Пікірлер

• 
  @larryalexander48338 күн бұрын

  👍😀

• 
  @kkutube197211 күн бұрын

  Thanks for your answer on the repair of super slick.

• 
  @mrhomely15 күн бұрын

  Product not available anymore? Not on Amazon either

• 
  @garrydean65447 күн бұрын

  If I remember correctly, that was Tough Tire Gel. We still offer a similar product in our Marine Series called Plastic & Rubber Hydrate.

• 
  @ericdavis332616 күн бұрын

  I wish you were closer to where I’m located. Would love to get mine done.

• 
  @AbelLeba-tb7lg21 күн бұрын

  what type of screw cap does it attach too? howd you find an empty jug that fit? thanks

• 
  @edwardpon906823 күн бұрын

  I bought a 2001 seadoo speedster boat. I am try to make it into a fishing boat

• 
  @russellwolter515327 күн бұрын

  Are you still doing this? I have a need in the near future.

• 
  @garrydean654419 күн бұрын

  Absolutely! Give me a call when you're ready. 813-846-4406

• 
  @tytlyf28 күн бұрын

  You could have 2 sprayers with different mixtures. One for the vehicle section pre-soak, the other bottle to wet the towel instead of the bucket.

• 
  @Offroadfam29 күн бұрын

  What’s the purpose? I’m in Spring Hill. I’m interested!

• 
  @garrydean654419 күн бұрын

  Its like bed liner for boats and skis. Its super slick as the name suggests and keeps the fiberglass from getting damaged.

• 
  @renehopkins7606Ай бұрын

  I have something on my front and back plastic bumpers of my mazda6 my car is white and it looks like mold. Nothing works but a little bleach in water. I don't like using that. It looks to be embedded in the paint . Do you know what this is and how I can get rid of it. I'll send pictures if needed.

• 
  @patrickn3682Ай бұрын

  Did you use an expoxy prime to the acrylic before applying the superslick?

• 
  @garrydean654419 күн бұрын

  Per the manufacturer, Fasco Epoxies, you apply SS2k to the bare fiberglass once you've sanded off the factory finish.

• 
  @Autoshyne79Ай бұрын

  Nice color El Camino

• 
  @brianlewis8722Ай бұрын

  That is ABSOLUTELY BEAUTIFUL!!!!! I'm not a car person, but this just blew me away! Nice work!!

• 
  @westphilly60xblockboyrouseАй бұрын

  Getting me one next week

• 
  @RoolBackL2Ай бұрын

  Insane bro!

• 
  @gregorahler2 ай бұрын

  About how long did you spend on that chameleon?

• 
  @vasireddyvenkatanagasrihar22212 ай бұрын

  VERY WONDER , NICE

• 
  @Hindukushsailing2 ай бұрын

  👍👍🤙🤙

• 
  @genoclark20412 ай бұрын

  Nice work garry , your still after so many years kickn but…

• 
  @mwisch42 ай бұрын

  Wow really cool truck. Looks incredible

• 
  @jr-bo9kj2 ай бұрын

  dumb question but where do you set down your towel when drying the most recently cleaned panel and then spraying down the next panel? just hold it while doing so?

• 
  @rickguerrero-wt8xr2 ай бұрын

  If you were in Texas, I'd drop my car off to you.

• 
  @mrBDeye2 ай бұрын

  Why do other companies advertise their products as “Ceramic Coating” when the main ingredient is silicon dioxide or graphene ?

• 
  @garrydean65442 ай бұрын

  Silicon dioxide is a mineral in quartz. It is a ceramic. So if it has silicon dioxide, it is a ceramic coating. Albeit, si02 is what I consider the basic beotch of ceramics. Its abundant and cheap, which is why most manufacturers use it. We also use Ti02, and Tungsten Carbide as well as a few others in our products.

• 
  @Bark3rd2 ай бұрын

  confused, werent you using the all in one at first? ive got a 242 with black hull and every year its got a line of chalk at the edge of where the boat cover ends. Its a pita, even oven cleaner wouldnt remove the chalk. What should I use? Would prefer a one step process. dont need mirror finish just want the white crap off. send link I'll order

• 
  @garrydean65442 ай бұрын

  If you can send some good pics I can recommend a plan of attack. [email protected]

• 
  @russelld18932 ай бұрын

  What grit sandpaper?

• 
  @garrydean65442 ай бұрын

  I use 40 grit. You have to remove the factory finish completely prior to applying SS2K

• 
  @miggs802 ай бұрын

  I can’t decide between this or the Vitality Shield now

• 
  @miggs802 ай бұрын

  Is this the Elite Master Coat Pro - Hi Res for $165 ? I’m on the website looking at your products and I want to install a ceramic coating soon.

• 
  @omardelgado93372 ай бұрын

  I know its been several years but curious is this something you still doing on the side?

• 
  @AngieD3002 ай бұрын

  This is the solution I needed!! I really wanted a DIY solution bc those other racks are easily $500+. Question, would you have any ideas on how to make this able to connect to the LinQ system? I just got the fasteners to see how I can attach to rack or in this case, a crate. Great video

• 
  @privacyrules2 ай бұрын

  For pad washing, do you use the Lake Country pad washer?

• 
  @garrydean65442 ай бұрын

  I dont use any products from them.

• 
  @joepen19553 ай бұрын

  i been detailing for 50 years great job have to buy your mr hyde and fast 5

• 
  @tombachar25653 ай бұрын

  Great job Gary!

• 
  @ozzstars_cars3 ай бұрын

  Looks great from here.

• 
  @antony10calix23 ай бұрын

  Did it work ?

• 
  @gustavogalindo45434 ай бұрын

  Very good explained and great job. I have a question, the filters are on the back of the fan? So the back of the fan is where is extracting the air out to outside of the shop right?

• 
  @EOB744 ай бұрын

  How is it holding up? Has this setup ended up being durable? Would love a long term review.

• 
  @garrydean65444 ай бұрын

  I sold the truck 2 years ago. I still have everything, but I don't use them anymore.

• 
  @landonme96144 ай бұрын

  How long does it take to dry

• 
  @garrydean65444 ай бұрын

  12 hours

• 
  @bigboyben64 ай бұрын

  Does the bottom get completely sanded? Or just scuffed up

• 
  @garrydean65444 ай бұрын

  Per Fasco Epoxies - they say if there is no sign of any delamination or bubbling, heavy sanding with 40 grit is enough to apply SS2k. If there is any sign of deep scratches, bubbles or delamination at all, the entire substrate must be sanded completely off prior to application. On this particular ski, there were no signs of any issues at all so I sanded deep with 40 grit, cleaned and applied. I offer a 3 year warranty against delamination on all of my work.

• 
  @vwmountainman97014 ай бұрын

  Nice work - I do it a little different - but same end result. Us left handers have our own way of doing things that most don't get !!!

• 
  @LoanExpert4 ай бұрын

  Thanks for this video...have you replaced the lock cylinders on the 80 C3 yet?

• 
  @chris014794 ай бұрын

  Awesome. What type of fans is this? And how many inch it is?

• 
  @maeellis5184 ай бұрын

  Mine is 1986 and I understand about that patina

• 
  @adamhawkins35134 ай бұрын

  i've done super slick on a ski but I have a 2022 fx would like someone else do it.. looks like ur in tampa.

• 
  @ObiSkiTV4 ай бұрын

  Thanks again Garry!! Looks and works awesome!! To those thinking about it, best decision you can make for your PWC!!

• 
  @lancercool19925 ай бұрын

  I was gonna go build something like this then realized my garage door is 17 ft

• 
  @johngreno64645 ай бұрын

  Cant wait to see it available!!

• 
  @Bhamautopros5 ай бұрын

  Where can we get Slick AF?

• 
  @garrydean65445 ай бұрын

  It will be available at DetailJuice.com March 1, 2024.

• 
  @Bhamautopros5 ай бұрын

  @@garrydean6544 sweet would the be a notch above infinite insanity?

• 
  @calypsofishing15165 ай бұрын

  Wow Before and after huge diffence love that for my boat

• 
  @user-tc2qf4qs3m5 ай бұрын

  What brand is that PWC sling?

• 
  @TraumaChaplain5 ай бұрын

  Excellent 👍