Пікірлер

• 
  @davidiraheta498314 күн бұрын

  Could I know the full set name to be able to order it for my ram 1500?

• 
  @MrJsmith225415 күн бұрын

  Does it work with the tundra stock back flip

• 
  @MrJsmith225415 күн бұрын

  Or what clamps will work

• 
  @ToddsTruckLife15 күн бұрын

  That's a work in progress. The BakFlip rails were recently redesigned and will not work with the Elevate rails, but they are going to make a BakFlip rail with a built in t-slot, similar to the rail on the Revlover X4TS, that way it will work with the Elevate Rack without the need for the supplement t-slot rail. That product will most likely be unveiled at SEMA and my guess is that we'll see them start shipping around the end of the year.

• 
  @CROFTwins24 күн бұрын

  You selling the bracket?

• 
  @ToddsTruckLife23 күн бұрын

  I sent it up the chain. If they decide to make it, my guess is that it would be under the Go Rhino brand.

• 
  @blondgolfer824 күн бұрын

  This video helped me a ton and I don't even have a Maverick....Same thing applies to the F150. Thanks for the tip, it made a huge difference.

• 
  @ToddsTruckLife24 күн бұрын

  Awesome!!

• 
  @CesarLopez-xp9po24 күн бұрын

  Wowwww I didn't know that 😂 and I been using mines for a hole month!! Thank you sir 🤙

• 
  @ToddsTruckLife24 күн бұрын

  Glad to be helpful!!

• 
  @joshportelli26 күн бұрын

  Thanks! Looks the same as my last truck, except there is 1 wheel nut to remove from spare bracket.

• 
  @jonflanagin6682Ай бұрын

  Thanks for the video. Same way that Ford has done it for more then 20 years.

• 
  @benda777nbaАй бұрын

  Yes thank you so much! I appreciate the kesson as a tracher I may know my subject area but dont know much about trucks as my dad is the worst teacher ever😂

• 
  @ToddsTruckLifeАй бұрын

  I appreciate teachers. I love to share knowledge, so I guess that makes me a teacher at heart. I was also the product trainer at RealTruck for several years. Never stop learning or teaching! 🙂 Glad I was helpful!

• 
  @GarrettWattsАй бұрын

  Awesome video! Cant wait to install mine in a couple days

• 
  @papillon5537Ай бұрын

  If compared to Cobb which is better for maverick ? Thank you

• 
  @ToddsTruckLifeАй бұрын

  I've not used the Cobb tuner on the Maverick, so I can't compare tuning, but DiabloSport Trinity had a larger display for showing things like boost, transmission fluid temp, engine coolant temp, intake air temp, current gear, etc. It also has a 93 octane tune, 87 tune, and towing tune. Hope that's helpful!

• 
  @papillon5537Ай бұрын

  @@ToddsTruckLife Thank Tod! Mine is 2024 maverick FX4, I followed your link and it seems not supported by DiabloSports yet, If we use this tuning will affect the warranty?

• 
  @ToddsTruckLifeАй бұрын

  @papillon5537 warranty claims are only denied if the aftermarket parts or tune caused damage. I've had mine in for recalls, and my techs are cool with it. I always return to stock before any kind of service, then reinstall the tune when I get it back, because they usually flash the PCM for updates, and that will erase anything written and can create problems if you try to reinstall after that. Then you have to get the tuning company's service reps to help restore everything.

• 
  @papillon5537Ай бұрын

  Thanks for the important hint!!!@@ToddsTruckLife

• 
  @spencerwhite21Ай бұрын

  Looks awesome!

• 
  @ToddsTruckLifeАй бұрын

  Thanks!

• 
  @realdata6116Ай бұрын

  But they scratch

• 
  @ToddsTruckLifeАй бұрын

  Anything scratches with enough force, and Gorilla has a much better finish than most. The biggest thing I'll recommend is to keep pneumatic impact tools away from your lug nuts.

• 
  @hickshomestead113Ай бұрын

  I installed a set on my 2004 GMC Yukon and it made a world of difference in towing my travel trailer. I removed the springs and it was still a pain to install. Now that I have my 22 FX4 with the 4K and I tow a max weight travel trailer, I'm going to install the same kit on mine this weekend. I'm glad to see it is possible to do without disassembling the rear control arms. I was dreading that part. I will attempt to use a vacuum pump to pull most of the air out and then attempt to squeeze the air bags in.

• 
  @matthewgaines10Ай бұрын

  You could've just stopped at tonneau covers never will keep all water out.

• 
  @ToddsTruckLifeАй бұрын

  😆 Yes, I could have. But I'm driven by the desire to make things a little bit better. 😉

• 
  @danielcranston3752 ай бұрын

  Thanks for the video, I helped me on the side of the road. I could not find instructions for lowering the spare tire in the manual, apparently I was doing something wrong, but your video helped a lot.

• 
  @ToddsTruckLife2 ай бұрын

  Happy I was helpful!

• 
  @puranpoon84612 ай бұрын

  Hi I have bakflip MX4. Is that work with t slot rails

• 
  @randywendel46712 ай бұрын

  I would definitely still add the seal despite having a bedrug. I did much gravel road driving recently and acquired much dust around the tailgate area and onto items sitting in the back on the bedrug (duffle bags, suitcases, etc). I'm currently looking at what may work to help reduce that gap.

• 
  @user-rt5ic7ob5g2 ай бұрын

  So....bad work. difficult...

• 
  @ChHo-kd1ce3 ай бұрын

  Thanks for taking the time to make this video its nice to see the actual process so the first time is not on the side of the road with a flat !

• 
  @ToddsTruckLife3 ай бұрын

  I'm happy you found it helpful!

• 
  @user-er7vj5xk5w3 ай бұрын

  Oh man, thank you so much for this video! I've been scouring the internet. Do you have to get the backrack spacers for these low profile tone covers? Gator fx

• 
  @jesses.54423 ай бұрын

  Just picked up my Maverick last week and this thought barely struck me last night. Thanks for a quick and easy video on this!

• 
  @xxUncleBuckxx3 ай бұрын

  I upgraded the rims on my 24 XLT FX4 when I ordered it to the "17” Machined-face Carbonized Gray painted Aluminum Wheels" for $795. Same rims as the Tremor without the paint accent and it came with Falken wildpeaks 235/65 17.

• 
  @user-sx8qf5hh5m3 ай бұрын

  The Gator EFX hard tonneau cover works with the Elevate rack. I installed them both on my '22 Ram 2500. What I do not like is the lack of Molle panel options. Very limited. Also, anyone with a 1/2" socket wrench and set of Allen wrenches can dismantle this pretty easily and make off with parts or all of your rack. Other than that, a very sturdy, adjustable system..

• 
  @isaynox3 ай бұрын

  How much static weight realistically do you think? I know at 751 lbs its not going to cave but between myself and the people i want to put in my RTT it might be close to or right at 750. 2nd part of the question, how easy does this work with a Tundra Factory tonneau?(Bakflip mx4)

• 
  @ToddsTruckLife3 ай бұрын

  Weight ratings were established for a full-size truck model, at the tallest setting because the taller the uprights and further apart they are, the weaker the scenario. Static is 750 pounds. That's if you're parked at the campsite with all the people and gear in the tent. 500 pounds driving on the street and 250 bouncing down the trail. Unfortunately, with the way the rail attaches to the threaded Deck Rail holes on the Tundra, it can't accommodate a t-slot rail to be sandwiched between the bed cap and the cover's rail.

• 
  @isaynox3 ай бұрын

  @@ToddsTruckLife Your saying it doesn't work with that tonneau on the trudra?

• 
  @ToddsTruckLife3 ай бұрын

  @@isaynox if it's the older style design that clamps to the bed rail flange, then it would work as long as you have 1/8" between the frame of the cover and the inside of the rail. But the newer generation covers don't clamp the same, and the aluminum mounting brackets bolt directly into the threaded holes in the top of the bed. That design doesn't work with the t-slot rails.

• 
  @MrJsmith225413 күн бұрын

  @ToddsTruckLife thanks Todd.. I have already purchased the elevate rack and I believe it's well past the returning date unfortunately. It seems like the only problem is making the clamps work.. there's no way to improvise these clamps like adding some washers or something?

• 
  @MrMNRichardWright3 ай бұрын

  That’s tricky

• 
  @MrMNRichardWright3 ай бұрын

  Garage door bracket

• 
  @jalenmoore883 ай бұрын

  Have you talked about gas mileage compared to stock after your lift and tires?

• 
  @jaydlonewolf63754 ай бұрын

  watching over the process🙂

• 
  @jaydlonewolf63754 ай бұрын

  😱👍👍👌

• 
  @69jeffb694 ай бұрын

  did you try installing the x4s with the ts rails? if so are they compatible? i know you said in another video but i heard mixed reviews

• 
  @ToddsTruckLife4 ай бұрын

  I had my X4S installed with the t-slot rails and it worked great, but there were some engineering tollerance changes, and some people have had fitment issues. Fortunately, the Revlover X4TS is scheduled to start shipping at the beginning of April, and that has a t-slot built into the rail, so there won't be a need for the additional t-slot rail and the installation will be much simpler.

• 
  @69jeffb694 ай бұрын

  @@ToddsTruckLife thanks for the quick reply, I have the ford oem x4s that has the rubber underneath instead of the cloth and I’m wondering if the elevate t slots will be compatible?

• 
  @ToddsTruckLife4 ай бұрын

  @69jeffb69 the "X4TS rails only" will be available for those who want to convert their Revlover.

• 
  @69jeffb694 ай бұрын

  @@ToddsTruckLife ok so I guess the ts rails will not fit my vehicle then? That’s a bummer. Thanks for the help

• 
  @troydawson86064 ай бұрын

  Great tires! I just put 245/60R18 on my stock height XLT. I mounted them on 18x8.5" Axis 5 rims. No rubbing or other issues. I bought this truck as a plaything, so MPG be damned! 😀

• 
  @ramonahumada44 ай бұрын

  Nice! Take vid at night please.

• 
  @ToddsTruckLife4 ай бұрын

  Night shots can be tricky because of automatic light balancing, but I do want to get that. Stay tuned!

• 
  @byronpranger67984 ай бұрын

  Love the raptor lights. Can you make a list of all your mods and where to get them?

• 
  @ToddsTruckLife4 ай бұрын

  Well I have a lot of stuff on this thing, but I'm sitting in an airport right now. LOL Is there anything in particular you want to know about?

• 
  @byronpranger67984 ай бұрын

  Nothing in particular. Nice setup. Once I get mine, I'll go back over the video.

• 
  @mid-binjin4 ай бұрын

  😂😂😂 haha 💯 Be careful! I used the discount additive...now, I'm driving a Yugo 😮 😢

• 
  @Combatpzman4 ай бұрын

  The colour match looks good. I saw these flares on an oxford white Maverick, just the black plastic and it looked terrible! Good job Todd!

• 
  @ToddsTruckLife4 ай бұрын

  Thanks!

• 
  @forrestpanda4 ай бұрын

  How to fix the corner cap if it is broken? Thanks

• 
  @ToddsTruckLife4 ай бұрын

  If the corner cap is broken, call customer service, and they can get you a replacement.

• 
  @Justin-hz8bh4 ай бұрын

  @Todd Truck Life I just wanted to say thanks for making this video to help out us Mav owners! Very helpful. Whatever solution you might come up with for the bulkhead drain, I'd be interested. Thanks

• 
  @Samsancas4 ай бұрын

  That is perfect. But, isn’t better if you put the fill valve inside the cubby in the bed?

• 
  @ToddsTruckLife4 ай бұрын

  You can route the fill value to any place you want. I have mine set up so that I can have different pressures in each bag, so i have 2 valves, and i wanted a convenient and intuitive location for each valve if I need to fill manually. I also have the Wireless Air kit from AirLift, that I haven't had the time to install yet, but that will allow me to control the bag pressure remotely with my phone app or with their controller. Most people will probably keep the bags at the same pressure and only need 1 fill valve, and it's easier to find a convenient and intuitive location for 1 valve than it is for 2.

• 
  @omarfernandez85764 ай бұрын

  Did these bags affect the ride when unloaded?

• 
  @ToddsTruckLife4 ай бұрын

  Not that I noticed. That was a concern of mine too. You have to keep at least 5psi in the bags, so I was concerned that it might be a bit stiffer unloaded, but I couldn't tell the difference. Once I loaded it up with the all the stuff I keep in my bed and on my rack, I ended up with 17psi to get the ride height back. (I haul a lot around. LOL)

• 
  @user-hs4do8rt7c5 ай бұрын

  I have a 2024 Ford Maverick Tremor so this is very good information to know.😊 That looks like a brake part from another vehicle.

• 
  @joesmith-my8jf5 ай бұрын

  How have your cv joints held up? Any issues?

• 
  @ToddsTruckLife5 ай бұрын

  They haven't started showing the symptoms yet, but there is a slight boot leak as so many of the 2022s had, so I need to take it in and have them replaced under warranty. I'm just so busy. LOL I have no idea when I'll have the time to schedule it.

• 
  @user-ou6ky2sd7c6 ай бұрын

  Would you share the specific tailgate seal product you’re using?

• 
  @ToddsTruckLife6 ай бұрын

  I've used several, and they are very similar to each other, but I think the one I had here was from Retrax. realtruck.com/p/retrax-tailgate-gasket/v/ford/maverick/2022/

• 
  @user-vd9of1ol6t6 ай бұрын

  Hi Tod,…are there side Molle for these Elevate Racks? Thanks!

• 
  @ToddsTruckLife6 ай бұрын

  Not yet

• 
  @user-vd9of1ol6t6 ай бұрын

  Thanks.

• 
  @JimShieldsphoto7 ай бұрын

  Exactly. Great job.

• 
  @ToddsTruckLife7 ай бұрын

  Thank you!

• 
  @jpkenda147 ай бұрын

  What headache rack did you use on top of that?

• 
  @ToddsTruckLife7 ай бұрын

  That's the BackRack Safety Rack. 😊

• 
  @user-er7vj5xk5w3 ай бұрын

  Did you have to get the additional spacer? I cant tell in the vid​@@ToddsTruckLife

• 
  @JimShieldsphoto7 ай бұрын

  Thanks so much for your video. I haven’t had to use my spare yet but watching this really helped in case I do need to. I’m tired of asking just simple questions on Facebook as a lot of people on there just want to shame you for being so dumb. Mostly you just get “read the manual”. Sometimes all you want is a simple answer to a question and people get all rude. Thanks for the video.

• 
  @ToddsTruckLife7 ай бұрын

  Yes, sir! Not everyone immediately reads their manual from cover to cover when they first take possession of their truck. I always invite questions, and if I can help you out, I like that. So what if you can also find the information in the manual. I like videos and answers from humans more than I like reading manuals. 😉

• 
  @steeevo01367 ай бұрын

  Why oh why didn't they design this system to allow for side rails ? That would "elevate" it to the functionality of the Yakima OverHaul rack system . . . . see what I did there 😅

• 
  @ToddsTruckLife7 ай бұрын

  So, they just showed side rails as part of the Elevate Expansion at SEMA. That should be available soon! I'm also working on more expandable features, but I can't share about those yet. Sorry, NDA rules, not mine. 😉

• 
  @donaldredline9757 ай бұрын

  Thank you very much, that’s why I’m a member of AAA

• 
  @fernandoviray86007 ай бұрын

  Can you mount a molle panels on the rails or rack?

• 
  @ToddsTruckLife7 ай бұрын

  Working on that! 😉

• 
  @fernandoviray86007 ай бұрын

  Will you be able to notify me when it’s available? If it’s possible..

• 
  @ToddsTruckLife7 ай бұрын

  @fernandoviray8600 you can follow the RealTruck channel and keep an eye on the site. I'll try to get a video up here, when they're available too. 🙂

• 
  @norzoloco17 ай бұрын

  Hi there, just got my maverick a few days ago. Real truck reps told me i could use this rack system to haul extension ladders. What do you think? Our longest ladder is about a 32 footer so about 17' long when unextended and would hang over the roof by quite a bit, but i believe these racks go higher. Do you think these would work for me?

• 
  @ToddsTruckLife7 ай бұрын

  Yes, the rack will work, but I'd recommend either a cab rack for the ladder extension above the cab, or at least a compressible pad to go between the ladder and the front of your cab. Keep in mind, there is only about 3 1/2 feet between the load bars, so if you have a foot hanging off the back, then you have 12 1/2 feet hanging off the front. You want something to relieve the stress from the front. When I haul a full-size canoe, I'll let it rest on a pool noodle above the cab. When I tighten my rachet straps on my front load bar, it compresses the pool noodle, holding it in place and balancing the pressure. Hope that's helpful! 🙂

• 
  @norzoloco15 ай бұрын

  Thanks for the reply! I am pretty much settled on the elevate rack so I can also have a tonneau cover. It would be nice to have a metal toolbox attached to the racks for extra storage without losing bed space.. I was thinking I could bolt the toolbox to the racks. Would be interested to hear your opinion on that.

• 
  @ToddsTruckLife5 ай бұрын

  @norzoloco1 for me, tool boxes are all about organized storage that's accessible conveniently. I like Swing Cases on most trucks, but the Maverick already has a small bed, so I actually prefer to use a removable divider by the tailgate. Just personal preference. Set it up however it works best for you.