Thank you for taking the time to record....love the price comparison.
@soniajauregui17013 ай бұрын
Le quedo excelente
@dalmirocastellano66703 ай бұрын
Cheto
@stampinturtles3 ай бұрын
Cool ideas. I have a ton of fence boards. I need to make frames for my art. Thanks for sharing.
@KenzoAb-we9yf4 ай бұрын
💈💈💈💈💈💈💈💈💈
@RC-go2kl7 ай бұрын
Yea, building the wood shelf is a lot cheaper.
@CynthiaWithLove7 ай бұрын
Where'd you get the base, globe and trim?
@thevendorlife7 ай бұрын
The base I made from scrap lumber, the globe came from Home Depot and the trim is simply plywood that I cut to size, routed a profile and painted gold.
@truckingmilesandmoney80646 ай бұрын
@@thevendorlifewhat type of globe is that?
@thevendorlife6 ай бұрын
It is a 4" globe found in the lighting department at Home Depot.
@GM-xm4hw8 ай бұрын
The temp brace for lifting is genius especially for those of us who work alone. One fail in your video. In the beginning you state the 2x4s are cut down to 6ft for the shelves, yet at the end when you discover the metal shelving unit you state your shelves are longer than the 6ft metal unit. That's actually the same unless you misspoke early on and used the entire 2x4 for the length of your shelves.
@thevendorlife7 ай бұрын
Mine is just a bit taller than the metal one. Every inch matters, right?
@rwwon8 ай бұрын
I built something similar, but without the middle supports but used 5/8" particle board. Have had totes on it for several years and hasn't sagged
@thevendorlife7 ай бұрын
I tend to over-engineer everything expecting a heavier load than I probably need.
@timhalleran35149 ай бұрын
Strong work! I'm guessing your floor is level?
@sinsamootphasavath38309 ай бұрын
I've been watching many similar videos, and some videos have many millions views. I find out that this video is the best.
@thevendorlife9 ай бұрын
Thanks for the awesome compliment!
@SD-zk2te10 ай бұрын
Nice build! Going to make this. Did you use MDF or OSB for the shelves?
@thevendorlife10 ай бұрын
I used MDF. I find it more easier to work with and it looks better.
@SD-zk2te10 ай бұрын
@@thevendorlife thank you!
@MrMarkDavel10 ай бұрын
What type of screws worked best?
@thevendorlife10 ай бұрын
I like the general construction screws with the star pattern driver.
@user-mt9xv9fn5w11 ай бұрын
Awesome!
@johnbrandonlocklear7881 Жыл бұрын
How wide was the shelf and how long was the 2x4s for the shelfs. Is all the 2x4s. 6 feet long
@thevendorlife Жыл бұрын
I cut the plywood in half so the cross pieces are a bit over 2 feet long. The uprights are all 6 feet.
@johnbrandonlocklear7881 Жыл бұрын
@@thevendorlife so how far apart are the cross pieces.
@thevendorlife Жыл бұрын
@@johnbrandonlocklear7881 The horizontal boards are all 8 feet so their spacing would be at 2 feet.
@johnbrandonlocklear7881 Жыл бұрын
@@thevendorlife thanks
@kevinrodrigues1221 Жыл бұрын
What sticky tape did you use mate
@thevendorlife Жыл бұрын
That is generic blue painter's tape.
@djrobbo Жыл бұрын
I'll be forever using that stacking method now!
@rashidali7844 Жыл бұрын
I want barber pole how can I cantact with you
@johnnemaric15772 жыл бұрын
Hi Brady, Very good job AND some very funny little jokes!
@thevendorlife2 жыл бұрын
Hey, thanks!
@azizgha12 жыл бұрын
kzread.info/dash/bejne/iJV2ytVxgJmpm7jP.html
@rattata302 жыл бұрын
Wow wow wow!!
@pradeepbansod33342 жыл бұрын
Nice! What kind of screws do you use (size, leng,h head, material)? Would appreciate that info. Thanks.
@thevendorlife2 жыл бұрын
The screws I use are whatever I have around the shop for projects like this but these are 2 1/2" construction screws that I got at Home Depot. They have a torx head but also come with the drill bit to make it easy.
@pradeepbansod33342 жыл бұрын
@@thevendorlife Thanks!
@RisingPhoenixLb2 жыл бұрын
Can I order one?
@henrycabriles54832 жыл бұрын
Dónde estás ubicado. Para recuperar el plástico de mí Caramelo muchas gracias
@thevendorlife2 жыл бұрын
Texas.
@growsomethinwild2 жыл бұрын
Oh man. I am so glad I found you. I have been wanting to do this with the thousands of pieces of old fence boards just lying around over here.
@thevendorlife2 жыл бұрын
Glad I could help!
@adamdoddy64282 жыл бұрын
its easy to dislike HE DOESNT TELL YOU THE MOST IMPORTANT PART HOW TO MEASURE THE ANGLE FOR TAPING! IVE TRIED THIS NOW 5X AND FAILED POINTLESS VIDEO BUT COOL
@thevendorlife2 жыл бұрын
That wasn't quite the point of the video and you didn't see how many times I had to tape and re-tape the pipe prior to painting. However, I think your idea of doing more of a how-to is awesome. Stay tuned and I will go into detail about how to lay out the tape to paint the barber stripes.
@ParentsandProjects2 жыл бұрын
Nice build. Nothing better then a bunch of extra storage space. Especially when you can build it on a budget. Thx!
@thevendorlife2 жыл бұрын
I've got a couple of new ones coming that are all about storage!
@seanr56122 жыл бұрын
Would you sell one? Just the PVC? I would find the base and globe myself. I'm interested in buying a painted PVC! I have no patience to paint myself.lol.
@thevendorlife2 жыл бұрын
Of course. I have an extra pole already painted. Look in the About section for my contact info.
@elkinjaramillo66322 жыл бұрын
Y como hago para que gire?
@jamesgregory70893 жыл бұрын
So on this pole when you were taping you changed your mind and went with standard color masking tape. I like your double lamp so much I want to make one. I don't have the wood router for the flanges and I'd like to know how you tape up pole for red and blue tape. Even though I watched your video several times and slowed it down I can't figure that taping job you do. I layed down in a 45 ° the first stripe of painters. Is it wrong if I don't end up with an equal amount of stripes? I think on one side it'll be wh/bl/wh. I'm sure your visitors say " Oh, what a nice lamp. Where'd you buy it at "? Hope to hear from you thanks. Jimmy
@thevendorlife3 жыл бұрын
The trick to this is that there are only two stripes. Once the base is painted white, tape off two stripes for blue and red at equal distances. I mark the top to identify where my tape strips start. Also, if you look really close, you will see that my stripes are not quite the same size. Taping off the stripes is the most difficult part. Lastly, I changed tape because my first few attempts didn't work and I ran out of tape so I picked up what was available in the shop.
@ashleynapoli29193 жыл бұрын
Where did you find the brass circle parts? Thank you!!
@thevendorlife3 жыл бұрын
Those are made from wood. A little copper color spray paint makes a huge difference. Brass color would work too.
@davidayala31063 жыл бұрын
Beautifull 😍
@thevendorlife3 жыл бұрын
Thank you! 😊
@gerrybeldachannel3 жыл бұрын
Ohh,its really good i like to do this also For my Barber shop...thank you so much for sharing this idea...
@thevendorlife3 жыл бұрын
You are most welcome
@paulmaldonado7893 жыл бұрын
Nice
@thevendorlife3 жыл бұрын
Thanks
@multikarya66773 жыл бұрын
Nice
@thevendorlife3 жыл бұрын
Thanks
@JunkGal633 жыл бұрын
I was looking for a unique framing technique. This is it and something I can do. Thank you so much!
@thevendorlife3 жыл бұрын
Glad it was helpful!
@deboraharaujo70583 жыл бұрын
Já tentei mais não consegui foi colocar a fita qual o segredo? Responde no português.
@maryantonettenavarro65703 жыл бұрын
I Want A Barber phole
@patmercer85913 жыл бұрын
Any source for that globe on top?
@thevendorlife3 жыл бұрын
That is a standard globe with a 3 inch base. I recently discovered that the 4 inch ones fit even better and are bigger globes. You can find these at Home Depot or Lowes pretty easily assuming you are in the US.
@patmercer85913 жыл бұрын
What's the length of the PVC?
@thevendorlife3 жыл бұрын
30 -36 inches from Home Depot. I use the precut pvc.
@bartutv18083 жыл бұрын
That blue color loves
@pedrobastidas38664 жыл бұрын
Solo pinto...y...se comio todo el procedimiento...???
@claudiasepulveda_4 жыл бұрын
Thank you!!
@thevendorlife4 жыл бұрын
You're welcome!
@sebastianalonsosanchezsant22674 жыл бұрын
Porque no pone otra música? Es muy antigua ajj
@miguelangelo21764 жыл бұрын
excellent
@thevendorlife4 жыл бұрын
Thank you! Cheers!
@nanuna38874 жыл бұрын
buenardo
@realidadenatural74454 жыл бұрын
Muito bom mesmo Parabéns
@yomomsgamer4 жыл бұрын
I did this with the driveshaft of my truck and it looks wild!the 🔴🔵⚪
Пікірлер
Thank you for taking the time to record....love the price comparison.
Le quedo excelente
Cheto
Cool ideas. I have a ton of fence boards. I need to make frames for my art. Thanks for sharing.
💈💈💈💈💈💈💈💈💈
Yea, building the wood shelf is a lot cheaper.
Where'd you get the base, globe and trim?
The base I made from scrap lumber, the globe came from Home Depot and the trim is simply plywood that I cut to size, routed a profile and painted gold.
@@thevendorlifewhat type of globe is that?
It is a 4" globe found in the lighting department at Home Depot.
The temp brace for lifting is genius especially for those of us who work alone. One fail in your video. In the beginning you state the 2x4s are cut down to 6ft for the shelves, yet at the end when you discover the metal shelving unit you state your shelves are longer than the 6ft metal unit. That's actually the same unless you misspoke early on and used the entire 2x4 for the length of your shelves.
Mine is just a bit taller than the metal one. Every inch matters, right?
I built something similar, but without the middle supports but used 5/8" particle board. Have had totes on it for several years and hasn't sagged
I tend to over-engineer everything expecting a heavier load than I probably need.
Strong work! I'm guessing your floor is level?
I've been watching many similar videos, and some videos have many millions views. I find out that this video is the best.
Thanks for the awesome compliment!
Nice build! Going to make this. Did you use MDF or OSB for the shelves?
I used MDF. I find it more easier to work with and it looks better.
@@thevendorlife thank you!
What type of screws worked best?
I like the general construction screws with the star pattern driver.
Awesome!
How wide was the shelf and how long was the 2x4s for the shelfs. Is all the 2x4s. 6 feet long
I cut the plywood in half so the cross pieces are a bit over 2 feet long. The uprights are all 6 feet.
@@thevendorlife so how far apart are the cross pieces.
@@johnbrandonlocklear7881 The horizontal boards are all 8 feet so their spacing would be at 2 feet.
@@thevendorlife thanks
What sticky tape did you use mate
That is generic blue painter's tape.
I'll be forever using that stacking method now!
I want barber pole how can I cantact with you
Hi Brady, Very good job AND some very funny little jokes!
Hey, thanks!
kzread.info/dash/bejne/iJV2ytVxgJmpm7jP.html
Wow wow wow!!
Nice! What kind of screws do you use (size, leng,h head, material)? Would appreciate that info. Thanks.
The screws I use are whatever I have around the shop for projects like this but these are 2 1/2" construction screws that I got at Home Depot. They have a torx head but also come with the drill bit to make it easy.
@@thevendorlife Thanks!
Can I order one?
Dónde estás ubicado. Para recuperar el plástico de mí Caramelo muchas gracias
Texas.
Oh man. I am so glad I found you. I have been wanting to do this with the thousands of pieces of old fence boards just lying around over here.
Glad I could help!
its easy to dislike HE DOESNT TELL YOU THE MOST IMPORTANT PART HOW TO MEASURE THE ANGLE FOR TAPING! IVE TRIED THIS NOW 5X AND FAILED POINTLESS VIDEO BUT COOL
That wasn't quite the point of the video and you didn't see how many times I had to tape and re-tape the pipe prior to painting. However, I think your idea of doing more of a how-to is awesome. Stay tuned and I will go into detail about how to lay out the tape to paint the barber stripes.
Nice build. Nothing better then a bunch of extra storage space. Especially when you can build it on a budget. Thx!
I've got a couple of new ones coming that are all about storage!
Would you sell one? Just the PVC? I would find the base and globe myself. I'm interested in buying a painted PVC! I have no patience to paint myself.lol.
Of course. I have an extra pole already painted. Look in the About section for my contact info.
Y como hago para que gire?
So on this pole when you were taping you changed your mind and went with standard color masking tape. I like your double lamp so much I want to make one. I don't have the wood router for the flanges and I'd like to know how you tape up pole for red and blue tape. Even though I watched your video several times and slowed it down I can't figure that taping job you do. I layed down in a 45 ° the first stripe of painters. Is it wrong if I don't end up with an equal amount of stripes? I think on one side it'll be wh/bl/wh. I'm sure your visitors say " Oh, what a nice lamp. Where'd you buy it at "? Hope to hear from you thanks. Jimmy
The trick to this is that there are only two stripes. Once the base is painted white, tape off two stripes for blue and red at equal distances. I mark the top to identify where my tape strips start. Also, if you look really close, you will see that my stripes are not quite the same size. Taping off the stripes is the most difficult part. Lastly, I changed tape because my first few attempts didn't work and I ran out of tape so I picked up what was available in the shop.
Where did you find the brass circle parts? Thank you!!
Those are made from wood. A little copper color spray paint makes a huge difference. Brass color would work too.
Beautifull 😍
Thank you! 😊
Ohh,its really good i like to do this also For my Barber shop...thank you so much for sharing this idea...
You are most welcome
Nice
Thanks
Nice
Thanks
I was looking for a unique framing technique. This is it and something I can do. Thank you so much!
Glad it was helpful!
Já tentei mais não consegui foi colocar a fita qual o segredo? Responde no português.
I Want A Barber phole
Any source for that globe on top?
That is a standard globe with a 3 inch base. I recently discovered that the 4 inch ones fit even better and are bigger globes. You can find these at Home Depot or Lowes pretty easily assuming you are in the US.
What's the length of the PVC?
30 -36 inches from Home Depot. I use the precut pvc.
That blue color loves
Solo pinto...y...se comio todo el procedimiento...???
Thank you!!
You're welcome!
Porque no pone otra música? Es muy antigua ajj
excellent
Thank you! Cheers!
buenardo
Muito bom mesmo Parabéns
I did this with the driveshaft of my truck and it looks wild!the 🔴🔵⚪
💈💈💈💈💈💈💈💈💈💈💈💈
Mampirr
best