What did you add intake-wise with this cam? Just curious if I can run the stock intake and throttle body w/ tune atm.
@SomeWheelsRequired11 ай бұрын
Yes you can, this setup was fully stock intake and throttle body. With the current procharger setup, I'm still running stock TB and intake with the exception of imrc deletes.
@MikeGubisch Жыл бұрын
i come back to this video all the timeee
@SomeWheelsRequired Жыл бұрын
Glad you enjoy it!
@MikeGubisch Жыл бұрын
@@SomeWheelsRequired it’s literally therapy for me bro thank you!
@SomeWheelsRequired Жыл бұрын
@@MikeGubisch absolutely!
@undeniable7717 Жыл бұрын
Does this require a tune to start? Sounds great
@SomeWheelsRequired Жыл бұрын
Should be able to get it started without a tune. Would only ever use that to get it on a trailer if that's what you're getting at.
@Teplinski85 Жыл бұрын
💓
@moisesmoreno4826 Жыл бұрын
Hey did it feel faster of the line with the cams or did it feel slower?
@SomeWheelsRequired Жыл бұрын
I felt that it was faster.
@moisesmoreno4826 Жыл бұрын
@@SomeWheelsRequired cool is it automatic ?
@SomeWheelsRequired Жыл бұрын
@@moisesmoreno4826 nope, it is a manual.
@mikethehobbyist Жыл бұрын
Love the channel name
@SomeWheelsRequired Жыл бұрын
Thank you!
@philipshaffer4012 жыл бұрын
You get the borlas on I have pretty much same set up and look for cleaner exhaust note
@SomeWheelsRequired2 жыл бұрын
Yup! They definitely have a good sound. I'll be posting up a video soon as I finally got footage of it.
@philipshaffer4012 жыл бұрын
@@SomeWheelsRequired yea need some cleaner then the Flowmaster with cams wanting to get rid of drone and the tinnxan sound from cams
@MikeGubisch2 жыл бұрын
godly
@cisntsharp84272 жыл бұрын
Don’t lie we all know that last clip sounded like a vette
@SomeWheelsRequired2 жыл бұрын
Sounds like a 3 valve with corsas to me! 🤣 In all honesty the corsas have an extremely distinct sound no matter the car they're on, and I did feel I lost a bit of the 3 valve characteristic sound when I had these on. Still sounded fantastic though!
@cisntsharp84272 жыл бұрын
Yeah still sounds great! I want to do something like that to mine but I just took the mufflers off and straight piped it
@Rnitzsche042 жыл бұрын
Sounds good I can't wait to be done with my build then boost and meth injection..I just installed my frpp cams, bottom end is getting rebuilt
@SomeWheelsRequired2 жыл бұрын
Sounds like a good time!
@dans08gt932 жыл бұрын
What axle back?
@SomeWheelsRequired2 жыл бұрын
SSS Adrenaline axle backs. Not sure they make them anymore, but I've read the LMR SVE branded axle backs are the same thing. Can't promise that though.
@CBRuRedE12 жыл бұрын
Hows it going, bud? Quick question, how are the Pypes long tubes and H pipe holding up? I picked up a 2006 GT recently and am considering Pypes lt's, catted H-pipe and a Borla stinger cat back.
@SomeWheelsRequired2 жыл бұрын
I've had them on the car for probably 8 years or so, and actually picked them up used. No issues at all.
@CBRuRedE12 жыл бұрын
@@SomeWheelsRequired Thanks for the response, man. I appreciate it. Take care.
@SirenS5502 жыл бұрын
Heavily considering getting a 3v instead of a new GT. They sound so raw bruh
@SomeWheelsRequired2 жыл бұрын
They definitely have a unique sound!
@therealmvp76692 жыл бұрын
What did you end up going with? I am between those two cars also. The new gt is faster and has more tech but the 3v sounds and looks better
@jimbrow832 жыл бұрын
Need cats to clean up the sound
@parraotgreen78992 жыл бұрын
I'm in the market for a V8 with cramming in mind. I'm guessing you've been running this cam for a while now? Any major repairs you've come across that's mostly due to the cam? The GT sounds mean, btw!
@SomeWheelsRequired2 жыл бұрын
Thanks! No issues to report. Has also been supercharged for a good while now.
@abdulellahalharthi16492 жыл бұрын
Great build ! and sounds badass 💪🏻💪🏻
@SomeWheelsRequired2 жыл бұрын
Thank you!
@hankduncan88842 жыл бұрын
That sounds like heaven. Im so tempted to get em but the price tag is ridiculous.
@SomeWheelsRequired2 жыл бұрын
Thanks! They for sure aren't cheap, but they're definitely a good exhaust and nothing else sounds like them.
@justa3valve3 жыл бұрын
Ha I have the same exact plate number
@mrws6023 жыл бұрын
Needs an ls
@linkinparkdrift3 жыл бұрын
What mufflers did you end up going with?
@SomeWheelsRequired3 жыл бұрын
I went with Borla Touring mufflers.
@linkinparkdrift3 жыл бұрын
@@SomeWheelsRequired How are they? I know those are decently quiet. I recently put on my old American Thunder 60 series mufflers, replacing my Outlaws. It sounds good, but it's way too quiet!
@SomeWheelsRequired3 жыл бұрын
@@linkinparkdrift significantly quieter. I'm happy with the volume honestly, quiet enough when cruising and at idle if I have law enforcement behind me, but they bark well when you get on it. I absolutely miss the corsas sometimes, especially the crispness with the cam chop, but I'm thinking I'll stick with the tourings long term. Just wish they were as quiet in the cabin as the corsas. I'm assuming the supercharger contributes to the drone I get with them that others haven't.
@linkinparkdrift3 жыл бұрын
@@SomeWheelsRequired I'm actually surprised that the Corsas are that quiet inside. I've never experienced them. Only from the outside and they are ear piercing lol. How are they compared to your old SSS mufflers. I believe those are Borla S-Type knockoffs, I might be wrong though.
@SomeWheelsRequired3 жыл бұрын
@@linkinparkdrift yup you're correct on the sss mufflers. They're absolutely awful drone wise. The corsas you can definitely hear inside, it just doesn't have the ear piercing deep drone. The tourings are a good in between.
@seraph77443 жыл бұрын
This may sound dumb but I have a 08 and needed to know if I can pair ANY Longtube headers with any x pipe I was gonna do like the pypes x pipe cut and clamp with bbk long tubes since I called pypes and they are on back order for 6 months on there long tubes and now have catted x pipes only so can I pair long tube headers or shorty headers with any x pipe ?
@SomeWheelsRequired3 жыл бұрын
Some mate up, most do not. I believe I've read kooks mid pipes fit pypes headers, but that's about where it ends unfortunately. The cut and clamp x pipe is strictly meant to replace the small h cross over portion of your stock midpipe, nothing else. You can pair shorty headers with any mid pipe that is designed to be an exact replacement of the stock midpipe as each are designed to be replaced independently of each other, but I wouldn't bother with shorties personally.
@seraph77443 жыл бұрын
@ some wheels required are you selling your long tubes or where did you buy the pypes long tube headers?
@SomeWheelsRequired3 жыл бұрын
@@seraph7744 I am not selling them, no. I picked them up used probably around 8 years ago.
@darionwalker40553 жыл бұрын
I love those better than 200 mustang 🏆🏆🏆🔥🔥🔥🔥🏆🚘🏎🏎👍🏾👍🏾🏎🏎🚘🚘🏆
@darionwalker40553 жыл бұрын
🏆🏆🏆🔥🔥🔥🔥🏎🏎🏎🏎🚘🚘🏆🏆🔥👍🏾👍🏾👍🏾🏎🏎🚘🏆🏆🔥🥇
@jasonkenel50143 жыл бұрын
Hi, are you selling the corsa sport axle backs?
@SomeWheelsRequired3 жыл бұрын
I am not at the moment, sorry! Hanging onto them for now.
@vanyaandreev89983 жыл бұрын
I really like the way it looks. Could you tell please what is the rear diffuser model?
@SomeWheelsRequired3 жыл бұрын
Thanks! Hit up brandon66polar on Instagram. He makes them!
@68chevelletype3 жыл бұрын
Sounds amazing
@SomeWheelsRequired3 жыл бұрын
Thanks!
@KingBattlon3 жыл бұрын
That's a hell of a setup!
@SomeWheelsRequired3 жыл бұрын
Thanks!!
@FailFunnieTV3 жыл бұрын
Did you mess with the heads any valve terrain I herd putting cams will destroy your valve after 5 to 6 months driving
@SomeWheelsRequired3 жыл бұрын
No, stock heads. The frpp cams do not require any sort of valve spring or phaser modifications.
@pauljace93523 жыл бұрын
Love the spoiler. Where’d u get it?
@SomeWheelsRequired3 жыл бұрын
Thanks! It's a gt500 spoiler I got from "thespoilerstore" on eBay. I went for the prepainted listing. Good quality, and paint quality was pretty good.
@brluvcars48483 жыл бұрын
Team 3v
@2vPhil3 жыл бұрын
Are you still running this set up?? Saw your description and noticed that you were planning on getting different mufflers. Was wondering if I could buy your corsas when you're done with em. I've been planning on retrofitting corsas on my 2v mustang for awhile and ive never seen anyone do em but finding them used is extremely hard/rare.
@SomeWheelsRequired3 жыл бұрын
I'm not running them currently, I'll let you know if I plan to get rid of them! Want to spend some time with the new ones first.
@2vPhil3 жыл бұрын
@@SomeWheelsRequired sounds good I really appreciate it 🤙🏽
@chrisbowers69023 жыл бұрын
I'd reckon a set of magna packs or kooks equivalents mid mounted would do the trick
@jimbrow832 жыл бұрын
I had mid mounted maganapakz pretty much killed the cam lope barely could hear it was all bass sounding
@ThatLoud3v3 жыл бұрын
Damn shes sounds so good😲😍
@SomeWheelsRequired3 жыл бұрын
Thanks!
@braninagt35473 жыл бұрын
what tire set up are you using?
@SomeWheelsRequired3 жыл бұрын
Nt555 G2 in front, Nt555r in back in 305/45/18 variety.
@krealcaproll3 жыл бұрын
@@SomeWheelsRequired stock rims?
@SomeWheelsRequired3 жыл бұрын
@@krealcaproll no, 18x9 front and 18x10 rear bullitt style wheels
@krealcaproll3 жыл бұрын
@@SomeWheelsRequired and offset, please, for full picture :)))
@SomeWheelsRequired3 жыл бұрын
@@krealcaproll +30mm front, +45mm rear
@Ruby5.03 жыл бұрын
Love this sound! Thinking about getting another 3v again. Would you recommend the corsas? Or go quieter?
@SomeWheelsRequired3 жыл бұрын
Thanks! All depends what you want. One person's loud is another's mellow, however I can't imagine anyone would think this was quiet. People run this setup with corsa extremes though, so there's definitely people who like it. If you want pretty loud but still have tone (no open headers or straight pipe for example), I can't recommend them enough. Nice tone, ok volume when cruising with zero drone, and the idle chop and crispness from the cams with the corsas cannot be beat. I will say everyone within a few miles radius will know when you're getting on it. I just decided I wanted quieter, so have a set of borla tourings on order. We'll see how I like those!
@Ruby5.03 жыл бұрын
@@SomeWheelsRequired I don’t think you could have explained that any better. Thank you so much! Gonna be picking up my new 3v here soon and I’m gonna have to look into them. If you plan on doing a video of the Borlas I’ll wait and watch that first before I order them.
@SomeWheelsRequired3 жыл бұрын
@@Ruby5.0 glad I could help! All depends on what you want for a header setup as well, I imagine the corsas would be a lot more mellow with a catted mid pipe. I'll be getting the borlas on asap, though the salt trucks have hit hard here in Wisconsin so it may be a bit until I get a video unfortunately. I'll get one up as soon as I'm able to though!
@Ruby5.03 жыл бұрын
@@SomeWheelsRequired looking forward to it man! 🤘🏻🤘🏻
@Marina-de8cl3 жыл бұрын
How many miles?
@SomeWheelsRequired3 жыл бұрын
It's got about 76k on it right now.
@gr01493 жыл бұрын
Whats the MPG after these cams are fitted? Is it still a daily? Sounds amazing.
@SomeWheelsRequired3 жыл бұрын
Thank you! It's been a few years, but I do remember a slight decrease from stock. Cannot remember a specific number unfortunately.
@gr01493 жыл бұрын
@@SomeWheelsRequired ok thanks for that, I'm in the UK and fuel here is pretty expensive and it sucks haha.
@SomeWheelsRequired3 жыл бұрын
@@gr0149 that's pretty cool! I definitely understand though. It wasn't an overly drastic change, but when you're paying a lot every bit helps.
@ozfex32873 жыл бұрын
Itll be around 10-12. Possibly a little higher if you're not stepping on it too much with all the mods. 20-24 on the highway tho.
@AtomsForFuel2 жыл бұрын
I get about 12mpg city with the ford hot rod cams and tr-3650 5 speed and I shift at 2000rpm. Highway with AC off I get 22-23.5 mpg highway at 55mph. Most of your mpg changes are gonna come from your gearing and tire sizes
@Browean4 жыл бұрын
How the headers/h pipe holding up? Any problems?
@SomeWheelsRequired4 жыл бұрын
Absolutely no issues!
@ese3v3 жыл бұрын
@@SomeWheelsRequired could you send a link to the headers and h pipe please I can’t seem to find a cat less h pipe for lth
@SomeWheelsRequired3 жыл бұрын
@@ese3v I can't seem to find the h pipe anymore. I know there's been a recent crack down on aftermarket with regards to emissions, so I'm guessing it likely has to do with that unfortunately.
@chriswarren4554 жыл бұрын
What's your ET in the 1\4? If it doesn't pick up on the track, you cammed it for no gain! My Son's car, not cammed runs 13.29 @ 101mph. Cold air, throttle body spacer and x pipe automatic. Thunder Valley, Noble, Ok.
@SomeWheelsRequired4 жыл бұрын
My car picked up a few tenths but was still in the low 13's. Biggest thing was I consistently trapped 108-110, not 101, indicating it could pretty easily be a 12 second car with good tires, a 60' better than 2.4, and a better driver. It's been quite a few years since it's been on the track, and it's procharged now. Whether I picked up time or not, it's well documented you'll get some power out of these, and not have "no gain" as you seem to think I did. Are there better options out there with more work involved? Of course. Throttle body spacers are worthless on these cars by the way. That's a nice time to run for an almost stock car regardless.
@jimbrow834 жыл бұрын
Do you still have the car? You located in mass? Sounds good
@SomeWheelsRequired4 жыл бұрын
Yup still have the car. I was in Illinois at the time, in Wisconsin now. And thanks!
@roberto3v594 жыл бұрын
How much power is it making?
@SomeWheelsRequired4 жыл бұрын
I've never had it dyno'd, but in this video it should have been somewhere between 325 and 350 rwhp from comparable builds. With the procharger now on it, it's probably around 425-450 give or take to the wheel. With the cams I was running a Bama tune, now running a Lito tune.
@roberto3v594 жыл бұрын
Yea I have a 2009 GT it’s getting cams, headers, pulley, and 3.73 gears this weekend but I’m trying to figure out what kind of power it’ll make . Getting a custom dyno tune
@SomeWheelsRequired4 жыл бұрын
@@roberto3v59 should be pretty healthy. What cams are you going with?
@roberto3v594 жыл бұрын
The same ones, hot rod cams, that’s why I saw the video lol, I got an SLp xpipe on it now most likely getting a nos kit too
@SomeWheelsRequired4 жыл бұрын
@@roberto3v59 very nice, should be plenty rowdy then haha
@fercho52894 жыл бұрын
Is the exhaust piping 2.5? Also i read a comment you were about to install a procharger, if you did, did you keep the same exhaust piping size? Thanks!
@SomeWheelsRequired4 жыл бұрын
Yes it is 2.5" piping, and yes I did keep the same size.
@LordCornholio314 жыл бұрын
Sounds nice, I bought my moms 05 gt, how hard is it to install those cams and what else do you have done in this video?
@SomeWheelsRequired4 жыл бұрын
Depending how mechanically inclined you are, they're not bad at all. Do your research, take your time, double check every step, and you'll do fine. I suggest buying the timing wedge tool personally. In this video it was just your basic JLT intake, full exhaust, and the cams. Now it's procharged with Corsa sport mufflers swapped in place of the SSS Adrenaline's.
@marshallt.barnes44475 жыл бұрын
Hey Bro! I want to make a real hot rod. Found a version of the machine for tuning. incacar.com/used/cars/ford/mustang/1993-Ford-Mustang-LX-433394/ What is your opinion?
@davidcampos29596 жыл бұрын
Were your h pipes catted?
@SomeWheelsRequired6 жыл бұрын
Campos S197 Nope, this video is catless.
@justinhendrickson66256 жыл бұрын
What's your idle set at?
@SomeWheelsRequired6 жыл бұрын
justin hendrickson 720 rpm.
@02DDP6 жыл бұрын
All you need now is 62mm throttle body, imrc delete kit, under drive pulleys, and 3.73 gears. that should add a bit more fun to it.
@SomeWheelsRequired6 жыл бұрын
eccentric aquarius 85 I've got a procharger waiting to go on along with a few other goodies, should be plenty fun! Lol
@02DDP6 жыл бұрын
AnotherS197 awesome! Can't wait to check out vids of it in the future.
@MrAnthony2456 Жыл бұрын
Whats the imrc delete kit?
@02DDP Жыл бұрын
@@MrAnthony2456 spacer plates thats put in place of the stock intake manifold runner control valves. Will require a tune to disable the imrc system if going in the same vehicle.
Пікірлер
I’m buying a 3v as soon as I turn 16
Awesome! Enjoy it, it's a great platform.
That sounds nasty. Love it.
Thanks!
😊❤
What did you add intake-wise with this cam? Just curious if I can run the stock intake and throttle body w/ tune atm.
Yes you can, this setup was fully stock intake and throttle body. With the current procharger setup, I'm still running stock TB and intake with the exception of imrc deletes.
i come back to this video all the timeee
Glad you enjoy it!
@@SomeWheelsRequired it’s literally therapy for me bro thank you!
@@MikeGubisch absolutely!
Does this require a tune to start? Sounds great
Should be able to get it started without a tune. Would only ever use that to get it on a trailer if that's what you're getting at.
💓
Hey did it feel faster of the line with the cams or did it feel slower?
I felt that it was faster.
@@SomeWheelsRequired cool is it automatic ?
@@moisesmoreno4826 nope, it is a manual.
Love the channel name
Thank you!
You get the borlas on I have pretty much same set up and look for cleaner exhaust note
Yup! They definitely have a good sound. I'll be posting up a video soon as I finally got footage of it.
@@SomeWheelsRequired yea need some cleaner then the Flowmaster with cams wanting to get rid of drone and the tinnxan sound from cams
godly
Don’t lie we all know that last clip sounded like a vette
Sounds like a 3 valve with corsas to me! 🤣 In all honesty the corsas have an extremely distinct sound no matter the car they're on, and I did feel I lost a bit of the 3 valve characteristic sound when I had these on. Still sounded fantastic though!
Yeah still sounds great! I want to do something like that to mine but I just took the mufflers off and straight piped it
Sounds good I can't wait to be done with my build then boost and meth injection..I just installed my frpp cams, bottom end is getting rebuilt
Sounds like a good time!
What axle back?
SSS Adrenaline axle backs. Not sure they make them anymore, but I've read the LMR SVE branded axle backs are the same thing. Can't promise that though.
Hows it going, bud? Quick question, how are the Pypes long tubes and H pipe holding up? I picked up a 2006 GT recently and am considering Pypes lt's, catted H-pipe and a Borla stinger cat back.
I've had them on the car for probably 8 years or so, and actually picked them up used. No issues at all.
@@SomeWheelsRequired Thanks for the response, man. I appreciate it. Take care.
Heavily considering getting a 3v instead of a new GT. They sound so raw bruh
They definitely have a unique sound!
What did you end up going with? I am between those two cars also. The new gt is faster and has more tech but the 3v sounds and looks better
Need cats to clean up the sound
I'm in the market for a V8 with cramming in mind. I'm guessing you've been running this cam for a while now? Any major repairs you've come across that's mostly due to the cam? The GT sounds mean, btw!
Thanks! No issues to report. Has also been supercharged for a good while now.
Great build ! and sounds badass 💪🏻💪🏻
Thank you!
That sounds like heaven. Im so tempted to get em but the price tag is ridiculous.
Thanks! They for sure aren't cheap, but they're definitely a good exhaust and nothing else sounds like them.
Ha I have the same exact plate number
Needs an ls
What mufflers did you end up going with?
I went with Borla Touring mufflers.
@@SomeWheelsRequired How are they? I know those are decently quiet. I recently put on my old American Thunder 60 series mufflers, replacing my Outlaws. It sounds good, but it's way too quiet!
@@linkinparkdrift significantly quieter. I'm happy with the volume honestly, quiet enough when cruising and at idle if I have law enforcement behind me, but they bark well when you get on it. I absolutely miss the corsas sometimes, especially the crispness with the cam chop, but I'm thinking I'll stick with the tourings long term. Just wish they were as quiet in the cabin as the corsas. I'm assuming the supercharger contributes to the drone I get with them that others haven't.
@@SomeWheelsRequired I'm actually surprised that the Corsas are that quiet inside. I've never experienced them. Only from the outside and they are ear piercing lol. How are they compared to your old SSS mufflers. I believe those are Borla S-Type knockoffs, I might be wrong though.
@@linkinparkdrift yup you're correct on the sss mufflers. They're absolutely awful drone wise. The corsas you can definitely hear inside, it just doesn't have the ear piercing deep drone. The tourings are a good in between.
This may sound dumb but I have a 08 and needed to know if I can pair ANY Longtube headers with any x pipe I was gonna do like the pypes x pipe cut and clamp with bbk long tubes since I called pypes and they are on back order for 6 months on there long tubes and now have catted x pipes only so can I pair long tube headers or shorty headers with any x pipe ?
Some mate up, most do not. I believe I've read kooks mid pipes fit pypes headers, but that's about where it ends unfortunately. The cut and clamp x pipe is strictly meant to replace the small h cross over portion of your stock midpipe, nothing else. You can pair shorty headers with any mid pipe that is designed to be an exact replacement of the stock midpipe as each are designed to be replaced independently of each other, but I wouldn't bother with shorties personally.
@ some wheels required are you selling your long tubes or where did you buy the pypes long tube headers?
@@seraph7744 I am not selling them, no. I picked them up used probably around 8 years ago.
I love those better than 200 mustang 🏆🏆🏆🔥🔥🔥🔥🏆🚘🏎🏎👍🏾👍🏾🏎🏎🚘🚘🏆
🏆🏆🏆🔥🔥🔥🔥🏎🏎🏎🏎🚘🚘🏆🏆🔥👍🏾👍🏾👍🏾🏎🏎🚘🏆🏆🔥🥇
Hi, are you selling the corsa sport axle backs?
I am not at the moment, sorry! Hanging onto them for now.
I really like the way it looks. Could you tell please what is the rear diffuser model?
Thanks! Hit up brandon66polar on Instagram. He makes them!
Sounds amazing
Thanks!
That's a hell of a setup!
Thanks!!
Did you mess with the heads any valve terrain I herd putting cams will destroy your valve after 5 to 6 months driving
No, stock heads. The frpp cams do not require any sort of valve spring or phaser modifications.
Love the spoiler. Where’d u get it?
Thanks! It's a gt500 spoiler I got from "thespoilerstore" on eBay. I went for the prepainted listing. Good quality, and paint quality was pretty good.
Team 3v
Are you still running this set up?? Saw your description and noticed that you were planning on getting different mufflers. Was wondering if I could buy your corsas when you're done with em. I've been planning on retrofitting corsas on my 2v mustang for awhile and ive never seen anyone do em but finding them used is extremely hard/rare.
I'm not running them currently, I'll let you know if I plan to get rid of them! Want to spend some time with the new ones first.
@@SomeWheelsRequired sounds good I really appreciate it 🤙🏽
I'd reckon a set of magna packs or kooks equivalents mid mounted would do the trick
I had mid mounted maganapakz pretty much killed the cam lope barely could hear it was all bass sounding
Damn shes sounds so good😲😍
Thanks!
what tire set up are you using?
Nt555 G2 in front, Nt555r in back in 305/45/18 variety.
@@SomeWheelsRequired stock rims?
@@krealcaproll no, 18x9 front and 18x10 rear bullitt style wheels
@@SomeWheelsRequired and offset, please, for full picture :)))
@@krealcaproll +30mm front, +45mm rear
Love this sound! Thinking about getting another 3v again. Would you recommend the corsas? Or go quieter?
Thanks! All depends what you want. One person's loud is another's mellow, however I can't imagine anyone would think this was quiet. People run this setup with corsa extremes though, so there's definitely people who like it. If you want pretty loud but still have tone (no open headers or straight pipe for example), I can't recommend them enough. Nice tone, ok volume when cruising with zero drone, and the idle chop and crispness from the cams with the corsas cannot be beat. I will say everyone within a few miles radius will know when you're getting on it. I just decided I wanted quieter, so have a set of borla tourings on order. We'll see how I like those!
@@SomeWheelsRequired I don’t think you could have explained that any better. Thank you so much! Gonna be picking up my new 3v here soon and I’m gonna have to look into them. If you plan on doing a video of the Borlas I’ll wait and watch that first before I order them.
@@Ruby5.0 glad I could help! All depends on what you want for a header setup as well, I imagine the corsas would be a lot more mellow with a catted mid pipe. I'll be getting the borlas on asap, though the salt trucks have hit hard here in Wisconsin so it may be a bit until I get a video unfortunately. I'll get one up as soon as I'm able to though!
@@SomeWheelsRequired looking forward to it man! 🤘🏻🤘🏻
How many miles?
It's got about 76k on it right now.
Whats the MPG after these cams are fitted? Is it still a daily? Sounds amazing.
Thank you! It's been a few years, but I do remember a slight decrease from stock. Cannot remember a specific number unfortunately.
@@SomeWheelsRequired ok thanks for that, I'm in the UK and fuel here is pretty expensive and it sucks haha.
@@gr0149 that's pretty cool! I definitely understand though. It wasn't an overly drastic change, but when you're paying a lot every bit helps.
Itll be around 10-12. Possibly a little higher if you're not stepping on it too much with all the mods. 20-24 on the highway tho.
I get about 12mpg city with the ford hot rod cams and tr-3650 5 speed and I shift at 2000rpm. Highway with AC off I get 22-23.5 mpg highway at 55mph. Most of your mpg changes are gonna come from your gearing and tire sizes
How the headers/h pipe holding up? Any problems?
Absolutely no issues!
@@SomeWheelsRequired could you send a link to the headers and h pipe please I can’t seem to find a cat less h pipe for lth
@@ese3v I can't seem to find the h pipe anymore. I know there's been a recent crack down on aftermarket with regards to emissions, so I'm guessing it likely has to do with that unfortunately.
What's your ET in the 1\4? If it doesn't pick up on the track, you cammed it for no gain! My Son's car, not cammed runs 13.29 @ 101mph. Cold air, throttle body spacer and x pipe automatic. Thunder Valley, Noble, Ok.
My car picked up a few tenths but was still in the low 13's. Biggest thing was I consistently trapped 108-110, not 101, indicating it could pretty easily be a 12 second car with good tires, a 60' better than 2.4, and a better driver. It's been quite a few years since it's been on the track, and it's procharged now. Whether I picked up time or not, it's well documented you'll get some power out of these, and not have "no gain" as you seem to think I did. Are there better options out there with more work involved? Of course. Throttle body spacers are worthless on these cars by the way. That's a nice time to run for an almost stock car regardless.
Do you still have the car? You located in mass? Sounds good
Yup still have the car. I was in Illinois at the time, in Wisconsin now. And thanks!
How much power is it making?
I've never had it dyno'd, but in this video it should have been somewhere between 325 and 350 rwhp from comparable builds. With the procharger now on it, it's probably around 425-450 give or take to the wheel. With the cams I was running a Bama tune, now running a Lito tune.
Yea I have a 2009 GT it’s getting cams, headers, pulley, and 3.73 gears this weekend but I’m trying to figure out what kind of power it’ll make . Getting a custom dyno tune
@@roberto3v59 should be pretty healthy. What cams are you going with?
The same ones, hot rod cams, that’s why I saw the video lol, I got an SLp xpipe on it now most likely getting a nos kit too
@@roberto3v59 very nice, should be plenty rowdy then haha
Is the exhaust piping 2.5? Also i read a comment you were about to install a procharger, if you did, did you keep the same exhaust piping size? Thanks!
Yes it is 2.5" piping, and yes I did keep the same size.
Sounds nice, I bought my moms 05 gt, how hard is it to install those cams and what else do you have done in this video?
Depending how mechanically inclined you are, they're not bad at all. Do your research, take your time, double check every step, and you'll do fine. I suggest buying the timing wedge tool personally. In this video it was just your basic JLT intake, full exhaust, and the cams. Now it's procharged with Corsa sport mufflers swapped in place of the SSS Adrenaline's.
Hey Bro! I want to make a real hot rod. Found a version of the machine for tuning. incacar.com/used/cars/ford/mustang/1993-Ford-Mustang-LX-433394/ What is your opinion?
Were your h pipes catted?
Campos S197 Nope, this video is catless.
What's your idle set at?
justin hendrickson 720 rpm.
All you need now is 62mm throttle body, imrc delete kit, under drive pulleys, and 3.73 gears. that should add a bit more fun to it.
eccentric aquarius 85 I've got a procharger waiting to go on along with a few other goodies, should be plenty fun! Lol
AnotherS197 awesome! Can't wait to check out vids of it in the future.
Whats the imrc delete kit?
@@MrAnthony2456 spacer plates thats put in place of the stock intake manifold runner control valves. Will require a tune to disable the imrc system if going in the same vehicle.
@@02DDP ahhh I seen a video about that !