Nicely done! Have you ever attempted a re-entry with the casting deck on?
@AndreasUnderwood-em1bg10 ай бұрын
Great motor pushed my 14 foot boat with no problem iam a big guy would recommend this to my friends
@playinghookywithdavidchapa3872 жыл бұрын
F1… so youre in the austin area? Im in south texas myself… have you tried this in salt water?
@dune322 жыл бұрын
This is amazing 😁
@justinbearce97972 жыл бұрын
Great ideas on this boat! I do just want to make one comment though. It appears you have the power coming from the battery going into the male side of the connector? This is generally a bad idea. That means you have power going to exposed conductors so if something conductive brushes up against the prongs you are shorting the battery. A good rule of thumb is to always have the power side of a connector be female so you don’t risk shorting it out or shocking yourself. 12v battery isn’t really going to do much to you it doesn’t have enough potential but if you short out the battery that could make for a bad time. If I saw that wrong I apologize. I am an electrical engineer so that’s something I always have to pay attention to when I’m designing something. Just wanted to pass along the information.
@dealerslicenseops2 жыл бұрын
links to buy those mods?
@waynegriffith62062 жыл бұрын
How do you check the PSI when inflating I’m having a problem with finding a good reliable gauge. Thanks
@scottallen35023 жыл бұрын
Look cool. How u get off when u landing?
@victorbloom82863 жыл бұрын
I haven't watched Formula 1 since Nigle Mansell
4 жыл бұрын
RESPEKT 💪😉👍
@edheinlein37474 жыл бұрын
Hey Mike, you and others here are referencing "Nate D.". Could you possibly provide a link to his youtube so we can easily find his contributions? Thanks in advance!
@rodwesling86604 жыл бұрын
Love your set up! I have a Quad inflatable with the motor on the rear! The reason I mounted it on the rear is that it`s really hard to step over the two pontoons when the motor is on the front! I`m looking at seting it up so I don`t have to turn around to steer it! Is the seat mounted on the ball bearing plate that can be bought seperately for the seat? What are you using for the stem that the seat pivots on? Thanks Rod.
@mikec36054 жыл бұрын
Hello Rod. I bought the extended seat swivel years ago at academy. The base plate mounted to the frame and the extended rod slides into it. 5” seemed to be the perfect height. Search amazon or a local sports store. I would send a pic, but I don’t have the pontoons anymore.
@Hoss_19665 жыл бұрын
I still am unclear as to why you mount the motor on the front, you say for balance, but you then said the front now is the back of the boat. So you reversed it, so could you just have mounted the battery on the front, and then all else remains stock. You would end up with the same result. Or am I missing something, thx
@premiumgifts5 жыл бұрын
Hello.... I can tell you back years ago when the motor was front mounted was mainly so you didn't have to reach behind you to control the motor...
@xjonathanx795 жыл бұрын
Thank you for the vid. What do you recommend to charge your battery: any brand you like
@mikec36055 жыл бұрын
I just grabbed one from auto zone
@kellybellminiatures5 жыл бұрын
Im disabled and in my 50s and have just purchased this to get out on the water with my friend who like to kayak Is there any way one could make a conopy for this little boat?
@mikec36055 жыл бұрын
You could rig something up with PVC and shade screen, but some good fishing clothes, hat and buff would be a better bet.
@wyldbill1003 жыл бұрын
Go to one of the home improvement centers and buy a riding lawn mower sun "umbrella" and mount it to your boat's chair. EASY!
@dustinetokiko5 жыл бұрын
Hi Mike, great set-up. I'm new to the world of pontoon boats. Can you tell me the size of the PVC components for the rod holders on the seat back? Also, what is the length of each holder you used? Thanks so much!!! Did you ever post something about your trailer modifications? I just bought a used Harbor Freight folding trailer and the width is only 4' so I need to make a platform at least 6' wide.
@mikec36055 жыл бұрын
I used 1 1/4” pvc for everything. Just cut to fit.
@frenchbrit50985 жыл бұрын
I am not a fan of having a front mount trolling motor because of prop injury to leg or foot. I get everyone's concern about weight in the back. I attached 2 boat bumpers to the bottom of the basket and it helped greatly in keeping the rear of the pontoon up with about 80 lbs of battery and motor. I also moved the seat all the way forward for better weight distribution and keep the pontoons inflated to 2.5 lbs
@gt-yr5sn5 жыл бұрын
-why don't you spin the control head around so your not running the motor in reverse?
@mikec36055 жыл бұрын
g t it runs fwd. I made the the front of the boat the back when going from spot to spot. Also offsets the weight of the battery
@flushot65135 жыл бұрын
I dig it but the balance thing i dont carry much one small tackle box and 2 rods should be more stable than feeling like your gonna tip like in a kayak
@michaelhoggatt30515 жыл бұрын
I want to know more about the trailer you have it on.
@scouter69265 жыл бұрын
Just unpackaging and assembling my second pontoon boat , Outcast) and unpacking a newly purchased pontoon boat. I will copy your modifications as the modifications as when I did on my first boat as there was a lot of trials and even more errors. Tight lines👍👍 Tight lines
@reelphatties64265 жыл бұрын
Bad ass rig
@raywilliamson93966 жыл бұрын
Mike do you ever experience issues with the wind pushing you where the motor can't control the direction. Not a hard wind but more of a breeze. What pressure do you inflate you boat to. Drum tight or some what soft.
@raywilliamson93966 жыл бұрын
Mike the Minkota trolling motor carries 42 amps. Did you use a 50 amp fuse block ( inline fuse) with your motor
@zlwebb19896 жыл бұрын
You dont need the motor in the front people! You need to get the toons up to 2.0-2.5 psi! I have a group 27 batter and a 55lb thrust trolling motor in the back and I have 0 sag. Use an electric pump to quickly get it inflated then use a dual action hand pump with as gauge attachment to reach the proper psi
@dbomber696 жыл бұрын
Any one try putting the motor mount assembly and putting the whole thing in the holes for the foot rests? A welder could weld brackets for the battery rack to the foot rest tubes so you put the rack in front too so you could stand. Maybe weld up a new battery holder to fit in the tubes where the rack used to go in back.
@raywilliamson93966 жыл бұрын
Mike what gauge wire are you running from the battery to the motor? the motor has 8 or 10 gauge wire on it.
@raywilliamson93966 жыл бұрын
Mike are you running the motor in reverse as mounted. Saw another video where that is the case and they claimed the boat ran faster.
@mikec36056 жыл бұрын
Try it both ways. The best way is the way that works for you.
@denniskane34606 жыл бұрын
hey mike how do get on your pontoon with all the stuff mounted on the front ? great set-up though like the trailer to thanks
@mikec36056 жыл бұрын
Thanks Dennis. Gotta get your feet wet unless you wear some wading boots. Just step over the motor on either side close to the pontoon. Now you will be standing between the seat and motor. Push the boat just far enough so it’s floating and slide on the seat. Don’t go deep before getting on the seat. Easier than it looks or sounds.
@mikec36056 жыл бұрын
Step over Motor mount, not the motor...
@DownTheRabbit-Hole6 жыл бұрын
This is so freekin lame! Just buy a bass boat. Rowing on lakes, drifting on rivers and stealth finning is what makes tooning a great sport. What is wrong with a little exercise. "Put in" where you want to fish...oh well..no offense. Leave it to a spinning rod bass fisherman to have 14 rods, 6 nets, 3 bait boxes, 600 lures, 4 ice chest full of beer ( I only have 2, Ha!), 3 fish finders, an underwater video cam, 100lbs of video equipment, including drone, raingear, camping equipment, 4 different motors, does that ABS plumbing system go to an onboard toilet? Ha! Hope you can take a little ribbing.... Fishing is great whatever your style....Good luck...
@mikec36056 жыл бұрын
None taken. Actually pretty funny and a little bit true!
@raywilliamson93966 жыл бұрын
You are a moron.......simple.
@taylorcurtis10097 жыл бұрын
hey mike, working on getting my colorado setup. what Kind of battery are you using? and what is the weight of the battery do you think?
@dannydelarosa63757 жыл бұрын
Mike, what connectors did you use? Are they 20amp?
@kbbgood7 жыл бұрын
What model number is your motor. Looks to be a shorter shaft then most.
@stevegate26527 жыл бұрын
Hi Mike, I like the idea of connect/disconnect power so much. I've looking around for the receptacle but haven't success. Could you please share where you get it? Thanks a lot Mike.
@chub73877 жыл бұрын
This is a step up on Nate D . I'd love to use this for my Wilderness. I have a 2.5 Hp 4 stroke for the back side and a 40 Lb thrust Minn Kota for the front side to troll with. So inspiring ; the both of you !!
@mikec36057 жыл бұрын
Mike Kelly thanks for the positive feedback! Nate D is owed the credit. Please post the next evolution.
@chub73877 жыл бұрын
Yup; I viewed the two Vids. Both were great and I'll pick a bit from them both to mod my Toon with. keep up the great work. ;-A~~
@waynewauters9397 жыл бұрын
I would like to see more about the Trailer as well
@mikec36057 жыл бұрын
Wayne Wauters I still plan on posting, but been too busy.
@raywilliamson93967 жыл бұрын
The tubing looks to be 20" actual width is much wider.
@raywilliamson93967 жыл бұрын
Mike just looking at the front end/transom it would appear to be approx 20" wide, just the tubing length. I like your design more than Mike D's. Much stronger and supportive of the motor. the boards appear to be maybe 1 x 8...?? Just a really strong set up.
@raywilliamson93967 жыл бұрын
Please do a video on the construction of your trailer. Looks perfect to haul your float boat.
@mikec36057 жыл бұрын
It's a small boat trailer I modified. I'll upload a video with some close ups of what I did. It works well
@mikec36056 жыл бұрын
Sorry I never posted on the trailer. Sold the pontoons and trailer. Honestly, the trailer was kind of heavy, but got it for free, so it worked.
@raywilliamson93967 жыл бұрын
That is a descent trailer would you like to share some dimensions and axle type.
@raywilliamson93967 жыл бұрын
I think I can figure it out by assembling by setting the 2x4 on the 19" cross member with the 3 way installed not fastened. I really like you method and am trying to copy it with little mods. How well does you XT tow with the motor installed or do you remove it when towing
@mikec36057 жыл бұрын
That's how I got the fit right. I always removed the motor for peace of mind.
@raywilliamson93967 жыл бұрын
Mike d you remember the length of the spacer between the 3 way and 4 way on the motor mount. Has to be more than what Nate used , looks longer maybe 4" s.
@raywilliamson93967 жыл бұрын
Where did you find the 5" swivel base. Everything I find is like 11"
@mikec36057 жыл бұрын
Academy Sports
@raywilliamson93967 жыл бұрын
Mike do you have a video that shows the added dimensions and added materials? your mods really look great
@mikec36057 жыл бұрын
Ray Williamson Thanks. Didn't really get into a lot of measurements on this. Just enough to make sure it fit. This video is as detailed as I got, but "NateD" has very specific details on KZread
@raywilliamson93967 жыл бұрын
Thanks. The idea is what I'm working. Great job tho. I might change the pole holders some
@raywilliamson93967 жыл бұрын
What air pump do you use that fits the 1 1/4 tubing
@mikec36057 жыл бұрын
I got a 2 way pump from academy sports. It's made for inflating air mattresses. By 2 way I mean it pushes air when you push and when you pull the handle.
@raywilliamson93967 жыл бұрын
Thanks that saves room
@1515chollins7 жыл бұрын
Hi mike. With the raised seats, would that be a problem with using the oars at your current seat height?
@mikec36057 жыл бұрын
I never used the oars after the mod. It will change the dynamics. Depends on what you your intentions are for the boat. If mostly trolling, not a big deal. If mostly rowing, might not work for you. But that depends. Are you using oars to direct down river, and troll on larger portions? It is really a matter of comfort verses efficiency. I used the boat on lakes only. Rowing was arduous at best in good conditions. It's really designed to float down a river. God forbid you get a headwind and no current.
@1515chollins7 жыл бұрын
Got it. I use my oars quite a bit so I probably need to use low. I wanted to upgrade my seat from the padded plastic but wasn't sure my options. I read the boat seats like yours hold water hence why I was interested in raising the seat. I guess back to the drawing board. I've looked on the forums and KZread but not much info on seat upgrades and the few all have raised seats.
@cheevue96707 жыл бұрын
hey mike where can i get the trolling motor upgrades and where can i buy direct
@mikec36057 жыл бұрын
I just went to Academy. Honestly, I'm disappointed with the connector I used. Advise looking for a 2 pin adapter.
@NikkiPage7 жыл бұрын
Hey Mike! Beautiful rig! I ordered my XT and will arrive in the next few days. I will be adding a trolling motor and front mount. What battery do you recommend? My local pond is Lake Erie and drifting in the bays you can cover some serious distance. I want to be sure that I can get back to the dock :) Thanks in advance!
@mikec36057 жыл бұрын
Congrats! That's a pretty decent sized pond!!! You can buy a battery monitor that lets you know the charge. Get a "Deep Cycle" battery and maintain the charge when stored. Check the reserve capacity and plan your trips accordingly. I think mine was 175 min @ 25 amps. Don't run the troll on max. I usually kept mine on 3 when travelling with a 30lb Minkota. Use the wind to your advantage. Always troll upwind to start if possible. And ALWAYS take your oars just in case. Have Fun!
@nigelallum46507 жыл бұрын
Hi Mike have you ever seen a xt with a floor/leaning post? is it possible ?.I have followed your motor mount video and it works well.But I must say the steering was quite erratic,I did rotate the head 180 degrees would that be why it is skittish? I have purchased.Bullnose Rudder but have not had time to try it out yet..Any help would be greatly recieved. I would really like to fit a floor and leaning post for Pike fly fishing Cheers an Tightlines
@mikec36057 жыл бұрын
Hello Nigel. The motor should mount and orient just like the video. Does the motor push the boat, or pull the boat towards it? It should push the boat away from it, otherwise steering is ridiculously slow and frustrating. The bow becomes the stern when traveling. With that being said, I would never consider tracking a better quality of this boat. You will greatly improve speed and response by doing it this way, but it takes a little finesse to keep a straight line. Try adjusting the locking cam so the motor requires some pressure to turn it. Make minor steering adjustments when at speed and that should help. I have fished standing by placing my feet on the frame, so a platform may be possible. I thought about it, but didn't wan't to add weight, set-up time... Also, a platform would make entry and exit more difficult. The seat was so comfy, I didn't want to stand! Let me know if this helps. Now go get bit
@nigelallum46507 жыл бұрын
Hi Mike Thanks for the advise.I turned the motor head 180degs by removing the locating screws.I'm in the US for another 5/6 weeks when I get home I will work it out.As the platform.One of the reasons I thought/think it might help is that with river launching from a built up bank ,It is hard to get in to the toon.And being 280lb 6'1'' and as near as dam it 65 i thought a step on approach would suit me better,also better to cast a fly from.I would see if it was feasible to have it drop on by the way of upturned U shaped brackets.So if launching from a sloping bank i could walk in and the drop the small platform into potion.Thaks for the advice will keep you posted.Cheers and tight lines.PS got bit yesterday 17lb Steelhead plus a8 and 7lb plus lost the biggest of the day on a drift boat on the Wynoochee in WA buzzing!!!!!!!!!!!
Пікірлер
So you don't use the ore's anymore?
Nicely done! Have you ever attempted a re-entry with the casting deck on?
Great motor pushed my 14 foot boat with no problem iam a big guy would recommend this to my friends
F1… so youre in the austin area? Im in south texas myself… have you tried this in salt water?
This is amazing 😁
Great ideas on this boat! I do just want to make one comment though. It appears you have the power coming from the battery going into the male side of the connector? This is generally a bad idea. That means you have power going to exposed conductors so if something conductive brushes up against the prongs you are shorting the battery. A good rule of thumb is to always have the power side of a connector be female so you don’t risk shorting it out or shocking yourself. 12v battery isn’t really going to do much to you it doesn’t have enough potential but if you short out the battery that could make for a bad time. If I saw that wrong I apologize. I am an electrical engineer so that’s something I always have to pay attention to when I’m designing something. Just wanted to pass along the information.
links to buy those mods?
How do you check the PSI when inflating I’m having a problem with finding a good reliable gauge. Thanks
Look cool. How u get off when u landing?
I haven't watched Formula 1 since Nigle Mansell
RESPEKT 💪😉👍
Hey Mike, you and others here are referencing "Nate D.". Could you possibly provide a link to his youtube so we can easily find his contributions? Thanks in advance!
Love your set up! I have a Quad inflatable with the motor on the rear! The reason I mounted it on the rear is that it`s really hard to step over the two pontoons when the motor is on the front! I`m looking at seting it up so I don`t have to turn around to steer it! Is the seat mounted on the ball bearing plate that can be bought seperately for the seat? What are you using for the stem that the seat pivots on? Thanks Rod.
Hello Rod. I bought the extended seat swivel years ago at academy. The base plate mounted to the frame and the extended rod slides into it. 5” seemed to be the perfect height. Search amazon or a local sports store. I would send a pic, but I don’t have the pontoons anymore.
I still am unclear as to why you mount the motor on the front, you say for balance, but you then said the front now is the back of the boat. So you reversed it, so could you just have mounted the battery on the front, and then all else remains stock. You would end up with the same result. Or am I missing something, thx
Hello.... I can tell you back years ago when the motor was front mounted was mainly so you didn't have to reach behind you to control the motor...
Thank you for the vid. What do you recommend to charge your battery: any brand you like
I just grabbed one from auto zone
Im disabled and in my 50s and have just purchased this to get out on the water with my friend who like to kayak Is there any way one could make a conopy for this little boat?
You could rig something up with PVC and shade screen, but some good fishing clothes, hat and buff would be a better bet.
Go to one of the home improvement centers and buy a riding lawn mower sun "umbrella" and mount it to your boat's chair. EASY!
Hi Mike, great set-up. I'm new to the world of pontoon boats. Can you tell me the size of the PVC components for the rod holders on the seat back? Also, what is the length of each holder you used? Thanks so much!!! Did you ever post something about your trailer modifications? I just bought a used Harbor Freight folding trailer and the width is only 4' so I need to make a platform at least 6' wide.
I used 1 1/4” pvc for everything. Just cut to fit.
I am not a fan of having a front mount trolling motor because of prop injury to leg or foot. I get everyone's concern about weight in the back. I attached 2 boat bumpers to the bottom of the basket and it helped greatly in keeping the rear of the pontoon up with about 80 lbs of battery and motor. I also moved the seat all the way forward for better weight distribution and keep the pontoons inflated to 2.5 lbs
-why don't you spin the control head around so your not running the motor in reverse?
g t it runs fwd. I made the the front of the boat the back when going from spot to spot. Also offsets the weight of the battery
I dig it but the balance thing i dont carry much one small tackle box and 2 rods should be more stable than feeling like your gonna tip like in a kayak
I want to know more about the trailer you have it on.
Just unpackaging and assembling my second pontoon boat , Outcast) and unpacking a newly purchased pontoon boat. I will copy your modifications as the modifications as when I did on my first boat as there was a lot of trials and even more errors. Tight lines👍👍 Tight lines
Bad ass rig
Mike do you ever experience issues with the wind pushing you where the motor can't control the direction. Not a hard wind but more of a breeze. What pressure do you inflate you boat to. Drum tight or some what soft.
Mike the Minkota trolling motor carries 42 amps. Did you use a 50 amp fuse block ( inline fuse) with your motor
You dont need the motor in the front people! You need to get the toons up to 2.0-2.5 psi! I have a group 27 batter and a 55lb thrust trolling motor in the back and I have 0 sag. Use an electric pump to quickly get it inflated then use a dual action hand pump with as gauge attachment to reach the proper psi
Any one try putting the motor mount assembly and putting the whole thing in the holes for the foot rests? A welder could weld brackets for the battery rack to the foot rest tubes so you put the rack in front too so you could stand. Maybe weld up a new battery holder to fit in the tubes where the rack used to go in back.
Mike what gauge wire are you running from the battery to the motor? the motor has 8 or 10 gauge wire on it.
Mike are you running the motor in reverse as mounted. Saw another video where that is the case and they claimed the boat ran faster.
Try it both ways. The best way is the way that works for you.
hey mike how do get on your pontoon with all the stuff mounted on the front ? great set-up though like the trailer to thanks
Thanks Dennis. Gotta get your feet wet unless you wear some wading boots. Just step over the motor on either side close to the pontoon. Now you will be standing between the seat and motor. Push the boat just far enough so it’s floating and slide on the seat. Don’t go deep before getting on the seat. Easier than it looks or sounds.
Step over Motor mount, not the motor...
This is so freekin lame! Just buy a bass boat. Rowing on lakes, drifting on rivers and stealth finning is what makes tooning a great sport. What is wrong with a little exercise. "Put in" where you want to fish...oh well..no offense. Leave it to a spinning rod bass fisherman to have 14 rods, 6 nets, 3 bait boxes, 600 lures, 4 ice chest full of beer ( I only have 2, Ha!), 3 fish finders, an underwater video cam, 100lbs of video equipment, including drone, raingear, camping equipment, 4 different motors, does that ABS plumbing system go to an onboard toilet? Ha! Hope you can take a little ribbing.... Fishing is great whatever your style....Good luck...
None taken. Actually pretty funny and a little bit true!
You are a moron.......simple.
hey mike, working on getting my colorado setup. what Kind of battery are you using? and what is the weight of the battery do you think?
Mike, what connectors did you use? Are they 20amp?
What model number is your motor. Looks to be a shorter shaft then most.
Hi Mike, I like the idea of connect/disconnect power so much. I've looking around for the receptacle but haven't success. Could you please share where you get it? Thanks a lot Mike.
This is a step up on Nate D . I'd love to use this for my Wilderness. I have a 2.5 Hp 4 stroke for the back side and a 40 Lb thrust Minn Kota for the front side to troll with. So inspiring ; the both of you !!
Mike Kelly thanks for the positive feedback! Nate D is owed the credit. Please post the next evolution.
Yup; I viewed the two Vids. Both were great and I'll pick a bit from them both to mod my Toon with. keep up the great work. ;-A~~
I would like to see more about the Trailer as well
Wayne Wauters I still plan on posting, but been too busy.
The tubing looks to be 20" actual width is much wider.
Mike just looking at the front end/transom it would appear to be approx 20" wide, just the tubing length. I like your design more than Mike D's. Much stronger and supportive of the motor. the boards appear to be maybe 1 x 8...?? Just a really strong set up.
Please do a video on the construction of your trailer. Looks perfect to haul your float boat.
It's a small boat trailer I modified. I'll upload a video with some close ups of what I did. It works well
Sorry I never posted on the trailer. Sold the pontoons and trailer. Honestly, the trailer was kind of heavy, but got it for free, so it worked.
That is a descent trailer would you like to share some dimensions and axle type.
I think I can figure it out by assembling by setting the 2x4 on the 19" cross member with the 3 way installed not fastened. I really like you method and am trying to copy it with little mods. How well does you XT tow with the motor installed or do you remove it when towing
That's how I got the fit right. I always removed the motor for peace of mind.
Mike d you remember the length of the spacer between the 3 way and 4 way on the motor mount. Has to be more than what Nate used , looks longer maybe 4" s.
Where did you find the 5" swivel base. Everything I find is like 11"
Academy Sports
Mike do you have a video that shows the added dimensions and added materials? your mods really look great
Ray Williamson Thanks. Didn't really get into a lot of measurements on this. Just enough to make sure it fit. This video is as detailed as I got, but "NateD" has very specific details on KZread
Thanks. The idea is what I'm working. Great job tho. I might change the pole holders some
What air pump do you use that fits the 1 1/4 tubing
I got a 2 way pump from academy sports. It's made for inflating air mattresses. By 2 way I mean it pushes air when you push and when you pull the handle.
Thanks that saves room
Hi mike. With the raised seats, would that be a problem with using the oars at your current seat height?
I never used the oars after the mod. It will change the dynamics. Depends on what you your intentions are for the boat. If mostly trolling, not a big deal. If mostly rowing, might not work for you. But that depends. Are you using oars to direct down river, and troll on larger portions? It is really a matter of comfort verses efficiency. I used the boat on lakes only. Rowing was arduous at best in good conditions. It's really designed to float down a river. God forbid you get a headwind and no current.
Got it. I use my oars quite a bit so I probably need to use low. I wanted to upgrade my seat from the padded plastic but wasn't sure my options. I read the boat seats like yours hold water hence why I was interested in raising the seat. I guess back to the drawing board. I've looked on the forums and KZread but not much info on seat upgrades and the few all have raised seats.
hey mike where can i get the trolling motor upgrades and where can i buy direct
I just went to Academy. Honestly, I'm disappointed with the connector I used. Advise looking for a 2 pin adapter.
Hey Mike! Beautiful rig! I ordered my XT and will arrive in the next few days. I will be adding a trolling motor and front mount. What battery do you recommend? My local pond is Lake Erie and drifting in the bays you can cover some serious distance. I want to be sure that I can get back to the dock :) Thanks in advance!
Congrats! That's a pretty decent sized pond!!! You can buy a battery monitor that lets you know the charge. Get a "Deep Cycle" battery and maintain the charge when stored. Check the reserve capacity and plan your trips accordingly. I think mine was 175 min @ 25 amps. Don't run the troll on max. I usually kept mine on 3 when travelling with a 30lb Minkota. Use the wind to your advantage. Always troll upwind to start if possible. And ALWAYS take your oars just in case. Have Fun!
Hi Mike have you ever seen a xt with a floor/leaning post? is it possible ?.I have followed your motor mount video and it works well.But I must say the steering was quite erratic,I did rotate the head 180 degrees would that be why it is skittish? I have purchased.Bullnose Rudder but have not had time to try it out yet..Any help would be greatly recieved. I would really like to fit a floor and leaning post for Pike fly fishing Cheers an Tightlines
Hello Nigel. The motor should mount and orient just like the video. Does the motor push the boat, or pull the boat towards it? It should push the boat away from it, otherwise steering is ridiculously slow and frustrating. The bow becomes the stern when traveling. With that being said, I would never consider tracking a better quality of this boat. You will greatly improve speed and response by doing it this way, but it takes a little finesse to keep a straight line. Try adjusting the locking cam so the motor requires some pressure to turn it. Make minor steering adjustments when at speed and that should help. I have fished standing by placing my feet on the frame, so a platform may be possible. I thought about it, but didn't wan't to add weight, set-up time... Also, a platform would make entry and exit more difficult. The seat was so comfy, I didn't want to stand! Let me know if this helps. Now go get bit
Hi Mike Thanks for the advise.I turned the motor head 180degs by removing the locating screws.I'm in the US for another 5/6 weeks when I get home I will work it out.As the platform.One of the reasons I thought/think it might help is that with river launching from a built up bank ,It is hard to get in to the toon.And being 280lb 6'1'' and as near as dam it 65 i thought a step on approach would suit me better,also better to cast a fly from.I would see if it was feasible to have it drop on by the way of upturned U shaped brackets.So if launching from a sloping bank i could walk in and the drop the small platform into potion.Thaks for the advice will keep you posted.Cheers and tight lines.PS got bit yesterday 17lb Steelhead plus a8 and 7lb plus lost the biggest of the day on a drift boat on the Wynoochee in WA buzzing!!!!!!!!!!!
Sweet!