If your going to show how to install Cove base at least apply the right amount of adhesive
@19jody722 күн бұрын
Thanks for your concern..been doing this 33+ years. It will be ok.
@50buttfish11 күн бұрын
And, that's all the further I can go - 20 gals/second.
@chillnephewgothisvapetakenawy14 күн бұрын
Man can’t wait to get mine..awesome truck!
@87ricerАй бұрын
Sliiiiiiiiiick ride Brotherman
@19jody7227 күн бұрын
Thanks bro.. my first new vehicle ever of mine own. Wife always got the new stuff...lol
@87ricerАй бұрын
I was there in November every time i visit the theme song My Heart Will Go On plays for a few weeks afterwards 😊
@19jody72Ай бұрын
I highly recommend it to everyone if they can go check it out
@87ricerАй бұрын
Barge's are awesome to see coming and going
@19jody72Ай бұрын
@@87ricer I grew up on the Mississippi River.. brings back good memories
@87ricerАй бұрын
Krazy 😮
@19jody72Ай бұрын
Yes sir... lol
@vettebecker1Ай бұрын
Yes please ❤❤❤❤
@19jody72Ай бұрын
Thanks for stopping by..👊🏻
@philliplewis3754Ай бұрын
I've been to IHBA events at Firebird Lake AZ❤ and Puddingstone Lake CA. Great times!
@19jody72Ай бұрын
YES SIR!! Jet boats are a blast!!!
@glennbrymer4065Ай бұрын
100+ octane, go baby Go!
@Hunkerbunker346Ай бұрын
You bastard!.. I think he said go faster.
@19jody72Ай бұрын
🤣🤣
@johnwick-ii6ilАй бұрын
Cavitation....air in the jet, kills engines. that's why most jet boats for sale have new engines.
@MissyD74Ай бұрын
Beautiful❤
@19jody72Ай бұрын
Lot of memories in that river tiwn
@timdowney6721Ай бұрын
IQ of the owners? 1/545.
@19jody72Ай бұрын
No fear
@Wisdom_Eqauls_PowerАй бұрын
Nice truck Jody!
@19jody72Ай бұрын
Thanks bro, I appreciate it! First brand new truck(vehicle period) that I've ever owned personally. The wife always got the new stuff so the kids was safe and secure. I didn't mind it, I got to buy a lot of trucks to work on and sell... lol
@letzgobrandon5007Ай бұрын
Kinda disappointing
@19jody72Ай бұрын
Just testing is all
@AndrewLane-pm2roАй бұрын
Sea-monster.
@MissyD74Ай бұрын
😂😂😂
@1953fordsАй бұрын
That’s a lot of power. You should have at least neck supports 😁
@19jody72Ай бұрын
🤣🤣🤣 👊🏻
@MissyD74Ай бұрын
😂😂😂
@sweetdrahthaar7951Ай бұрын
Might be a pretty nice hull. Putting a jet pump on something like that is it dead giveaway that you’re not to bright.
@19jody72Ай бұрын
It doesn't have a "jet pump" it has a prop.. it's just called a jet boat. Thanks for the comment
@sweetdrahthaar7951Ай бұрын
@@19jody72 Flat bottoms with V drives and a prop do not put out a rooster tail like that.
@19jody72Ай бұрын
@sweetdrahthaar7951 Both of these boats have props..
@gregl424423 күн бұрын
😅youtube expert. Also it's "too"
@sweetdrahthaar795122 күн бұрын
@@gregl4244 Been around boats for 60 years. Was a boat dealer for 20 years. Been over 100 miles an hour on the water. Best friend is a master marine mechanic that builds drag boats. When you’re using voice recognition and don’t feel the need to proofread shit happens. Now go somewhere else and be someone’s grandma.. here’s a project for you: review the WC Fields Café skit. You are the little dog.
@OlBlueshoundАй бұрын
Awesome sound and need a pretty switched on driver to drive them safely too.
@19jody72Ай бұрын
Absolutely!!👊🏻
@revelationakagoldeneagle8045Ай бұрын
I didn't know Bass could swim that fast
@19jody72Ай бұрын
😀🤣👊🏻
@revelationakagoldeneagle8045Ай бұрын
@@19jody72 😂 Something comedian Blake Clark said years ago. Nice boats!
@seaweb11Ай бұрын
It's not a bass boat Wilbur
@revelationakagoldeneagle8045Ай бұрын
@@seaweb11 It's a joke SCOOTER
@zacksrandomprojects9698Ай бұрын
No wonder why all the jet boats I see for sale have blown up engines! With those high RPMs it sounds like it should be going twice that fast. 😂 They sound amazing. Definitely on my 'want' list. 🍻
@MissyD74Ай бұрын
Cool!
@19jody72Ай бұрын
Helps out big time.. especially if you have both hands full of something and can't hold the tailgate to keep it from slamming down..lol
@MissyD74Ай бұрын
Heck yeah
@MexicantoursАй бұрын
Haven’t had real adrenaline untill you go sailing around the world. These little toys that stay close to land are pathetic.
@19jody72Ай бұрын
Different adrenaline..but I get what you're saying
@mikehd3904Ай бұрын
Different toys for Different boys wtf!
@19jody72Ай бұрын
@@mikehd3904 That!
@nunyabizznizz7326Ай бұрын
southwind tunnel...
@blackrhino34422 ай бұрын
Love that sound.
@19jody722 ай бұрын
Yes sir!!, no other sound like it!! appreciate you stopping by. 👊🏻
@1953fords2 ай бұрын
Very cool. I seen the exhibit that travels around when it came to CT a couple years back. Very moving 👍🏼
@19jody722 ай бұрын
Yeah bro.. it was actually worth taking the little tour. Some of the original things that were on the Titanic were there
@1953fords2 ай бұрын
@@19jody72 yea same I seen and they had a replica 3rd class room
@MissyD742 ай бұрын
Cool. I would like to see that!
@Lxmustang8054 ай бұрын
You have a new subscriber 🤘🏼
@19jody724 ай бұрын
Appreciate it bro..👊🏻
@boosteddave46034 ай бұрын
Congrats brother 🙌
@19jody724 ай бұрын
Appreciate it bro.. can't wait to get the whipple on it.. probably be sooner than later..🤣👊🏻
@boosteddave46034 ай бұрын
@@19jody72 she will. Make some steam lol
@19jody724 ай бұрын
@@boosteddave4603 yes sir! I'll just keep it on pump gas tune with the whipple, I . Don't want to break things just yet.. cost to damn much! 😳 EDIT: 585 RWHP ON 93 and 645 on corn. Stock everything else
@MissyD744 ай бұрын
That sound....❤
@MissyD744 ай бұрын
Beautiful. Looks a little different since I've been there!
@19jody724 ай бұрын
Yeah.. it definitely has changed over the years sis
@choppermike33294 ай бұрын
Thought I'd check out your channel. Sweet Ranger. I have an old clunker, 93. Its been a good truck, kept stalling and not restarting for a few mins. Lol.
@19jody724 ай бұрын
Hey bro... thanks for stopping by. This was the first one I built and I have to admit, I can't believe how well the 302's fit in these trucks that was never offered with a v8. I've built a lot of v8 s10's over the years, the Rangers are a better build in my opinion.
@choppermike33294 ай бұрын
@@19jody72 Sweet ride. You're welcome. Used to build Mopar muscles in the 70's, 80's. Love V8s. Keep building!
@19jody724 ай бұрын
@@choppermike3329 Oh yeah man, I've had a couple dusters, 1 demon and 3 darts myself. All were v8 cars except one, it had a slant 6 in it. Ran like. Sewing machine. I'm going to keep building stuff, just get so swamped at work sometimes.
@choppermike33294 ай бұрын
@@19jody72 👍🏻💯 Love those A bodies.
@calebnezat84185 ай бұрын
That shifter is destroying your shift forks
@19jody725 ай бұрын
No it's not, it's lighter than the stock steel pro tower shifter.. but appreciate the thought.
@Steviewonderwhy6 ай бұрын
Is this better for pet urine
@19jody726 ай бұрын
Well it's vinyl/rubber, so it definitely will not soak in.
@joeshmoe63668 ай бұрын
Who did the tuning?
@19jody728 ай бұрын
Shop here in Saint Louis..STL mustangs did the base mail order tune.. Then it got retuned in shop in Indiana after I sold it. They are fun little trucks and when done correctly..look like a factory vehicle. Building a 97 f150 with a lighting engine and t56 now. I'll build another ranger in the future
@joeshmoe63668 ай бұрын
Sick!
@radionos851510 ай бұрын
Sounds great! What was the CR with the heads milled?
@19jody7210 ай бұрын
Thanks man!! That Anderson Ford N412 cam is a talker for sure for being a very small cam.With the stock 2000 explorer short block compression ended up at only 9.3 (ish).
@raydigsdetecting11 ай бұрын
That's a beautiful sunset Jody...joined your channel 👍😎
@19jody7211 ай бұрын
Appreciate it Ray!! ☕️👊🏻 We are headed back down in a week.. hopefully that Nox 900 will pay for itself..lol
@raydigsdetecting11 ай бұрын
@19jody72 Nox 900 is a great machine. Just have fun and the treasures will come. Good luck Brother have a blast 👍😎
@19jody7211 ай бұрын
Appreciate it brother. 👊🏻☕️
@1953fords Жыл бұрын
She still kicking 👍🏼
@19jody72 Жыл бұрын
Yeah bro.. somehow I deleted this video.. so I just reloaded it..lol
@1953fords Жыл бұрын
@@19jody72 missing mine bad
@19jody72 Жыл бұрын
@@1953fords same..I ended up.selling this to buy back my old supercharged foxbody.. then that didn't happen ..should have kept the Ranger!.
@1953fords Жыл бұрын
@@19jody72 oh man that sucks. Just have to build another 🤷🏻♂️😁
@19jody72 Жыл бұрын
@@1953fords I am....lmao
@single_cam9199 Жыл бұрын
What header’s did you put on your build, I wonder if they’ll work in my explorer
@19jody72 Жыл бұрын
Torque Monster headers.. IF you can find them.. and yes they were originally made for 96-01 Explorers. But they fit the ranger chassis as if they were made for them as well
@michaelblackmon5010 Жыл бұрын
What lines did you use?
@19jody72 Жыл бұрын
The 1999 mercury mountaineer ac lines. They hooked up to the ranger dryer. Everything under the hood of the mountaineer went into the ranger basically
@breruiz4147 Жыл бұрын
How do you fix the bottom so it doesn't look all curvy but rather uniform and nice
@19jody72 Жыл бұрын
Push it up against the wall and down to the floor. It will form to however the wall is. I forgot to mention that in the video..👍🏻
@breruiz4147 Жыл бұрын
@@19jody72 thank you!
@19jody72 Жыл бұрын
You're welcome.. thanks for asking
@jamesdash1906 Жыл бұрын
I miss my jet boat !!!!!! 😭😭😭😭😭😭
@19jody72 Жыл бұрын
I like watching them, Don't think I'd care to own one. Me and boats just don't mix to well..lol
@vrm86gt Жыл бұрын
that does look relaxing! how is the Mississippi River water level now?
@19jody72 Жыл бұрын
Hey bro.. hope all is well! Well we just had some big time storms come through last couple weeks, tornadoes, hail and lit of rain.. so the rivers are back to normal. Tad high right now but no flooding thank god
@vrm86gt Жыл бұрын
@@19jody72 good to hear!
@paulypoppa3021 Жыл бұрын
Dope I like it bro sounds nasty! 🔥 💪
@19jody72 Жыл бұрын
Appreciate it bro.. just a fun daily driver
@605BOLT Жыл бұрын
Sick haha
@605BOLT Жыл бұрын
That shifter is wild haha
@19jody72 Жыл бұрын
I actually had that made to keep me from blowing the transmission all over the highway powershifting it..lol Just wanted a cruiser and something different ☕️👊🏼
Пікірлер
If your going to show how to install Cove base at least apply the right amount of adhesive
Thanks for your concern..been doing this 33+ years. It will be ok.
And, that's all the further I can go - 20 gals/second.
Man can’t wait to get mine..awesome truck!
Sliiiiiiiiiick ride Brotherman
Thanks bro.. my first new vehicle ever of mine own. Wife always got the new stuff...lol
I was there in November every time i visit the theme song My Heart Will Go On plays for a few weeks afterwards 😊
I highly recommend it to everyone if they can go check it out
Barge's are awesome to see coming and going
@@87ricer I grew up on the Mississippi River.. brings back good memories
Krazy 😮
Yes sir... lol
Yes please ❤❤❤❤
Thanks for stopping by..👊🏻
I've been to IHBA events at Firebird Lake AZ❤ and Puddingstone Lake CA. Great times!
YES SIR!! Jet boats are a blast!!!
100+ octane, go baby Go!
You bastard!.. I think he said go faster.
🤣🤣
Cavitation....air in the jet, kills engines. that's why most jet boats for sale have new engines.
Beautiful❤
Lot of memories in that river tiwn
IQ of the owners? 1/545.
No fear
Nice truck Jody!
Thanks bro, I appreciate it! First brand new truck(vehicle period) that I've ever owned personally. The wife always got the new stuff so the kids was safe and secure. I didn't mind it, I got to buy a lot of trucks to work on and sell... lol
Kinda disappointing
Just testing is all
Sea-monster.
😂😂😂
That’s a lot of power. You should have at least neck supports 😁
🤣🤣🤣 👊🏻
😂😂😂
Might be a pretty nice hull. Putting a jet pump on something like that is it dead giveaway that you’re not to bright.
It doesn't have a "jet pump" it has a prop.. it's just called a jet boat. Thanks for the comment
@@19jody72 Flat bottoms with V drives and a prop do not put out a rooster tail like that.
@sweetdrahthaar7951 Both of these boats have props..
😅youtube expert. Also it's "too"
@@gregl4244 Been around boats for 60 years. Was a boat dealer for 20 years. Been over 100 miles an hour on the water. Best friend is a master marine mechanic that builds drag boats. When you’re using voice recognition and don’t feel the need to proofread shit happens. Now go somewhere else and be someone’s grandma.. here’s a project for you: review the WC Fields Café skit. You are the little dog.
Awesome sound and need a pretty switched on driver to drive them safely too.
Absolutely!!👊🏻
I didn't know Bass could swim that fast
😀🤣👊🏻
@@19jody72 😂 Something comedian Blake Clark said years ago. Nice boats!
It's not a bass boat Wilbur
@@seaweb11 It's a joke SCOOTER
No wonder why all the jet boats I see for sale have blown up engines! With those high RPMs it sounds like it should be going twice that fast. 😂 They sound amazing. Definitely on my 'want' list. 🍻
Cool!
Helps out big time.. especially if you have both hands full of something and can't hold the tailgate to keep it from slamming down..lol
Heck yeah
Haven’t had real adrenaline untill you go sailing around the world. These little toys that stay close to land are pathetic.
Different adrenaline..but I get what you're saying
Different toys for Different boys wtf!
@@mikehd3904 That!
southwind tunnel...
Love that sound.
Yes sir!!, no other sound like it!! appreciate you stopping by. 👊🏻
Very cool. I seen the exhibit that travels around when it came to CT a couple years back. Very moving 👍🏼
Yeah bro.. it was actually worth taking the little tour. Some of the original things that were on the Titanic were there
@@19jody72 yea same I seen and they had a replica 3rd class room
Cool. I would like to see that!
You have a new subscriber 🤘🏼
Appreciate it bro..👊🏻
Congrats brother 🙌
Appreciate it bro.. can't wait to get the whipple on it.. probably be sooner than later..🤣👊🏻
@@19jody72 she will. Make some steam lol
@@boosteddave4603 yes sir! I'll just keep it on pump gas tune with the whipple, I . Don't want to break things just yet.. cost to damn much! 😳 EDIT: 585 RWHP ON 93 and 645 on corn. Stock everything else
That sound....❤
Beautiful. Looks a little different since I've been there!
Yeah.. it definitely has changed over the years sis
Thought I'd check out your channel. Sweet Ranger. I have an old clunker, 93. Its been a good truck, kept stalling and not restarting for a few mins. Lol.
Hey bro... thanks for stopping by. This was the first one I built and I have to admit, I can't believe how well the 302's fit in these trucks that was never offered with a v8. I've built a lot of v8 s10's over the years, the Rangers are a better build in my opinion.
@@19jody72 Sweet ride. You're welcome. Used to build Mopar muscles in the 70's, 80's. Love V8s. Keep building!
@@choppermike3329 Oh yeah man, I've had a couple dusters, 1 demon and 3 darts myself. All were v8 cars except one, it had a slant 6 in it. Ran like. Sewing machine. I'm going to keep building stuff, just get so swamped at work sometimes.
@@19jody72 👍🏻💯 Love those A bodies.
That shifter is destroying your shift forks
No it's not, it's lighter than the stock steel pro tower shifter.. but appreciate the thought.
Is this better for pet urine
Well it's vinyl/rubber, so it definitely will not soak in.
Who did the tuning?
Shop here in Saint Louis..STL mustangs did the base mail order tune.. Then it got retuned in shop in Indiana after I sold it. They are fun little trucks and when done correctly..look like a factory vehicle. Building a 97 f150 with a lighting engine and t56 now. I'll build another ranger in the future
Sick!
Sounds great! What was the CR with the heads milled?
Thanks man!! That Anderson Ford N412 cam is a talker for sure for being a very small cam.With the stock 2000 explorer short block compression ended up at only 9.3 (ish).
That's a beautiful sunset Jody...joined your channel 👍😎
Appreciate it Ray!! ☕️👊🏻 We are headed back down in a week.. hopefully that Nox 900 will pay for itself..lol
@19jody72 Nox 900 is a great machine. Just have fun and the treasures will come. Good luck Brother have a blast 👍😎
Appreciate it brother. 👊🏻☕️
She still kicking 👍🏼
Yeah bro.. somehow I deleted this video.. so I just reloaded it..lol
@@19jody72 missing mine bad
@@1953fords same..I ended up.selling this to buy back my old supercharged foxbody.. then that didn't happen ..should have kept the Ranger!.
@@19jody72 oh man that sucks. Just have to build another 🤷🏻♂️😁
@@1953fords I am....lmao
What header’s did you put on your build, I wonder if they’ll work in my explorer
Torque Monster headers.. IF you can find them.. and yes they were originally made for 96-01 Explorers. But they fit the ranger chassis as if they were made for them as well
What lines did you use?
The 1999 mercury mountaineer ac lines. They hooked up to the ranger dryer. Everything under the hood of the mountaineer went into the ranger basically
How do you fix the bottom so it doesn't look all curvy but rather uniform and nice
Push it up against the wall and down to the floor. It will form to however the wall is. I forgot to mention that in the video..👍🏻
@@19jody72 thank you!
You're welcome.. thanks for asking
I miss my jet boat !!!!!! 😭😭😭😭😭😭
I like watching them, Don't think I'd care to own one. Me and boats just don't mix to well..lol
that does look relaxing! how is the Mississippi River water level now?
Hey bro.. hope all is well! Well we just had some big time storms come through last couple weeks, tornadoes, hail and lit of rain.. so the rivers are back to normal. Tad high right now but no flooding thank god
@@19jody72 good to hear!
Dope I like it bro sounds nasty! 🔥 💪
Appreciate it bro.. just a fun daily driver
Sick haha
That shifter is wild haha
I actually had that made to keep me from blowing the transmission all over the highway powershifting it..lol Just wanted a cruiser and something different ☕️👊🏼