Пікірлер

• 
  @Tolistepper17 сағат бұрын

  криворукий что то там сломал, что бы впихнуть рекламу, а виноваты creality.

• 
  @TheRainHarvesterКүн бұрын

  Is there a coin cell for the clock? Mine always has incorrect time upon power-on.

• 
  @aim6mac9 сағат бұрын

  I don't remember seeing one in there, it shoudln't lose it's time , do you disconnect it from the mains ?

• 
  @TheRainHarvester5 сағат бұрын

  @@aim6mac sometimes i unplug. But even when i just use the on/off button it resets the time.

• 
  @aim6mac12 минут бұрын

  @@TheRainHarvester not sure if mine did that to be honest, i'll ask around

• 
  @avgear26942 күн бұрын

  Does it work on latest firmware?

• 
  @AyrtonRicardo5 күн бұрын

  Which model have you printed to have Rapido UHF running? Does the default stealthburner stl works?

• 
  @user-rm3gf8xi6f5 күн бұрын

  What should speed be

• 
  @dutchieq30596 күн бұрын

  Why is this litterbox sold under so many different brandnames? Petlux, Zedar and so many more names are on this litterbox. It makes me feel not so sure about getting it.

• 
  @aim6mac6 күн бұрын

  in all honesty I don't know, BUT what I do know is that this happens to many products from China, they get sold under many names. I think it's called rebranding.

• 
  @Baobab018 күн бұрын

  That WAS Ender but now it’s too much modified to call it so.

• 
  @Marc_Hobby-Foto9 күн бұрын

  interessante tips gezien, maar gaan de stickers niet verschijnen door de warmte? of is dat speciale stift?

• 
  @Murat_Y.9 күн бұрын

  ❤

• 
  @tbkowens9 күн бұрын

  always happy to see some aim6 content

• 
  @E-dart13 күн бұрын

  Where did you get it from, i can only find it with the whole extruder

• 
  @aim6mac12 күн бұрын

  i got it from Aliexpress, not sure if it's still available though...

• 
  @bcboaventura13 күн бұрын

  i need send save_config command after shaper calibration?

• 
  @aim6mac13 күн бұрын

  yes indeed, or it won't save it

• 
  @davidsearle922814 күн бұрын

  Great video, I'm new to printing and learning fast, I have the ender 3 v2 neo, how did you access level menu, with the ready + - readings. Plus do you have the link for the wheels. Thank you

• 
  @aim6mac14 күн бұрын

  hi, you need to install MRiscoc firmware.

• 
  @davidsearle922814 күн бұрын

  @@aim6mac thank you, I will look that up.

• 
  @bmproyectosdearquitecturae787619 күн бұрын

  Amigo tengo la misma impresora con la misma actualización y tengo una consulta, la configuración en probe x:-31.8 y:40.5 y funciona perfecto, pero ahora le instale el eje lineal en X sale un poco más y esas coordenadas ya no me da, le he sumado y restado la posicion en Y pero no logro entender como ajustarlo, quizás me puedas dar una idea?, gracias

• 
  @FullofWonderChannel22 күн бұрын

  Thank you for this video

• 
  @GrahamDyer23 күн бұрын

  Would the K1C benefit from this?

• 
  @aim6mac23 күн бұрын

  yes since it's the same base printer.

• 
  @10Rey0124 күн бұрын

  @12:04 wait a minute, either i'm having a brain lag or i'm forgetting a simple method...how did you manage to get the "children's pictures" to have the colors from the ams? surely you're not painting every stroke manually with the color painting fill tool, are you? i only know color lithophane and hueforge for these colors? what part am i missing to understand how you assigned the colors? also, nice video, have my sub

• 
  @aim6mac23 күн бұрын

  oh i just made that in bambu slicer honestly , i just needed it to be able to print in 8 colors :)

• 
  @10Rey0123 күн бұрын

  @@aim6mac yeah but as far as i know, you cant just import an picture into bambu slicer and have the colors, no? so you had to prepare it in some way.

• 
  @aim6mac23 күн бұрын

  @@10Rey01 well u just load the model first, then u choose the paint tool, and then choose the 'circle' option and then choose the color you want to paint in and then just paint as you like really, u don't need to do pre preparation before all this.

• 
  @olivierplayer163325 күн бұрын

  can you put this fan directly on apu and test temps ?

• 
  @kanrogcreationsАй бұрын

  I've had one of these for a few weeks now and it's amazing! Perfect for a small apartment. My cats are happy 🥰

• 
  @aim6macАй бұрын

  i'm glad to hear that :)

• 
  @tre2wavy845Ай бұрын

  This the most stressful purchase ever

• 
  @aim6macАй бұрын

  sorry to hear that , didn't the video help you out?

• 
  @kristophersalvail9615Ай бұрын

  Hi ! Is your temperature for your hotend rise to 300 degres ?

• 
  @aim6macАй бұрын

  yes, but in order to do that u need to install Mriscoc 'latest' FW

• 
  @kristophersalvail9615Ай бұрын

  @@aim6mac i have it already, but the higher it go is 285 degres

• 
  @michaelhincheyАй бұрын

  If power goes out , does the water stay in the bowl?

• 
  @aim6macАй бұрын

  yes it does

• 
  @yy502Ай бұрын

  Great review & demo! 👏

• 
  @97JoMillerАй бұрын

  Do you just do this once or do we have to run both macros every time I power on the printer?

• 
  @aim6macАй бұрын

  once, unless u update your printer.

• 
  @tbkowensАй бұрын

  Can you engrave your 3d prints with this?

• 
  @aim6macАй бұрын

  yes you can.

• 
  @tbkowensАй бұрын

  @@aim6mac You should do a video engraving 3d prints.

• 
  @kanrogcreationsАй бұрын

  Awesome video. I really want to get into lasers at some point, These look like they are mostly for engraving and not cutting? Would be nice to do commission work for sure!

• 
  @aim6macАй бұрын

  Thanks! The LP4 can cut too but since the working area of these are by design smaller then Core X Y lasers , they are mostly used for just engraving indeed.

• 
  @PedroCosta-rl9fiАй бұрын

  Só fez isso no sonic pad ? Eu tentei e não funciona

• 
  @vitvickyvidАй бұрын

  Does it work without the Beam?

• 
  @aim6macАй бұрын

  yes it does.

• 
  @ttodd910Ай бұрын

  Anyone know if you can use the app via hotspot to change settings. I dont have wifi and need to change the auto cleaning time to see if helps with litter going into waste bag. Presently its not catching the cats waste. I know of no way to extend the time manually.

• 
  @MultiHippie13Ай бұрын

  How well does it do with ASA?

• 
  @aim6macАй бұрын

  it's as good as PEI most of the times

• 
  @tokehgekko945525 күн бұрын

  ​@@aim6mac As good as PEI = bad 😬

• 
  @aim6mac25 күн бұрын

  @@tokehgekko9455 it prints well

• 
  @frankdearr2772Ай бұрын

  gREAT TOPIC? THANKS

• 
  @nautical_eddie7875Ай бұрын

  if you keyboard doesnt appear hold the back right trigger(M1) and press up on the D-pad. had it happen with ubisoft launcher and rockstar.

• 
  @Murat_Y.Ай бұрын

  thank you for your explanation. thanks to you I can now continue. I have learned so much from you. I will continue to follow your channel. Super educational. Greetings

• 
  @wfs1965Ай бұрын

  Good stuff, thnx!

• 
  @dredmannekinАй бұрын

  This is an awesome video! very easy to follow, can't wait to test the results now

• 
  @KonzertheldАй бұрын

  Hey, thanks for the video, that was helpful! If I understand it correctly, you replaced both the power supply and the power supply fan. Could I also just replace the fan and use the Creality PSU with the Gelid fan?

• 
  @aim6macАй бұрын

  the creality psu works on 24v fan, the meanwell works on 12v one , so you would need to buck down the creality one in order to be able to install the gelid fan.

• 
  @KonzertheldАй бұрын

  @@aim6mac Thank you!

• 
  @aim6macАй бұрын

  @@Konzertheld no problem, and a word of advice, please only open up a PSU if you know what you're doing.

• 
  @OnewaveshipwreckАй бұрын

  I have an ender 3 v1 with cr touch and am trying to correctly conduct the upgrade for the sprite extruder as well as get the CR touch to work. Do I need to conduct the sprite upgrade then update the CR touch on top of that?

• 
  @aim6macАй бұрын

  the model that i'm using already has a spot for the cr touch

• 
  @user-bs7uq4ej4uАй бұрын

  Hello, how can you connect your camera to he MainsailOS? In fliudd its working, in MainsailOS - not.

• 
  @aim6macАй бұрын

  thats a known issue, i couldn't figure it out myself neither, sorry

• 
  @paulie19681Ай бұрын

  Hi, have you ever had the connection lost issues? It seems there are some sort of problem of losing connection between the pad and the printers during printing.

• 
  @aim6macАй бұрын

  No I haven't , but then again i didn't use the setup for too long. But when i ask around i didn't really encounter that issue.

• 
  @thuanvuinh3470Ай бұрын

  thank for your help.

• 
  @radiotbo4646Ай бұрын

  cool video!!! keep it going!!

• 
  @aim6macАй бұрын

  Thank you !

• 
  @Maria-rh2chАй бұрын

  Ik krijg mijn panel niet werkend met de Nexus software, versie 1.5.102 heb jij een link waar ik de versie kan downloaden die jij gebruikt?

• 
  @aim6macАй бұрын

  kom naar mijn discord

• 
  @LucLavanantАй бұрын

  I have an Ender 3 V1 with the Sprite Pro, 4.2.7 mainboard, CR-Touch and screen v2. I am a beginner, and I don't know which file to put on the SD card, could you tell me how to do it, thank you in advance for your help.

• 
  @aim6macАй бұрын

  you should come to my discord, we'll help you there.

• 
  @petew39202 ай бұрын

  Fantastic tutorial. Thank you. What a legend!

• 
  @aim6mac2 ай бұрын

  you are welcome, happy to help!

• 
  @josipmihaljevic99762 ай бұрын

  Hi, have you published the model from the right side fan mount?

• 
  @aim6macАй бұрын

  Its on my discord

• 
  @sebh30352 ай бұрын

  Do you have just simply document to explain just how correct this issue? Because my english is not perfect and I don't understand all your video.. For the moment, I just download your file. It's not clear for me exactly

• 
  @aim6mac2 ай бұрын

  there is an auto translator function in youtube, there are many subtitels you can choose from in the video :)

• 
  @H0llyw00d-bruh2 ай бұрын

  "When it asks for "printer" i.p. adress does it refer to the chips info or my actual printer lol? If it refers to the chips how do I find this info?

• 
  @aim6mac2 ай бұрын

  as far as i remember it's asking for the printers IP adress.

• 
  @gary3322 ай бұрын

  Hi, Thanks for the video! On 5:51 i see that u use G10 plate on your X1 Carbon. if i use this do i still have to make adjustments to mine bambu lab. I use the P1S and would like to use it, previously i used it on my Elegoo but had to keep adjusting the bed level, it didn't see the plate somehow. how thick is your G10 plate? Alvast Bedankt voor je reactie.

• 
  @aim6mac2 ай бұрын

  hello thank you for your comment, under normal circumstances you don't have to adjust your bedlevel on a bambu printer (automatic bed leveling) make sure to choose smooth PEI/ high temp bed instead of Textured PEI, so that it can adjust to the smoothness of your G10 plate. Hope that helps!

• 
  @tbkowens2 ай бұрын

  I need to see this thing melting some plastic!

• 
  @aim6mac2 ай бұрын

  😏🤗

• 
  @radiotbo46462 ай бұрын

  I loved that pcbway song!!!! I'd like to see it on a future sponsorship