReefing8 ай бұрын

  I have two t-nuts going into the top of the light rail RMS. yes, it supports the weight.

• 
  @ultramaximusreviews8 ай бұрын

  That is a nice starter tank. No sand? I love how you are working on that tank with your daughter

• 
  @ultramaximusreviews8 ай бұрын

  Never thought of adding some mangroves

• 
  @tedmontague8 ай бұрын

  How well can you see the extra pop during peak whiter light times on the radions? My biggest issue with my Radion xr15 g5 pros is during the whiter parts of my schedule the color pop really suffers. Been considering some strips like this to get more pop during those times.

• 
  @grimcarnage43098 ай бұрын

  It doesn't look like you used their sump. Any particular reason?

• 
  @JCSReefing8 ай бұрын

  Correct, I did not. I went with Bashsea sump simply because I liked the layout and I have used there sumps before and really enjoy the quality and color options.

• 
  @queencityreefs8 ай бұрын

  Great episode! Cool lights for sure 👌💯✌️🔥

• 
  @CJSAQUARIUMS8 ай бұрын

  Perfect application for those lights! I had all the bars but I think combo wit radions makes the color blending dope 💯

• 
  @JCSReefing8 ай бұрын

  Digging it so far for sure! 🤙

• 
  @Reefkpr18 ай бұрын

  Turned out great! I've never used Orphek's but they sure do add some POP to your tank. Thanks for sharing.

• 
  @lindawilliams72648 ай бұрын

  How many fish can you get in there

• 
  @JCSReefing8 ай бұрын

  All depends on fish. If they are “clown fish” sized I would say 6 or so. So for example, two clowns, Blenny, two cardinals, golby or so on

• 
  @moereefer8 ай бұрын

  I really love those lights especially the UV, Violets ect.. it multiple LEDs in one. Not like the copy Chinese type with one led instead. Great choice

• 
  @JCSReefing8 ай бұрын

  Agree!! 👍

• 
  @JCSReefing8 ай бұрын

  Appreciate it

• 
  @randomreefer8 ай бұрын

  I literally just bought these. I can’t find the controller anywhere though

• 
  @JCSReefing8 ай бұрын

  I would maybe try contacting Orphek.

• 
  @franksuarez95978 ай бұрын

  You buy the remote separate

• 
  @fletcherwright70428 ай бұрын

  Looking good 👍

• 
  @JCSReefing8 ай бұрын

  thank you

• 
  @jbonez___9 ай бұрын

  What is the light you are using?

• 
  @JCSReefing9 ай бұрын

  www.amazon.com/gp/product/B085CDPSMR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

• 
  @jonniefast9 ай бұрын

  no lid? 🥺

• 
  @JCSReefing5 ай бұрын

  i made a glass lid that sits on some 3d printed clips I made

• 
  @arielbalangue648910 ай бұрын

  Dude It's amazing

• 
  @winstonclyde10 ай бұрын

  That's badass man! Great DIY

• 
  @Nick-co9pf10 ай бұрын

  Needs to be an opensource kit to wire things like this to an apex system or other automation/app/condition triggered system

• 
  @JCSReefing10 ай бұрын

  It is just a 12c DC pump that will be plugged into EB8 and all it will do is trigger on/0ff. Not speed or rotation. Happy Reefing!

• 
  @6jdhd10 ай бұрын

  You don't need to stir kalkwasser. If your buying the not pure kalkwasser then yes. But pure kalk releases in the water quality. For example if you bottle of kalk says 99.9 % that's pure. The other kalks are not pure and leach metals into your water like BRS kalkwasser.

• 
  @JCSReefing10 ай бұрын

  www.saltwateraquarium.com/reef-blueprint-isol8-ca-oh-2-kalkwasser-2-5-kg-captiv8-aquaculture/ Is what I use- I agree kalk does not, but dosing “slurry” is what I am thinking. It is an experiment so we shall see. Appreciate it! 👍🐠 if anything and go to just regular, I can add kalk and use this to mix it and then just let it settle like normal. Lol

• 
  @vargagergely1523 ай бұрын

  Ofc you need , otherwise wouldnt be kalkstirrer sold by big names ... actually you have to mix it up always a bit ( and im talking about the pure calcium hydroxide)

• 
  @queencityreefs10 ай бұрын

  Very cool Great work Looking forward to a long term use update 👌🏻💯✌🏻

• 
  @JCSReefing10 ай бұрын

  We will see. It’s more of an experimental thing. Lol. 🐠👍

• 
  @4foxsake57110 ай бұрын

  Have to admit, though I love my IM 200g ext peninsula. I was disappointed that the returns aren’t a true 3/4”. The inlet to the bulkhead is 3/4”, but it reduces through the glass and into the tank. Boo.

• 
  @JCSReefing10 ай бұрын

  Thanks for sharing. Didn’t really notice that as it went into the lock line inside the tank. That being said, even with a slight reduction I would think you still can get plenty of GPH turn over. 🐠🤙

• 
  @4foxsake57110 ай бұрын

  @@JCSReefing unfortunately, when I use my Apex to monitor the flow with, and without that, it did make quite a difference.

• 
  @JCSReefing10 ай бұрын

  @@4foxsake571 if you mean loc line? Then yes, that absolutely restricts the flow. All depends on what kind of GPH turnover you are trying to achieve. Happy reefing!

• 
  @4foxsake57110 ай бұрын

  @@JCSReefing the concern I have with this type of settup is when calculating the back pressure in reference to hydrodynamic flow, the same amount of flow will cause much more demand on the pump, and cause premature pump failure. I would have definitely made a different choice of return pumps. That is the primary concern with 3/4” piping that restricts to 1/2” prior to its outlet. The only real benefit from having the 3/4” piping in this type of instance is less friction coefficient, which reduces radiant heat. Any restriction in inner diameter, will cause the same amount of back pressure at minimum, and maybe even more because it will cause the flow to become turbulent. It’s not going to stop me from using my tank, but it is a bummer, when you thought you had a real 3/4” inlet. Specially when I purchased my own 3/4” lock line attachments because I had my own design. Just something I wish they let people know about. All in all it will work fine, I am just a stickler for detail, and each detail coincides with an important decision about settup.

• 
  @4foxsake57110 ай бұрын

  @@JCSReefing yes the loc line, but the actual bulkhead is a reducer. The back of the bull head is 3/4”, but as soon as it comes through the glass is reduces to 1/2” in the bulkhead. I removed the factory bulkhead, and was going to add my own 3/4” bulkhead, but in no way would it fit. Not even close. That’s when I realized something was not as advertised.

• 
  @JWJJR11 ай бұрын

  Thank you for the build videos. I currently have a 200 EXT still crated in the garage, but the stand is built. I did have a couple questions for you. First off, with the plumbing did you have any concerns with its weight hanging on the return bulkheads or overflow? Or is this pretty solid since its connected to a bulkhead in the sump? I was contemplating using 80/20 to support some of the plumbing, but maybe I'm over thinking things. That brings me to my second question, what size t-nutz are you using? Even if I don't use 80/20 for the plumbing, I'd still like to use it for mounting lights, control board, etc within the stand. Thanks again and look forward to your next video.

• 
  @JCSReefing11 ай бұрын

  I appreciate the support. As far as the plumbing, I did 3d print some brackets that support the plumbing a bit to the wall. That being said, Once it is plumbed, (depending on how you plumb it) it is supported pretty well without. I would be happy to send you some additional pictures if you need. Now for the T-nuts, I contacted IM and there aluminum stands are there own type of extruded aluminum size. That being said, they did say T-3-T5 nuts can work so for myself, I purchased a mixed pack off amazon----www.amazon.com/gp/product/B098RLZM73/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Let me know if you have any other questions-- 🙂

• 
  @JWJJR9 ай бұрын

  @@JCSReefing Do you have a link to the Amazon T-nuts that you purchased?

• 
  @JCSReefing9 ай бұрын

  @@JWJJR QCQIANG 600pcs M3 M4 M5 Thread Sliding T-Nuts Assortment Kit, Hammer Nut with Hex Button Head Screws for Profile Groove a.co/d/bQbrKag

• 
  @BeingMarcKnox11 ай бұрын

  Most impressive. Thanks for sharing. Glad I sww this - I was about to buy red plumbing. Also regarding the sump - Any reason you went with the 48" vs the 60" Bashea sump? I'm considering the 60" but I not sure how important the bigger the size. Your thoughts?

• 
  @JCSReefing11 ай бұрын

  I went with the 48" sump due to preference. I wanted some space to add matching 10g ATO, a 10G kalkwasser (you will see in future vid) as well as space for a control cabinet (you will see in future vid) can't go wrong with any of the #bashsea @bashsea products!

• 
  @kennethallen345211 ай бұрын

  Definitely don’t like the Shimmy 😅

• 
  @JCSReefing11 ай бұрын

  Shimmy no more. lol. "Knock on wood"

• 
  @kennethallen345211 ай бұрын

  Definitely like the tank if you went with any other tank what would you do? @@JCSReefing

• 
  @JCSReefing11 ай бұрын

  @@kennethallen3452 Hmm, thats tough as I am always been a fan of external overflows so possibly a custom WB. OR, Fiji cube 171 gallon to keep costing down a bit but never had either of the tanks. That being said, I really love the 30" front to back depth so far.

• 
  @fishybizzness15924 ай бұрын

  Nice build! How did you level the tank? Did you use shims?

• 
  @mylastright11 ай бұрын

  Where did you get the lid from?

• 
  @JCSReefing11 ай бұрын

  Got glass sheet from Home Depot. Scored it with a glass cutter and made it to size. Then 3D printed clips that it sits on inside the tank rim. 😜🤙

• 
  @mylastright11 ай бұрын

  @@JCSReefing thanks dude, it gets old having to top off small tanks

• 
  @JCSReefing11 ай бұрын

  @@mylastright yes it does

• 
  @tritonpower364111 ай бұрын

  coming along well. I am loving mine. looking forward to see corals and fish in yours.

• 
  @queencityreefs11 ай бұрын

  Very cool 👌🏻✌🏻

• 
  @don_chuwish11 ай бұрын

  Any update after install? How did you plumb the drains? Do you like the filter sock setup?

• 
  @JCSReefing11 ай бұрын

  Check the most recent video I posted. Shows the drain setup! ABSOLUTELY a fantastic sump and company! (And no, not sponsored). Just great, great quality and support

• 
  @tomfasano908211 ай бұрын

  How is it working out like that? I heard the roots are crazy strong and can break the glass

• 
  @JCSReefing11 ай бұрын

  So far so good. Not sure on breaking the glass but also not saying it couldn't happen. If you look at "inappropriate reefer" he has MUCH larger ones in a small tank as well. Happy reefing! 🙂

• 
  @Koraidon-gv5ib11 ай бұрын

  Have you noticed much difference in Phosphates or Nitrates? @@JCSReefing

• 
  @reefingwithreggie841311 ай бұрын

  Looks really nice

• 
  @JCSReefing11 ай бұрын

  Appreciate it! One step at a time. 👍

• 
  @tedblack216311 ай бұрын

  Looks nice.

• 
  @JCSReefing11 ай бұрын

  Appreciate it! 🤙