Пікірлер

• 
  @psychicsushizoidКүн бұрын

  Then you heaps for showcasing this feature!

• 
  @NeilSpencerBruce15 сағат бұрын

  Pleasure, glad it was useful!

• 
  @Planet9_music3 күн бұрын

  Is this the same as converting audio to midi using flex pitch data? I'm debating this ezbass vs djinnbass for this input reason tbh

• 
  @NeilSpencerBruce13 сағат бұрын

  Pretty much yes. I have no experience with Djinnbass but you could also use Flex Pitch.

• 
  @HpBeck_Fieldrecordings3 күн бұрын

  Great recordings.Love the stereo field of your recording!!Thanks for the sound journey around the world.I really enjoyed your video.Have a nice week.Best wishes from northern Franconia.New sub👍

• 
  @NeilSpencerBruce13 сағат бұрын

  Thank you so much! They were all recorded with Soundman OKM Classics. Binaural has come my preferred method over all the years, even above ambisonics, due to the ability to get my head into interesting places. All the best from North West England!

• 
  @NinthEye4 күн бұрын

  Is it possible to monitor the midi bass while playing?

• 
  @heyjarrod4 күн бұрын

  I know the video is kinda shot a little upside down and sideways, ha ha. But I wonder why he mounted it upside down. You can see the three mounting screws right there. I guess it really wouldn’t matter, but now the dip switches for the voltages are not accessible. Even though they can probably be accessed between the rails as well. Hmmm.

• 
  @NeilSpencerBruce13 сағат бұрын

  You can access the dip switches from above. It is mounted with velcro as I move boards often.

• 
  @sopranino19698 күн бұрын

  Now bout the timing. MTR without click is hard...how would you do that? As you said...its a bit of mess without

• 
  @IMANKARIEV13 күн бұрын

  Can i record more than 4 ? How to do that?

• 
  @DmitriSkif15 күн бұрын

  Is this FX board as good as GX-100 ? What "flagman" processor it based on? Seems it is not A.I.R.D -based, right?

• 
  @StratShredder6918 күн бұрын

  Hi Spencer. Thanks for this. I’ve been trying to do this with a Nobels ODR-1. I was told it has a momentary jack so to use the PLS or INV control but the pedal will not react. Tried all sorts of cables too. Any advice?

• 
  @NeilSpencerBruce16 күн бұрын

  Hi there, good question. It should work, have you tried a trs jack?

• 
  @StratShredder6916 күн бұрын

  @@NeilSpencerBruce hi Spencer. Unfortunately yes. Still didn’t find a solution for it. Only thing I found that worked was a TRS cable splitting out ot my aux MS3 switch. One into the Nobels and one into the MS3. Couldn’t get the MS3 to do it but that did end up working for now

• 
  @oscarantonmusic28 күн бұрын

  thank you !!

• 
  @NeilSpencerBruce28 күн бұрын

  Pleasure

• 
  @marcelstannard270129 күн бұрын

  Your MS3 video's are so good Bruce! I've come back to these so many times when I've reprogrammed my board! Thanks :)

• 
  @NeilSpencerBruce28 күн бұрын

  Thank you so much, glad to know they are of use! all the best, Neil

• 
  @JeremyKroeker29 күн бұрын

  Tbanks for this. I just went into the studio for the very first time last week to record some original songs. I’m an intermediate player, at best, but I knew my own songs well. Could I record them? Not for love or money. Finally, like you suggested, I pulled out my lyric sheet to follow along and that helped. But, so far, I have recorded a poor representation of what I can do when I’m alone practicing. Back to the studio next weekend to work on more material … and maybe try to fix what I’ve already done. 😬😬😬

• 
  @NeilSpencerBruce28 күн бұрын

  Thanks for your message! You are not alone, the secret is in relaxation, but that is easier said than done! good luck with your next session!

• 
  @benuchodechery5963Ай бұрын

  Thanks for the review, very useful 🙂 Do you have any idea of its weight ? I'm considering buying it to take 2 guitars with me in a plane's cabin, but with the weight of the 2 guitars and the maximum allowed by the company, there's not a huge margin...

• 
  @SAI_VuuАй бұрын

  Hello, I'm wondering if anyone knows how to replace the viewfinder / eyecup piece on the Canon M50.

• 
  @kevmccannАй бұрын

  Great vid and update ! Just building a fly out rig now with pedaltrain classic Jr and cs6 powering the HX Stomp XL. Thanks for sharing. 🙏

• 
  @NeilSpencerBruce28 күн бұрын

  Thank you!

• 
  @jameshesfordАй бұрын

  Thank you. Concise and clear - appreciate that J

• 
  @NeilSpencerBruce28 күн бұрын

  Thanks for watching, glad it was of use!

• 
  @mizmor149Ай бұрын

  Hi. How can i use boss ms3 blend sounds: clean bass and drive sound in bass .thx

• 
  @ikigai47Ай бұрын

  San Dimas baby. Lived there for years, in the Via Verde area. Lovely place. Just got a bluesbucker to put in my Duesenberg. Their P90 is soooo noisy.

• 
  @JonRayRunawayVealMusicАй бұрын

  What speaker is in your BJ and any mods? Sounds excellent

• 
  @NeilSpencerBruceАй бұрын

  It is the stock Jensen that the amp came with, no mods on the amp. Thank you!

• 
  @rolandmollere3Ай бұрын

  Using logic for a class project, this helps immensely!!!!

• 
  @NeilSpencerBruceАй бұрын

  Glad to help

• 
  @wellsmАй бұрын

  What were your recording settings for this?

• 
  @NeilSpencerBruceАй бұрын

  The level was set at around 30-35. I never really go above 40 on the mic level as it starts to introduce noise.

• 
  @BruceHarmsАй бұрын

  I just bought it in 2024 for my home recording, I hate sitting behind a screen and this is awesome!

• 
  @NeilSpencerBruceАй бұрын

  It is always great to escape the screen!! Good luck!

• 
  @BruceHarmsАй бұрын

  @@NeilSpencerBruce Thank you for that!

• 
  @Celticsaint777Ай бұрын

  How do you get audio sender to pop up?

• 
  @NeilSpencerBruceАй бұрын

  You need to make sure that the plugin is installed, it will then appear on your plugins list.

• 
  @davidda3907Ай бұрын

  Hi Neil did you ever your MS-3 with this amp BJ ? Thanks advance

• 
  @NeilSpencerBruceАй бұрын

  Yes I did on many occasions. Thanks for watching.

• 
  @ChrisBird-bi9txАй бұрын

  Pedaltrain must of heard you they now have a zipped pocket on the front

• 
  @NeilSpencerBruceАй бұрын

  Haha I wonder if they did :) Make a lot of sense and is very useful!

• 
  @KaiKaosSongs2 ай бұрын

  Thanks! Exactly what I was looking for 🙂

• 
  @NeilSpencerBruceАй бұрын

  Thank you, glad it was useful!

• 
  @soundsgoodtome2 ай бұрын

  Dear friend, I had a hard time finding this video, because "Scaler" is misspelled in the title. You might get even more views if you correct the spelling of "Scaler." 😊

• 
  @jamesglaubitz35742 ай бұрын

  Is there a way to turn the timeline off when switching patches on the ms3?

• 
  @NeilSpencerBruce2 ай бұрын

  Yu could do this via Midi, and send a CC to bypass the strymon.

• 
  @geoffnicol44812 ай бұрын

  I guess I could control either with the tone controls?

• 
  @geoffnicol44812 ай бұрын

  Hi Bruce, great video. I'm looking at the tweed v back v3. I not keen on bright sounds. Would you say the tweed is brighter than the black 3? I do love a blues sound. Thanks

• 
  @NeilSpencerBruce2 ай бұрын

  Hi there, I haven't had a ton of experience with the Black version, I do think however that the tweed is probably a bit brighter.

• 
  @Charlie-hp2oh2 ай бұрын

  how long can it be left recording ?

• 
  @NeilSpencerBruce2 ай бұрын

  Hi there, basically as long as you have memory space and battery life. I have recorded for over 12 hours with no problems. thanks, Neil

• 
  @Sobsong592 ай бұрын

  I am getting into using my HX Stomp XL, I use a pitch shifter most of the time and play pedal steel through the pedal to great effect. I am looking at power bricks and have tried combining 2 x 500 ports, it doesn’t work, the pedal powers up but the sound breaks up. The power supply I am using is a cheap and cheerful unit that has powered all other pedal combinations with no problem…do you thing a Truetone will handle this? Cheers

• 
  @NeilSpencerBruce2 ай бұрын

  Hi there, you would need to check the total power consumption of all of the pedals that you have running, but on the whole I have found that the TS has provided enough power to run some heavy draw pedals such as the Pod GO and strymon pedals. Thanks, Neil

• 
  @davebarone5062 ай бұрын

  Id love to hear what difference the volume knobs would make in different positions

• 
  @leopoldoinnecco59242 ай бұрын

  Is it possible to use an expression pedal and assign it to control the volume / level of the pedal in loop 1? The idea being using a tubescreamer and the exp pedal to determine how much gain it has. Is that possible?

• 
  @leopoldoinnecco59242 ай бұрын

  Is it possible to use an expression pedal and assign it to control the volume / level of the pedal in loop 1? The idea being using a tubescreamer and the exp pedal to determine how much gain it has. Is that possible?

• 
  @lexlaurence71072 ай бұрын

  Another amazing decoding of the MS-3! I'd seen this done by another KZread performer and was trying to figure out how to use the feature on my own MS-3 - thank you so much for explaining that.

• 
  @NeilSpencerBruceАй бұрын

  Pleasure, thank you for the comment! Enjoy the MS3!

• 
  @robotbarbarian2 ай бұрын

  Thanks for the tip! Does this mean that the actual files within Explorer or Finder (on Mac) are renamed as well?

• 
  @NeilSpencerBruce2 ай бұрын

  No just the regions are renamed. The underlying file name is based on the track name when you first record. You can change these in Logic's file explorer though.

• 
  @kevinobrien96262 ай бұрын

  I have a Jr IV. I do love the tone you are achieving at 12. The question is, how would you toggle into a clean tone for chicken-scratch funk? Can you just cut the volume at your guitar?

• 
  @NeilSpencerBruce2 ай бұрын

  I would as you say reduce the volume of your guitar. Hope that helps!

• 
  @richardsanders22712 ай бұрын

  Great thanks

• 
  @NeilSpencerBruce2 ай бұрын

  Thanks!

• 
  @jagpessoa2 ай бұрын

  Hi! Is there a way to assign the pedal expression to make the delay to self oscilate? Like… heel down - normal tempo, toe down - oscillate… Thank you so much!

• 
  @NeilSpencerBruce2 ай бұрын

  Hi there, I don't see why not. This would be a case of assigning the expression pedal to the feedback and/or delay time of say an analogue or tape echo effect.

• 
  @flipperpitstudio3 ай бұрын

  Short, sweet, needed! 😁👍🙏 Cheers!

• 
  @NeilSpencerBruce2 ай бұрын

  Thank you!

• 
  @amalijakostichangerson99303 ай бұрын

  honestly the best tutorial I've ever watched, thankyou so much!!!

• 
  @NeilSpencerBruce2 ай бұрын

  Thank you so much! Glad it was useful!

• 
  @SandroGachet-uu9jl3 ай бұрын

  excellent channel! Is it possible to call another program instead of just one effect? thanks!

• 
  @NeilSpencerBruce3 ай бұрын

  Thank you for your kind words. I don't think you can call up another patch with a curnnum within that patch. You could call up something on another unit via midi but not internally.

• 
  @rueguy3783 ай бұрын

  This is Great!!! I've been struggling with this problem for a long time and it's fixed! Thank you so much!!!

• 
  @NeilSpencerBruce3 ай бұрын

  Pleasure!

• 
  @alphaqclashes49453 ай бұрын

  DUDE. You are so talented. I just listened to 4 of yours tracks. I think one was off an album you released? Sonder is amazing. PLEASE PLEASE make more Logic tutorials and more music advice. I’d love to see some tutorials on some custom pad patches using stock plugins in logic, or cool spacey or lush soundscape tutorials. It’s such great inspiration and provides some cool ways of doing things with stock logic that I’ve never seen before. Do you have any other logic tutorials? Ones that aren’t in that playlist on your channel?

• 
  @NeilSpencerBruce3 ай бұрын

  Thank you so much, I am glad you found it useful, and thank you for listening to my music. Sonder is from a forthcoming album, coming out early April. That's is great to know. I am sure I can put together some more tutorials if they are useful. The only ones I have are on the playlist, but I am happy to make more. All the best.

• 
  @alphaqclashes49453 ай бұрын

  Ethereal. Love it

• 
  @NeilSpencerBruce3 ай бұрын

  Thanks so much for listening!

• 
  @h85rocks3 ай бұрын

  Wait... as I understand you're not able to move the loops, but is it possible to put fx or mod in between individual loops?

• 
  @NeilSpencerBruce3 ай бұрын

  As in, can you insert an effects pedal? I am not sure I understand the question, sorry.

• 
  @h85rocks3 ай бұрын

  @@NeilSpencerBruce Thanks for the reply, but I found my answer. I now realize you are not able to insert any of the internal mods or fx from the MS3 in between each loop of the MS3. I initially didn't realize the loops are in series and that nothing is able to be inserted between the individual loops. This actually isn't a deal breaker for me though. I will mostly use the loops for drive pedals and wah, and the MS3 will be used primarily for compression at the start of the chain and then mods/fx following the drives. I bought one last night, so my journey with it begins soon.

• 
  @mrm1dn1ght533 ай бұрын

  i have a question. i'm not sure if this is the exact video to ask on, but i'm trying to figure out how to use manual control mode to bypass an effect in an external unit via midi. i have the MS3 paired with a line 6 HX stomp. what i want is to be able to bypass a shimmer reverb on a heavy reverb preset that i have. do i have to use an assign setting or a midi patch setting?

• 
  @NeilSpencerBruce3 ай бұрын

  HI there, this maybe possible depending on the unit you are trying to control, but you will need to look in the midi cc settings of it's manual and look for Bypass. You would then set up an assign on the MS to send out a midi CC change when you click a certain button the the MS3.

• 
  @jobucats21664 ай бұрын

  So once I get to the Legacy instruments, how do I scroll and audition each one without having to start all over with clicking "Option)?

• 
  @helmutguitar4 ай бұрын

  Hello, I really appreciate your detailed videos on the MS-3 which give deep insights missed by the manuals. Maybe it would be nice to have another short video just on the subject of assigning an effect and cross-assigning to Curnum to turn off one effect and turn on another one. It is a very difficult subject and hard to understand, I had to look through all the comments and finally found the solution within your answer to a request. Thanks in advance! Helmut

• 
  @NeilSpencerBruce4 ай бұрын

  Thanks for watching and your kind words. Unfortunately I no longer have the MS3 so I am unable to do any more videos. Sorry about that. All the best, Neil