It’s a 2in lift but a 3in will give you more clearance.
@znyxwvutsrqponmlkjihgfedcba4 ай бұрын
awesome video bro
@Big_fields_554 ай бұрын
You think I can fit 35’s with 2.5 level kit? Has stock offset.
@parkersgarage66804 ай бұрын
Yes you can. Those rims I had were factory offset. It only rubbed alittle on the sway bar and the edge of the fender
@nickhendo39608 ай бұрын
It’s funny seeing the Mexicans with these on in the desert lol
@ntune779510 ай бұрын
i’m running 35 gladiator X comps on a 3” level kit and 3” spacers front and back had too trim a good amount but it looks good
@grandsport3270 Жыл бұрын
What size are your rims , bro ?
@parkersgarage6680 Жыл бұрын
These are 22” rims
@grandsport3270 Жыл бұрын
Can I run 20's on stock suspension ?
@parkersgarage668011 ай бұрын
@@grandsport3270 you should be able to. I know ones that are running 33s and 20s stock with no modifications.
@ridin_dirty Жыл бұрын
Any gear reduction, clutches, or clutch kit? Nice ride! Running 33 BKTs on my 2020 XP Turbo now and was looking at going 35s
@parkersgarage6680 Жыл бұрын
Everything was stock when I put them on. Just forward arms. I now have a 30% gear reduction in low and it turns them like no other!
@bigc7907 Жыл бұрын
What year and did you mod it to get the back seat to fold down? How much lift?
@parkersgarage668010 ай бұрын
It’s a 2016 and yes I had to cut about 2” or so off the mounts that keep the back of the seat secured to the body.
@bri7929 Жыл бұрын
Those ain't no 35s , it's a 22 inch wheel😂
@parkersgarage6680 Жыл бұрын
Obviously you don’t know a 35 and a 22 when you see them. I would be a lot less tire if it was 33”. Thanks for the comment though!
@offroaddaily2060 Жыл бұрын
Tell us more about your mods what tender springs you go with?
@parkersgarage6680 Жыл бұрын
I went with the rzr aid tender spring and the super atv 2” forward arched arms.
@loganlanfier6339 Жыл бұрын
Just ordered 35” bkts and 22s for my rzr gonna see what happens 😂🤙🏼
@anthoneysmith3436 Жыл бұрын
How does it ride and what kind of struts
@parkersgarage6680 Жыл бұрын
It rides smooth and it has the stock struts on it. There is some tire noise once’s the tires wear.
@frankiedelacruz3326 Жыл бұрын
You still running this same setup? If so how are you like it/ have you had any issues?
@parkersgarage6680 Жыл бұрын
I do still have this same setup. So far I haven’t had any problems out of the rzr or the tires. No broke axles or anything.
@1987FX16 Жыл бұрын
Secrets of leveled an 35s - ...So here's what my truck looks like, and my leather seats..
@ThisisForTheTVКүн бұрын
You ain't lying.
@slidewayz432 Жыл бұрын
I just got a 2017 high country and I can’t figure out how to fold the seat down mine only fold up. Was that custom or am I stupid lol
@parkersgarage6680 Жыл бұрын
Yes that is custom. You have to removed the seats and cut a small section of the brackets that hold the seat to back of the cab. I believe it was an inch or so. Super simple to do.
@slidewayz432 Жыл бұрын
@@parkersgarage6680 thanks so much for the info!!! Do u still have the truck and if so how is it??
@parkersgarage6680 Жыл бұрын
@@slidewayz432 unfortunately I don’t have the truck anymore.
@TurnThemWheels2 жыл бұрын
Good looking truck.
@nathencurey54962 жыл бұрын
Is there any chance you could list the parts by chance? Looking to do the same setup on my 21 xp turbo
@parkersgarage66802 жыл бұрын
All it is is 2 inch forward arched arms and tender springs. You honestly could clear 35s with just tender springs or forward arched arms. I could clear a 37s with this setup.
@KeptFaith12 жыл бұрын
Looks good bud💪
@parkersgarage66802 жыл бұрын
Thanks!👍
@mariomoya35652 жыл бұрын
Is this a 2 inch level?
@parkersgarage66802 жыл бұрын
I do believe it was a 2” or a 2.5” level. It was already installed before I brought the truck.
@Easy_on_sunday2 жыл бұрын
Where did u get the black side pillars???????
@parkersgarage66802 жыл бұрын
They are vinyl wrapped gloss black.
@robcbr912 жыл бұрын
22” snowflake rims eBay?? Thats where you got yours?
@parkersgarage66802 жыл бұрын
I bought mine at a local tire and rim shop near me. They had the best price at the time.
@Romerojesus13 жыл бұрын
You can bend your seats like tht 🤢
@parkersgarage66803 жыл бұрын
It just involves alittle bit of cutting on the back seats. Nothing that is to bad noticeable. I could do a video on it if you would like.
@Ivan-jc8hr3 жыл бұрын
Great looking truck! Do you think I would rub on 33s with those same wheels on a 2 inch level kit?
@parkersgarage66803 жыл бұрын
You shouldn’t have any problems with rubbing with a 33. You should have plenty of room.
@EarnstT20963 Жыл бұрын
I Have a 2017 1500 and installed 2 1/2 leveling block under the shock and run 275/70R18(33x10.8) on stock wheels with no rubbing.
@jamesyork60233 жыл бұрын
Just did 22” flakes and 285/55 ridge graps on a 2.5” level. Need to get a 1/4 spacer or something to address the sway bar rub
@parkersgarage66803 жыл бұрын
I have 1/4 pacer on mine and it still rubs the sway bar. You may can try 1/2 spacer and that should get you on the sway bar, but you will have to watch out for the bumper then.
@jamesyork60233 жыл бұрын
@@parkersgarage6680 yeah it’s dangerously close as it is. Time to break out the saw, Johnny Knoxville style 😂
@jamesyork60233 жыл бұрын
@@parkersgarage6680 you’ve got a gorgeous truck man. Mines only a 15 lt with leather but it still cleaned up nice
@parkersgarage66803 жыл бұрын
@@jamesyork6023 Hey that’s all that matters. Did you take your lower part of your bumper off? I was going to try 1/2 but I never got around to it. I have done got use to driving with it so I hardly ever rub the sway bar anymore.
@jamesyork60233 жыл бұрын
@@parkersgarage6680 I did, mine is a 2015 so I’m not sure in the difference of them vs yours. I just try to be as careful as possible now. You got insta brother? Hell of a build, I’ll give ya a follow!
@AppSkii3 жыл бұрын
Get a video of those sundowns. Are the the sd-4?
@Jayden_22613 жыл бұрын
Did you delete afm?
@parkersgarage66803 жыл бұрын
It is. I have a laptop tune on it for fuel mileage. But it doesn’t help mileage any with these 35s on it.
@Jayden_22613 жыл бұрын
@@parkersgarage6680 so I have a question, I have a 2014 and I wanna get rid of the muffler and add a straight pipe to get some rumble but if I do that do I need to leave the valve in the pipe that opens and closes on the inside or will that mess up the afm?
@parkersgarage66803 жыл бұрын
@@Jayden_2261 no it will not mess anything up, all the flap does is opens and closes when the truck has back pressure(V8 mode) or doesn’t have back pressure (V4 mode). The honestly only difference it may make is that it may sound slightly different, nothing to noticeable. I have mine stuck open at all times.
@Jayden_22613 жыл бұрын
@@parkersgarage6680 okay thanks man I’ll just take them and the muffler out, and good video I’ll subscribe and keep up on these I love watchin Chevy Silverado videos haha
@Jayden_22613 жыл бұрын
@@parkersgarage6680 so if I just take out the muffler and leave the flap valve in there would it sound better or no?
@Gusteeze3 жыл бұрын
Does it have the NorCal mod done?
@parkersgarage66803 жыл бұрын
It doesn’t have any cutting or trimming done to it. Only had to removed the mud flaps and the lower trim piece on the bumper.
@MA-id1hr3 жыл бұрын
At 0:43 you got a cable touching the exhaust... Just saying...
@parkersgarage66803 жыл бұрын
That’s the air line going to the air bag. It’s actually under the frame rail. But it does look like it’s on the exhaust. It was previously installed before I got the truck.
@MA-id1hr3 жыл бұрын
@@parkersgarage6680 Awesome! Hey, just pointing it out. Thanks for the reply mam!!👍👍
@Cowboy6843 жыл бұрын
plz stahp calling bolt-on modded trucks "Builds"
@duran46893 жыл бұрын
How’d you pull the seat down like that wtf😟😟teach me/ do a video over it
@ob-1502 Жыл бұрын
Same question
@asifkabir21273 жыл бұрын
slick truck. tour of the sound and exhaust setup you got?
@tylerking933 жыл бұрын
That interior doesn’t look good. I would rather it be black/grey
@bobbyamandaflores44703 жыл бұрын
3 Moto metal
@JDog14934 жыл бұрын
Are those mud or all terrains?
@parkersgarage66804 жыл бұрын
Jay Simz they are more of a mud tire than anything.
@JDog14934 жыл бұрын
Thanks for the video I have the 22x9 black Chevy wheels and have been wanting to do 35s on my leveling kit. Hard to find a video with someone actually explaining with 22s 👍
@riveraraul234 жыл бұрын
Do you have a link to the cutout?
@parkersgarage66804 жыл бұрын
Raul Rivera I don’t a buddy gave the cutout to me. Just get a cutout that has a motor on it similar to a window motor. They work the best.
@jesscrayton23274 жыл бұрын
SEEMS It is a ... leveling kit : 2.5” Tires : Discovery 35x12.50R22 wheels: CHROME 22” SNOWFLAKE wheels
@parkersgarage66804 жыл бұрын
Jess Crayton you are spot on! I’m not sure on the leveling kit’s correct height due to being previously installed before I got the truck.
@TheGonzalez19923 жыл бұрын
Have you tried a wheel spacer just a small one
@alexandercapuano40024 жыл бұрын
Do you know the offset of the wheels?
@parkersgarage66804 жыл бұрын
Alexander Capuano the wheels are a 22x9
@ericb13244 жыл бұрын
So I could go 35” with stock 20 inch rim and have no rubbing ?
@parkersgarage66804 жыл бұрын
Eric B it all depends on what kind of tire you get and how wide the tire is. The part that rubs is the side wall of the tire. If you go with ones with big aggressive side wall then you will rub. But if you get a non aggressive side wall then the likely chances of you rubbing goes down.
@ericb13244 жыл бұрын
Good to know thanks I’m planning on going with Toyo open country at3
@lizzysmith62944 жыл бұрын
22” WHEELS 35’s TIRES LEVELING KIT who knows what brand or size leveling kit.
@robertrobinette4453 жыл бұрын
Probably a 3 inch leveling kit
@alexh53583 жыл бұрын
@@robertrobinette445 it's around a 2 or 2.5 cuz he commented that he wanted a 3 inch
@lizzysmith62944 жыл бұрын
Thumbs down 👎 for NOT talking about wheel & TIRE SET UP ONLY !
@mr.h00ks594 жыл бұрын
First off, the truck looks great 👌 I am a big fan of the High Country brown interior. Have you given any thought to adding electric side steps?
@parkersgarage66804 жыл бұрын
Thanks. Yes amp research steps are my next thing on the list to do to it.
@freddyp41894 жыл бұрын
That's what I was gonna say need the powersteps!!
@jonclark94584 жыл бұрын
I live in Tupelo also, I see your truck around a lot! And it’s super nice. Great look man. Who you let out your lift on your truck?
@parkersgarage66804 жыл бұрын
Jon Clark Thanks man. It already came with a leveling kit on it when I brought it. I was going to go with a 3in level but I seen I could clear without doing it. But I installed leveling kits on trucks.
@jonclark94584 жыл бұрын
I need you get with you man! ASAP
@devonwatts81414 жыл бұрын
Does it rub on the upper control arm at full lock.
@parkersgarage66804 жыл бұрын
Devon Watts it doesn’t rub anywhere but the sway bar at full lock.
@devonwatts81414 жыл бұрын
Parker’s Garage thanks! 👍🏽
@ChrisGiron-pq3mf Жыл бұрын
Do you have a stock control arm ?
@bryanbrooks14394 жыл бұрын
Is this a 5.3 or 6.2 and how does the 35s affect power
@parkersgarage66804 жыл бұрын
bryan brooks it’s a 5.3. With my tune it affects gas mileage for sure but power not so much. I can easily turn them over with no hesitation. I’m not really sure if I didn’t have my truck tuned if it would affect any power.
@bryanbrooks14394 жыл бұрын
@@parkersgarage6680 what tune do you have and do the 35s make it set higher
@parkersgarage66804 жыл бұрын
bryan brooks I have a laptop tune from hp tuner on it I’m not sure what the specs are but it’s a fuel mileage tune. I was getting 22 mph before I put the 35s on it and it may have raised it up an inch or so not much that you can tell it honestly.
@bryanbrooks14394 жыл бұрын
@@parkersgarage6680 thank you
@tyronemrj21284 жыл бұрын
What sizes leveling kit you have on this truck. I have a 15 Silverado and I'll like to run 35's to on 24's
@parkersgarage66804 жыл бұрын
Tyrone Mr J it’s a 2in level on it. No trimming or anything. Only rubs sway bar on full lock.
@tyronemrj21284 жыл бұрын
@@parkersgarage6680 ok thank you so much for the information
@SV6SPD4 жыл бұрын
@@parkersgarage6680 What brand 2 inch leveling kit are you running on front and what is the rear leveled to?
@parkersgarage66804 жыл бұрын
JC Garage I’m honestly not sure what brand level it is. It was already installed when I brought the truck. The rear is also leveled with air bags also.
@cristiana952910 ай бұрын
@@parkersgarage6680you think i can run 22’s on 35’s ? i have a 2 1/2 front leveling kit in the front , but stock rear
@robbiejaegle27344 жыл бұрын
Does it rub on the fender I have a 18 denali with a 2” level and 22” rims I’d like to get the same tires as you
@parkersgarage66804 жыл бұрын
Robbie Jaegle no rub on the fenders. Only place that it runs is the sway bar. I’m going to do a in depth video of it here soon.
@robbiejaegle27344 жыл бұрын
Sounds good mine has The gm mug guards I’d hope it clears will probably go buy some after I see your other video u post
Пікірлер
What ls the lift in it 2in??? 3 or 3.5
It’s a 2in lift but a 3in will give you more clearance.
awesome video bro
You think I can fit 35’s with 2.5 level kit? Has stock offset.
Yes you can. Those rims I had were factory offset. It only rubbed alittle on the sway bar and the edge of the fender
It’s funny seeing the Mexicans with these on in the desert lol
i’m running 35 gladiator X comps on a 3” level kit and 3” spacers front and back had too trim a good amount but it looks good
What size are your rims , bro ?
These are 22” rims
Can I run 20's on stock suspension ?
@@grandsport3270 you should be able to. I know ones that are running 33s and 20s stock with no modifications.
Any gear reduction, clutches, or clutch kit? Nice ride! Running 33 BKTs on my 2020 XP Turbo now and was looking at going 35s
Everything was stock when I put them on. Just forward arms. I now have a 30% gear reduction in low and it turns them like no other!
What year and did you mod it to get the back seat to fold down? How much lift?
It’s a 2016 and yes I had to cut about 2” or so off the mounts that keep the back of the seat secured to the body.
Those ain't no 35s , it's a 22 inch wheel😂
Obviously you don’t know a 35 and a 22 when you see them. I would be a lot less tire if it was 33”. Thanks for the comment though!
Tell us more about your mods what tender springs you go with?
I went with the rzr aid tender spring and the super atv 2” forward arched arms.
Just ordered 35” bkts and 22s for my rzr gonna see what happens 😂🤙🏼
How does it ride and what kind of struts
It rides smooth and it has the stock struts on it. There is some tire noise once’s the tires wear.
You still running this same setup? If so how are you like it/ have you had any issues?
I do still have this same setup. So far I haven’t had any problems out of the rzr or the tires. No broke axles or anything.
Secrets of leveled an 35s - ...So here's what my truck looks like, and my leather seats..
You ain't lying.
I just got a 2017 high country and I can’t figure out how to fold the seat down mine only fold up. Was that custom or am I stupid lol
Yes that is custom. You have to removed the seats and cut a small section of the brackets that hold the seat to back of the cab. I believe it was an inch or so. Super simple to do.
@@parkersgarage6680 thanks so much for the info!!! Do u still have the truck and if so how is it??
@@slidewayz432 unfortunately I don’t have the truck anymore.
Good looking truck.
Is there any chance you could list the parts by chance? Looking to do the same setup on my 21 xp turbo
All it is is 2 inch forward arched arms and tender springs. You honestly could clear 35s with just tender springs or forward arched arms. I could clear a 37s with this setup.
Looks good bud💪
Thanks!👍
Is this a 2 inch level?
I do believe it was a 2” or a 2.5” level. It was already installed before I brought the truck.
Where did u get the black side pillars???????
They are vinyl wrapped gloss black.
22” snowflake rims eBay?? Thats where you got yours?
I bought mine at a local tire and rim shop near me. They had the best price at the time.
You can bend your seats like tht 🤢
It just involves alittle bit of cutting on the back seats. Nothing that is to bad noticeable. I could do a video on it if you would like.
Great looking truck! Do you think I would rub on 33s with those same wheels on a 2 inch level kit?
You shouldn’t have any problems with rubbing with a 33. You should have plenty of room.
I Have a 2017 1500 and installed 2 1/2 leveling block under the shock and run 275/70R18(33x10.8) on stock wheels with no rubbing.
Just did 22” flakes and 285/55 ridge graps on a 2.5” level. Need to get a 1/4 spacer or something to address the sway bar rub
I have 1/4 pacer on mine and it still rubs the sway bar. You may can try 1/2 spacer and that should get you on the sway bar, but you will have to watch out for the bumper then.
@@parkersgarage6680 yeah it’s dangerously close as it is. Time to break out the saw, Johnny Knoxville style 😂
@@parkersgarage6680 you’ve got a gorgeous truck man. Mines only a 15 lt with leather but it still cleaned up nice
@@jamesyork6023 Hey that’s all that matters. Did you take your lower part of your bumper off? I was going to try 1/2 but I never got around to it. I have done got use to driving with it so I hardly ever rub the sway bar anymore.
@@parkersgarage6680 I did, mine is a 2015 so I’m not sure in the difference of them vs yours. I just try to be as careful as possible now. You got insta brother? Hell of a build, I’ll give ya a follow!
Get a video of those sundowns. Are the the sd-4?
Did you delete afm?
It is. I have a laptop tune on it for fuel mileage. But it doesn’t help mileage any with these 35s on it.
@@parkersgarage6680 so I have a question, I have a 2014 and I wanna get rid of the muffler and add a straight pipe to get some rumble but if I do that do I need to leave the valve in the pipe that opens and closes on the inside or will that mess up the afm?
@@Jayden_2261 no it will not mess anything up, all the flap does is opens and closes when the truck has back pressure(V8 mode) or doesn’t have back pressure (V4 mode). The honestly only difference it may make is that it may sound slightly different, nothing to noticeable. I have mine stuck open at all times.
@@parkersgarage6680 okay thanks man I’ll just take them and the muffler out, and good video I’ll subscribe and keep up on these I love watchin Chevy Silverado videos haha
@@parkersgarage6680 so if I just take out the muffler and leave the flap valve in there would it sound better or no?
Does it have the NorCal mod done?
It doesn’t have any cutting or trimming done to it. Only had to removed the mud flaps and the lower trim piece on the bumper.
At 0:43 you got a cable touching the exhaust... Just saying...
That’s the air line going to the air bag. It’s actually under the frame rail. But it does look like it’s on the exhaust. It was previously installed before I got the truck.
@@parkersgarage6680 Awesome! Hey, just pointing it out. Thanks for the reply mam!!👍👍
plz stahp calling bolt-on modded trucks "Builds"
How’d you pull the seat down like that wtf😟😟teach me/ do a video over it
Same question
slick truck. tour of the sound and exhaust setup you got?
That interior doesn’t look good. I would rather it be black/grey
3 Moto metal
Are those mud or all terrains?
Jay Simz they are more of a mud tire than anything.
Thanks for the video I have the 22x9 black Chevy wheels and have been wanting to do 35s on my leveling kit. Hard to find a video with someone actually explaining with 22s 👍
Do you have a link to the cutout?
Raul Rivera I don’t a buddy gave the cutout to me. Just get a cutout that has a motor on it similar to a window motor. They work the best.
SEEMS It is a ... leveling kit : 2.5” Tires : Discovery 35x12.50R22 wheels: CHROME 22” SNOWFLAKE wheels
Jess Crayton you are spot on! I’m not sure on the leveling kit’s correct height due to being previously installed before I got the truck.
Have you tried a wheel spacer just a small one
Do you know the offset of the wheels?
Alexander Capuano the wheels are a 22x9
So I could go 35” with stock 20 inch rim and have no rubbing ?
Eric B it all depends on what kind of tire you get and how wide the tire is. The part that rubs is the side wall of the tire. If you go with ones with big aggressive side wall then you will rub. But if you get a non aggressive side wall then the likely chances of you rubbing goes down.
Good to know thanks I’m planning on going with Toyo open country at3
22” WHEELS 35’s TIRES LEVELING KIT who knows what brand or size leveling kit.
Probably a 3 inch leveling kit
@@robertrobinette445 it's around a 2 or 2.5 cuz he commented that he wanted a 3 inch
Thumbs down 👎 for NOT talking about wheel & TIRE SET UP ONLY !
First off, the truck looks great 👌 I am a big fan of the High Country brown interior. Have you given any thought to adding electric side steps?
Thanks. Yes amp research steps are my next thing on the list to do to it.
That's what I was gonna say need the powersteps!!
I live in Tupelo also, I see your truck around a lot! And it’s super nice. Great look man. Who you let out your lift on your truck?
Jon Clark Thanks man. It already came with a leveling kit on it when I brought it. I was going to go with a 3in level but I seen I could clear without doing it. But I installed leveling kits on trucks.
I need you get with you man! ASAP
Does it rub on the upper control arm at full lock.
Devon Watts it doesn’t rub anywhere but the sway bar at full lock.
Parker’s Garage thanks! 👍🏽
Do you have a stock control arm ?
Is this a 5.3 or 6.2 and how does the 35s affect power
bryan brooks it’s a 5.3. With my tune it affects gas mileage for sure but power not so much. I can easily turn them over with no hesitation. I’m not really sure if I didn’t have my truck tuned if it would affect any power.
@@parkersgarage6680 what tune do you have and do the 35s make it set higher
bryan brooks I have a laptop tune from hp tuner on it I’m not sure what the specs are but it’s a fuel mileage tune. I was getting 22 mph before I put the 35s on it and it may have raised it up an inch or so not much that you can tell it honestly.
@@parkersgarage6680 thank you
What sizes leveling kit you have on this truck. I have a 15 Silverado and I'll like to run 35's to on 24's
Tyrone Mr J it’s a 2in level on it. No trimming or anything. Only rubs sway bar on full lock.
@@parkersgarage6680 ok thank you so much for the information
@@parkersgarage6680 What brand 2 inch leveling kit are you running on front and what is the rear leveled to?
JC Garage I’m honestly not sure what brand level it is. It was already installed when I brought the truck. The rear is also leveled with air bags also.
@@parkersgarage6680you think i can run 22’s on 35’s ? i have a 2 1/2 front leveling kit in the front , but stock rear
Does it rub on the fender I have a 18 denali with a 2” level and 22” rims I’d like to get the same tires as you
Robbie Jaegle no rub on the fenders. Only place that it runs is the sway bar. I’m going to do a in depth video of it here soon.
Sounds good mine has The gm mug guards I’d hope it clears will probably go buy some after I see your other video u post
Love them snow flake rims too!