Пікірлер

• 
  @michaeljenkins4895Ай бұрын

  We had the same year 2500 chevy diesel .We put 558000 miles in 4years with very little repair.

• 
  @REIMAGINEDRESTOMODSАй бұрын

  What size are those rims? THX!

• 
  @daryncalton8765Ай бұрын

  18s from a 2010 Camaro V6

• 
  @REIMAGINEDRESTOMODSАй бұрын

  Did you ever do any performance mods?

• 
  @mr.unknowncali-life93502 ай бұрын

  Cool dad ! My sons also learn on a electric atv and power wheels . He been driving a 2021 raptor 90 . But want to sale it to buy the new 2024 raptor 110 efi for the best starting and fast start up instead of carb a big headache. My question how’s the efi on this machine and how does your daughter like it sir ?

• 
  @daryncalton8765Ай бұрын

  The EFI has been great so far. I was amazed at even if only a couple of extra seconds, how much faster and smoother this machine is to start with a cold engine compared to her friends little Raptor. The power is nice and smooth. She has loved it so far. I need to get something so her and I can ride together

• 
  @mr.unknowncali-life9350Ай бұрын

  @@daryncalton8765 yes sir , and you should buy a raptor 700 costly but man are they fun . Am in California so am limited with what I can buy , it sucks but I love those efi over carbs

• 
  @newme-tp4ku2 ай бұрын

  take it how you want it but your wheels are on fire👍

• 
  @andreamills58523 ай бұрын

  In case you didn't know the drivers side lug nuts are left handed thread .

• 
  @andreamills58523 ай бұрын

  2:37 I think that's the 218 flat head crank that's original to the car . Good luck on your build , It's a shame it still don't have the flat head . Those 218's and 230's are fun to build and hop up . Kanter Automotive and Andy Berbaums are great places to get parts for those cars .

• 
  @daryncalton87653 ай бұрын

  Yeah I wish I had original running gear to mess with. I couldn't pass it up for the price though

• 
  @arthurmccarron43793 ай бұрын

  Love love. Your car. Thanks

• 
  @stevensilver10143 ай бұрын

  try speedway motors for the brake kit

• 
  @daryncalton87653 ай бұрын

  I was thinking about one of their Mustang 2 front kits but haven't decided. I'll probably save that stuff for last

• 
  @reneespinozam.81174 ай бұрын

  👍

• 
  @eliasYC5 ай бұрын

  Was there engine mount spacers used on this? I can't seem to get mine close to this without sacrificing my oil pan hahaha

• 
  @daryncalton87655 ай бұрын

  No there wasn't. She daily drove it without any issues

• 
  @philiphapeshis12265 ай бұрын

  I am doing a 3” block it’s not angled but not removing any leafs just blocks.Should I use a shim on top Of blacks got driveshaft angle it’s a one piece rear end.

• 
  @daryncalton87655 ай бұрын

  I think you should be fine

• 
  @anthonycharles70846 ай бұрын

  It looks good

• 
  @gabebinkley13006 ай бұрын

  Thanks for having us out, I really enjoyed working on someone elses stuff for a change. I hope we can partition the shop or make a bay or something for you some day to work out of. It was alittle chilly, im excited to see this thing move under its own power

• 
  @draztikcourt7 ай бұрын

  Pretty exciting channel man! Just finished up all your videos on the Silverado build! Keep em comin!

• 
  @SQUATTROK9 ай бұрын

  Junk

• 
  @daryncalton87659 ай бұрын

  Thanks for the view 😘

• 
  @HardCoreGarage9 ай бұрын

  Shes long an lovely

• 
  @trialnterror10 ай бұрын

  Is the driveshaft long enough after doing this?

• 
  @trialnterror10 ай бұрын

  If you need me to buy you some cheap Jack stands I don’t mind, them cinderblocks 😬

• 
  @none332511 ай бұрын

  paint code ??

• 
  @daryncalton876511 ай бұрын

  Factory, Arrival Blue

• 
  @Diego03oo11 ай бұрын

  Nice truck bro

• 
  @daryncalton876511 ай бұрын

  Thank you

• 
  @jamesdavis1911 ай бұрын

  Truck starting to look good bro

• 
  @daryncalton876511 ай бұрын

  I was hoping to have it done for our show next weekend but looks like it'll be at next month's show. Just too many little things to do on top of having to redo the shock mounts in the back

• 
  @locopat111 ай бұрын

  Where did you get your seat covers?

• 
  @daryncalton876511 ай бұрын

  Clazzio

• 
  @1islanGuy11 ай бұрын

  Thats a great video. Straight forward, used this to do my b2200

• 
  @eternalvortex7031 Жыл бұрын

  It clockwise looking at your mark or clockwise looking down the rod??

• 
  @Buildsbyallen Жыл бұрын

  Can you do a video of the front setup

• 
  @Buildsbyallen Жыл бұрын

  Looking damn good brother

• 
  @alexandercraft4882 Жыл бұрын

  😆 "Promo sm"

• 
  @jasminsuljkanovic8529 Жыл бұрын

  I see them Missouri plates I’m in same state

• 
  @bigears2081 Жыл бұрын

  Hey mate, What size wheels/rims are you running? I did this process to my "86 b2000, mono with load bearing on bottom not top so to minimise drop as I also have the 4" block- I'm hardcore hard up on my fenders in rear and not in a good way. My wheel/rims are 18x9 😅 so fender roll out or cut out or do I just go back to stock leaf and block?!!!! Aarghhh. Fantastic outlay to your video also a pleasure to work from but now I'm stuck on how much it will go up in the gaurd if it wasn't hard up, would there even be room for wheel travel if I dump the clutch or turn? Faark I'm stuck on what to do hahaha 😅

• 
  @daryncalton8765 Жыл бұрын

  I was running a 205 45 17 on this truck but only because I had them laying around. I had an extended cab that was lower and on a 205 40 17

• 
  @ghostboykase9591 Жыл бұрын

  Bad ass truck bro

• 
  @daryncalton8765 Жыл бұрын

  Thank you

• 
  @bryceeastridge1494 Жыл бұрын

  i lowered my 93 with 4" blocks and a mono leaf and then i yanked the torsion bars and im getting a lot of negative camber up front. is it normal? and any way i can get it close to 0 camber?

• 
  @daryncalton8765 Жыл бұрын

  Your torsion bars are your front suspension, I would reinstall them and reindex them to get it sitting level. Camber/caster shims are the cheapest/easiest thing to try

• 
  @howdey9 Жыл бұрын

  Do you really need the overload leaf I did my Mitsubishi might max solo leaf and left all of it off just left it as the main nothing else and it slammed the back to the ground, what are the effects of putting the overload leaf back in??

• 
  @daryncalton8765 Жыл бұрын

  Just as I said, it will make it 3/8" lower by flipping the overload to the top side of the main leaf

• 
  @splaudio1 Жыл бұрын

  Nice place for sure.

• 
  @daryncalton8765 Жыл бұрын

  Nicer than it ever was when we lived there 😂

• 
  @83malibuwagon Жыл бұрын

  Thank you for saying the size of the sockets you're using and also that through socket is genius I did it with a wrench the first time amd it sucked.

• 
  @daryncalton8765 Жыл бұрын

  That's still the only time I've used that through socket set but I feel like that one time paid for it lol

• 
  @jamesdavis19 Жыл бұрын

  I bet you can't wait to start driving it and enjoy it after it finally finished bro

• 
  @daryncalton8765 Жыл бұрын

  I'm getting anxious. It should be a better driver than any bagged truck I've had in the past

• 
  @jamesdavis19 Жыл бұрын

  @@daryncalton8765 that cool bro I'm just waiting for March to go pick up the bagged truck

• 
  @jamesdavis19 Жыл бұрын

  Truck look good bro going look better once everything match with the blue color

• 
  @daryncalton8765 Жыл бұрын

  Thanks, it's slowly coming together

• 
  @jamesdavis19 Жыл бұрын

  @@daryncalton8765 your welcome bro like I said I'm about be getting a bagged full size truck next March

• 
  @joshy_h_8088 Жыл бұрын

  u said front ball joints, where they upper or lower ball joints?? i built an 04 bagged silverado and i was just wondering what u did..i got djm upper a arms on it now and was gonna cut a 1/2 out of the lower a arms this winter, which might be a bad idea..

• 
  @daryncalton8765 Жыл бұрын

  The lower ball joints were mounted like factory. With the Nfamus kit they are supposed to be with the threads facing up and come through the bottom side of the spindle

• 
  @joshy_h_8088 Жыл бұрын

  @@daryncalton8765 interesting... I'll have to check there website then, did u compare the lengths with the nfamous lowers to the stock lowers?

• 
  @daryncalton8765 Жыл бұрын

  @@joshy_h_8088 I didn't. I just knew the geometry was no good with the stock parts so went with this kit

• 
  @joshy_h_8088 Жыл бұрын

  @@daryncalton8765 right on.. appreciate the info... what state are u located in? I've meet some super cool people this past summer in the bagged truck scene and with the more truck buddies the better the hobby is... I'm in Missouri

• 
  @jamesdavis19 Жыл бұрын

  Truck coming long bro everybody make mistake when you do stuff like that about to get a bagged truck

• 
  @daryncalton8765 Жыл бұрын

  Yeah this definitely could have been avoided. I'm surprised there aren't any videos showing how everything goes together

• 
  @Buildsbyallen Жыл бұрын

  Looking good buddy

• 
  @daryncalton8765 Жыл бұрын

  Should be back on the ground this weekend

• 
  @Buildsbyallen Жыл бұрын

  @@daryncalton8765 I’m looking at getting the same kit how hard is it to align

• 
  @daryncalton8765 Жыл бұрын

  @@Buildsbyallen everything pretty much adjusts like factory. I'm going to put some gauges on the truck so I can set the ride height to a psi number and get a good alignment

• 
  @Buildsbyallen Жыл бұрын

  @@daryncalton8765 do u have a instagram

• 
  @daryncalton8765 Жыл бұрын

  @@Buildsbyallen yessir, it's @daryncalton

• 
  @jamesdavis19 Жыл бұрын

  Truck look good bro coming along well

• 
  @daryncalton8765 Жыл бұрын

  Thank you. It's headed the right direction now that I'm actually working on it rather than waiting around for parts

• 
  @jamesdavis19 Жыл бұрын

  @@daryncalton8765 you're welcome bro those Wheels you got on it looks better than what you had on it when you got it

• 
  @daryncalton8765 Жыл бұрын

  @@jamesdavis19 definitely. I pulled them off my other truck when I put 24s on it and really didn't want to let them go so I'm glad I got this to give them a good home

• 
  @jamesdavis19 Жыл бұрын

  @@daryncalton8765 well they look good on it bro

• 
  @arlynangalich5465 Жыл бұрын

  ❣️ 𝕡𝕣𝕠𝕞𝕠𝕤𝕞

• 
  @blitz1735 Жыл бұрын

  how low did this drop the truck

• 
  @tonyalvarez2401 Жыл бұрын

  Do the rear shocks run low with this method? I used a 4 inch block without removing any leafs and my shocks sit about an inch from the ground. Trying to raise the shocks up somehow. Thanks you

• 
  @daryncalton8765 Жыл бұрын

  Yes, blocks will always hang your shocks low. You could do a shock tab welded to the rear-end itself

• 
  @wheelspkruel Жыл бұрын

  What about if I don't take non just put the 3 inch blocks

• 
  @Steven-te5xe Жыл бұрын

  Would it raise if you did a mono leaf or would it go lower?

• 
  @Steven-te5xe Жыл бұрын

  @@wheelspkruel your shocks are still going to be low to the ground like about 5 inches off the ground.

• 
  @ttrube Жыл бұрын

  What size wheels and tires?

• 
  @daryncalton8765 Жыл бұрын

  205 45 17 iirc

• 
  @xokoy. Жыл бұрын

  you're dead ass inspiring me bro, I just got an 03 bagged Silverado for a stock single cab Silverado for whatever reason the guy was loooking for a more stock vehicle & well I'm blessed to say I saved so much with the bags already installed. Interior is 10/10 but bags need wiring to operate on their own without manually filling them with a portable compressor, other than that it's fucking nice. You're definitely inspiring.

• 
  @clouthunterz7812 жыл бұрын

  Katty whompus

• 
  @neckcuttaxxx16322 жыл бұрын

  Is this a troll video lol. Prime example why KZread shouldn't have removed the dislike button

• 
  @Buildsbyallen2 жыл бұрын

  Looking good get rid of that lame box

• 
  @daryncalton87652 жыл бұрын

  It's out. Check out the other videos on the truck

• 
  @jimmyortiz41132 жыл бұрын

  Bye Newell’s a Have Mae foros pitchers de Rams qué es rock andas sexo First Enid cole dama de Black a Lines The Class a Lykke Your Name Your caro usted hora d’Estrac o yo Name Jimmy Ortiz Jimmy Ortiz Jaro Track Name On Track zoom a fleurs Sound seis de Yuri Black o Much