Hello, could you please write is it possible to remove the blue logo? Is it painted over/under varnish or is it sticker?
@andrewmurgatroyd921419 күн бұрын
There's a similar saddle by thinkrider which has more flex and comfort as the rear carbon at the end of pressure release is thiner. I weigh 84kg and no problems been riding it a couple of years.
@AdamAdrianNavarro26 күн бұрын
does it flex in the middle to have a "cushion"?
@skyrunneruk28 күн бұрын
Rookie mistakes I'd be more bothered about the cable rubbing the frame..
@therandomguy574227 күн бұрын
@@skyrunneruk I did put a nylon pad in that location.
@GigabyteSound2 ай бұрын
I love the use of props to explain your crash😆
@therandomguy57422 ай бұрын
Thanks!
@lekobiashvili9452 ай бұрын
You have to put the scales on a hard, flat, level surface.
@Silidons912 ай бұрын
Yeah you need to measure those 6 bolts from center to center, not from edge to edge.
@therandomguy57422 ай бұрын
I sent the web page in the description, they gave the actual measurement so if your interested then you can go check it out. I was measuring based on a guesstimation and the rotors fit perfectly.
@Silidons912 ай бұрын
@@therandomguy5742 ahhh gotcha. They looked pretty good. Let us know how they perform!
@___Bebo___2 ай бұрын
I put a narrow wide chainring on my track bike before. It worked ok, but made hella noise cause of the hooked teeth on a normal 1x chain. T.A. Especialities makes some super nice made in France gear cut lathe 7075 Alu chainrings for 25-40 bucks, same quality as the ones people race on. That's my personal choice.
@aidanw72 ай бұрын
Can you link us to the page to buy those brakes?
@therandomguy57422 ай бұрын
www.aliexpress.com/item/10050...
@ricojohnfirmanes60842 ай бұрын
Bro dont use that deckas chainring, its for 1x drivetrains only the ones with no front derailleur. It's tooth profile is a narrow wide one, its designed to effective hold the chain in a 1x set up, it isn't made for shifting bro
@therandomguy57422 ай бұрын
Thank you for making me aware, however I have no issues changing gears with or without load.
@ricojohnfirmanes60842 ай бұрын
@@therandomguy5742 no bruh i see your chain not instantly engaging with the chainring
@therandomguy57422 ай бұрын
@@ricojohnfirmanes6084 I see your point. The store doesn't say you cannot place two together and until I got them in my hands is when I realize that they did not have the chain protector nub between the ring and the crank arm. I've already have ridden with this set up and I might continue for this season. Like I said I did not notice any issues when I was riding with load or without and since you brought this to my attention I will pay closer attention to the shifts. Thank you very much for looking out.
@___Bebo___3 ай бұрын
Bro why are you using a tall narrow wide chainring on a non 1x system? You know the hyperglide tooth profile will give better shifts right?
@therandomguy57423 ай бұрын
Are you talking about my cassette size to my chainring size?
@davidjonathanarias88083 ай бұрын
thankyou very much🙏
@therandomguy57423 ай бұрын
I hope the video helped you out.
@3lfaromeo3 ай бұрын
Just installed the p505 power meter with pes cranks and qed rings.. what a piece of crap, chainrings you can bend with your bare hands, crankarms noticeably twist under load. People need to know... Waste of money!
@therandomguy57423 ай бұрын
That is unfortunate that you have to go through that. I would return them. I and others haven't had any issues like the few you are describing. Maybe you got a faulty one?
@Panagiotis-Skordilis2 ай бұрын
You are full of bs, i have one from release date and is more accurate and more trustworthy from more expensive craps out there.
@therandomguy57422 ай бұрын
@@Panagiotis-Skordilis What are you talking about?
@Panagiotis-Skordilis2 ай бұрын
@@therandomguy5742I answer to the troll
@davidjonathanarias88083 ай бұрын
hey! can you make a video showing the shifting performance of 105 front derailleur on deckas chainring? would highly appreciate it
@therandomguy57423 ай бұрын
I can. I have ultegra derailuers.
@MFQuinnCyclist3 ай бұрын
I have 5 of these. I love the saddle. I use them on the road
@travispyle29053 ай бұрын
look forward to the update
@Silidons913 ай бұрын
It looks like the one VeloBuild sells. I think it's the same exact one. SD-003
@therandomguy57423 ай бұрын
It does, however the velo sd-003 has more padding.
@therandomguy57423 ай бұрын
Plus its chinse and a lot of things on aliexpress are copyies.
@bossebo35353 ай бұрын
What is the bolt dimension? I see you got a titanium one?
@therandomguy57423 ай бұрын
My bolt pattern for the crank, fits shimano,. You can also buy their chainring set. My bolts that I have on my crankset are 10.5mm to 14mm www.aliexpress.com/item/1005004686041108.html?spm=a2g0o.order_list.order_list_main.142.3e901802T6Bhzi I hope I answered your question.
@bossebo35353 ай бұрын
@@therandomguy5742 I was thinking of the left crank arm fixing bolt 😁 which dimensions is that?
@therandomguy57423 ай бұрын
@@bossebo3535 I'm not sure what your asking.. Do you mean the left are without the chainring? You can buy the crank without the power meter, or you can just buy just the power meter. I use 170mm.
@bossebo35353 ай бұрын
Yes the left crank arm. Your bolt doesn't look like mine?
@therandomguy57423 ай бұрын
I think you mean the right crank arm. The pattern fits shimano. 4-Bolt 110BCD Configuration.
@Silidons913 ай бұрын
I've been eyeing this power meter. I recently purchased a Carbonda CFR696, I kind of want to go all-out Chinese on it. Entire bike from Chinese manufacturers. I bought a Magene C206 super cheap computer, and it works pretty damn good for $30!
@bossebo35353 ай бұрын
Do it totally worth it. Mine has been working flawlessly for almost a year. Just remember to calibrate it every month or so. It's super simple, in their magene app. Only annoying thing is you have to use their app, and create an account. Mine was 100 grams more than stock 105 r7000 crankset Install from 105 crankset, was just the chainrings swap and thats it. I did have to index the FD a little bit on the high limit, to not rub.
@therandomguy57423 ай бұрын
Why pay more when you can get the same quality for cheaper. That is why I have this channel to help others to achieve having a nice bike for less😇
@whynotride3273 ай бұрын
Do it, I have two of them and could not be happier with my choice.
@therandomguy57423 ай бұрын
@@whynotride327 I love my Cadence/ power meter. I also use Magene sensor for my speed. I'll do a video on magene senor.
@matthias-L3 ай бұрын
Hello, I have a Winspace T1515 frame with chainstay brakes at the bottom of the frame. Can these brakes also be installed there?
@therandomguy57423 ай бұрын
I would assume so and long as connecting points fit. With these brakes you have (direct) which I have and (standard) which has one bolt top center.
@matthias-L3 ай бұрын
@@therandomguy5742 yes thanks, I need direct mount with 2 screws. You show how to adjust the brake shoes closer or further away. Can you also adjust individually if a brake shoe is closer or further away from the rim?
@therandomguy57423 ай бұрын
@@matthias-L Good afternoon. The cable tension can adjust the width or how wide you want the brakes to open. Tight for a 23mm rim looser for a 28mm. The sliver adjust will fine tune the brakes how you like them.
@AnyTutorials3 ай бұрын
That's is a quick release feature that exist on the original ee brakes too.
@Jct4214 ай бұрын
Any rides on it yet? Considering buying one and I'm wondering how comfortable it is.
@therandomguy57424 ай бұрын
I did about 50km and nothing more with the seat due to crappy weather kill joying my happiness. So the opening of the pads are L 7 1/4 and W 1 1/4 at the widest part. The 50km I did use the seat, I enjoyed riding with it. The padding feels nice and I did not get any penis numbing or any cheek soreness. The seat is cheap for what the quality is and this is a seat I would by again. Besides that, the seat is beautiful.
@andyt69914 ай бұрын
SS or GS cage?
@therandomguy57424 ай бұрын
I don't understand your question. What is SS or GS?
@andyt69914 ай бұрын
@@therandomguy5742 the cage length from pulley fixing bolts. SS is short cage length. GS is medium cage length
@therandomguy57424 ай бұрын
@@andyt6991 I added the link so you can take a look at the item.
@andyt69914 ай бұрын
@@therandomguy5742ok. Thanks
@therandomguy57424 ай бұрын
@@andyt6991 I checked to see if I can find the pully is either SS or GS. The one I have fits the ULTEGRA which is medium I would think. I hope that helps you.
@Silidons914 ай бұрын
About 70% of your braking is done with the front wheel so that’s probably why it’s like that. I’m sure it has zero effect on the braking performance. I’m debating between a set of super teams or elites for my next wheelset
@therandomguy57424 ай бұрын
elites are nice as well. The nice thing about Chinese carbon wheel set is that you can get cool unique patterns. The fake ee brakes are awesome, they have good power braking. I can just sit and skid out my back wheel with little effort.
@rolandovera59354 ай бұрын
I’ve had a few sets of “Chinese carbon” wheels and the Achilles heel has always been the hubs. But if you invest in a good set of hubs like the ones in video the rims have proven to be excellent in my experience.
@therandomguy57424 ай бұрын
The hubs I have with these wheels are DT350 swiss. I'm pleased with these wheels and hubs and I would buy superteam again.
@QoraxAudio4 ай бұрын
Meh few thousand isn't that much, should last a tenfold. I have some cheap alloy OEM rims (Mach1) for about 8 years now and put at least 8500km each year on them. Just make sure to pack the hub bearings with fresh grease every 2 or 3 years.
@therandomguy57424 ай бұрын
That's cool, however this video is for people who are looking into carbon wheelset. I agree that a few thousand km is not much, however it is still something for people to go by on. I read a review on superteam carbon wheels last over 15000km and all that person had to do was replace the bearings.😏
@QoraxAudio4 ай бұрын
@@therandomguy5742Is lifespan for carbon rims typically shorter than alloy ones?
@therandomguy57424 ай бұрын
@@QoraxAudio Of course alloy wheels last longer then carbon. Again, this video was a review for people who are interested in carbon wheels, not alloys.
@QoraxAudio4 ай бұрын
@@therandomguy5742Ah okay I didn't know that, I thought that carbon was more high-tech so it would last longer...
@therandomguy57424 ай бұрын
@@QoraxAudio Are you trolling? Metal versus epoxy glue and fabric... Either way, I love my carbon wheels and I will at some point will have to replace my currant set for a new carbon set, that is just our reality for carbon lovers.
@lovenottheworld57235 ай бұрын
And call upon me in the day of trouble: I will deliver thee, and thou shalt glorify me.
@pierrerenault52105 ай бұрын
Hi, Hows the durability, is it still ok after 3 months of riding ? Thanks
@therandomguy57425 ай бұрын
I haven't ridden with it yet. Since the date I purchase and received the RD-01, it is still our winter season. I can say I have purchase OG-EVKIN items and they are good quality.
@Bicycle7895 ай бұрын
Quality looks very good. Thanks for this video.
@therandomguy57425 ай бұрын
I do believe that this item will last and maybe help with saving watts. Either half way or at the end of this summer I will do another video on what I think of OG-EVKIN RD-01.You can't go wrong with $50 for a good quality item, instead of $300 item that does the same thing.
@TheSpuxtm5 ай бұрын
just installed the same brake and you are right, stupidly strong brake... better than my stock tektro...
@therandomguy57425 ай бұрын
What do you think, the black frame is titanium? What does your brakes weight, same as mine?
@TheSpuxtm3 ай бұрын
@@therandomguy5742 93grams rear and 105grams front... mine is standard single-mount and still strong brakes...
@larrygross12482 ай бұрын
Strongest rim brakes I've ever encountered were from Magura. They actually make hydraulic rim brakes (yes, no cables at all), which have amazing stopping power. I use them on a tandem.
@Bicycle7895 ай бұрын
Hello. Can you tell me what type off garings are inside? Are they seallet? Or its just regular aliexpress ceramic barings? Thx
@therandomguy57425 ай бұрын
Sorry for the late response. I have not taken the bearing apart, however they are ceramic. I will do an up date with this unit when I get a chance to ride with it.
@Bicycle7895 ай бұрын
Ok thanks.
@therandomguy57425 ай бұрын
When I have time, hopefully in a week or so, I will do a video and open up the pulley wheel and see what's inside@@Bicycle789
@bossebo35355 ай бұрын
I have this saddle version in 3d weave, and it's awesome. Super solid ridden it on my mtb, no problem. I have 3 other saddles from ryet and they're all great, expect the premium version, that one came with wrong aligned rails. However they sent me a new as warranty, but I had to pay Shipping...
@therandomguy57425 ай бұрын
That is good to hear about ryet quality. This is my first purchase from them and I put the seat on my summer bike, so when spring comes I'll get to experience it for myself.
@nastyspray6 ай бұрын
I did the exact thing today but I don’t have a front brake. My bike is fixed so I was just along for the ride.Thankfully there was ah long runoff so I had time to stop.
@joebriggs84226 ай бұрын
Old school action that could save your life in case of brake failure...put friction pressure on the rear tire with the heel/side of your shoe, using the seat tube as a stabilizing fulcrum against the side of your shoe.
@therandomguy57425 ай бұрын
Just remember back then, we had running shoes, now with have clips with plastic, it might not be as affective. However, you have to do what you have to do.
@larsnordin72934 ай бұрын
I bought a pair of eebrakes myself from Aliexpress a couple of years ago for my ttbike, i love them and the brakepower is good enough and it cost me 90$ ❤
@therandomguy57424 ай бұрын
@@larsnordin7293 You did better then me. I paid $160 for mine. inflation i guess lol. Very good brakes and if I need another pair I would buy these again.
@johnsmithers2847 ай бұрын
just got mine in
@ControlAltGar7 ай бұрын
this is scary
@bossebo35357 ай бұрын
Just gotta say I really appriciate showcasing these ali products with videos, and the long term!
@bossebo35357 ай бұрын
Btw how is the stopping power compared to a shimano rim brake?
@therandomguy57425 ай бұрын
Thank you! I just believe that cycle equipment is so expensive and it is also made in china, why not skip the middle man and go straight for the source at a big save...
@4791_7 ай бұрын
What is the brand of the brakes?
@o0darkart0o7 ай бұрын
Nice bike, thanks for posting, contemplating a chinese bike to replace my trek
@cornelhughes6763 Жыл бұрын
How's it ride ? How long after you ordered it, did you get it? How does it compare to other bikes you have owned?
@therandomguy5742 Жыл бұрын
I'll be doing another video shortly. I have ridden the bike so far for 600km to 700km. I'll be talking about the rims, the fake ee brakes and the frame with the computer mount.
Пікірлер
Build a 1x bike. They are phenomenal as a 1x
and the ryet
Is this compatible with R7170 di2 12s long cage?
Hello, could you please write is it possible to remove the blue logo? Is it painted over/under varnish or is it sticker?
There's a similar saddle by thinkrider which has more flex and comfort as the rear carbon at the end of pressure release is thiner. I weigh 84kg and no problems been riding it a couple of years.
does it flex in the middle to have a "cushion"?
Rookie mistakes I'd be more bothered about the cable rubbing the frame..
@@skyrunneruk I did put a nylon pad in that location.
I love the use of props to explain your crash😆
Thanks!
You have to put the scales on a hard, flat, level surface.
Yeah you need to measure those 6 bolts from center to center, not from edge to edge.
I sent the web page in the description, they gave the actual measurement so if your interested then you can go check it out. I was measuring based on a guesstimation and the rotors fit perfectly.
@@therandomguy5742 ahhh gotcha. They looked pretty good. Let us know how they perform!
I put a narrow wide chainring on my track bike before. It worked ok, but made hella noise cause of the hooked teeth on a normal 1x chain. T.A. Especialities makes some super nice made in France gear cut lathe 7075 Alu chainrings for 25-40 bucks, same quality as the ones people race on. That's my personal choice.
Can you link us to the page to buy those brakes?
www.aliexpress.com/item/10050...
Bro dont use that deckas chainring, its for 1x drivetrains only the ones with no front derailleur. It's tooth profile is a narrow wide one, its designed to effective hold the chain in a 1x set up, it isn't made for shifting bro
Thank you for making me aware, however I have no issues changing gears with or without load.
@@therandomguy5742 no bruh i see your chain not instantly engaging with the chainring
@@ricojohnfirmanes6084 I see your point. The store doesn't say you cannot place two together and until I got them in my hands is when I realize that they did not have the chain protector nub between the ring and the crank arm. I've already have ridden with this set up and I might continue for this season. Like I said I did not notice any issues when I was riding with load or without and since you brought this to my attention I will pay closer attention to the shifts. Thank you very much for looking out.
Bro why are you using a tall narrow wide chainring on a non 1x system? You know the hyperglide tooth profile will give better shifts right?
Are you talking about my cassette size to my chainring size?
thankyou very much🙏
I hope the video helped you out.
Just installed the p505 power meter with pes cranks and qed rings.. what a piece of crap, chainrings you can bend with your bare hands, crankarms noticeably twist under load. People need to know... Waste of money!
That is unfortunate that you have to go through that. I would return them. I and others haven't had any issues like the few you are describing. Maybe you got a faulty one?
You are full of bs, i have one from release date and is more accurate and more trustworthy from more expensive craps out there.
@@Panagiotis-Skordilis What are you talking about?
@@therandomguy5742I answer to the troll
hey! can you make a video showing the shifting performance of 105 front derailleur on deckas chainring? would highly appreciate it
I can. I have ultegra derailuers.
I have 5 of these. I love the saddle. I use them on the road
look forward to the update
It looks like the one VeloBuild sells. I think it's the same exact one. SD-003
It does, however the velo sd-003 has more padding.
Plus its chinse and a lot of things on aliexpress are copyies.
What is the bolt dimension? I see you got a titanium one?
My bolt pattern for the crank, fits shimano,. You can also buy their chainring set. My bolts that I have on my crankset are 10.5mm to 14mm www.aliexpress.com/item/1005004686041108.html?spm=a2g0o.order_list.order_list_main.142.3e901802T6Bhzi I hope I answered your question.
@@therandomguy5742 I was thinking of the left crank arm fixing bolt 😁 which dimensions is that?
@@bossebo3535 I'm not sure what your asking.. Do you mean the left are without the chainring? You can buy the crank without the power meter, or you can just buy just the power meter. I use 170mm.
Yes the left crank arm. Your bolt doesn't look like mine?
I think you mean the right crank arm. The pattern fits shimano. 4-Bolt 110BCD Configuration.
I've been eyeing this power meter. I recently purchased a Carbonda CFR696, I kind of want to go all-out Chinese on it. Entire bike from Chinese manufacturers. I bought a Magene C206 super cheap computer, and it works pretty damn good for $30!
Do it totally worth it. Mine has been working flawlessly for almost a year. Just remember to calibrate it every month or so. It's super simple, in their magene app. Only annoying thing is you have to use their app, and create an account. Mine was 100 grams more than stock 105 r7000 crankset Install from 105 crankset, was just the chainrings swap and thats it. I did have to index the FD a little bit on the high limit, to not rub.
Why pay more when you can get the same quality for cheaper. That is why I have this channel to help others to achieve having a nice bike for less😇
Do it, I have two of them and could not be happier with my choice.
@@whynotride327 I love my Cadence/ power meter. I also use Magene sensor for my speed. I'll do a video on magene senor.
Hello, I have a Winspace T1515 frame with chainstay brakes at the bottom of the frame. Can these brakes also be installed there?
I would assume so and long as connecting points fit. With these brakes you have (direct) which I have and (standard) which has one bolt top center.
@@therandomguy5742 yes thanks, I need direct mount with 2 screws. You show how to adjust the brake shoes closer or further away. Can you also adjust individually if a brake shoe is closer or further away from the rim?
@@matthias-L Good afternoon. The cable tension can adjust the width or how wide you want the brakes to open. Tight for a 23mm rim looser for a 28mm. The sliver adjust will fine tune the brakes how you like them.
That's is a quick release feature that exist on the original ee brakes too.
Any rides on it yet? Considering buying one and I'm wondering how comfortable it is.
I did about 50km and nothing more with the seat due to crappy weather kill joying my happiness. So the opening of the pads are L 7 1/4 and W 1 1/4 at the widest part. The 50km I did use the seat, I enjoyed riding with it. The padding feels nice and I did not get any penis numbing or any cheek soreness. The seat is cheap for what the quality is and this is a seat I would by again. Besides that, the seat is beautiful.
SS or GS cage?
I don't understand your question. What is SS or GS?
@@therandomguy5742 the cage length from pulley fixing bolts. SS is short cage length. GS is medium cage length
@@andyt6991 I added the link so you can take a look at the item.
@@therandomguy5742ok. Thanks
@@andyt6991 I checked to see if I can find the pully is either SS or GS. The one I have fits the ULTEGRA which is medium I would think. I hope that helps you.
About 70% of your braking is done with the front wheel so that’s probably why it’s like that. I’m sure it has zero effect on the braking performance. I’m debating between a set of super teams or elites for my next wheelset
elites are nice as well. The nice thing about Chinese carbon wheel set is that you can get cool unique patterns. The fake ee brakes are awesome, they have good power braking. I can just sit and skid out my back wheel with little effort.
I’ve had a few sets of “Chinese carbon” wheels and the Achilles heel has always been the hubs. But if you invest in a good set of hubs like the ones in video the rims have proven to be excellent in my experience.
The hubs I have with these wheels are DT350 swiss. I'm pleased with these wheels and hubs and I would buy superteam again.
Meh few thousand isn't that much, should last a tenfold. I have some cheap alloy OEM rims (Mach1) for about 8 years now and put at least 8500km each year on them. Just make sure to pack the hub bearings with fresh grease every 2 or 3 years.
That's cool, however this video is for people who are looking into carbon wheelset. I agree that a few thousand km is not much, however it is still something for people to go by on. I read a review on superteam carbon wheels last over 15000km and all that person had to do was replace the bearings.😏
@@therandomguy5742Is lifespan for carbon rims typically shorter than alloy ones?
@@QoraxAudio Of course alloy wheels last longer then carbon. Again, this video was a review for people who are interested in carbon wheels, not alloys.
@@therandomguy5742Ah okay I didn't know that, I thought that carbon was more high-tech so it would last longer...
@@QoraxAudio Are you trolling? Metal versus epoxy glue and fabric... Either way, I love my carbon wheels and I will at some point will have to replace my currant set for a new carbon set, that is just our reality for carbon lovers.
And call upon me in the day of trouble: I will deliver thee, and thou shalt glorify me.
Hi, Hows the durability, is it still ok after 3 months of riding ? Thanks
I haven't ridden with it yet. Since the date I purchase and received the RD-01, it is still our winter season. I can say I have purchase OG-EVKIN items and they are good quality.
Quality looks very good. Thanks for this video.
I do believe that this item will last and maybe help with saving watts. Either half way or at the end of this summer I will do another video on what I think of OG-EVKIN RD-01.You can't go wrong with $50 for a good quality item, instead of $300 item that does the same thing.
just installed the same brake and you are right, stupidly strong brake... better than my stock tektro...
What do you think, the black frame is titanium? What does your brakes weight, same as mine?
@@therandomguy5742 93grams rear and 105grams front... mine is standard single-mount and still strong brakes...
Strongest rim brakes I've ever encountered were from Magura. They actually make hydraulic rim brakes (yes, no cables at all), which have amazing stopping power. I use them on a tandem.
Hello. Can you tell me what type off garings are inside? Are they seallet? Or its just regular aliexpress ceramic barings? Thx
Sorry for the late response. I have not taken the bearing apart, however they are ceramic. I will do an up date with this unit when I get a chance to ride with it.
Ok thanks.
When I have time, hopefully in a week or so, I will do a video and open up the pulley wheel and see what's inside@@Bicycle789
I have this saddle version in 3d weave, and it's awesome. Super solid ridden it on my mtb, no problem. I have 3 other saddles from ryet and they're all great, expect the premium version, that one came with wrong aligned rails. However they sent me a new as warranty, but I had to pay Shipping...
That is good to hear about ryet quality. This is my first purchase from them and I put the seat on my summer bike, so when spring comes I'll get to experience it for myself.
I did the exact thing today but I don’t have a front brake. My bike is fixed so I was just along for the ride.Thankfully there was ah long runoff so I had time to stop.
Old school action that could save your life in case of brake failure...put friction pressure on the rear tire with the heel/side of your shoe, using the seat tube as a stabilizing fulcrum against the side of your shoe.
Just remember back then, we had running shoes, now with have clips with plastic, it might not be as affective. However, you have to do what you have to do.
I bought a pair of eebrakes myself from Aliexpress a couple of years ago for my ttbike, i love them and the brakepower is good enough and it cost me 90$ ❤
@@larsnordin7293 You did better then me. I paid $160 for mine. inflation i guess lol. Very good brakes and if I need another pair I would buy these again.
just got mine in
this is scary
Just gotta say I really appriciate showcasing these ali products with videos, and the long term!
Btw how is the stopping power compared to a shimano rim brake?
Thank you! I just believe that cycle equipment is so expensive and it is also made in china, why not skip the middle man and go straight for the source at a big save...
What is the brand of the brakes?
Nice bike, thanks for posting, contemplating a chinese bike to replace my trek
How's it ride ? How long after you ordered it, did you get it? How does it compare to other bikes you have owned?
I'll be doing another video shortly. I have ridden the bike so far for 600km to 700km. I'll be talking about the rims, the fake ee brakes and the frame with the computer mount.