Пікірлер

• 
  @ryanjofre2 күн бұрын

  With much respect all of your reviews are more like an unboxing and a brief overview!!! I appreciate and respect your personality and I wish you’d go into more depth & detail dude. Godspeed🫡🫡🇺🇸🇺🇸

• 
  @sonixtope8 күн бұрын

  Where can i find those sliders? are compatible with other recaro seats? thx

• 
  @U-TMANVLOG10 күн бұрын

  ❤❤❤

• 
  @adamcuba230112 күн бұрын

  I have the k turned master but with the plastic nipple but you can remove it but with a screw would mine work with this

• 
  @ConnerKF12 күн бұрын

  Subbed

• 
  @caseyryan751315 күн бұрын

  Tou gotta unbolt the new adjustable radius rods to adjust caster?

• 
  @TonyTunesENT26 күн бұрын

  you can literally just shove a flathead into the lock and it wont move anymore.....

• 
  @FL5.IsaiahАй бұрын

  fits fl5 type R?

• 
  @jayman3573Ай бұрын

  I loosen the collar and I still can’t spin the fork. Is there a secret technique to this?

• 
  @mikeballard1607Ай бұрын

  Excellent!! Thanks

• 
  @dieglhixАй бұрын

  want these to replace my squeaking galant 2003 suspensions.. it will look awesome

• 
  @mrscary37212 ай бұрын

  Dood, the KZread channel you got that recipe off of...Ichabod motors (or ?) is a parody video channel. Don't use what they post on there! lol

• 
  @GabrielLopez-fi3tz2 ай бұрын

  I’ve lost a engine due to it getting hydrocked on heavy rain even with oem plastics shield I’d say would be good for like track day or good weather other wise I’d rock it short ram

• 
  @Grenadieros2 ай бұрын

  And the results in performance-torque-gas mileage were ... ?

• 
  @cesariglesias62203 ай бұрын

  i already have coilovers on my car but dont have the oem mount would i have to order a new one or us the one on my coilover

• 
  @user-ux5hr8br9l4 ай бұрын

  Mishimoto leaks and charge $100 shipping for their lifetime warranty. Mine is leaking at 3000 miles. I wont buy again.

• 
  @sf77604 ай бұрын

  I prefer Diesel fuel + washing soap + citric acid Or HF + soap... Man.. hF is serious stuff. Nothing in car, which cannot be cleaned with HF soap cocktails

• 
  @JTrippBeatz5 ай бұрын

  Does this one work with a b18b1

• 
  @ChrisTopHer-yj9kx5 ай бұрын

  Took me two months to complete this. Dropped one of the screws under the shifter 😂. Talk about a pain. Those 7 mm were a cakewalk 😂

• 
  @renergutierrez33565 ай бұрын

  Do you need rear camber kit when using coilovers

• 
  @Tuntua3 ай бұрын

  it’s recommended yes

• 
  @streetjustice42875 ай бұрын

  Your channel name is clickbait lmao I thought it said “mark rober” and I was like “nice since when does he do car stuff?” Haha appreciate the info man

• 
  @uselessghost22326 ай бұрын

  Awesome video thanks dude

• 
  @user-qk1kc3sl6o6 ай бұрын

  B20 black gst

• 
  @Fcpuru956 ай бұрын

  Starts at 2:10

• 
  @taureantrouble65866 ай бұрын

  So if I disconnect the battery I lose my whole tune and have to get it retuned?

• 
  @taureantrouble65866 ай бұрын

  I’ve just come to the issue of a whole bunch of error codes flooding my dash, the car is stuck in sport mode and the passenger windows don’t wind down from the drivers side control

• 
  @Mzinya6 ай бұрын

  You have to reset the windows every time you disconnect the battery. It's easy I don't know about sport mode though.

• 
  @AutoBodyEverything7 ай бұрын

  QUESTION… I’m Still seeing the unbranded master cylinder with no name on it in the full kit from Amazon and eBay! Are there still unbranded parts?? LASTLY, if I buy each of these both the parts separately from links that show that they ARE advertised as branded, will I GET the exact banded items??

• 
  @PiroFyre2 ай бұрын

  They get their master and slave from Exedy/Equal and just slap their branding on it. Then they use their own -3an custom fitting on the end of it, which that rubber seal in these fittings end up failing. I found this out from watching this video and just made my own Ktuned kit for just over $100. Instead of using a rubber seal, I just tapped both master and slave with a 1/8 NPT and used a 1/8 NPT to -3an fitting. Then bought some -3an lines on eBay to finish the build. Never failed on me for over 10k miles but a few friends bought the Ktuned kit had theirs fail within 3k miles. Saved myself so much money since that kit cost over $200 and I spent just over $100 with the 1/8 NPT tap kit. Under $100 on just parts.

• 
  @deadassyo60807 ай бұрын

  Do they make this lip for the 96-98 models?

• 
  @luce-97 ай бұрын

  Pretty sure they do

• 
  @krazyfil7 ай бұрын

  Here we are in 2023, just curious what you paid for this back in trump economy

• 
  @ericiidx7 ай бұрын

  Thanks for bringing up the fact that the ECU defaults back to the factory tune when disconnecting the battery. I'm replacing mine this week and did not think of this (I knew the radio and such would reset, but not the tune!)

• 
  @cusumano917 ай бұрын

  Might wanna check on your dam being 0.5 or 0.6. Ideally it should be at 1.000 and you’ll lose power if not. It essentially pulls timing. If that map you’re running is your pro tune you should contact your tuner

• 
  @traxxasmaxx038 ай бұрын

  I see this video was posted 6 years ago. Just curious how is your car now? How many miles do u have?

• 
  @eddyviera57378 ай бұрын

  Can u use the adapter with another throttle body?

• 
  @NOAHCASAS8 ай бұрын

  NO NEED TO WRITE DOWN THE WIRE NUMBERS ON THE SPARK PLUG WIRE CAUSE THEY IS ONLY 4 LENGTHS IN CABLES AND THEY AND HARD TO MESS THAT UP UNLESS YOU CHANGE THE WIRE DO IT IN ORDER AND ONE AT A TIME PLUS "NEVER TOUCH AND HOLD NEW PLUS BARE HANDS" YOU DON'T WANT THE OILS OF YOUR HANDS TOUCHING (THE WHITE PORCELAIN PART OF A SPARK PLUG) COULD CAUSE PREMATURE FAILURE TO A PLUG PLUS N.G.K. PRE·GAPPS ALL THEIR PLUGS TO SIZE AND MODELS SO NO NEED TO ADJUST OR ADD ANIT·SEIZE THE THREADS COME WITH ANIT·SEIZE COATING ALREADY TO GO BY FACTORY JUST A FEW TIPS KEEP THE MAINTENANCE UP MAN ✌🏼OUT

• 
  @vixxenn87509 ай бұрын

  Will this fit 2017 mustang?

• 
  @charrette2021-pf7gc9 ай бұрын

  Whats the distance between the bolt bolts of the inner mounting plates?

• 
  @jordanpack55719 ай бұрын

  Sitting in an airport parking lot, waiting for a friend to arrive. Using this to keep an eye on the lot behind me :D

• 
  @sledbomb9 ай бұрын

  I have a hard time taking advice from a guy that can't even pronounce the word spanner correctly.

• 
  @koookykevin9 ай бұрын

  Can I know where to buy this

• 
  @ohxietviet10 ай бұрын

  Appreciate the video! Explained a lot. I'm curious now the differences between the revision 2 and original boxes.

• 
  @Visually_Verified10 ай бұрын

  What size are the center caps ?!

• 
  @jojojonathan206811 ай бұрын

  Ya think it would look gud on a Honda civic 2012 😁?

• 
  @na2slo11 ай бұрын

  Got one for my Miata

• 
  @Mylotheblacknwhitecat11 ай бұрын

  Can I use this without hempseed oil?

• 
  @Minute419 Жыл бұрын

  You talk too much, 2 minutes in and finally you start actually doing work.

• 
  @terpsman184 Жыл бұрын

  Stop moaning you 🐈

• 
  @Fares23clips Жыл бұрын

  Guys i missed with default preload how to go to default preload settings

• 
  @apbtofrn8237 Жыл бұрын

  Thank you

• 
  @CALLIN799 Жыл бұрын

  Thank you

• 
  @datway._luis Жыл бұрын

  got these for my ‘02 Acura TL Type S and i get a stiff but also extremely bouncy ride. like it bounces bad and bounces less and less until it doesnt. why could that be?

• 
  @shaktisvaran7491 Жыл бұрын

  What size is the plug socket?

• 
  @Ieatzboltz Жыл бұрын

  Cut straight to it idiot