Пікірлер

• 
  @MichaelLinhart-e6i10 күн бұрын

  Use more reducer in your paint to get less orange peel

• 
  @francoislaurentTrollet12 күн бұрын

  Nice job ! I will do this next week end. Do you have a reference for the oring or a standard one will fit ? thanks !

• 
  @coreysgarage638911 күн бұрын

  @@francoislaurentTrollet I just used one that fit from a kit of different sizes.

• 
  @francoislaurentTrollet11 күн бұрын

  @@coreysgarage6389 super ! Thanks Corey !

• 
  @isaacmartin3DArtist12 күн бұрын

  Great video! I will do on my Peugeot 307 cc, it seems has the same hidraulic that is loosing oil from the top.

• 
  @massimofrancavilla957716 күн бұрын

  Hi Corey, seeing you do it seems like child's play! WoW! One question, you cut the cylinder at the base with a tool, but then doesn't that piece you removed have to be re-welded? Or is it not necessary because the pin guarantees the seal? Thank you very much

• 
  @coreysgarage638916 күн бұрын

  @@massimofrancavilla9577 You basically cut off the crimp holding on the end cap, but like you said the pin actually holds it and the Oring seals it so you don’t need to re-crimp or weld it.

• 
  @massimofrancavilla957716 күн бұрын

  @@coreysgarage6389 😇excellent! The O'ring you put in the cap, what size is it? Do you also need to replace the small o'rings on the hydraulic oil delivery and return hoses?

• 
  @massimofrancavilla957716 күн бұрын

  One last question, when you reconnect everything, is there a bleeding to remove the air and put pressure back into the hydraulic circuit?

• 
  @coreysgarage638916 күн бұрын

  @@massimofrancavilla9577 It will self bleed by running the system back and forth and topping off the reservoir. Everyone asks about the size of the Oring and I honestly have no idea, I just used one that fit.it doesn’t hurt to change out all orings on things you remove but if they are in good shape you don’t have to.

• 
  @TysonDavidson-l5z16 күн бұрын

  Hi! I’m wondering what the immobilizer issue was that you were able to get it running? I have a friends 08 Eos that came up with the etc light and now it won’t run. If you can help me out that’d be awesome! Thank u!

• 
  @abymondesir2318 күн бұрын

  What year?? And is it a v8?

• 
  @matthewryan991020 күн бұрын

  Thanks so much Cory!!! This fix just saved us a ton of money. We just finished and I wanted to add a few things. First we watched another video to see exactly where the 2 spring washers should fit in. We also watched a video on just taking the RAM apart...we needed to brace and hammer it out. Took a lot more force then yours did but it eventually came out. We had lost quite a lot of hydraulic fluid so when we first tested it, it still wasn't working. Watched another video on filling the fluid. We filled, put the top up and down 3 times to get rid of air and then filled to max again and put the trunk back together. Going up and down perfectly now!!!

• 
  @less2worryabout23 күн бұрын

  GOOD JOB SHOWING THAT INFO

• 
  @coreysgarage638923 күн бұрын

  Thank you

• 
  @GirthyTikTak23 күн бұрын

  Never seen anyone wet polish a car before. Interesting. 🤔

• 
  @johndanella822825 күн бұрын

  Am I missing something??!! Im not here to bash believe me I know how these jobs are. But here it comes! At 3:34 you say most of the work is on the bottom, you remove one transfer case bolt and whallah motor is out!! I'm assuming there may be a few steps missing for first timers🤔 I always say I'm going to start making videos, maybe today I'll start with pulling an engine from a charger!! Camera is a pain in the ass tho😂 . I did enjoy the video tho, keep up the good work!!

• 
  @edu1281Ай бұрын

  Bought a 2009 328i xdrive, previous owner said it only needed a starter.. once i did the starter, I compression tested, car was $800 so i expected it to have low compression..as it did... thinking about just swapping an engine into it... suspension, exterior and interior are pretty amazing for a 188k mile car.. don't know how to go about it

• 
  @vitaliy1705Ай бұрын

  Thank you my friend. My PEUGEOT 307 CC has the same (disease) history and they have the same hydraulic cylinders, only without sensors. I think they are produced by the same manufacturer for all car manufacturers. Thank you again.

• 
  @coreysgarage6389Ай бұрын

  Awesome, hope this helps.

• 
  @bjodaddyoАй бұрын

  I learned the hard way to NEVER color sand single stage metallic.

• 
  @russellfoote2470Ай бұрын

  that was metallic single stage ?

• 
  @nomasknoway9903Ай бұрын

  Statistics show that ladders are more dangerous than a load gun. That's why I have ten guns, in case some maniac tries to sneak in a ladder!

• 
  @famousfrost13Ай бұрын

  I need to fix my 2009 Mitsubishi Eclipse Spyder H.C. thank you! I have an idea of the task ahead of me! Them Vato's(guys) at Mitsubishi don't know what to do or what they are doing I have to do everything myself!

• 
  @bobadingoАй бұрын

  Never EVER! Directly wet sand metallic paints.. .

• 
  @xurrete82Ай бұрын

  Gracias, este sistema es válido para cilindro hidráulico Peugeot 307cc y Peugeot en general, mil gracias.

• 
  @codybranch9790Ай бұрын

  Do you still have this mopar 11

• 
  @coreysgarage6389Ай бұрын

  Yes I do

• 
  @freshbutplain1144Ай бұрын

  Looks great! Thanks for sharing. What psi did you end up using?

• 
  @marienandre2271Ай бұрын

  Thank you For The type it work Perfectly but the system is all mixte up it doesn’t open and close properly thank you for your help

• 
  @johnsilverchain92Ай бұрын

  you need to use 80 grit before polishing

• 
  @xxxtra_guacamoleАй бұрын

  U still hsve the super bee harmess?

• 
  @LadyDivaD1AnOnly2 ай бұрын

  GREAT job 👏! Ty😊

• 
  @ooigfgnnkhjjnc2 ай бұрын

  Dont use harbor freight gun.

• 
  @chocorock232 ай бұрын

  what did you end up doing with the car?

• 
  @coreysgarage63892 ай бұрын

  I sold it.

• 
  @LorenzoVerniers2 ай бұрын

  What are the dimensions of the o-ring?

• 
  @fomoco1732 ай бұрын

  I know this was a while ago. Question! How much paint did you use? Was that done with 1 gallon of color? Nicely done, love the color!

• 
  @demetriusbarnes2 ай бұрын

  Impressive work 😎💪 🛞

• 
  @intunewithcars94842 ай бұрын

  good work tbh

• 
  @hughjassman89852 ай бұрын

  This should have been done with a long block not that little thing...waste of time.. guaranteed it won't be arrow straight

• 
  @josephcapra84842 ай бұрын

  I bought my 2004 'vert with a reciept in the glove box for $4500 for rebuilding all of the rams. Now it leaks again. Not much though. My question is : "Are the rams you replaced the ones that control the tonneau cover? Mine usually stops just short of flush with the top down, and a TECH 2 shows one of those leaking. DId yours have the same symptom?

• 
  @markekberg83712 ай бұрын

  Most single stages are 4.1.1. I am just starting to spray my 66c10 resto

• 
  @mathewjenkinson74032 ай бұрын

  I did this and now im getting a message that top can only be opened manually.

• 
  @pro_cocoyt78782 ай бұрын

  Is that a mopar edition? If so I have one too, supposedly only 900 made in America so it’s really cool seeing another one lol

• 
  @coreysgarage63892 ай бұрын

  Yes it is!

• 
  @pro_cocoyt7878Ай бұрын

  @@coreysgarage6389nice

• 
  @centralscrutinizer762 ай бұрын

  I have bought urethane kits from TCPglobal , jet black and rock moss green , good paint for the money, I think the secret is several light coats , if your prep is good and you take your time it comes out fine . I love the color you used, I have never been bold enough to try metallic .

• 
  @coreysgarage63892 ай бұрын

  Thank you, it seems to be good paint for the money.

• 
  @slvs912 ай бұрын

  Hi,where was the roof stopping when trying to fold the roof , mine is getting stuck half way in the air

• 
  @coreysgarage63892 ай бұрын

  Yes when it’s low on fluid that is one of the possibilities.

• 
  @slvs912 ай бұрын

  @@coreysgarage6389mine wasn't low , no visible leak , i suspect a sensor but i don't know which sensor could cause it to stop halfway

• 
  @henryramirez11662 ай бұрын

  Sooo what it's still amazing it looks Good man you had fun your truck not anyone else love the color

• 
  @coreysgarage63892 ай бұрын

  Thanks man!

• 
  @terrysibley96362 ай бұрын

  Actually, perfection is an illusion, what we seek is excellence. Nice job explaining.

• 
  @gerardfenn39882 ай бұрын

  Hey Corey, Nice job bringing that paint to as smooth as can be. What is taking away from this is not your fine sanding or compounding, it has to do with the paint itself. The metallic of the paint is not appearing to be evenly distributed. Only way to fix this is to respray it. UGH!! I know you know this and are hoping for the best. Good Video. Keep them coming. Thanks.

• 
  @MrCbell572 ай бұрын

  Even though this is an older video, I can’t help from interjecting that most everything you’ve done is wrong. You need another coat or two or three of sandal primer so that when you block it out, you don’t get into the metal and you don’t expose any filler and where you don’t expose any guy, so that your whole vehicle is covered with gray no difference in anything that way you’ll have a slick body truck that the paint will lay down on and look like a very good paint job. Right now you’re gonna have waves dips and imperfections in it, which if you’ve done this much work before Not a little more 10% more to get an even better quality job because you’re the one that’s going to have to say yeah I painted it and they’re just gonna shake their head and say yes I I see but don’t ever paint my vehicle please. 320 is used after 220 then 400 then 600. If you don’t follow the steps right like you just did you’re going to have scratches at primer sealer may not cover. Unless you put it on like it’s a primer coat and then take it down to 400 then 600. you’re going to have. I understand it’s an old truck and you don’t care about it but you’re giving people the wrong information on here that they can just do it with any kind of sandpaper. Worn out sandpaper does not cut it contours. So the lumps and valleys and low places it just follows it doesn’t , flatten out a rough area. 100 grit sizes is how you take it down properly. You are also using a primer sealer when you really don’t have to. It’s not going to help if there is any moisture up underneath that truck anywhere it’s still going to bubble. It’s more expensive when if you had taken it to 600 and smooth it with the right steps there would be no reason for seal. It would all be gray and then you could use that as a solid color to base your color off of. Remind me when I say you can do whatever the heck you wanna do on your own thing but don’t broadcasted and make it look like you know what you’re doing because you’re giving the wrong information to the masses which fail to do the job right because they think you know what you’re doing When you don’t. I mean, you know what you’re doing, but you’re not teaching that. if you tell someone on here while I just did this and it worked out OK they’re going to do the same thing. Think about this meditate on it. Ask yourself why you’re busy dispensing incorrect information to the public so they get caught up in the wrong path. I’m blown away. You’re worrying about dust yet. You didn’t finish the truck properly. Oh my God help me now. Also urethane paint is not tricky. You’ve missed titled your video whether it was on purpose to make people look at it. That’s not how you dispense quality information to the public. You don’t lure them in with the sexy photo of some girls bum and then talk about pain your thing is not tricky , if anything I’d say water-based paint or enamel paint would be far more tricky if not use to it.

• 
  @contactpq2 ай бұрын

  I just bought one on FB marketplace for $1800 and couldn't figure out how to unlock the doors either..lol...or work the radio or anything

• 
  @a.j.casper88732 ай бұрын

  Great vid. I enjoyed

• 
  @coreysgarage63892 ай бұрын

  Thank you

• 
  @JayWicked12 ай бұрын

  Can I buy it

• 
  @coreysgarage63892 ай бұрын

  You can actually. Should be listed soon.

• 
  @JayWicked12 ай бұрын

  @@coreysgarage6389 how much?

• 
  @lifeshare90743 ай бұрын

  How can you tell if it’s an N51 or an N52??

• 
  @custodioespinal49953 ай бұрын

  Great job great video my is👍 leaking on the same side thanks a lot for letting me know how to do this

• 
  @BeemerReborn3 ай бұрын

  Did you try the vanos

• 
  @coreysgarage63893 ай бұрын

  It was a rod bearing, I swapped the engine in a different video.

• 
  @BmwMe-uh9sy3 ай бұрын

  over 100k miles yikes.

• 
  @manuelramirez5773 ай бұрын

  Gracias me sirvio mucho.

• 
  @computernostalgia62933 ай бұрын

  How long does single stage paint last outside?